Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Effect of preparation procedure and nanostructuring on the thermoelectric properties of the lead telluride-based material system AgPb{sub m}BiTe{sub 2+m} (BLST-m)

We report on the preparation and thermoelectric properties of the quaternary system AgPb{sub m}BiTe{sub 2+m} (Bismuth-Lead-Silver-Tellurium, BLST-m) that were nanostructured by mechanical alloying. Nanopowders of various compositions were compacted by three different methods: cold pressing/annealing, hot pressing, and short term sintering. The products are compared with respect to microstructure and sample density. The thermoelectric properties were measured: thermal conductivity in the temperature range from 300 K to 800 K and electrical conductivity and Seebeck coefficient between 100 K and 800 K. The compacting method and the composition had a substantial impact on carrier concentration and mobility as well as on the thermoelectric parameters. Room temperature Hall measurements yielded carrier concentrations in the order of 10{sup 19 }cm{sup −3}, slightly increasing with increasing content of the additive silver bismuth telluride to the lead telluride base. ZT values close to the ones of bulk samples were achieved. X-ray diffraction and transmission electron microscopy (TEM) showed macroscopically homogeneous distributions of the constituting elements inside the nanopowders ensembles, indicating a solid solution. However, high resolution transmission electron microscopy (HRTEM) revealed disorder on the nanoscale inside individual nanopowders grains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large scale ZnTe nanostructures on polymer micro patterns via capillary force photolithography

A novel approach to prepare micro patterns ZnTe nanostructures on Si (100) substrate using thermal evaporation is proposed by capillary Force Lithography (CFL) technique on a self-assembled sacrificial Polystyrene mask. Polystyrene thin films on Si substrates are used to fabricate surface micro-relief patterns. ZnTe nanoparticles have been deposited by thermal evaporation method. The deposited ZnTe nanoparticles properties were assessed by Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM). SEM studies indicated that the particles are uniform in size and shape, well dispersed and spherical in shape. This study reports the micro-arrays of ZnTe nanoparticles on a self-assembled sacrificial PS mask using a capillary flow photolithography process which showed excellent, morphological properties which can be used in photovoltaic devices for anti-reflection applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave synthesis of nanostructured oxide sorbents doped with lanthanides

A number of nanostructured mesoporous oxide systems based on aluminum oxide, doped with lanthanide ions have been obtained in this study. Structure and morphology of oxides obtained have been examined by X-ray diffraction analysis, thermogravimetric analysis, scanning electron microscopy. The surface area of the samples was determined by the BET method. The dependence of the adsorption of insulin on synthesized oxides from the concentration was investigated. The containing of insulin in solutions after adsorption was determined by the Bradford method. The isotherms of adsorption of insulin on resulting oxide sorbents were plotted, the dependence capacity of the sorption of insulin from the lanthanide dopant was determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-limiting and complete oxidation of silicon nanostructures produced by laser ablation in water

Oxidized Silicon nanomaterials produced by 1064 nm pulsed laser ablation in deionized water are investigated. High-resolution transmission electron microscopy coupled with energy dispersive X-ray spectroscopy allows to characterize the structural and chemical properties at a sub-nanometric scale. This analysis clarifies that laser ablation induces both self-limiting and complete oxidation processes which produce polycrystalline Si surrounded by a layer of SiO{sub 2} and amorphous fully oxidized SiO{sub 2}, respectively. These nanostructures exhibit a composite luminescence spectrum which is investigated by time-resolved spectroscopy with a tunable laser excitation. The origin of the observed luminescence bands agrees with the two structural typologies: Si nanocrystals emit a μs-decaying red band; defects of SiO{sub 2} give rise to a ns-decaying UV band and two overlapping blue bands with lifetime in the ns and ms timescale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of increased nanostructure cone growth on Cr due to grazing-incidence Ta seed atom deposition in a He plasma

Nanostructure cone growth on chromium during helium plasma exposure in the PISCES-A linear plasma device is found to increase with the deposition of heavy tantalum atoms. Tantalum is found to be especially effective at increasing cone growth if the tantalum is incident on the surface at a grazing angle (~5° or less). Tantalum atoms at grazing incidence are observed to be dominantly deposited at the cone tips, consistent with reduced sputtering of the cone tips and increased cone growth. Monte-Carlo simulations are found to be qualitatively consistent with the experimental observation that grazing-incidence heavy atom deposition on a lighter substrate will tend to increase cone growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancing hyperspectral EELS analysis of complex plasmonic nanostructures with pan-sharpening

Nanoscale hyperspectral techniques—such as electron energy loss spectroscopy (EELS)—are critical to understand the optical response in plasmonic nanostructures, but as systems become increasingly complex, the required sampling density and acquisition times become prohibitive for instrumental and specimen stability. As a result, there has been a recent push for new experimental methodologies that can provide comprehensive information about a complex system, while significantly reducing the duration of the experiment. In this work, we present a pan-sharpening approach to hyperspectral EELS analysis, where we acquire two datasets from the same region (one with high spatial resolution and one with high spectral fidelity) and combine them to achieve a single dataset with the beneficial properties of both. This work outlines a straightforward, reproducible pathway to reduced experiment times and higher signal-to-noise ratios, while retaining the relevant physical parameters of the plasmonic response, and is generally applicable to a wide range of spectroscopy modalities.

36 MATERIALS SCIENCE↗

Effect of unmodulated laser light on the nanostructure of a thin solid AD-1 azo dye film

Exposure to light uniform in intensity and polarisation causes marked changes in the surface topography of a thin (320 nm) nanostructured AD-1 low molecular weight azo dye film. Linearly polarised incoherent light with a wavelength of 470 nm and intensity of 1 mW cm{sup -2} produces numerous teardrop-shaped hillocks of the order of 200 nm in radius over most of the film surface. (letters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoinduced translational molecular mobility in solid nanostructured azo dye films

A new mechanism controlling the molecular motion in thin azo-containing films during a photoinduced change in the surface nanorelief is found. It is shown experimentally that exposure of a solid AD-1 azo dye, deposited on a glass substrate, to incoherent linearly polarised light leads to formation of nanostructures with a characteristic size of 200 nm, which are similar to droplets of melt of this dye on the same substrate. It is shown that photoinduced mass transport in a solid AD-1 azo dye film can be explained by the mobility of molecules related to their trans-cis-photoisomerisation, which leads to film softening with subsequent formation of spherical protrusions under surface tension forces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, spectral-luminescent, and lasing properties of nanostructured Tm : CaF{sub 2} ceramics

The structure and the spectral-luminescent properties of CaF{sub 2} - TmF{sub 3} fluoride ceramics and single crystals are studied. AFM investigations revealed a layered nanostructure of grains, which was not observed in reference samples of single crystals. It is found that the spectral-luminescent properties of CaF{sub 2} - TmF{sub 3} ceramics and single crystals are similar. Lasing at the {sup 3}F{sub 4} {yields} {sup 3}H{sub 6} transition of Tm{sup 3+} ions in CaF{sub 2} - TmF{sub 3} ceramics (wavelength 1898 nm) under diode pimping is obtained for the first time. (laser applications and other topics in quantum electronics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Colour centres and nanostructures on the surface of laser crystals

This paper presents a study of structural and radiationinduced colour centres in the bulk and ordered nanostructures on the surface of doped laser crystals: sapphire, yttrium aluminium garnet and strontium titanate. The influence of thermal annealing, ionising radiation and plasma exposure on the spectroscopic properties of high-purity materials and crystals containing Ti, V and Cr impurities is examined. Colour centres resulting from changes in the electronic state of impurities and plasma-induced surface modification of the crystals are studied by optical, EPR and X-ray spectroscopies, scanning electron microscopy and atomic force microscopy. X-ray line valence shift measurements are used to assess changes in the electronic state of some impurity and host ions in the bulk and on the surface of oxide crystals. Conditions are examined for the formation of one- and two-level arrays of ordered crystallites 10{sup -10} to 10{sup -7} m in size on the surface of crystals doped with irongroup and lanthanoid ions. The spectroscopic properties of the crystals are analysed using ab initio self-consistent field calculations for Me{sup n+} : [O{sup 2-}]{sub k} clusters. (interaction of laser radiation with matter. laser plasma)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical limiting effects in nanostructured silicon carbide thin films

We present the results of experiments on the interaction of nanosecond laser radiation at 532 and 1064 nm with nanostructured silicon carbide thin films of different polytypes. We have found the effect of optical intensity limiting at both wavelengths. The intensity of optical limiting at λ = 532 nm (I{sub cl} ∼ 10{sup 6} W cm{sup -2}) is shown to be an order of magnitude less than that at λ = 1064 nm (I{sub cl} ∼ 10{sup 7} W cm{sup -2}). We discuss the nature of the nonlinearity, leading to the optical limiting effect. We have proposed a method for determining the amount of linear and two-photon absorption in material media. (nonlinear optical phenomena)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface nanostructuring by bichromatic femtosecond laser pulses through a colloidal particle array

This paper considers the surface nanostructuring of polymers and glasses by femtosecond laser pulses using an array of colloidal particles as a focusing system. We demonstrate that partial conversion of the femtosecond laser pulse energy into the second harmonic considerably reduces the surface modification threshold and the size of the resulting structural elements. At intensities above 10{sup 12} W cm{sup -2}, surface modification (ablation and swelling) occurs through free carrier generation. In this process, the second harmonic is more efficient in multiphoton ionisation, whereas the fundamental is more efficient in impact ionisation. The second harmonic is better focused by colloidal particle arrays than is the fundamental. As a result, the use of bichromatic pulses ensures a decrease in both the surface modification threshold and the size of the resulting structural elements. We discuss the optical properties of colloidal particle arrays and the ways of producing such arrays on dielectric substrates. (extreme light fields and their applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ablation and nanostructuring of metals by femtosecond laser pulses

Using an interferometric continuous monitoring technique, we have investigated the motion of the surface of an aluminium target in the case of femtosecond laser ablation at picosecond time delays relative to the instant of laser exposure. Measurements of the temporal target dispersion dynamics, molecular dynamics simulation results and the morphology of the ablation crater have demonstrated a thermomechanical (spall) nature of the disruption of the condensed phase due to the cavitation-driven formation and growth of vapour phase nuclei upon melt expansion, followed by the formation of surface nanostructures upon melt solidification. The tensile strength of heated aluminium in a condensed state has been determined experimentally at an expansion rate of ∼10{sup 9} s{sup -1}. (extreme light fields and their applications)

36 MATERIALS SCIENCE↗

Formation of nanostructures under femtosecond laser ablation of metals

We present the results of studying the morphology of the modified surface of aluminium, nickel and tantalum after ablation of the surface layer by a femtosecond laser pulse. The sizes of characteristic elements of a cellular nanostructure are found to correlate with thermo-physical properties of the material and the intensity of laser radiation. (superstrong light fields)

36 MATERIALS SCIENCE↗

Quantitative phase retrieval and characterization of magnetic nanostructures via Lorentz (scanning) transmission electron microscopy

Magnetic materials phase reconstruction using Lorentz transmission electron microscopy (LTEM) measurements have traditionally been achieved using longstanding methods such as off-axis holography (OAH) fast-Fourier transform technique and the transport-of-intensity equation (TIE). The increase in access to processing power alongside the development of advanced algorithms have allowed for phase retrieval of nanoscale magnetic materials with greater efficacy and resolution. Specifically, reverse-mode automatic differentiation (RMAD) and the extended electron ptychography iterative engine (ePIE) are two recent developments of phase retrieval that can be applied to analyzing micro-to-nano- scale magnetic materials. This work evaluates phase retrieval using TIE, RMAD, and ePIE in simulations of Permalloy (Ni 80 Fe 20 ) nanoscale islands, or nanomagnets. Extending beyond simulations, we demonstrate total phase retrieval and image reconstructions of a NiFe nanowire using OAH and RMAD in LTEM and ePIE in Lorentz-mode-4D scanning transmission electron microscopy experiments and determine the saturation magnetization through corroborations with micromagnetic modeling. Finally, we demonstrate the efficacy of these methods in retrieving the total phase and highlight its use in characterizing and analyzing the proximity effect of the magnetic nanostructures.

Lorentz transmission electron microscopy↗

Scattering approach to Casimir forces and radiative heat transfer for nanostructured surfaces out of thermal equilibrium

We develop an exact method for computing Casimir forces and the power of radiative heat transfer between two arbitrary nanostructured surfaces out of thermal equilibrium. The method is based on a generalization of the scattering approach recently used in investigations on the Casimir effect. Analogously to the equilibrium case, we find that also out of thermal equilibrium the shape and composition of the surfaces enter only through their scattering matrices. The expressions derived provide exact results in terms of the scattering matrices of the intervening surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasicontinuous x-ray laser with {lambda}=10.8 nm in Pd-like tungsten using a nanostructured target

A new-generation x-ray laser project is explained. It is based on the transitions in Pd-like ions in nanoplasmas. The gain coefficient is calculated for the 4d{sub 3/2}{sup 9}5d{sub 3/2}[J=0]-4d{sub 3/2}{sup 9}5p{sub 1/2}[J=1] transition ({lambda}{approx_equal}10.8 nm) in Pd-like tungsten. It is suggested that a cylindrical target made of nanostructured tungsten is pumped in the longitudinal direction by a laser pulse with energy 1-2 keV and duration {approx}500 ps. For this pump pulse the target density and dimensions are calculated, as well as the temporal variations of the optimal plasma parameters for attaining gL {approx} 14. The energy yield in the 10.8-nm line is more than 10{sup 20} eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Theory of plasmon-enhanced high-order harmonic generation in the vicinity of metal nanostructures in noble gases

We present a semiclassical model for plasmon-enhanced high-order harmonic generation (HHG) in the vicinity of metal nanostructures. We show that, besides the field enhancement, both the inhomogeneity of the enhanced local fields and electron absorption by the metal surface play an important role in the HHG process and lead to the generation of even harmonics and a significantly increased cutoff. For the examples of silver-coated nanocones and bowtie antennas, we predict that the required intensity reduces by up to three orders of magnitude due to plasmonic field enhancement. The study of the enhanced high-order harmonic generation is connected with a finite-element simulation of the electric field enhancement due to the excitation of the plasmonic modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗