Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NAVIGATION AND GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Loran-C performance assurance assessment program

The Federal Aviation Administration (FAA) has accepted the Loran-C navigation system as a supplemental navigation aid for enroute use. Extension of Loran-C utilization to instrument approaches requires establishment of a process by which the current level of performance of the system is always known by the pilot. This system 'integrity' translates into confidence that, if the system is made available to the pilot, the guidance will be correct. Early in the consideration of Loran-C for instrument approaches, the Loran-C Planning Work-Group (LPW) was formed with membership from the FAA, the US Coast Guard, various state governments, aviation users, equipment manufacturers and technical experts. The group was hosted and co-chaired by the National Association of State Aviation Officials (NASAO). This forum was ideal for identification of system integrity issues and for finding the correct process for their resolution. Additionally, the Wild Goose Association (WGA), which is the international Loran-C technical and user forum, regularly brings together members of the FAA, Coast Guard, and the scientific community. Papers and discussions from WGA meetings have been helpful. Given here is a collection of the issues in which Ohio University became involved. Issues definition and resolution are included along with the recommendations in those areas where resolution is not yet complete.

Lilley, Robert W.↗
NASA NTRS1983

Technology research for digital flight control

The use of advanced digital systems for flight control and guidance for a specific mission is investigated. The research areas include advanced electronic system architectures, tests with the global positioning system (GPS) in a helicopter, and advanced integrated systems concept for rotorcraft. Emphasis is on a search and rescue mission, differential global positioning systems to provide a data base of performance information for navigation, and a study to determine the present usage and trends of microcomputers and microcomputer components in the avionics industries.

Carestia, R. A.↗
NASA NTRS2008

NASA Tech Briefs, December 2008

Topics covered include: Crew Activity Analyzer; Distributing Data to Hand-Held Devices in a Wireless Network; Reducing Surface Clutter in Cloud Profiling Radar Data; MODIS Atmospheric Data Handler; Multibeam Altimeter Navigation Update Using Faceted Shape Model; Spaceborne Hybrid-FPGA System for Processing FTIR Data; FPGA Coprocessor for Accelerated Classification of Images; SiC JFET Transistor Circuit Model for Extreme Temperature Range; TDR Using Autocorrelation and Varying-Duration Pulses; Update on Development of SiC Multi-Chip Power Modules; Radio Ranging System for Guidance of Approaching Spacecraft; Electromagnetically Clean Solar Arrays; Improved Short-Circuit Protection for Power Cells in Series; Electromagnetically Clean Solar Arrays; Logic Gates Made of N-Channel JFETs and Epitaxial Resistors; Improved Short-Circuit Protection for Power Cells in Series; Communication Limits Due to Photon-Detector Jitter; System for Removing Pollutants from Incinerator Exhaust; Sealing and External Sterilization of a Sample Container; Converting EOS Data from HDF-EOS to netCDF; HDF-EOS 2 and HDF-EOS 5 Compatibility Library; HDF-EOS Web Server; HDF-EOS 5 Validator; XML DTD and Schemas for HDF-EOS; Converting from XML to HDF-EOS; Simulating Attitudes and Trajectories of Multiple Spacecraft; Specialized Color Function for Display of Signed Data; Delivering Alert Messages to Members of a Work Force; Delivering Images for Mars Rover Science Planning; Oxide Fiber Cathode Materials for Rechargeable Lithium Cells; Electrocatalytic Reduction of Carbon Dioxide to Methane; Heterogeneous Superconducting Low-Noise Sensing Coils; Progress toward Making Epoxy/Carbon-Nanotube Composites; Predicting Properties of Unidirectional-Nanofiber Composites; Deployable Crew Quarters; Nonventing, Regenerable, Lightweight Heat Absorber; Miniature High-Force, Long-Stroke SMA Linear Actuators; "Bootstrap" Configuration for Multistage Pulse-Tube Coolers; Reducing Liquid Loss during Ullage Venting in Microgravity; Ka-Band Transponder for Deep-Space Radio Science; Replication of Space-Shuttle Computers in FPGAs and ASICs; Demisable Reaction-Wheel Assembly; Spatial and Temporal Low-Dimensional Models for Fluid Flow; Advanced Land Imager Assessment System; Range Imaging without Moving Parts.

Source record↗
NASA NTRSDate not supplied

Building Capacity for Policy-makers in a Virtual Setting: Providing Tools to Analyze Wildfire Smoke Plumes and Their Impacts

The NASA DEVELOP Program conducted 10-week long feasibility projects in a remote work setting, including partnering with The Nature Conservancy’s Washington Chapter and the Puget Sound Clean Air Agency to investigate wildfire smoke from 2000 - 2020 in the Pacific Northwest using satellite-derived data. The team engaged with platforms for collaboration both internally with NASA affiliates and externally with community organizations. Working from multiple states, the team members used a variety of software including Google Meet, Microsoft Teams, and Google Earth Engine to foster communication and work with data in a shared virtual environment. Throughout the project, the team learned that executing the project in a distanced work setting made it easier to reach out to scientists across the country for expertise and guidance. To study changes in air quality resulting from wildfire smoke, the team utilized data from NASA’s Fire Information from Resource Management System (FIRMS) and the ESA’s Sentinel-5 TROPOspheric Monitoring Instrument (TROPOMI). The team created a Google Earth Engine web-based tool, “Plume Hazards and Observations of Emissions by Navigating an Interactive eXplorer” (PHOENIX), to visualize changes in pollutants and aerosol optical depth after fire events. The potential relationship between plume height and fire radiative power was evaluated by using NASA’s Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Aqua and Terra satellites and NASA’s Multi-angle Imaging SpectroRadiometer (MISR) aboard Terra with the MISR INteractive eXplorer (MINX). The PHOENIX smoke assessment tool and science communication infographics will be shared electronically with the partner organizations. Furthermore, the team introduced the partners to MINX and will provide a tailored tutorial that included a recorded video and a written component with a live virtual workshop. These resources build capacity for further research and education on wildfire smoke and air quality within communities.

NASA DEVELOP↗
NASA NTRS1973

A low-cost inertial smoothing system for landing approach guidance

Accurate position and velocity information with low noise content for instrument approaches and landings is required for both control and display applications. In a current VTOL automatic instrument approach and landing research program, radar-derived landing guidance position reference signals, which are noisy, have been mixed with acceleration information derived from low-cost onboard sensors to provide high-quality position and velocity information. An in-flight comparison of signal quality and accuracy has shown good agreement between the low-cost inertial smoothing system and an aided inertial navigation system. Furthermore, the low-cost inertial smoothing system has been proven to be satisfactory in control and display system applications for both automatic and pilot-in-the-loop instrument approaches and landings.

Niessen, F. R.↗
NASA NTRS1986

Computer vision for robots; Proceedings of the Meeting, Cannes, France, December 2-6, 1985

The conference presents papers on segmentation techniques, three-dimensional recognition and representation, processing image sequences, and navigation and mobility. Particular attention is given to determining the pose of an object, adaptive least squares correlation with geometrical constraints, and the reliable formation of feature vectors for two-dimensional shape representation. Other topics include the real-time tracking of a target moving on a natural textured background, computer vision for the guidance of roving robots, and integrating sensory data for object recognition tasks.

Faugeras, O. D.↗
NASA NTRS2013

Class D Management Implementation Approach of the First Orbital Mission of the Earth Venture Series

A key element of the National Research Council's Earth Science and Applications Decadal Survey called for the creation of the Venture Class line of low-cost research and application missions within NASA (National Aeronautics and Space Administration). One key component of the architecture chosen by NASA within the Earth Venture line is a series of self-contained stand-alone spaceflight science missions called "EV-Mission". The first mission chosen for this competitively selected, cost and schedule capped, Principal Investigator-led opportunity is the CYclone Global Navigation Satellite System (CYGNSS). As specified in the defining Announcement of Opportunity, the Principal Investigator is held responsible for successfully achieving the science objectives of the selected mission and the management approach that he/she chooses to obtain those results has a significant amount of freedom as long as it meets the intent of key NASA guidance like NPR 7120.5 and 7123. CYGNSS is classified under NPR 7120.5E guidance as a Category 3 (low priority, low cost) mission and carries a Class D risk classification (low priority, high risk) per NPR 8705.4. As defined in the NPR guidance, Class D risk classification allows for a relatively broad range of implementation strategies. The management approach that will be utilized on CYGNSS is a streamlined implementation that starts with a higher risk tolerance posture at NASA and that philosophy flows all the way down to the individual part level.

Wells, James E.↗
NASA NTRSDate not supplied

Autonomous Burn Targeting for a Lunar Sortie Staged From a Near-Rectilinear Halo Orbit

NASA is planning manned lunar landings starting in the mid 2020s as part of its Artemis program. These lunar sortie missions will be staged from a Near-Rectilinear Halo Orbit (NRHO), with a requirement for the lander to autonomously determine the timing and targets for multiple burns so that it can navigate its way back to the staging vehicle in the NRHO. The lander mission profile transitions through multiple gravitational regimes, at times influenced equally by 3rd bodies (Earth and Sun) as much as by the Moon, while at other times the lander is primarily influenced by lunar gravitation. These different gravitational regimes pose challenges to guidance and targeting logic. The present work describes options for autonomous logic for each of several major maneuvers of the lunar sortie, including numerical techniques to incorporate the effect of 3rd bodies. Throughout the development there is an emphasis on simplicity and computational efficiency.

NRHO↗
DOE OSTI2013

Assessment of Vessel Requirements for the U.S. Offshore Wind Sector

Douglas-Westwood was commissioned by the US Department of Energy (DOE) to investigate the anticipated demand for various vessel types associated with offshore wind development in the United States through 2030, as well as to assess related market barriers and mitigating policy options. This Report contains our findings. It is intended to provide guidance on all vessel-related aspects of offshore wind installation to a wide range of audiences, including federal and state-level government agencies, research institutions, prospective project developers, installation companies, vessel operators and shipbuilders, as well as the general public. To develop scenarios of potential vessel demand, Douglas-Westwood, in conjunction with Navigant Consulting and the National Renewable Energy Laboratory (NREL) and in cooperation with the Department of Energy (DOE), established detailed rollout scenarios for four US offshore wind regions, respectively Atlantic Coast, Great Lakes, Gulf Coast and Pacific Coast. Rollout scenarios were based on DOE-provided offshore wind capacity targets by region in three sets of variations, reflecting several possible rates of wind farm installation and differing levels of technology advancement prior to 2030. The highest growth scenario reflects the potential for 54 GW of capacity installed by 2030 in alignment with the National Offshore Wind Strategy issued in 2011 by DOE and the Department of the Interior. The resulting scenarios used throughout this Report are referred to as the High Growth – High Technology (HH) scenario, the Medium Growth – High Technology (MH) scenario, and the Low Growth – Low Technology (LL) scenario. These scenarios inform our views of the vessel requirements in the US offshore wind sector through 2030. Each scenario falls into two phases: Phase 1 covers 2013 to 2020, while Phase 2 covers 2021 to 2030. The rollout scenarios are discussed in detail in Chapter 7 of this Report.

17 WIND ENERGY↗
NASA NTRS1982

Fault tolerant navigation in a Microwave Landing System environment

This paper describes the failure detection and isolation performance of a sensor fault tolerant system for the NASA Terminal Configured Vehicle (TCV) research aircraft in a Microwave Landing System (MLS) environment. The objective of the fault tolerant system is to detect failures in navigation-aid instruments and on-board sensors and to provide reliable estimates for the aircraft states in the possible presence of these sensor malfunctions. Analytic redundancy, which exists between the various sensor outputs due to the aircraft point mass equations of motion, is used to identify sensor failures. State estimates are used by an automatic guidance and control system to land the aircraft along a prescribed path.

Caglayan, A. K.↗
NASA NTRS1995

Guidance and control requirements for high-speed Rollout and Turnoff (ROTO)

This report defines the initial requirements for designing a research high-speed rollout and turnoff (ROTO) guidance and control system applicable to transport class aircraft whose purpose is to reduce the average runway occupancy time (ROT) for aircraft operations. The requirements will be used to develop a ROTO system for both automatic and manual piloted operation under normal and reduced visibility conditions. Requirements were determined for nose wheel/rudder steering, braking/reverse thrust, and the navigation system with the aid of a non-real time, three degree-of-freedom MD-11 simulation program incorporating airframe and gear dynamics. The requirements were developed for speeds up to 70 knots using 30 ft exit geometries under dry and wet surface conditions. The requirements were generated under the assumptions that the aircraft landing system meets the current Category III touchdown dispersion requirements and that aircraft interarrival spacing is 2 nautical miles. This effort determined that auto-asymmetric braking is needed to assist steering for aft center-of-gravity aircraft. This report shows various time-history plots of the aircraft performance for the ROTO operation. This effort also investigated the state-of-the-art in the measurement of the runway coefficient of friction for various runway conditions.

Goldthorpe, Steve H.↗
NASA NTRS2019

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: ACAS Xu HITL Overview

This presentation provides an overview of a recently completed human-in-the-loop simulation, conducted as part of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. This study examined how to present resolution advisories (RAs) issued by Airborne Collision Avoidance System (ACAS) Xu, which can be in the vertical dimension, the horizontal dimension, or both (i.e., "blended"). The study varied the location of the ACAS Xu traffic information - it was either presented within an 'integrated' display or a 'standalone' display, where the traffic information was separated from the vehicle control interfaces and navigational information. The presentation covers the test set-up, scenario design, and facilities utilized in this experiment. The primary dependent variables are listed, but no detailed results are included in this outbrief since data analysis is still underway. Goal: assess ACAS Xu Run 5 in a HITL setting to measure pilot & system performance – RWC alerting and guidance – RA alerting and guidance • Horizontal-only, vertical-only, and blended RAs • Strengthening RAs, reversals and added/removed RAs during blended maneuvers – Incorporate realistic sensor noise into the simulation environment – Compare pilot and DAA system performance back to NASA’s Phase 1 DAA MOPS V&V HITL • We leveraged the findings of an engineering analysis conducted in March to help inform how to implement the Xu logic – Part 1 focused on how to display horizontal-only, vertical-only and blended RAs – Part 2 focused on how to display automated RA responses Xu Engineering Analysis Results Part 1 objectives: – Characterize pilot responses to (canned) ACAS Xu RAs in a variety of display configurations • With vs. Without text accompaniment • Simple vs. ‘Advanced’ aural alerting • Results – Pilots struggled to meet 5 seconds initial response requirement • Particularly against horizontal and blended RAs – Pilots failed to respond more quickly to secondary RAs • Expected response time to subsequent RAs = 2.5 seconds No clear effect of the different alerting conditions on response times – Response times primarily driven by RA type • Pilots demonstrated high level of compliance with RAs and self-reported Xu alerting and guidance as being acceptable – 1/5 reported text as being necessary – 4/5 wanted the aural alert to retain the original RA sequence (i.e., issue a follow-on RA second rather than first) – 4/5 wanted to retain the “Maintain Heading/Vertical Speed” aural alert in the event that the pilot reached their target response at the time of secondary RA Based on these results, we decided on the following for the HITL experimental design: – Incorporated an ‘auto-fill’ feature in Vigilant Spirit that removes the need for pilots to manually enter a heading or altitude for RAs • Pilots only have to click ‘Send’ to upload the RA target heading/altitude – Did not include an RA ‘text box’ • The auto-fill feature largely replaces the purpose of the text box – Using a combination of the ‘Basic’ and ‘Advanced’ aural alerting • In case of blended maneuvers will issue “Maintain Heading/Vertical Rate” if pilot has reached 1st RA target at the time the 2nd RA is issued • Integration and testing with Xu Run 5 also resulted in us adding display logic to modify how horizontal RAs are presented – Target heading was shown to update at approx. 1 Hz making it difficult for pilots to implement – Display logic limited horizontal RA strengthening to once every 5 seconds • Did not impact timing of reversals, new RAs (i.e., blended), or CoC Engineering Analysis Results

human systems integration↗
NASA NTRS1974

Description and flight performance of two systems for two-segment approach

This paper describes two different avionic systems which were designed and developed to provide guidance and control for two-segment noise abatement approaches. The concept of a low-cost retrofit avionic system evolved into a special-purpose two-segment computer which required a DME collocated with the ILS glide-slope transmitter. This system was evaluated in a Boeing 727-200 aircraft. The second system is an area navigation (RNAV) system modified to include the two-segment approach. This system is more sophisticated than the first system and does not restrict usage to any specific navigation ground aid. The modified RNAV system is a Collins ANS-70A and is currently being evaluated in a DC-8-61 aircraft.

Wehrend, W. R.↗
NASA NTRS2011

Energy Navigation: Simulation Evaluation and Benefit Analysis

This paper presents results from two simulation studies investigating the use of advanced flight-deck-based energy navigation (ENAV) and conventional transport-category vertical navigation (VNAV) for conducting a descent through a busy terminal area, using Continuous Descent Arrival (CDA) procedures. This research was part of the Low Noise Flight Procedures (LNFP) element within the Quiet Aircraft Technology (QAT) Project, and the subsequent Airspace Super Density Operations (ASDO) research focus area of the Airspace Project. A piloted simulation study addressed development of flight guidance, and supporting pilot and Air Traffic Control (ATC) procedures for high density terminal operations. The procedures and charts were designed to be easy to understand, and to make it easy for the crew to make changes via the Flight Management Computer Control-Display Unit (FMC-CDU) to accommodate changes from ATC.

Williams, David H.↗
NASA NTRS1972

The case for long range chemoreceptive piloting in Chelonia

The reproductive ecology and migration habits of Chelonia are investigated. Efforts were made to determine if the turtle navigates by chemoreception and if sensory responses of the migrating animals could be electronically tracked through telemetry. Efforts were also made to: (1) explain why certain small islands or restricted areas of mainland shore are chosen by Chelonia as nesting grounds, even when located a thousand miles or more from the year round feeding grounds of the population; (2) identify guidance mechanisms used by migrants in their periodic open ocean travels; and (3) account for the so called lost year - the virtually complete disappearance of young sea turtles during their first year of life. It was suggested that turtle migration is aided by an olfactory mechanism, sun compass, and ocean currents. The tracking experiment was unsuccessful; the equipment was lost or damaged and stopped functioning after about two hours.

Carr, A. F., Jr.↗
NASA NTRSDate not supplied

U.S. Spacesuit Knowledge Capture – Creation, Curation, and Dissemination

The U.S. spacesuit is a special system that has intrigued and fascinated the world since Neil Armstrong set foot on the Moon in 1969. With over 50 years since that momentous achievement, NASA is planning to land the first woman and next man on the Moon in the near future. This goal begets the need to build a new spacesuit, a spacesuit created from the legacy knowledge of the Extravehicular Mobility Unit (EMU), combined with knowledge gained from technology development over the decades. As NASA transitions to its new horizon, the U.S. Spacesuit Knowledge Capture (SKC) Program is poised to help. The SKC Program’s primary function has been to capture, curate, and disseminate spacesuit-related knowledge among scientists, engineers, and technicians. The SKC Program was created in 2007 to capture knowledge primarily from spacesuit subject-matter experts (SMEs) who were retiring from NASA. These SMEs had 30 to 50 years of spacesuit knowledge. Over the years, the SKC Program has evolved and expanded its scope with a current focus on complementing the buildup of the Exploration EMU (xEMU) at the Johnson Space Center. As part of this focus, the SKC Program recently teamed with the xEMU Community of Practice (CoP) for knowledge sharing. The xEMU CoP provides a forum where early career engineers, professionals new to human spaceflight, and the xEMU community can come together regularly to seek guidance, share knowledge, meet their peers, discover resources, and ask questions. The CoP created an environment where the knowledge can be easily and routinely captured and recorded. The recorded events are archived and curated in an SKC Program library and disseminated as appropriate. This paper details the roles that the SKC Program and CoP play in the xEMU buildup, along with the navigation of the creation, curation, and dissemination processes.

Cinda Chullen↗
NASA NTRS1986

Design requirements and development of an airborne descent path definition algorithm for time navigation

The design requirements for a 4D path definition algorithm are described. These requirements were developed for the NASA ATOPS as an extension of the Local Flow Management/Profile Descent algorithm. They specify the processing flow, functional and data architectures, and system input requirements, and recommended the addition of a broad path revision (reinitialization) function capability. The document also summarizes algorithm design enhancements and the implementation status of the algorithm on an in-house PDP-11/70 computer. Finally, the requirements for the pilot-computer interfaces, the lateral path processor, and guidance and steering function are described.

Izumi, K. H.↗
NASA NTRS1992

Differential GPS/inertial navigation approach/landing flight test results

Results of a joint Honeywell/NASA-Langley differential GPS/inertial flight test conducted in November 1990 are discussed focusing on postflight data analysis. The test was aimed at acquiring a system performance database and demonstrating automatic landing based on an integrated differential GPS/INS with barometric and radar altimeters. Particular attention is given to characteristics of DGPS/inertial error and the magnitude of the differential corrections and vertical channel performance with and without altimeter augmentation. It is shown that DGPS/inertial integrated with a radar altimeter is capable of providing a precision approach and autoland guidance of manned return space vehicles within the Space Shuttle accuracy requirements.

Snyder, Scott↗