Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Dielectric and pyroelectric anisotropy in melt-quenched BaBi{sub 2}(Nb{sub 1-x}V{sub x}){sub 2}O{sub 9} ceramics

The (0 0 l) textured BaBi{sub 2}(Nb{sub 1-x}V{sub x}){sub 2}O{sub 9} (where x = 0, 0.03, 0.07, 0.1 and 0.13) ceramics were fabricated via the conventional melt-quenching technique followed by high temperature heat-treatment (800-1000 deg. C range). The influence of vanadium content and sintering temperature on the texture development and relative density were investigated. The samples corresponding to the composition x = 0.1 sintered at 1000 deg. C for 10 h exhibited the maximum orientation of about 67%. The Scanning electron microscopic studies revealed the presence of platy grains having the a-b planes perpendicular the pressing axis. The dielectric constant and the pyroelectric co-efficient values in the direction perpendicular to the pressing axis were higher. The anisotropy in the dielectric constant is about 100 (at 100 kHz) at the dielectric maximum temperature and anisotropy in the pyroelectric co-efficient is about 50 {mu}C cm{sup -2} deg. C{sup -1} in the vicinity of pyroelectric anomaly for the sample corresponding to the composition x = 0.1 sintered at 1000 deg. C. Higher values of the dielectric loss and electrical conductivity were observed in the direction perpendicular to the pressing axis which is attributed to the high oxygen ion conduction in the a-b planes.

36 MATERIALS SCIENCE↗

Synthesis, growth, structural, optical, photoconductivity and dielectric studies on potassium p-nitrophenolate dihydrate: A new semiorganic nonlinear optical material

Potassium p-nitrophenolate dihydrate, a potential semiorganic nonlinear optical material, has been synthesized and grown by slow evaporation technique at room temperature. Single crystal X-ray analysis presents an unprecedented bonding between ions in the crystal with acentric structure. In the new structural investigation, p-nitrophenolate instead of producing bond between phenolic O{sup -} and K{sup +}, it seems to put nitro group in bonding with the metal ion. Optical absorption shows excellent transmission in the entire visible and near-infrared region. Room temperature photocurrent, transport properties are carried out in order to enhance the application for second harmonic generation and opto-electronic devices. Dielectric constant is found to be independent at higher frequencies. The crystal possesses prominent positive photoconduction in the presence of photoactive centers formed with trap energy level. The nonlinear optical activity is confirmed by Kurtz powder test.

36 MATERIALS SCIENCE↗

Electric and magnetic properties of Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}-CoFe{sub 2}O{sub 4} particle composite thin film on the SrTiO{sub 3} substrate

We deposited a thin epitaxial Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) layer on the (0 0 1) SrTiO{sub 3} (STO) substrate doped with Nb (0.5 wt.%), then grew composite thin film of CoFe{sub 2}O{sub 4} (CFO) and PZT phases on it. X-ray diffraction and high resolution transmission electron microscopy showed that the PZT and CFO phases in the film had perfect epitaxial structures. CFO nanoparticles were embedded in PZT matrix randomly, which was useful to enhance the insulativity of the composite film. The composite thin film exhibited good ferromagnetic and ferroelectric properties. The dielectric constants of the composite thin film kept unchangeable in a wide bias electric field, but increased in a magnetic field, namely, magnetodielectric effect. The possible reasons for the magnetodielectric effect were discussed.

36 MATERIALS SCIENCE↗

Synthesis of low loss, thermally stable Ce{sub x}Y{sub 1-x}TiTaO{sub 6} microwave ceramics

Ce{sub x}Y{sub 1-x}TiTaO{sub 6} ceramics were prepared through the solid-state ceramic route. The materials were sintered in the range 1520-1580 deg. C. The structure of the system was analyzed by X-ray diffraction and Raman spectroscopic methods. The cell parameters of solid solutions were calculated using the least square method. The microstructure was analyzed using scanning electron microscopy. The dielectric constant ({epsilon}{sub r}), temperature coefficient of resonant frequency ({tau}{sub f}) and the unloaded quality factor (Q{sub u}) are measured in the microwave frequency region using cavity resonator method. The dielectric constant increases with higher concentrations of Ce in the solid solutions. Nearly zero temperature coefficient of resonant frequency ({tau}{sub f}) was obtained for Ce{sub 0.24}Y{sub 0.76}TiTaO{sub 6}. The samples are of high quality factor and are useful electronic materials for microwave applications.

36 MATERIALS SCIENCE↗

Study of the dielectric properties in the NaNbO{sub 3} -KNbO{sub 3}-In{sub 2}O{sub 3} system using AC impedance spectroscopy

We report a comparative study of the dielectric properties of solid-state (ceramic method) synthesized NaNbO{sub 3} (NN), Na{sub 0.75}K{sub 0.25}NbO{sub 3} (K25NN), K{sub 0.5}Na{sub 0.5}NbO{sub 3} (KNN) and some composite materials containing In{sub 2}O{sub 3} and NN or KNN using an AC impedance method. Powder X-ray diffraction (PXRD) was employed to investigate the phase purity. No significant amount of impurity phase was observed for NN, K25NN, and KNN. Substitutions of 10, 15 and 25 mol% In{sup 3+} for Nb{sup 5+} in KNN and NN using solid-state reactions at 1150 deg. C resulted in composite materials. AC impedance studies of NN, KNN and K25NN in the temperature range of 500-800 deg. C showed a single semicircle (attributed to the bulk property) in the high-frequency range of 10{sup 3} to 10{sup 6} Hz. The individual contributions from the bulk and grain boundary on the dielectric properties were resolved and quantified from the impedance data. The calculated dielectric values for NN were consistent with previously reported in the literature. 10% Indium based KNN composite materials had the lowest dielectric loss 0.585 and the dielectric constant of 233 at 100 kHz at the temperature of 650 deg. C.

36 MATERIALS SCIENCE↗

Electrical properties of MgAl{sub 2-2x}Zr{sub x}M{sub x}O{sub 4} (M = Co, Ni and x = 0.00-0.20) synthesized by coprecipitation technique using urea

This paper presents the results of a study concerning the structural and electrical properties of MgAl{sub 2-2x}Zr{sub x}M{sub x}O{sub 4} (x = 0.00-0.20 and M = Co{sup 2+} and Ni{sup 2+}) prepared by a coprecipitation technique using urea as a precipitating agent. The X-ray diffraction data for the pure and its doped samples are consistent with the single-phase spinel and their crystallite sizes are in the range 7-20 {+-} 4 nm. The DC resistivity increases from 3.09 x 10{sup 9} {omega} cm to 6.73 x 10{sup 9} and 8.06 x 10{sup 9} {omega} cm whereas dielectric constant decreases from 5.80 to 5.11 and 4.95 on doping with Zr-Co and Zr-Ni, respectively. The electrical resistivity variations with increase in the dopant contents indicate two types of conduction mechanisms in operation. Several parameters such as, hopping energy (W), metal-semiconductor transition temperature (T{sub MS}) and Debye temperature ({theta}{sub D}) have also been determined. The increase in DC resistivity and decrease in dielectric constant suggest that the synthesized materials can be considered for application as an insulating and structural material in fusion reactors.

36 MATERIALS SCIENCE↗

Dielectric and piezoelectric properties of Y{sub 2}O{sub 3} doped (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} lead-free piezoelectric ceramics

Y{sub 2}O{sub 3} doped lead-free piezoelectric ceramics (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} (0-0.7 wt%) were synthesized by the conventional solid state reaction method, and the effect of Y{sub 2}O{sub 3} addition on the structure and electrical properties was investigated. X-ray diffraction shows that Y{sub 2}O{sub 3} diffuses into the lattice of (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} to form a solid solution with a pure perovskite structure. The temperature dependence of dielectric constant of Y{sub 2}O{sub 3} doped samples under various frequencies indicates obvious relaxor characteristics different from typical relaxor ferroelectric and the mechanism of the relaxor behavior was discussed. The optimum piezoelectric properties of piezoelectric constant d{sub 33} = 137 pC/N and the electromechanical coupling factor k{sub p} = 0.30 are obtained at 0.5% and 0.1% Y{sub 2}O{sub 3} addition, respectively.

36 MATERIALS SCIENCE↗

Dielectric properties of barium strontium titanate thick films prepared by electrophoretic deposition

Ba{sub x}Sr{sub 1-x}TiO{sub 3} (x = 0.5, 0.6, 0.7) thick films were prepared by electrophoretic deposition (EPD) technique on platinum metallic foils using BaTiO{sub 3} and SrTiO{sub 3} nanoparticles with different molar proportion of 1:1, 3:2 and 7:3, respectively. An isostatic pressure method was used to increase density of the thick films before high temperature sintering. Microstructures of the deposited films were examined with XRD and SEM techniques. Porosity of the thick films decreased after the isostatic pressure process. The Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thick films of 10 {mu}m, 15 {mu}m and 20 {mu}m showed a tunability of 28.8%, 33.3% and 33.9%, respectively, at room temperature and at a biasing field of 2 kV/mm. The dielectric constant was from 2138 to 3446 and dielectric loss was from 0.016 to 0.011 at zero bias field at 10 kHz. The temperature dependence of dielectric constant was also measured and the effect of porosity and thickness on the electrical performance of the thick films was discussed.

36 MATERIALS SCIENCE↗

Crystal structure and characterization of a novel organic crystal: 4-Dimethylaminobenzophenone

Single crystals of a novel organic material, dimethylaminobenzophenone were grown from aqueous solution employing the technique of controlled evaporation. Dimethylaminobenzophenone belongs to the monoclinic system, with a = 12.5755(7) A, b = 7.9749(4) A, c = 13.0946(7) A, {alpha} = 90{sup o}, {beta} = 111.6380(10){sup o} and {gamma} = 90{sup o}. Fourier transform infrared study has been performed to identify the functional groups. The transmittance of dimethylaminobenzophenone has been used to calculate the refractive index n; the extinction coefficient K and both the real {epsilon}{sub r} and imaginary {epsilon}{sub i} components of the dielectric constant as functions of photon energy. The optical band gap of dimethylaminobenzophenone is 2.9 eV. The structural prefection of the grown crystals has been analyzed by high-resolution X-ray diffraction rocking curve measurements. Thermo gravimetric analysis and differential thermal analysis have also been carried out, and the thermal behavior of dimethylaminobenzophenone crystal has been studied. The dielectric properties and mechanical properties have been investigated.

36 MATERIALS SCIENCE↗

An investigation of structural, magnetic and dielectric properties of R{sub 2}NiMnO{sub 6} (R = rare earth, Y)

We have investigated the structure, magnetic and dielectric properties of the double perovskite oxides, R{sub 2}NiMnO{sub 6} (R = Pr, Nd, Sm, Gd, Tb, Dy, Ho and Y). We could refine powder X-ray diffraction patterns of all the phases on the basis of monoclinic (P2{sub 1}/n) double perovskite structure where Ni and Mn atoms are ordered at 2c and 2d sites, respectively. All the phases are ferromagnetic insulators exhibiting relatively low dielectric loss and dielectric constants in the range 15-25. The ferromagnetic ordering temperature of the R{sub 2}NiMnO{sub 6} series seems to correlate better with the radius of R{sup 3+} atoms than with the average Ni-O-Mn angle ({phi}) in the double perovskite structure. These results are consistent with all samples having Mn{sup 4+} and Ni{sup 2+} with minimal antisite disorder.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and dielectric properties of Ba(Ti{sub 1-x}Sn{sub x})O{sub 3} nanopowders and ceramics

We prepared Ba(Ti{sub 1-x}Sn{sub x})O{sub 3} powders and ceramics by means of the sol-gel process, with dibutyltin dilaurate as the Sn precursor. The samples were characterized by means of Fourier-transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and scanning electron microscopy, and also determined the dielectric properties of the ceramics. The powders synthesized by means of the sol-gel process had a grain size on the nanometer scale, with the grains mainly composed of a cubic BaTiO{sub 3} phase. Sn can disperse into BaTiO{sub 3} more uniformly in the sol-gel technique using dibutyltin dilaurate as the Sn precursor. With increasing Sn concentration, the grain size of the Ba(Ti{sub 1-x}Sn{sub x})O{sub 3} ceramics increased and the maximum dielectric constant ({epsilon}{sub max}) first increased and then decreased. At a Sn concentration of 5 mol%, {epsilon}{sub max} reached its maximum value (19,235).

36 MATERIALS SCIENCE↗

Dielectric relaxation in complex perovskite oxide In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3}

The dielectric study of indium nickel zirconate, In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3} (INZ) synthesized by solid state reaction technique is performed in a frequency range from 500 Hz to 1 MHz and in a temperature range from 303 to 493 K. The X-ray diffraction analysis shows that the compound is monoclinic. A relaxation is observed in the entire temperature range as a gradual decrease in {epsilon}'({omega}) and as a broad peak in {epsilon}''({omega}) in the frequency dependent real and imaginary parts of dielectric constant, respectively. The frequency dependent electrical data are analyzed in the framework of conductivity and electric modulus formalisms. The frequencies corresponding to the maxima of the imaginary electric modulus at various temperatures are found to obey an Arrhenius law with activation energy of 0.66 eV. The Cole-Cole model is used to study the dielectric relaxation of INZ. The scaling behaviour of imaginary part of electric modulus suggests that the relaxation describes the same mechanism at various temperatures. The frequency dependent conductivity spectra follow the universal power law.

36 MATERIALS SCIENCE↗

Preparation and microwave characterization of BaNd{sub 2-x}Sm{sub x}Ti{sub 4}O{sub 12} (0 {<=} x {<=} 2) ceramics and their effect on the temperature coefficient of dielectric constant in polytetrafluoroethylene composites

High dielectric and temperature-stable ceramic compositions have been prepared through solid-state ceramic route. The structure and microstructure of the ceramics have been studied using powder X-ray diffraction and scanning electron microscopic techniques. The dielectric properties of well-sintered ceramics are studied in the microwave frequency region using Hakki and Coleman post-resonator technique. The samples exhibited high dielectric constant (>77), relatively high quality factor (>1500) and near zero temperature coefficient of resonant frequency. Phase pure calcined ceramic materials are incorporated in the polytetrafluoroethylene matrix through a proprietary process comprising of sigma mixing, extrusion, calendering followed by hot pressing for the fabrication of planar circuit laminates. The effect of temperature coefficient of dielectric constant of the resultant polytetrafluoroethylene/ceramic composite materials is studied with respect to compositional variation of the filler materials.

36 MATERIALS SCIENCE↗

Sol-gel derived PZT films doped with vanadium pentoxide

The present research investigated the sol-gel preparation, dielectric and ferroelectric properties of PZT films doped with 5 mol% vanadium oxide. Stable PZTV sols can be readily formed, and homogeneous, micrometer thick and pinhole-free PZTV films were obtained by using spin coating followed with rapid annealing. The X-ray diffraction patterns revealed that no parasitic or secondary phases were formed in the sol-gel PZT films with the addition of vanadium oxide. The material doped with vanadium pentoxide showed enhanced dielectric constant and remanent polarization with reduced loss tangent and coercive field.

36 MATERIALS SCIENCE↗

Extraordinary role of Ce-Ni elements on the electrical and magnetic properties of Sr-Ba M-type hexaferrites

The structural, electrical and magnetic behavior of Sr{sub 0.5}Ba{sub 0.5-x}Ce{sub x}Fe{sub 12-y}Ni{sub y}O{sub 19} (where x = 0.00-0.10; y = 0.00-1.00) hexaferrite nanomaterials are reported in this paper. The structural analysis indicates that the Ce-Ni doped Sr-Ba M-type hexaferrite samples synthesized by the co-precipitation method are stoichiometric, single magnetoplumbite phase with crystallite sizes in the range of 35-48 nm. The dc-electrical resistivity of the pure Sr-Ba hexaferrite is enhanced to almost 10{sup 2} times by doping with Ce-Ni contents of x = 0.06; y = 0.60. The dielectric constant and dielectric loss tangent decrease to values {approx}14 and <0.2, respectively, by increasing the frequency up to 1 MHz. Small relaxation peaks at frequencies >10{sup 5} Hz are observed for the samples with Ce content of x > 0.06. The values of saturation magnetization increase from 66.32 to 84.33 emu/g and remanance magnetization from 42.64 to 56.01 emu/g but coercivity decreases from 2.85 to 1.59 kOe by substitution of Ce-Ni. Sharp ferri-paramagnetic transition is observed in the samples, which is confirmed by DSC results. Ce-Ni substitution acts to reduce the electron-hopping between Fe{sup 2+}/Fe{sup 3+} ions and also improves the magnetic properties. These characteristics are desirable for their possible use in microwave and chip devices.

36 MATERIALS SCIENCE↗

Composition dependent phase connectivity, dielectric and magnetoelectric properties of magnetoelectric composites with Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} as piezoelectric phase

Ferrite (Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4}) phase, ferroelectric (Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3}) phase and magnetoelectric composites of (x)Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} + (1 - x)Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} with x = 0.15, 0.30 and 0.45 were prepared using solid-state reaction technique. Presence of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} and Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} was confirmed using X-ray diffraction technique. The scanning electron microscopic images were used to study the microstructure of the composites. Connectivity scheme present in the magnetoelectric (ME) composites are discussed from the microscopic images. Variation of dielectric constant and dielectric loss with temperature for all the composites was studied. Here we report the effect of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} mole fraction on connectivity schemes between Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} and Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} composite. The variation of magnetoelectric voltage coefficient with dc magnetic field shows peak behaviour. The maximum value of magnetoelectric voltage coefficient of 9.47 mV/cm Oe was obtained for 0.15Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} + 0.85Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} composites. Finally we have co-related the effect of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} content and dielectric properties on magnetoelectric voltage coefficient.

36 MATERIALS SCIENCE↗

Low-temperature sintering of temperature-stable LaNbO{sub 4} microwave dielectric ceramics

We demonstrate the correlation between sintering behavior and microstructural observations in low-temperature sintered, LaNbO{sub 4} microwave ceramics. Small CuO additions to LaNbO{sub 4} significantly lowered the sintering temperature from 1250 to 950 {sup o}C. To elucidate the sintering mechanism, the internal microstructure of the sample manipulated by a focused ion beam (FIB) was investigated using transmission electron microscopy (TEM) and energy-dispersive spectroscopy (EDS). LaNbO{sub 4} with 3 wt% CuO sintered at 950 {sup o}C for 2 h possessed the following excellent microwave dielectric properties: a quality factor (Qxf) of 49,000 GHz, relative dielectric constant ({epsilon}{sub r}) of 19.5, and temperature coefficient of resonant frequency ({tau}{sub f}) of 1 ppm/{sup o}C. The ferroelastic phase transformation was also investigated using in situ X-ray diffraction (XRD) to explain the variation of {tau}{sub f} in low-temperature sintered LaNbO{sub 4} as a function of CuO content.

36 MATERIALS SCIENCE↗

Tuning the dielectric properties of thiourea analog crystals for efficient nonlinear optical applications

Materials with low dielectric constant have attracted a great deal of interest in the field of nonlinear applications and microelectronic industry. Metal complexes of thiourea with group II transition metals (Zn, Cd) as central atom and period III elements (S, Cl) were synthesized by chemical reaction method and single crystals were grown from aqueous solution by slow evaporation method. By parallel plate capacitor technique, the dielectric response, dissipation factor, ac conductivity and impedance of virgin and metal complexes have been studied in the frequency (100 Hz to 5 MHz) and temperature (303-423 K) ranges. Metal complexes of thiourea with cadmium substitute have a low dielectric constant less than 10. Also the presence of chlorine in the metal complex induces noncentro symmetric structure. Hence the role of group II transition metals and period III elements in tuning the dielectric properties for efficient nonlinear applications has been studied.

36 MATERIALS SCIENCE↗