Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Predictive analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Geometry-based, Gaussian profile model for optical knife-edge displacement sensor

This article describes an analytical model for the well-known optical knife-edge displacement sensor that predicts the relationship between the knife-edge displacement and photointerrupter output. The model includes: 1) the geometry of a rectangular knife-edge profile penetrating a circular laser beam perpendicular to the beam axis; and 2) the Gaussian intensity profile for the beam cross-section. A comparison between the model predictions and measured photointerrupter for a linear range of knife-edge displacements is provided. It is shown that good agreement is obtained without model calibration.

42 ENGINEERING↗

Determination of elemental composition of shale rocks by laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) is used for elemental characterization of outcrop samples from the Marcellus Shale. Powdered samples were pressed to form pellets and used for LIBS analysis. Partial least squares regression (PLS-R) and univariate calibration curves were used for quantification of analytes. The matrix effect is substantially reduced using the partial least squares calibration method. Predicted results with LIBS are compared to ICP-OES results for Si, Al, Ti, Mg, and Ca. As for C, its results are compared to those obtained by a carbon analyzer. Relative errors of the LIBS measurements are in the range of 1.7 to 12.6%. The limits of detection (LODs) obtained for Si, Al, Ti, Mg and Ca are 60.9, 33.0, 15.6, 4.2 and 0.03 ppm, respectively. An LOD of 0.4 wt.% was obtained for carbon. Finally, this study shows that the LIBS method can provide a rapid analysis of shale samples and can potentially benefit depleted gas shale carbon storage research.

58 GEOSCIENCES↗

Model Structure and Climate Data Uncertainty in Historical Simulations of the Terrestrial Carbon Cycle (1850–2014)

Abstract The divergence among Earth system models in the terrestrial carbon cycle has prompted interest in how to reduce uncertainty. Previous studies have identified model structural uncertainty arising from process parameterizations and parameter values. The current study highlights the importance of climate forcing in generating carbon cycle uncertainty. We use simulations in which three models (Community Land Model version 4 (CLM4), CLM4.5, CLM5) with substantially different carbon cycles are forced with two climate reconstructions (CRUNCEPv7, Global Soil Wetness Project 3 version 1 (GSWP3v1)) to examine the contributions of model structure and climate to uncertainty in the carbon cycle over the period 1850–2014. Climate uncertainty for global annual net biome production exceeds one third of total uncertainty (defined as the sum of climate and model structure uncertainty) in the first half of the twentieth century, but declines after the 1950s. Global annual gross primary productivity, net primary productivity, heterotrophic respiration, and vegetation and soil carbon stocks have substantial climate uncertainty (relative to total uncertainty) throughout the simulation period. Climate forcing contributes more than one half of total uncertainty for these carbon cycle fluxes and stocks throughout boreal North America and Eurasia, some midlatitude regions, and in eastern Amazonia and western equatorial Africa during the decade 2000–2009. Comparison with observationally based data sets of the carbon cycle using model benchmarking methods provides insight into strengths and deficiencies among models and climate forcings, but we caution against overreliance on benchmarking to discriminate among models. The conceptualization of uncertainty arising from this study implies embracing multiple feasible model simulations rather than focusing on which model or simulation is best.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-order finite-Larmor-radius effects on magnetic tearing in pinch configurations

The linear and nonlinear evolution of a single-helicity tearing mode in a cylindrical, force-free pinch are investigated using a fluid model with first-order finite-Larmor-radius corrections. Linear results computed with the nimrod[nonideal magnetohydrodynamics (MHD) with rotation, open discussion] code [Sovinec et al., J. Comput. Phys. 195, 355 (2004)] produce a regime at small {rho}{sub s} where the growth rate is reduced relative to resistive MHD, though the Hall term is not significant. The leading order contributions from ion gyroviscosity may be expressed as a drift associated with {nabla}B{sub 0} and poloidal curvature for experimentally relevant {beta}=0.1, S{approx}10{sup 5}-10{sup 6} force-free equilibria. The heuristic analytical dispersion relation, {gamma}{sup 4}({gamma}-i{omega}{sub *gv})={gamma}{sub MHD}{sup 5} where {omega}{sub *gv} is the gyroviscous drift frequency, confirms numerical results. The behavior of our cylindrical computations at large {rho}{sub s} corroborates previous analytic slab studies where an enhanced growth rate and radially localized Hall dynamo are predicted. Similar to previous drift-tearing results, nonlinear computations with cold ions demonstrate that the Hall dynamo is small when the island width is large in comparison with the scale for electron-ion coupling. The saturation is then determined by the resistive MHD physics. However, with warm ions the gyroviscous stress supplements the nonlinear Lorentz force, and the saturated island width is reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Subharmonic excitation in amplitude modulation atomic force microscopy in the presence of adsorbed water layers

In ambient conditions, nanometric water layers form on hydrophilic surfaces covering them and significantly changing their properties and characteristics. Here we report the excitation of subharmonics in amplitude modulation atomic force microscopy induced by intermittent water contacts. Our simulations show that there are several regimes of operation depending on whether there is perturbation of water layers. Single period orbitals, where subharmonics are never induced, follow only when the tip is either in permanent contact with the water layers or in pure noncontact where the water layers are never perturbed. When the water layers are perturbed subharmonic excitation increases with decreasing oscillation amplitude. We derive an analytical expression which establishes whether water perturbations compromise harmonic motion and show that the predictions are in agreement with numerical simulations. Empirical validation of our interpretation is provided by the observation of a range of values for apparent height of water layers when subharmonic excitation is predicted.

36 MATERIALS SCIENCE↗

Reaction enhancement of initially distant scalars by Lagrangian coherent structures

Turbulent fluid flows have long been recognized as a superior means of diluting initial concentrations of scalars due to rapid stirring. Conversely, experiments have shown that the structures responsible for this rapid dilution can also aggregate initially distant reactive scalars and thereby greatly enhance reaction rates. Indeed, chaotic flows not only enhance dilution by shearing and stretching but also organize initially distant scalars along transiently attracting regions in the flow. To show the robustness of this phenomenon, a hierarchical set of three numerical flows is used: the periodic wake downstream of a stationary cylinder, a chaotic double gyre flow, and a chaotic, aperiodic flow consisting of interacting Taylor vortices. We demonstrate that Lagrangian coherent structures (LCS), as identified by ridges in finite time Lyapunov exponents, are directly responsible for this coalescence of reactive scalar filaments. When highly concentrated filaments coalesce, reaction rates can be orders of magnitude greater than would be predicted in a well-mixed system. This is further supported by an idealized, analytical model that was developed to quantify the competing effects of scalar dilution and coalescence. Chaotic flows, known for their ability to efficiently dilute scalars, therefore have the competing effect of organizing initially distant scalars along the LCS at timescales shorter than that required for dilution, resulting in reaction enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

End-anchored polymers in good solvents from the single chain limit to high anchoring densities

An increasing number of applications utilize grafted polymer layers to alter the interfacial properties of solid substrates, motivating refinement in our theoretical understanding of such layers. To assess existing theoretical models of them, we have investigated end-anchored polymer layers over a wide range of grafting densities, σ, ranging from a single chain to high anchoring density limits, chain lengths ranging over two orders of magnitude, for very good and marginally good solvent conditions. We compare Monte Carlo and molecular dynamics simulations, numerical self-consistent field calculations, and experimental measurements of the average layer thickness, h, with renormalization group theory, the Alexander–de Gennes mushroom theory, and the classical brush theory. Our simulations clearly indicate that appreciable inter-chain interactions exist at all simulated areal anchoring densities so that there is no mushroom regime in which the layer thickness is independent of σ. Moreover, we find that there is no high coverage regime in which h follows the predicted scaling, h ∼ Nσ1/3, for classical polymer brushes either. Given that no completely adequate analytic theory seems to exist that spans wide ranges of N and σ, we applied scaling arguments for h as a function of a suitably defined reduced anchoring density, defined in terms of the solution radius of gyration of the polymer chains and N. We find that such a scaling approach enables a smooth, unified description of h in very good solvents over the full range of anchoring density and chain lengths, although this type of data reduction does not apply to marginal solvent quality conditions.

Whitmore, Mark D.↗

On the structure of the drifton phase space and its relation to the Rayleigh–Kuo criterion of the zonal-flow stability

The phase space of driftons (drift-wave quanta) is studied within the generalized Hasegawa–Mima collisionless-plasma model in the presence of zonal flows. This phase space is made intricate by the corrections to the drifton ray equations that were recently proposed by Parker [J. Plasma Phys. 82, 595820602 (2016)] and Ruiz et al. [Phys. Plasmas 23, 122304 (2016)]. Contrary to the traditional geometrical-optics (GO) model of the drifton dynamics, it is found that driftons can not only be trapped or passing but also accumulate spatially while experiencing indefinite growth of their momenta. In particular, it is found that the Rayleigh–Kuo threshold known from geophysics corresponds to the regime when such “runaway” trajectories are the only ones possible. On one hand, this analysis helps to visualize the development of the zonostrophic instability, particularly its nonlinear stage, which is studied here both analytically and through wave-kinetic simulations. On the other hand, the GO theory predicts that zonal flows above the Rayleigh–Kuo threshold can only grow; hence, the deterioration of intense zonal flows cannot be captured within a GO model. In particular, this means that the so-called tertiary instability of intense zonal flows cannot be adequately described within the quasilinear wave kinetic equation, contrary to some previous studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Machine Learning Method for the Forensics Attribution of Separated Plutonium

Plutonium (Pu) source attribution would be a powerful tool to support nuclear nonproliferation efforts. This capability to find the source of a Pu sample would act as a deterrent to smuggling efforts, and also help regulatory agencies verify declared nuclear activities. Work at Texas A&M University yielded a nuclear forensics methodology, which is capable of determining separated Pu’s reactor of origin, fuel burnup, and the time since irradiation (TSI)—three parameters of interest. The methodology used a set of ten intra-element isotopic ratios found in separated Pu, which was compared to a library of isotopic ratio values produced using neutronics simulations for reactors of interest. By calculating the probability that unknown Pu sample’s isotopic ratio set matched a set in the library, the methodology could predict the three parameters of interest of the sample. One shortcoming of this methodology was an inability to correctly attribute spoofed Pu, where Pu sourced from two different reactors or two different fuel burnup levels are mixed. A new methodology to rectify this vulnerability using machine learning (ML) technique is developed, instead of the maximum likelihood calculation previously used and the results are satisfactory. The ML approach leverages the existing simulated data for training the algorithm, but use them efficiently by only using intra-element isotope ratios that contribute to the attribution one of the three parameters at a time. Previously, all isotope ratios were used to attribute all three parameters together. The new methodology attributes the Pu parameters in three steps, one for each parameter, rather than resolving all of the three parameters simultaneously like the previous maximum likelihood approach. First, a support vector machine classifier with a set of seven isotopic ratios finds the reactor of origin and a set of regression models trained using gaussian process predicts the burnup with a different set of seven isotopes. Finally, TSI is calculated analytically using decay equations. Thus far, the new methodology is capable of attributing pure Pu samples and has been validated using experimental data. The next step will to be augment the classifier training data set with spoofed Pu data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DO GIANT PLANETS SURVIVE TYPE II MIGRATION?

Planetary migration is one of the most serious problems to systematically understand the observations of exoplanets. We clarify that the theoretically predicted type II, migration (like type I migration) is too fast, by developing detailed analytical arguments in which the timescale of type II migration is compared with the disk lifetime. In the disk-dominated regime, the type II migration timescale is characterized by a local viscous diffusion timescale, while the disk lifetime is characterized by a global diffusion timescale that is much longer than the local one. Even in the planet-dominated regime where the inertia of the planet mass reduces the migration speed, the timescale is still shorter than the disk lifetime except in the final disk evolution stage where the total disk mass decays below the planet mass. This suggests that most giant planets plunge into the central stars within the disk lifetime, and it contradicts the exoplanet observations that gas giants are piled up at r {approx}> 1 AU. We examine additional processes that may arise in protoplanetary disks: dead zones, photoevaporation of gas, and gas flow across a gap formed by a type II migrator. Although they make the type II migration timescale closer to the disk lifetime, we show that none of them can act as an effective barrier for rapid type II migration with the current knowledge of these processes. We point out that gas flow across a gap and the fraction of the flow accreted onto the planets are uncertain and they may have the potential to solve the problem. Much more detailed investigation for each process may be needed to explain the observed distribution of gas giants in extrasolar planetary systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of discharge polarity on streamer breakdown criterion of ambient air in a non-uniform electric field

Streamer breakdown of atmospheric air with non-uniform dc electric field in a needle-to-plate electrode configuration is studied using a semi-analytic model and experimental measurements. A high voltage (either positive or negative) is applied to a hollow needle with 0.51 mm outer diameter and 0.25 mm inner diameter separated from a planar ground electrode by a gap distance of 0.1–1.4 cm. Breakdown voltages are recorded for both positive and negative discharge polarities. Empirical relations between the critical avalanche size for streamer breakdown and the gap distance are proposed. Using these empirical relations, a semi-analytic model based on Meek's criterion for streamer breakdown is developed to accurately predict the measured breakdown voltages. It is found that for pd > 380 Torr cm (or d > 0.5 cm at one atmosphere) streamer breakdown of ambient air occurs at a lower applied voltage for a positively biased needle compared to that with a negatively biased needle, referred as the polarity effect. For pd < 380 Torr cm breakdown is attained at a lower applied voltage with a negatively biased needle compared to that with a positively biased needle, and breakdown mode transits from the polarity effect to the so called inverted polarity effect.

42 ENGINEERING↗

A RING OF POLARIZED LIGHT: EVIDENCE FOR TWISTED CORONAL MAGNETISM IN CAVITIES

Coronal prominence cavities may be manifestations of twisted or sheared magnetic fields capable of storing the energy required to drive solar eruptions. The Coronal Multi-Channel Polarimeter (CoMP), recently installed at Mauna Loa Solar Observatory, can measure polarimetric signatures of current-carrying magnetohydrodynamic (MHD) systems. For the first time, this instrument offers the capability of daily full-Sun observations of the forbidden lines of Fe XIII with high enough spatial resolution and throughput to measure polarimetric signatures of current-carrying MHD systems. By forward-calculating CoMP observables from analytic MHD models of spheromak-type magnetic flux ropes, we show that a predicted observable for such flux ropes oriented along the line of sight is a bright ring of linear polarization surrounding a region where the linear polarization strength is relatively depleted. We present CoMP observations of a coronal cavity possessing such a polarization ring.

79 ASTRONOMY AND ASTROPHYSICS↗

Disentangling the physical parameters of gaseous nebulae and galaxies

Abstract We present an analysis to disentangle the connection between physical quantities that characterize the conditions of ionized H ii regions – metallicity (Z), ionization parameter (U), and electron density (ne) – and the global stellar mass (M*) and specific star formation rate (sSFR = SFR/M*) of the host galaxies. We construct composite spectra of galaxies at 0.027 ≤ z ≤ 0.25 from Sloan Digital Sky Survey, separating the sample into bins of M* and sSFR, and estimate the nebular conditions from the emission-line flux ratios. Specially, metallicity is estimated from the direct method based on the faint auroral lines [O iii]λ4363 and [O ii]λλ7320,7330. The derived metallicities cover a range of 12 + log O/H ∼ 7.6–8.9. It is found that the three nebular parameters, Z, U, and ne, are tightly correlated with the location in the M*–sSFR plane. With simple physically motivated ansätze, we derive scaling relations between these physical quantities by performing multiregression analysis. In particular, we find that U is primarily controlled by sSFR, as U∝sSFR0.43, but also depends significantly on both Z and ne. The derived partial dependence of U∝Z−0.36 is weaker than the apparent correlation (U∝Z−1.52). The partial dependence of U on ne is found to be $U \propto n_\mathrm{e}^{-0.29}$. The scaling relations we derived are in agreement with predictions from theoretical models and observations of each aspect of the link between these quantities. Our results provide a useful set of equations to predict the nebular conditions and emission-line fluxes of galaxies in semi-analytic models.

Kashino, Daichi↗

Ground-State Properties of a One-Dimensional System of Hard Rods

A quantum Monte Carlo simulation of a system of bosonic hard rods in one dimension is presented and discussed. The calculation is exact since the analytical form of the wave function is known and is in excellent agreement with predictions obtained from asymptotic expansions valid at large distances. The analysis of the static structure factor and the pair distribution function indicates that a solidlike and a gaslike phases exist at high and low densities, respectively. The one-body density matrix decays following a power law at large distances and produces a divergence in the low density momentum distribution at k=0 which can be identified as a quasicondensate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance Model of MapReduce Iterative Applications for Hybrid Cloud Bursting

Hybrid cloud bursting (i.e., leasing temporary off-premise cloud resources to boost the overall capacity during peak utilization) can be a cost-effective way to deal with the increasing complexity of big data analytics, especially for iterative applications. However, the low throughput, high latency network link between the on-premise and off-premise resources (“weak link”) makes maintaining scalability difficult. While several data locality techniques have been designed for big data bursting on hybrid clouds, their effectiveness is difficult to estimate in advance. Yet such estimations are critical, because they help users decide whether the extra pay-as-you-go cost incurred by using the off-premise resources justifies the runtime speed-up. To this end, the current paper presents a performance model and methodology to estimate the runtime of iterative MapReduce applications in a hybrid cloud-bursting scenario. The paper focuses on the overhead incurred by the weak link at fine granularity, for both the map and the reduce phases. This approach enables high estimation accuracy, as demonstrated by extensive experiments at scale using a mix of real-world iterative MapReduce applications from standard big data benchmarking suites that cover a broad spectrum of data patterns. As a result, not only are the produced estimations accurate in absolute terms compared with experimental results, but they are also up to an order of magnitude more accurate than applying state-of-art estimation approaches originally designed for single-site MapReduce deployments.

97 MATHEMATICS AND COMPUTING↗

Biophysical investigation of type A PutAs reveals a conserved core oligomeric structure

Many enzymes form homooligomers, yet the functional significance of self-association is seldom obvious. Herein, we examine the connection between oligomerization and catalytic function for proline utilization A (PutA) enzymes. PutAs are bifunctional enzymes that catalyze both reactions of proline catabolism. Type A PutAs are the smallest members of the family, possessing a minimal domain architecture consisting of N-terminal proline dehydrogenase and C-terminal l-glutamate-γ-semialdehyde dehydrogenase modules. Type A PutAs form domain-swapped dimers, and in one case (Bradyrhizobium japonicum PutA), two of the dimers assemble into a ring-shaped tetramer. Whereas the dimer has a clear role in substrate channeling, the functional significance of the tetramer is unknown. To address this question, we performed structural studies of four-type A PutAs from two clades of the PutA tree. The crystal structure of Bdellovibrio bacteriovorus PutA covalently inactivated by N-propargylglycine revealed a fold and substrate-channeling tunnel similar to other PutAs. Small-angle X-ray scattering (SAXS) and analytical ultracentrifugation indicated that Bdellovibrio PutA is dimeric in solution, in contrast to the prediction from crystal packing of a stable tetrameric assembly. SAXS studies of two other type A PutAs from separate clades also suggested that the dimer predominates in solution. To assess whether the tetramer of B. japonicum PutA is necessary for catalytic function, a hot spot disruption mutant that cleanly produces dimeric protein was generated. The dimeric variant exhibited kinetic parameters similar to the wild-type enzyme. These results implicate the domain-swapped dimer as the core structural and functional unit of type A PutAs.

59 BASIC BIOLOGICAL SCIENCES↗

Rocking response of liquid-filled cylindrical tanks

The hydrodynamic response of liquid-filled storage tanks subjected to translational earthquake shaking has been the focus of studies for more than 75 years. In service, tanks experience six components of seismic input, with rocking due to support flexibility and/or rotational components of ground motion. Published theory for predicting hydrodynamic responses in rigid cylindrical tanks due to rotational seismic input is examined. Analytical solutions for pressure in the fluid and on the tank wall, and base moment are modified to account for the effects of angular displacements at the base. A finite element model of a water-filled cylindrical tank using the Arbitrary Lagrangian and Eulerian (ALE) solver in LS-DYNA is used to demonstrate the efficacy of the proposed expressions for three base rocking motions. Results from the modified analytical solutions and the finite element model are in excellent agreement.

58 GEOSCIENCES↗

Spectral signatures of transverse optical modes in semiconductor nanowires

In order to build nanophotonic devices, it is important to understand and ultimately control the optical mode structure within potential components such as nanoscale waveguides. However, experimental characterization of such modes in the optical regime is difficult due to the nanoscale dimensions of such components and the perturbations that would be induced by a near-field probe. Here, we demonstrate a probe-free, far-field method to characterize the optical modes within GaN nanowires (NWs) based on a novel off-axis scanning confocal microscope system. Using this microscope, we observe spectral signatures resulting from lateral leakage of waveguide modes when they exceed their respective cutoff limits. We identify these modes within hyperspectral images using an analytical model coupled with finite element simulations. The model can also be used to predict the spectral signatures for given geometrical and dielectric parameters, which enabled us to deduce the transverse dimension of the NW from hyperspectral images with an accuracy of ∼ <#comment/> 30 nm .

Wang, Maoji↗