Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOIONIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The effect of autoionization on the HBr + X 2 Π 3/2,1/2 state photoelectron angular distributions

A double-imaging photoelectron-photoion spectrometer and synchrotron radiation have been used to measure the HBr + X 2 Π 3/2 v + = 0, 1, 2 and the 2 Π 1/2 v + = 0 state photoelectron angular distributions, as characterized by the anisotropy parameter β , the total ion yield, and the threshold photoelectron spectrum. Particular attention has been focussed on the photon energy range between the 2 Π 3/2 and the 2 Π 1/2 spin–orbit components of the ground ionic state. This region encompasses Rydberg states, belonging to series converging onto the upper 2 Π 1/2 ionization limit, which may decay by autoionization into the 2 Π 3/2 ionization continuum. A detailed study has been performed on the effects of autoionization on the 2 Π 3/2 v + = 0 state photoelectron angular distributions. Furthermore, the observed energy dependent variations in the β -values exhibit a regular pattern that correlates with excitation into members of a very broad d-type Rydberg series. Additional rapid variations in the β -parameters, which occur over a narrow energy range, appear to coincide with sharp autoionizing Rydberg states belonging to s, p and d series. The present experimental results for the HBr + X 2 Π 3/2 v + = 0 state photoelectron anisotropy parameter are compared to previously reported theoretical predictions and to earlier studies of the Kr + 4p 5 2 P 3/2 state β -parameter. The threshold photoelectron spectrum of the X 2 Π 3/2 v + = 0 band exhibits partially resolved rotational structure. A simulation of this structure yields an ionization threshold of 11.6673 ± 0.0010 eV, which is consistent with previous measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Exploring the negative temperature coefficient behavior of acetaldehyde based on detailed intermediate measurements in a jet-stirred reactor

Acetaldehyde is an observed emission species and a key intermediate produced during the combustion and low-temperature oxidation of fossil and bio-derived fuels. Investigations into the low-temperature oxidation chemistry of acetaldehyde are essential to develop a better core mechanism and to better understand auto-ignition and cool flame phenomena. In this paper, the oxidation of acetaldehyde was studied at low-temperatures (528–946 K) in a jet-stirred reactor (JSR) with the corrected residence time of 2.7 s at 700 Torr. This work describes a detailed set of experimental results that capture the negative temperature coefficient (NTC) behavior in the low-temperature oxidation of acetaldehyde. The mole fractions of 28 species were measured as functions of the temperature by employing a vacuum ultra-violet photoionization molecular-beam mass spectrometer. To explain the observed NTC behavior, an updated mechanism was proposed, which well reproduces the concentration profiles of many observed peroxide intermediates. Finally, the kinetic analysis based on the updated mechanism reveals that the NTC behavior of acetaldehyde oxidation is caused by the competition between the O 2 -addition to and the decomposition of the CH 3 CO radical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A further experimental and modeling study of acetaldehyde combustion kinetics

Acetaldehyde is an important intermediate and a toxic emission in the combustion of fuels, especially for biofuels. To better understand its combustion characteristics, a detailed chemical kinetic model describing the oxidation of acetaldehyde has been developed and comprehensively validated against various types of literature data including laminar flame speeds, oxidation and pyrolysis in shock tubes, chemical structure of premixed flames, and low-temperature oxidation in jet-stirred reactors. To extend the validation range, the chemical structure of a counterflow flame fueled by acetaldehyde at 600 Torr has been measured using vacuum ultra-violet photoionization molecular-beam mass spectrometry. In addition, ignition delay times at 10 atm and 700-1100 K were measured in a rapid compression machine, and a negative temperature coefficient (NTC) behavior was observed. Here, the present kinetic model well reproduces the results of various acetaldehyde combustion experiments covering wide ranges of temperatures (300–2300 K) and pressures (0.02–10 atm), and explains well the observed NTC behavior based on the competition between multiple oxidation pathways for the methyl radicals and their self-recombination forming ethane, a relatively stable species at temperatures below 1000 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ion chemistry in premixed rich methane flames

External electric field and plasma assisted combustion show great potential for combustion enhancement, e.g., emission and ignition control. To understand soot suppression by external electric fields and flame ignition in spark ignition engines, flame ion chemistry needs to be investigated and developed. In this work, comprehensive and systematic investigations of neutral and ion chemistry are conducted in premixed rich methane flames. Cations are measured by quadrupole molecular beam mass spectrometry (MBMS), and neutrals are measured by synchrotron vacuum ultra violet photoionization time of flight MBMS (SVUV-PI-TOF-MBMS). The molecular formula and dominant isomers of various measured cations are identified based on literature survey and quantum chemistry calculations. Experimentally, we found that H 3 O + is the dominant cation in slightly rich flame (Φ = 1.5), but C 3 H 3 + is the most significant in very rich flames (Φ = 1.8 and 2.0). An updated ion chemistry model is proposed and used to explain the effects of changing equivalence ratio. To further verify key ion-neutral reaction pathways, measured neutral profiles are compared with cation profiles experimentally. Furthermore, detailed cation and neutral measurements and numerical simulations by this work help to understand and develop ion chemistry models. Deficiencies in our current understanding of ion chemistry are also highlighted to motivate further research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The C 5 chemistry preceding the formation of polycyclic aromatic hydrocarbons in a premixed 1-pentene flame

We report the formation of small polycyclic aromatic hydrocarbons (PAHs) and their precursors can be strongly affected by reactions of C5 species. For improving existing combustion mechanisms for small PAH formation, it is therefore valuable to understand the fuel-specific chemistry of C5 fuels. To this end, we provide quantitative isomer-resolved species profiles measured in a laminar premixed ( Φ = 1.8) low-pressure (4 kPa) flame of 1-pentene with photoionization molecular-beam mass spectrometry (PI-MBMS) using tunable synchrotron vacuum-ultraviolet (VUV) radiation. These experimental results are accompanied with numerical simulations, starting from models from the literature by Wang et al. [JetSurF version 2.0 (2010)] and Healy et al. [Energy Fuels 24 (2010) 1521–1528] that were developed for different fuels, but which include 1-pentene as an intermediate, and by Narayanaswamy et al. [Combust. Flame 157 (2010) 1879–1898] focusing on the small PAH chemistry. Taking observed discrepancies between experimental results and simulations into consideration, a mechanism for C 5 chemistry was newly developed including PAH formation pathways, and its performance analyzed in detail. Special emphasis was placed on the initial fuel consumption of 1-pentene as well as on formation pathways of small aromatics. The mechanisms show differences regarding fuel decomposition and hydrocarbon growth reactions. These contribute to noticeable differences between the simulations with different models on one hand, and deviations between model predictions and experimental results on the other. While the new model presents overall satisfactory capabilities to predict the mole fraction profiles of common combustion intermediates, the predictive capability of the literature models was not fully satisfying for some intermediate species, including C 4 H 6 , C 7 H 8 , and C 10 H 8 . Lastly, the results indicate that the fuel-specific C 5 reaction routes as well as the mechanism for small PAH formation need further investigation.

1-PenteneAlkene combustion↗
DOE OSTI2020

Influence of ozone addition on the low-temperature oxidation of dimethyl ether in a jet-stirred reactor

The influence of ozone addition on the low-temperature oxidation of dimethyl ether (DME) was investigated experimentally in an atmospheric-pressure jet-stirred reactor, over the temperature range of 400–800 K. Detailed speciation information was obtained by employing synchrotron vacuum ultraviolet photoionization mass spectrometry. Experimental results revealed that the ozone addition had a positive influence on the production of the highly reactive intermediates. Moreover, the low-temperature reactivity of DME was significantly enhanced, which resulted in the broadening of the temperature window of fuel consumption and intermediates formation at lower temperatures. Therefore, novel experimental data of the low temperature regime (400–500 K) could be obtained. The data set of this special temperature regime yielded insights into the DME low-temperature kinetics, which were further supported with modeling analysis based on two existing DME models (Metcalfe et al., 2013; Wang et al., 2015) combined with an ozone sub-mechanism (Zhao et al., 2016). The analysis showed that temperature-sensitive reactions such as the second oxygen channel could be nearly “frozen” at this low temperature (T < 440 K). Furthermore, the production of some intermediates was found to be strongly governed by reaction pairs, such as CH 3 OCH 2 + O 2 = CH 3 OCH 2 O 2 and CH 3 OCH 2 + O 2 = 2 CH 2 O + OH for the CH 2 O formation. This finding could be useful for examining branching ratios in both models, and the analysis suggested the further modification of the branching ratios for the oxygen addition to CH 3 OCH 2 O 2 pathways and the CH 3 OCH 2 O 2 self-reactions were required. Finally, the influences of the O 3 addition in the sensitive reactions of the fuel initial low-temperature oxidation were investigated in this work. It was interesting to note that O 3 addition could change the dominating reactions in the initial low-temperature oxidation, by the addition of some O 3 -related pathways with relatively high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemical insights into the multi-regime low-temperature oxidation of di-n-propyl ether: Jet-stirred reactor experiments and kinetic modeling

To further understand the combustion characteristics and the reaction pathways of acyclic ethers, in this work the oxidation of di-n-propyl ether (DPE) was investigated in a jet-stirred reactor (JSR) combined with a photoionization molecular-beam mass spectrometer. The experiments were carried out at near-atmospheric pressure (700 Torr) and over a temperature range of 425–850 K. Based on the experimental data and previous studies on ether oxidation, a new kinetic model was constructed and used to interpret the oxidation chemistry of DPE. In DPE oxidation, a high reactivity at low temperatures and two negative temperature coefficient (NTC) zones were observed. These behaviors are explained in this work by taking advantage of the obtained species information and the modeling analyses: the two NTC zones are caused by the competition of chain branching and termination reactions of the fuel itself and specific oxidation intermediates, respectively. Furthermore, the general requirements to have double-NTC behavior are discussed. A variety of crucial fuel-specific C 6 species, such as ketohydroperoxides and diones, were detected in the species pool of DPE oxidation. Their formation pathways are illuminated based on rate-of-production (ROP) analyses. Propanal was identified as the most abundant small molecule intermediate, and its related reactions have an important impact on the oxidation process of DPE. Both acetic acid and propionic acid were detected in high concentrations. A new formation pathway of propionic acid is proposed and incorporated into the kinetic model to achieve a more accurate prediction for propionic acid mole fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2

A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.

09 BIOMASS FUELS↗
DOE OSTI2022

A wide range experimental study and further development of a kinetic model describing propane oxidation

This work presents an experimental and kinetic modeling study of propane oxidation. Ignition delay times of propane were measured in a high-pressure shock tube and in rapid compression machines in the temperature range 689 - 1700 K at equivalence ratios of 0.5, 1.0 and 2.0 in 'air', for a wide range of pressures from 20 to 90 bar. CO and H 2 O mole fraction profiles for propane oxidation were measured in a shock tube behind reflected shock waves in the temperature range 1370-1840 K at equivalence ratios of 0.5, 1.0 and 2.0 and at a pressure of approximately 1.3 atm. Moreover, propane oxidation was studied using a jet-stirred reactor coupled to a synchrotron vacuum ultraviolet photoionization mass spectrometer at low temperatures in the range 565 - 690 K and at a pressure of 1 atm. Further, this wide range of experimental datasets for propane oxidation was used to reoptimize and update our previous kinetic mechanisms, AramcoMech3.0 and NUIGMech1.1. In the current mechanism, NUIGMech1.3, the thermo-chemical parameters of all species relevant to low-temperature propane oxidation chemistry, including propyl-peroxyl, hydroperoxyl-propyl, hydroperoxyl-propyl-peroxyl, and carbonyl-hydroperoxide radicals, are updated based on newly calculated values at the CCSD(T)-F12/TZ-F12//B2PLYPD3/TZ///B2PLYP-D3/TZ level of theory. The improvements made in the thermochemical values and in the kinetic parameters for the low-temperature propane oxidation reactions in NUIGMech1.3 result in better model agreement with the new IDTs and speciation data, including carbon monoxide, formaldehyde, propene, acetaldehyde and various minor products such as ethylene, acetic acid, acrolein as well as various hydroperoxide and cyclic ether species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A lumped particle direct simulation Monte-Carlo method combined with the collisional-radiative model for simulations of non-equilibrium laser-induced plasma plumes

Collisional plasma plumes induced by laser irradiation of material targets exhibit large variations in local density as well as ionization and excitation states, making purely hydrodynamic or kinetic simulations inaccurate or infeasible. To address this challenge and capture non-equilibrium effects in laser-induced plasma plumes at arbitrary degrees of ionization, we develop a hybrid computational approach that combines the kinetic direct simulation Monte Carlo (DSMC) method with a collisional-radiative model (CRM). This ℓDSMC-CRM approach utilizes a lumped particle method to represent minor fractions of excited ions in particle-based simulations and a special coarse-graining technique for atomic spectra and photoionization rates, ensuring numerical convergence at reduced computational cost. The hybrid approach is applied to simulate spatially homogeneous relaxation as well as one- and two-dimensional expansions of plasma plumes induced by irradiation of a copper target by a nanosecond laser pulse in a vacuum or background gas. The comparison with an equilibrium model, where local Saha-Boltzmann equilibrium is enforced, shows that the non-equilibrium effects play a dominant role. The equilibrium model can fail to predict the flow structure and strongly underestimate the degree of absorption of laser radiation by the plume. The ℓDSMC-CRM approach is validated against experimental data demonstrating reasonable agreement with the experimental electron density and temperature, while the equilibrium model is found to dramatically underestimate electron density and temperature. The flexibility of the ℓDSMC-CRM approach allows for its seamless integration into existing DSMC frameworks, making it a valuable tool for high-fidelity plasma modeling in laser-material interactions, laser-based manufacturing, and beyond.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Ion imaging studies of the photodissociation dynamics of CH 2 I 2 at 248nm

The photodissociation of CH 2 I 2 at 248 nm is explored using velocity map ion imaging with photoionization detection of the I * ( 2 P 1/2 ) products. The velocity distribution of the I * products reveals that only a small fraction of the available energy is released as translational energy, consistent with a simple impulsive model. Most of the excess energy is channeled into internal excitation with 〈 E int 〉 = 36.3 kcal mol -1 for CH 2 I radical fragments produced with I * atoms. Furthermore, the anisotropy angular distribution of the I * fragments and corresponding positive anisotropy parameter are indicative of prompt dissociation and electronic state mixing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photodissociation dynamics of xylene isomers C 6 H 4 (CH 3 ) 2 at 157nm using an ultracompact velocity map imaging spectrometer – The C 7 H 7 channel

Here, we investigated the photodissociation dynamics of three xylene isomers C 6 H 4 (CH 3 ) 2 at 157nm. The center-of-mass translational energy distributions of C 7 H 7 radicals were found to peak at 26kJmol −1 . Although the ionization energy of the C 7 H 7 tolyl fragment exceeds the energy of a 157nm photon, C 7 H 7 + was observed as a result of the photoionization of vibrationally ‘hot’ tolyl (C 7 H 7 ) radicals and/or two-photon ionization. The formation of rovibrationally excited tolyl fragments was discussed. Our experiments suggest the presence of tolyl radicals in the interstellar medium as a precursor to methylated polycyclic aromatic hydrocarbons upon reaction with vinylacetylene (C 4 H 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-resolution absorption spectroscopy of room-temperature and jet-cooled ammonia between 59,000 and 93,000 cm -1

Here, we present new high-resolution photoabsorption spectra of ammonia spanning the region between 59,000 cm -1 and 93,000 cm -1 that were recorded by using the Fourier Transform Spectrometer at the Synchrotron SOLEIL. This region extends from just above the Franck-Condon envelope for the $\tilde{A}$ 1 $A$ 2 " ← $\tilde{X}$ 1 $A$ 1 ' transition to well above the NH 3 + $\tilde{X}$ + 2 $A$ 2 " ionization threshold. The spectra were recorded at a measured resolution of 0.23 cm -1 in both a room-temperature cell (293 K) and in a slit-jet supersonic expansion (~70 K). The absolute photoabsorption cross section with an uncertainty of ±5% is also reported for the room-temperature spectrum. The present resolution is a factor of 10 – 100 times higher than in other recently reported broad band spectra of ammonia, and many of the observed bands show partially resolved rotational structure. We have attempted to assign this structure for a number of these bands. The oscillator strengths extracted from the data are in good agreement with previous measurements but, in the case of structured bands, the present higher resolution measurements return higher peak absorption cross sections, that increase further when the sample is cooled. The present higher resolution spectra suggest that a number of previous vibronic band assignments that were based on quantum defect considerations may require some revision. Finally, we discuss the substantial differences between the photoabsorption and photoionization data just above the first ionization threshold.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Chlorine atom-initiated low-temperature oxidation of prenol and isoprenol: The effect of C=C double bonds on the peroxy radical chemistry in alcohol oxidation

The chlorine atom-initiated oxidation of two unsaturated primary C5 alcohols, prenol (3-methyl-2-buten-1-ol, (CH 3 ) 2 CCHCH 2 OH) and isoprenol (3-methyl-3-buten-1-ol, CH 2 C(CH 3 )CH 2 CH 2 OH), is studied at 550 K and low pressure (8 Torr). The time- and isomer-resolved formation of products is probed with multiplexed photoionization mass spectrometry (MPIMS) using tunable vacuum ultraviolet ionizing synchrotron radiation. The peroxy radical chemistry of the unsaturated alcohols appears much less rich than that of saturated C4 and C5 alcohols. The main products observed are the corresponding unsaturated aldehydes – prenal (3-methyl-2-butenal) from prenol oxidation and isoprenal (3-methyl-3-butenal) from isoprenol oxidation. No significant products arising from QOOH chemistry are observed. These results can be qualitatively explained by the formation of resonance stabilized allylic radicals via H-abstraction in the Cl + prenol and Cl + isoprenol initiation reactions. The loss of resonance stabilization upon O 2 addition causes the energies of the intermediate wells, saddle points, and products to increase relative to the energy of the initial radicals and O 2 . These energetic shifts make most product channels observed in the peroxy radical chemistry of saturated alcohols inaccessible for these unsaturated alcohols. The experimental findings are underpinned by quantum-chemical calculations for stationary points on the potential energy surfaces for the reactions of the initial radicals with O 2 . Under our conditions, the dominant channels in prenol and isoprenol oxidation are the chain-terminating HO 2 -forming channels arising from radicals, in which the unpaired electron and the –OH group are on the same carbon atom, with stable prenal and isoprenal co-products, respectively. These results suggest that the presence of C=C double bonds in alcohols will reduce low-temperature reactivity during autoignition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Radical–radical reactions, pyrene nucleation, and incipient soot formation in combustion

Here, we present a combined experimental and probabilistic simulation study of soot-precursor. The experiments were conducted using aerosol mass spectrometry coupled with tunable vacuum ultraviolet radiation from the Advanced Light Source at Lawrence Berkeley National Laboratory. Mass spectra and photoionization efficiency (PIE) curves of soot precursor species were measured at different heights in a premixed flat flame and in a counter-flow diffusion flame fueled by ethylene and oxygen. The PIE curves at the pyrene mass from these flames were compared with reference PIE scans recorded for pyrene. The results demonstrate that other C 16 H 10 isomers than pyrene are major components among species condensed onto incipient soot in this study, which is in agreement with the simulations. Species with mass 202 u only have a high prevalence in incipient soot particles drawn from the premixed flame, but hydrocarbon species with sizes in the range 200-400 u are important to incipient-soot formation in both flames. The simulations predict that some species form through combination reactions involving relatively large radicals and bypass traditional molecular-growth pathways through addition of small hydrocarbon species. The experimental results support this prediction; they demonstrate that these species have higher relative abundances in particles formed close to the fuel outlet than smaller, lighter molecular species and indicate that these species are important to early formation of incipient-soot precursors. The results also imply that a leading role in incipient-soot precursor formation is played by species with lower thermal stability than the even-carbon numbered, unsubstituted polycyclic aromatic hydrocarbons known as "stabilomers".

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identification of the molecular-weight growth reaction network in counterflow flames of the C 3 H 4 isomers allene and propyne

The reaction networks responsible for aromatics formation in counterflow flames of the C 3 H 4 isomers allene and propyne are identified through a combined experimental and modeling study. Mole fraction profiles of near-atmospheric pressure (933 mbar) diffusion flames fueled by the C 3 H 4 isomers are analyzed by means of a newly assembled, chemically detailed kinetic mechanism. The experiment consists of a counterflow burner system that is coupled to a high-resolution time-of-flight molecular-beam mass spectrometer with single-photon ionization via synchrotron-generated vacuum-ultraviolet photons. Flame-sampled, mass-specific photoionization efficiency curves are used to identify the presence of aliphatically substituted aromatic species in addition to the commonly considered pericondensed ring structures. The new mechanism describes the formation and growth of aromatics through repetitive sequences of radical–radical and radical–molecule reactions that include C 1 6 intermediates. Higher concentrations of aromatic species are observed in the allene flame and the new mechanism captures the observed experimental trends very accurately. The results indicate the importance of the aliphatically substituted aromatics and of ring-enlargement reactions for the growth reactions. According to the model simulations, radical+radical recombination and PAH-radical+molecule reactions play an important role in PAH growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗