SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Oxophilicity Drives Oxygen Transfer at a Palladium–Silver Interface for Increased CO Oxidation Activity

A single-layer AgO x phase grown on Ag(111) efficiently transfers oxygen to Pd domains at room temperature, rendering the Pd-decorated surface highly reactive toward CO oxidation. Here, oxygen transfer from AgO x to Pd and the surface reactivity toward CO were investigated as a function of the Pd coverage using X-ray photoelectron spectroscopy, surface infrared spectroscopy of adsorbed CO, temperature-programmed reaction spectroscopy, and density functional theory (DFT) calculations. Our results show that all of the oxygen from the AgO x layer (~0.375 monolayer) migrates to the surface of Pd during formation of a nearly complete Pd bilayer at 300 K and that the oxygen coverages generated on Pd increase as the Pd cluster size decreases, reaching values that exceed the oxygen concentration in the AgO x layer by as much as a factor of 2. Experimental measurements and DFT calculations show that preferential binding of oxygen on the edges of the Pd clusters enhances the oxygen coverage on Pd clusters of decreasing size and produces a heterogeneous spatial distribution of oxygen. CO adsorbs in high coverages at 100 K by binding on both the terraces and O-rich edges of the Pd clusters. During subsequent heating, oxidation of the adsorbed CO consumes nearly all of the oxygen that transferred from AgO x to the Pd domains; in contrast, the pure AgO x layer exhibits limited reactivity toward CO adsorbed at 100 K. These results demonstrate that differences in oxophilicity drive facile oxygen transfer from Ag to the edges of Pd nanoclusters and thereby give rise to an efficient pathway for CO oxidation on bimetallic PdAg surfaces. The cooperation between the Pd and Ag domains results in near-interfacial chemistry that may be broadly important in catalysis by bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Enhanced Activity in Layered Metal-Oxide-Based Oxygen Evolution Catalysts by Layer-by-Layer Modulation of Metal-Ion Identity

Few-layered potassium nickel and cobalt oxides show drastic differences in catalytic activity based on metal ion preorganization. Uniform compositions [(CoO 2 /K) 6 or (NiO 2 /K) 6 ] show limited activity, while homogeneously mixed-metal cobalt/nickel oxides [(Co n Ni (1–n) O 2 /K) 6 ] display moderate improvement. However, a layer-by-layer arrangement of alternating cobalt and nickel oxide sheets [e.g., (CoO 2 /K/NiO 2 /K)] provides superior catalytic performance, reducing the oxygen evolution overpotential by ∼200–400 mV. Density functional theory simulations provide an illustration of the electronic properties (density of states and localization of orbitals) that promote catalysis in the layer-segregated materials over those of homogeneous composition. This study reveals that atomic preorganization of metal ions within layered catalysts plays a more crucial role than the overall metal composition in enhancing catalytic efficiency for oxygen evolution.

catalysts↗

DOE OSTI2025

Electrochemical Behavior of Cerium at an Indium Tin-Doped Oxide Electrode in Acidic Media

The redox behavior and speciation of cerium at mesoporous thin films composed of nanoparticles of indium tin-doped oxide (nITO) electrodes were characterized in pH 4.8, 0.1 M acetate buffer and both 0.1 and 1 M HNO 3 using electrochemical techniques and X-ray photoelectron spectroscopy. Anodic deposition of ceria species from Ce(III) to the nITO electrode was achieved under all solvent conditions via spontaneous condensation of electrochemically generated ceric hydroxide species. In 1 M nitric acid, the rate of CeO 2 dissolution is on the same order as CeO 2 deposition, resulting in negligible amounts of CeO 2 electrodeposited at the nITO surface. The cathodic stripping of CeO 2 from the nITO substrate deposited in 0.1 M nitric acid or pH 4.8 acetate buffer follows a 2-step process where Ce(IV)-oxide is initially reduced to an unstable Ce(III)-oxide species that rapidly undergoes acid catalyzed dissolution to yield soluble Ce(III) (aq) . These findings provide a foundation for the pH and anodic potential controlled deposition of CeO 2 thin films to ITO substrates, which can aid in the development of materials composed of ceria. As a result, they can also be used to infer likely analogous actinide redox behavior and speciation at these electrodes.

Cerium↗

DOE OSTI2026

Incorporation of Ion Transport Chains into Multivariate MOF for Improved Water Oxidation

The climate crisis demands clean energy technologies to cut CO 2 emissions from fossil fuels. Hydrogen fuel cells and solar-driven CO 2 reduction are promising, but both rely on efficient water oxidation. Polypyridyl ruthenium complexes are active catalysts for water oxidation; however, they exhibit poor stability and recyclability. Our group improved performance by embedding these complexes into metal−organic frameworks (MOFs). As water oxidation is pH-dependent, proton management further enhances reactivity. To address the issue, we introduced proton transfer pathways into the MOF structure. Specifically, we incorporated −SO 3 H groups onto the biphenyl linkers of UiO-67 loaded with [Ru(tpy)(dcbpy)OH 2 ]PF 6 catalyst (where tpy = 2,2′:6′,2″-terpyridine; dcbpy = 5,5-dicarboxy-2,2′- bipyridine). The sulfonated MOF exhibited a 2.5-fold increase in oxygen evolution compared to the nonsulfonated analogue. After 1 h of electrolysis, the sulfonated MOF exhibited a turnover number of 25 for oxygen evolution reaction compared to 10 for the native MOF, demonstrating the benefits of built-in proton management.

Catalysts↗

DOE OSTI2021

Factors Governing Oxygen Vacancy Formation in Oxide Perovskites

The control of oxygen vacancy (V O ) formation is critical to advancing multiple metal-oxide-perovskite-based technologies. In this work, we report the construction of a compact linear model for the neutral V O formation energy in ABO 3 perovskites that reproduces, with reasonable fidelity, Hubbard-U-corrected density functional theory calculations based on the state-of-the-art, strongly constrained and appropriately normed exchange-correlation functional. We obtain a mean absolute error of 0.45 eV for perovskites stable at 298 K, an accuracy that holds across a large, electronically diverse set of ABO 3 perovskites. Our model considers perovskites containing alkaline-earth metals (Ca, Sr, and Ba) and lanthanides (La and Ce) on the A-site and 3d transition metals (Ti, V, Cr, Mn, Fe, Co, and Ni) on the B-site in six different crystal systems (cubic, tetragonal, orthorhombic, hexagonal, rhombohedral, and monoclinic) common to perovskites. Physically intuitive metrics easily extracted from existing experimental thermochemical data or via inexpensive quantum mechanical calculations, including crystal bond dissociation energies and (solid phase) reduction potentials, are key components of the model. Beyond validation of the model against known experimental trends in materials used in solid oxide fuel cells, the model yields new candidate perovskites not contained in our training data set, such as (Bi,Y)(Fe,Co)O 3 , which we predict may have favorable thermochemical water-splitting properties. The confluence of sufficient accuracy, efficiency, and interpretability afforded by our model not only facilitates high-throughput computational screening for any application that requires the precise control of V O concentrations but also provides a clear picture of the dominant physics governing V O formation in metal-oxide perovskites.

08 HYDROGEN↗

DOE OSTI2024

Metal–Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting catalytic activity and selectivity. In re-cent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal–organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogene-ous, catalytically-active metal site while offering additional, attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate ste-reoelectronic control of Mo active sites in a systematic manner. A Zr 6 -based MOF, NU-1000, was employed along with its sulfated analog Zr 6 -based NU-1000-SO 4 to anchor a dioxymolybdenum species, which enabled examination of sup-port-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Furthermore, characterization techniques including single crystal X-ray diffraction, were concomi-tantly used with reaction kinetic profiles to better comprehend the dynamics of different Mo active sites, thus correlat-ing structural change with activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Beyond Thermal Limits: Manipulating Reactive Intermediate Coverages and Turnover Rates via Visible Photon-Mediated Catalysis on Rh-Doped Perovskite Oxides

Catalyst behavior depends on surface adsorbate energetics that are constrained by scaling relationships on metal surfaces. External stimuli (e.g., photons), however, can disrupt these limitations by modulating key intermediate coverages via non-thermal reaction pathways. Here, low-energy visible photon fluxes are utilized to selectively control coverages of strongly bound intermediates on isolated Rh active sites doped within a semiconductor perovskite oxide host (SrTiO 3 ). Red light (632 nm) facilitates selective photolytic CO desorption from rhodium gem-dicarbonyl (Rh(CO) 2 ) species that are ubiquitous reaction intermediates, including for the probe reaction studied herein CO oxidation to CO 2 . Thermochemical CO 2 formation rates (408 K) on Rh-doped SrTiO 3 are limited by adsorbed CO, exhibiting a negative apparent CO rate order (−0.6) and a positive O 2 rate order (+0.4). Arrhenius analyses, anaerobic CO oxidation measurements, and in situ spectroscopies assert that, thermochemically, lattice oxygens from the doped perovskite contribute to CO 2 formation rates. Notably, under red light illumination (0.76–2.02 W cm –2 ), the apparent CO rate order shifts to positive (+1). This, combined with decreasing apparent activation energies and CO coverages (wavelength-agnostic) with increasing photon flux, indicates that photons act selectively toward driving Rh(CO) 2 photolysis, even within complex reaction networks, thereby enhancing Rh accessibility, O 2 dissociation, and consequent rates. Finally, low-energy red light enables more stoichiometric feeds, leading to 650% higher CO 2 rates than those achieved thermally. Overall, this work elucidates how low-energy light can be leveraged, not just to improve reaction rates, but to selectively affect rates of individual elementary steps and key intermediate coverages, thereby breaking conventional scaling relationships that limit thermal catalyst performance.

catalysts↗

DOE OSTI2022

Zinc Oxide–Graphene Nanocomposite-Based Sensor for the Electrochemical Determination of Cetirizine

A nanocomposite electrode of graphene (Gr) and zinc oxide (ZnO) nanoparticles was fabricated to study the electrochemical oxidation behavior of an anti-inflammatory drug, i.e., cetirizine (CET). The voltametric response of CET for bare CPE, Gr/CPE, ZnO/CPE, and the ZnO-Gr nanocomposite electrode was studied. The modifier materials were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray powder diffraction (XRD) to comprehend the surface morphology of the utilized modifiers. The influence of pH, scan rate, and accumulation time on the electrooxidation of CET was examined. It was found that the electrochemical oxidation of CET was diffusion-controlled, in which two protons and two electrons participated. The detection limit was found to be 2.8 × 10 -8 M in a linearity range of 0.05–4.0 µM. Study of excipients was also performed, and it was found that they had negligible interference with the peak potential of CET. The validation and utility of the fabricated nanocomposite sensor material were examined by analyzing clinical and biological samples. Stability testing of the nanocomposite electrode was conducted to assess the reproducibility, determining that the developed biosensor has good stability and high efficiency in producing reproducible results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Platinum on High-Entropy Aluminate Spinels as Thermally Stable CO Oxidation Catalysts

Thermal degradation is a leading cause of automotive catalyst deactivation. Because high-entropy oxides are uniquely stabilized at high temperatures via an increase in configurational entropy, these materials may offer new mechanisms for preventing the thermal deactivation of precious metal catalysts. In this work, we evaluated platinum loaded on simple and high-entropy aluminate spinels (MAl 2 O 4 , where M = Co, Cu, Mg, Ni, or mixtures thereof) in carbon monoxide oxidation before and after aging at 800 °C. Pt supported on all simple spinels showed significant deactivation after thermal aging compared to the fresh samples, with T 90 increasing by at least 60 °C. However, Pt on high-entropy spinels had nearly the same or better activity after aging, with T 90 increasing by only 6 °C at most. During aging and reduction, copper exsolved from the spinel supports and alloyed with platinum. This interaction promoted low temperature oxidation activity, presumably through weakened CO binding, but did not prevent deactivation. On the other hand, Co, Mg, and Ni constituents promoted stronger CO bonding, as evidenced by apparent negative order kinetics and poor activity at low temperatures. High-entropy spinels, containing a variety of active metals, displayed synergetic reactant adsorption capacity and cooperative effects with supported platinum particles, which collectively prevented thermal deactivation.

CO oxidation↗

DOE OSTI2023

Nutrient Recovery from Algae Residues Using Mild Oxidative Treatment

Algal biorefining to fuels and chemicals frequently requires both fuel production and nutrient recycle pathways. Mild Oxidative Treatment (MOT) is a promising wet oxidation route that simultaneously converts nitrogen and carbon in algae hydrolysate and extracted residues into ammonia and carboxylic acids (up to C5), respectively. The latter can be converted to sustainable aviation fuel by ketonization, condensation, and hydrodeoxygenation. We show that for a Scenedesmus algae under certain oxidation conditions, the nitrogen in the residues can be converted quantitatively to ammonia and recovered by cation exchange, while almost half of the carbon can be converted to carboxylic acids, mainly acetic acid. At the same time, we also show that soluble phosphorus in the form of phosphate can be selectively recovered by anion exchange, leaving a clean aqueous carboxylic acid stream for upgrading to fuels.

algae↗

DOE OSTI2023

Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed a performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on stream, two days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeO x and having increased reducibility on the MgO support. Furthermore, the results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way to improved efficiencies of cerium utilization in oxidation catalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2022

2D Oxides Realized via Confinement Heteroepitaxy

Novel confinement techniques facilitate the formation of non-layered 2D materials. Here it is demonstrated that the formation and properties of 2D oxides (GaO x , InO x , SnO x ) at the epitaxial graphene (EG)/silicon carbide (SiC) interface is dependent on the EG buffer layer properties prior to element intercalation. Using 2D Ga, it is demonstrated that defects in the EG buffer layer lead to Ga transforming to GaO x with non-periodic oxygen in a crystalline Ga matrix via air oxidation at room temperature. However, crystalline monolayer GaO 2 and bilayer Ga 2 O 3 with ferroelectric wurtzite structure(FE-WZ') can then be formed via subsequent high-temperature O 2 annealing. Furthermore, the graphene/X/SiC (X = 2D Ga or Ga 2 O 3 ) junction is tunable from Ohmic to a Schottky or tunnel barrier depending on the interface species. Finally, using vertical transport measurements and electron energy loss spectroscopy analysis, the bandgap of 2D gallium oxide is identified as 6.6 ± 0.6 eV, significantly larger than that of bulk β-Ga 2 O 3 (≈4.8 eV), suggesting strong quantum confinement effects at the 2D limit. Furthermore, the study presented here is foundational for development of atomic-scale, vertical 2D/3D heterostructure for applications requiring short transit times, such as GHz and THz devices.

2D gallium oxides↗

DOE OSTI2020

Asymmetric Lattice Disorder Induced at Oxide Interfaces

Control of order-disorder phase transitions is a fundamental materials science challenge, underpinning the development of energy storage technologies such as solid oxide fuel cells and batteries, ultra-high temperature ceramics, and durable nuclear waste forms. At present, the development of promising complex oxides for these applications is hindered by a poor understanding of how interfaces affect lattice disordering processes and defect transport. Here we explore the evolution of local disorder in ion-irradiated La 2 Ti 2 O 7 /SrTiO 3 thin film heterostructures using a combination of high-resolution scanning transmission electron microscopy (STEM), position-averaged convergent beam electron diffraction (PACBED), electron energy loss spectroscopy (STEM-EELS), and ab initio theory calculations. We observe highly non-uniform lattice disordering driven by asymmetric oxygen vacancy formation across the interface. Our calculations indicate that this asymmetry results from differences in the polyhedral connectivity and vacancy formation energies of the two interface components, suggesting ways to manipulate lattice disorder in functional oxide heterostructures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2022

The Role of Oxygen Transfer in Oxide Heterostructures on Functional Properties

A variety of mechanisms are reported to play critical roles in contributing to the high carrier/electron mobility in oxide/SrTiO 3 (STO) heterostructures. By using La 0.95 Sr 0.05 TiO 3 (LSTO) epitaxially grown on different single crystal substrates (such as STO, GdScO 3 , LaAlO 3 , (LaAlO 3 ) 0.3 (Sr 2 AlTaO 6 ) 0.7 , and CeO 2 buffered STO) as the model systems, the formation of a conducting substrate surface layer (CSSL) on STO substrate is shown at relatively low growth temperature and high oxygen pressure (725 °C, 5 × 10 –4 Torr), which contributes to the enhanced conductivity of the LSTO/STO heterostructures. Different from the conventional oxygen vacancy model, this work reveals that the formation of the CSSL occurs when growing an oxide layer (LSTO in this case) on STO, while neither annealing nor the growth of an Au layer alone at the exact same growth condition generates the CSSL in STO. It demonstrates that the oxide layer actively pulls oxygen from STO substrate at given growth conditions, leading to the formation of the CSSL. Here, the observations emphasize the oxygen transfer across film/substrate interface during the synthesis of oxide heterostructures playing a critical role in functional properties.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Visualizing the Nanoscale Oxygen and Cation Transport Mechanisms during the Early Stages of Oxidation of Fe–Cr–Ni Alloy Using In Situ Atom Probe Tomography

Abstract Understanding the early stages of interactions between oxygen and material surfaces—especially at very high spatial resolutions—is highly beneficial for fields ranging from materials degradation, corrosion, geological sciences, forensics, and catalysis. The ability of in situ atom probe tomography (APT) is demonstrated to track the diffusion of oxygen and metal ions at nanoscale spatial resolution during the early stages of oxidation of a model Fe–Cr–Ni alloy. Using 18 O isotope tracers in these in situ APT experiments and complementary ex situ multimodal microscopy, spectroscopy, and computational simulations allows to precisely analyze the kinetics of oxidation and determine that outward cation diffusion to oxide/air interface is the primary mechanism for intragranular oxide growth in this alloy at 300 °C. This unique in situ isotopic tracer APT approach and the insights gained can be highly beneficial for studying early stages of gas–surface reactions in a broad array of materials.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Chemical Profiles of the Oxides on Tantalum in State of the Art Superconducting Circuits

Abstract Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. It is recently shown that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, the chemical profile of the surface of tantalum films grown on c‐plane sapphire using variable energy X‐ray photoelectron spectroscopy (VEXPS) is studied. The different oxidation states of tantalum that are present in the native oxide resulting from exposure to air are identified, and their distribution through the depth of the film is measured. Furthermore, it is shown how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. Correlating these measurements with detailed measurements of quantum devices may elucidate the underlying microscopic sources of loss.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Formation of Organic Acids and Carbonyl Compounds in $\textit{n}$-Butane Oxidation via γ-Ketohydroperoxide Decomposition

A crucial chain-branching step in autoignition is the decomposition of ketohydroperoxides (KHP) to form an oxy radical and OH. Other pathways compete with chain-branching, such as “Korcek” dissociation of γ-KHP to a carbonyl and an acid. Here we characterize the formation of a γ-KHP and its decomposition to formic acid+acetone products from observations of $\textit{n}$-butane oxidation in two complementary experiments. In jet-stirred reactor measurements, KHP is observed above 590 K. The KHP concentration decreases with increasing temperature, whereas formic acid and acetone products increase. Observation of characteristic isotopologs acetone-$d_3$ and formic acid-$d_0$ in the oxidation of CH 3 CD 2 CD 2 CH 3 is consistent with a Korcek mechanism. In laser-initiated oxidation experiments of $\textit{n}$-butane, formic acid and acetone are produced on the timescale of KHP removal. Further, modelling the time-resolved production of formic acid provides an estimated upper limit of 2 s –1 for the rate coefficient of KHP decomposition to formic acid+acetone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Controlling Exsolution Dynamics in High‐Entropy Oxides for Highly Active and Selective Acetylene Semi‐Hydrogenation

Exsolution-derived catalysts feature robust metal–support interactions that enhance catalytic performance; yet achieving precise control over exsolution dynamics in multicomponent oxides remains challenging. In this study, we demonstrate that exsolution behavior in high-entropy oxides (HEOs) can be rationally tuned through coupled lattice- and valence-engineering to create a highly active and selective catalyst for acetylene semi-hydrogenation. Incorporation of Li + into a rock salt-structured HEO (LiNiMgCuZnCoO x and LiHEO) induces local lattice distortion, generates oxygen vacancies, and partially oxidizes Co sites from Co 2+ to Co 3+ , collectively modulating local charge redistribution. This strategy enables facilitated Cu nanoparticle exsolution and alters the exsolution sequence from Cu 0 > Ni 0 > Co 0 in pristine HEO to Cu 0 > Co 0 > Ni 0 in the LiHEO. The resulting catalyst via controlled exsolution exhibits superior activity and ethylene selectivity, outperforming state-of-the-art transition metal systems. This work establishes entropy-enabled lattice and valence engineering as a facile route to programmable exsolution for enhanced catalysis.

36 MATERIALS SCIENCE↗