Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

LANDSAT and radar mapping of intrusive rocks in SE-Brazil

The feasibility of intrusive rock mapping was investigated and criteria for regional geological mapping established at the scale of 1:500,00 in polycyclic and polymetamorphic areas using the logic method of photointerpretation of LANDSAT imagery and radar from the RADAMBRASIL project. The spectral behavior of intrusive rocks, was evaluated using the interactive multispectral image analysis system (Image-100). The region of Campos (city) in northern Rio de Janeiro State was selected as the study area and digital imagery processing and pattern recognition techniques were applied. Various maps at the 2:250,000 scale were obtained to evaluate the results of automatic data processing.

Parada, N. D. J.↗

Method of increasing minority carrier lifetime in silicon web or the like

A silicon dendrite is grown as a ribbon forming two silicon crystal layers which are separated by an interface layer which contains a large number of defects. Significant increase of minority carrier lifetime with homogeneous distribution at the outer surfaces of the two silicon crystal layers is achieved by processing the web in an atmosphere of a selected gas, e.g., oxygen, nitrogen or an inert gas, for about 30 minutes to several hours at a temperature preferably on the order of 900 to 1200 C.

Liu, J. K.↗

A network control concept for the 30/20 GHz communication system baseband processor

The architecture and system design for a satellite-switched TDMA communication system employing on-board processing was developed by Motorola for NASA's Lewis Research Center. The system design is based on distributed processing techniques that provide extreme flexibility in the selection of a network control protocol without impacting the satellite or ground terminal hardware. A network control concept that includes system synchronization and allows burst synchronization to occur within the system operational requirement is described. This concept integrates the tracking and control links with the communication links via the baseband processor, resulting in an autonomous system operational approach.

Sabourin, D. J.↗

Analysis and testing of a new method for drop size measurement using laser scatter interferometry

Research was conducted on a laser light scatter detection method for measuring the size and velocity of spherical particles. The method is based upon the measurement of the interference fringe pattern produced by spheres passing through the intersection of two laser beams. A theoretical analysis of the method was carried out using the geometrical optics theory. Experimental verification of the theory was obtained by using monodisperse droplet streams. Several optical configurations were tested to identify all of the parametric effects upon the size measurements. Both off-axis forward and backscatter light detection were utilized. Simulated spray environments and fuel spray nozzles were used in the evaluation of the method. The measurements of the monodisperse drops showed complete agreement with the theoretical predictions. The method was demonstrated to be independent of the beam intensity and extinction resulting from the surrounding drops. Signal processing concepts were considered and a method was selected for development.

Bachalo, W. D.↗

A conservative treatment of zonal boundaries for Euler equation calculations

Finite-difference calculations require the generation of a grid for the region of interest. A zonal approach, wherein the given region is subdivided into zones and the grid for each zone is generated independently, makes the grid-generation process for complicated topologies and for regions requiring selective grid refinement a fairly simple task. This approach results in new boundaries within the given region, that is, zonal boundaries at the interfaces of the various zones. The zonal-boundary scheme (the integration scheme used to update the points on the zonal boundary) for the Euler equations must be conservative, accurate, stable, and applicable to general curvilinear coordinate systems. A zonal-boundary scheme with these desirable properties is developed in this study. The scheme is designed for explicit, first-order-accurate integration schemes but can be modified to accommodate second-order-accurate explicit and implicit integration schemes. Results for inviscid flow, including supersonic flow over a cylinder, blast-wave diffraction by a ramp, and one-dimensional shock-tube flow are obtained on zonal grids. The conservative nature of the zonal-boundary scheme permits the smooth transition of the discontinuities associated with these flows from one zone to another. The calculations also demonstrate the continuity of contour lines across zonal boundaries that can be achieved with the present zonal scheme.

Rai, M. M.↗

Single beam synthesis from thinned arrays

Radio astronomers have investigated spatial frequencies and their relationship to apertures with the objective to improve the resolution in radio observations. Welch (1965) has related Fourier transform theory developed for linear communications to aperture design problems, while Fakley (1959) has conducted a comparison between the performances of a time-averaged product array and an intraclass correlator. The present investigation is concerned with an approach which resembles very closely the intraclass correlator system considered by Fakley. A description is presented of a process whereby a thinned array of elements samples selected spatial frequencies from a uniform signal wave front incident on the array. The spatial frequencies are used to generate a set of synthetic spatial frequencies which behave as though they had been sampled by a fully filled array. Beam formation is obtained by summing the set of synthetic spatial frequencies.

Kaiser, J. A., Jr.↗

Manufacturing and producibility technology

Activities of the manufacturing/producibility working group within the Advanced High-Pressure O2/H2 Technology Program are summarized. The objectives of the M/P working group are: to develop and evaluate process and manufacturing techniques for advanced propulsion hardware design and selected materials; and to optimize the producibility of (SSME) components and assemblies by improved performance, increased life, greater reliability, and/or reduced cost. The technologies being developed include: plasma arc, laser, and inertia welding; combustion chamber and turbine blade coatings; coating processes; high performance alloy electroforming; and process control technology.

Hankins, J. D.↗

Application of laser-velocimetry to the study of the flow around a two-dimensional airfoil

The experimental techniques employed by NASA researchers to obtain a high volume throughput of data in a study of high-lift multielement airfoils using a laser velocimeter (LV) are detailed. The two-dimensional LV system recorded mean velocity, turbulence intensities, Re shear stresses, skewness and kurtosis of the flow. A computer-controlled positioning mount for the LV allowed automated surveys of the flows with a 0.001 in. positioning accuracy. The flow was seeded with oil droplets and additional refinement of the wind tunnel controls permitted rapid speedup at selected areas of the flowfield over specific regions of the airfoil. Surface pressure taps furnished data for selecting regions for more detailed investigation. The data processing capabilities processed 30-40 samples every 10 min in an automated mode. Profiles of the data were computed automatically to furnish graphical displays on demand. Numerous samples of the data displays generated are provided.

Braden, J. A.↗

A computer controlled signal preprocessor for laser fringe anemometer applications

The operation of most commercially available laser fringe anemometer (LFA) counter-processors assumes that adjustments are made to the signal processing independent of the computer used for reducing the data acquired. Not only does the researcher desire a record of these parameters attached to the data acquired, but changes in flow conditions generally require that these settings be changed to improve data quality. Because of this limitation, on-line modification of the data acquisition parameters can be difficult and time consuming. A computer-controlled signal preprocessor has been developed which makes possible this optimization of the photomultiplier signal as a normal part of the data acquisition process. It allows computer control of the filter selection, signal gain, and photo-multiplier voltage. The raw signal from the photomultiplier tube is input to the preprocessor which, under the control of a digital computer, filters the signal and amplifies it to an acceptable level. The counter-processor used at Lewis Research Center generates the particle interarrival times, as well as the time-of-flight of the particle through the probe volume. The signal preprocessor allows computer control of the acquisition of these data.Through the preprocessor, the computer also can control the hand shaking signals for the interface between itself and the counter-processor. Finally, the signal preprocessor splits the pedestal from the signal before filtering, and monitors the photo-multiplier dc current, sends a signal proportional to this current to the computer through an analog to digital converter, and provides an alarm if the current exceeds a predefined maximum. Complete drawings and explanations are provided in the text as well as a sample interface program for use with the data acquisition software.

Oberle, Lawrence G.↗

Investigation of the reaction of liquid hydrogen with liquid air in a pressure tube

A pressure tube should protect the FR-2 reactor from the consequences of a hydrogen-air reaction, which is conceivable in the breakdown of several safety devices of the planned cold neutron source Project FR-2/16. The magnitudes and time pattern of the pressures to be expected were investigated. In the geometry used and the ignition mechanism selected, which is comparable to the strongest ignition process conceivable in the reactor, the reaction proceeds with greater probability than combustion. The combustion is possibly smaller if local limited partial detonations are superimposed. The magnitude of the pressure was determined by the masses of the reaction partners, liquid H2 and liquid air, and determines their ratio to each other.

Karb, Erich H.↗

An analysis of redundancy management algorithms for asynchronous fault tolerant control systems

Redundancy management algorithms, commonly referred to as voters, are algorithms used in fault-tolerant control systems to vote on incoming redundant data, isolate bad signals, and output a single good value. In a synchronous environment, this algorithm is a straightforward signal-to-signal comparison with relatively low complexity. The technology of asynchronous control systems, recently realized in the Ultrareliable Fault Tolerant Control System research program at NASA Ames Research Center, requires more complex algorithms for fault detection and signal selection. A variety of algorithms used for this process, a means of testing them, and their basic performance under a simulated environment of the ultrareliable fault-tolerant control system are presented.

Davis, Gloria J.↗

Machine-aided indexing for NASA STI

One of the major components of the NASA/STI processing system is machine-aided indexing (MAI). MAI is a computer process that generates a set of indexing terms selected from NASA's thesaurus, is used for indexing technical reports, is based on text, and is reviewed by indexers. This paper summarizes the MAI objectives and discusses the NASA Lexical Dictionary, subject switching, and phrase matching or natural languages. The benefits of using MAI are mentioned, and MAI production improvement and the future of MAI are briefly addressed.

Wilson, John↗

Signal processing applied to photothermal techniques for materials characterization

There is a need to make noncontact measurements of material characteristics in the microgravity environment. Photothermal and photoacoustics techniques offer one approach for attaining this capability since lasers can be used to generate the required thermal or acoustic signals. The perturbations in the materials that can be used for characterization can be detected by optical reflectance, infrared detection or laser detection of photoacoustics. However, some of these laser techniques have disadvantages of either high energy pulsed excitation or low signal-to-noise ratio. Alternative signal processing techniques that have been developed can be applied to photothermal or photoacoustic instrumentation. One fully coherent spread spectrum signal processing technique is called time delay spectrometry (TDS). With TDS the system is excited using a combined frequency-time domain by employing a linear frequency sweep excitation function. The processed received signal can provide either frequency, phase or improved time resolution. This signal processing technique was shown to outperform other time selective techniques with respect to noise rejection and was recently applied to photothermal instrumentation. The technique yields the mathematical equivalent of pulses yet the input irradiances are orders of magnitude less than pulses with the concomitant reduction in perturbation of the sample and can increase the capability of photothermal methods for materials characterization.

Rooney, James A.↗

Modular VLSI Reed-Solomon Decoder

Proposed Reed-Solomon decoder contains multiple very-large-scale integrated (VLSI) circuit chips of same type. Each chip contains sets of logic cells and subcells performing functions from all stages of decoding process. Full decoder assembled by concatenating chips, with selective utilization of cells in particular chips. Cost of development reduced by factor of 5. In addition, decoder programmable in field and switched between 8-bit and 10-bit symbol sizes.

Hsu, In-Shek↗

General purpose intelligent sensor interface

The long range goal is to develop an intelligent sensor system that will simplify the design and development of expert systems that use sensors of physical phenomena as a source of input data. This phase of the research concentrated on the integration of image processing sensors with expert system environments. The anticipated result of this research is the ability to design systems in which the user will not need to be an expert in such areas as image processing algorithms, local area networks, image processor hardware selection or interfacing, or television cameras selection. The user will be able to access data from video sensors through standard expert system statements without any need to know about the sensor hardware or software.

Mckee, J. W.↗

ECLSS regenerative systems comparative testing and subsystem selection

In support of Space Station Freedom Phase C/D Environmental Control and Life Support Systems (ECLSS) regenerative systems development, comparative testing was performed on predevelopment hardware of competing technologies for each regenerative function. The purpose of the test program was to collect data on latest generation hardware in order to make final technology selections for each subassembly in the oxygen recovery and water reclamation strings. This paper discusses the testing performed, test results, and evaluation of these results relative to subsystem selections for CO2 reduction, O2 generation, potable water processing, hygiene water processing, and urine processing.

Carasquillo, Robyn L.↗

An approach to integrating and creating flexible software environments

Engineers and scientists are attempting to represent, analyze, and reason about increasingly complex systems. Many researchers have been developing new ways of creating increasingly open environments. In this research on VEHICLES, a conceptual design environment for space systems, an approach was developed, called 'wrapping', to flexibility and integration based on the collection and then processing of explicit qualitative descriptions of all the software resources in the environment. Currently, a simulation is available, VSIM, used to study both the types of wrapping descriptions and the processes necessary to use the metaknowledge to combine, select, adapt, and explain some of the software resources used in VEHICLES. What was learned about the types of knowledge necessary for the wrapping approach is described along with the implications of wrapping for several key software engineering issues.

Bellman, Kirstie L.↗

Thermoforming from a systems viewpoint

The objectives of this educational exercise are the following: to be able to select and manipulate control charts to adequately reflect processing characteristics and variation; to understand how a manufacturing process can be broken down into its basic components and subsequently analyzed; and to understand how statistics, standards, and metrology are critical to manufacturing.

Wickman, Jerry L.↗