Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Models, Structural”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Topological studies of hSVCT1, the human sodium-dependent vitamin C transporter and the influence of N-glycosylation on its intracellular targeting

The Na{sup +}-dependent transporters, hSVCT1 and hSVCT2, were assessed in COS-1 cells for their membrane topology. Antibodies to N- and C-termini of hSVCT1 and C-terminus of hSVCT2 identified positive immunofluorescence only after permeabilisation, suggesting these regions are intracellular. PNGase F treatment confirmed that WT hSVCT1 ({approx} 70-100 kDa) is glycosylated and site-directed mutagenesis of the three putative N-glycosylation sites, Asn138, Asn144, Asn230, demonstrated that mutants N138Q and N144Q were glycosylated ({approx} 68-90 kDa) with only 31-65% of WT L-ascorbic acid (AA) uptake while the glycosylation profile of N230Q remained unaltered ({approx} 98% of WT activity). However, the N138Q/N144Q double mutant displayed barely detectable membrane expression at {approx} 65 kDa, no apparent glycosylation and minimal AA uptake (< 10%) with no discernible improvement in expression or activity when cultured at 28 {sup o}C or 37 {sup o}C. Marker protein immunocytochemistry with N138Q/N144Q identified intracellular aggregates with hSVCT1 localised at the nuclear membrane but absent at the plasma membrane thus implicating its role as a possible intracellular transporter and suggesting N-glycosylation is required for hSVCT1 membrane targeting. Also, Lys242 on the same putative hydrophilic loop as Asn230 after biotinylation was inaccessible from the extracellular side when analysed by MALDI-TOF MS. A new hSVCT1 secondary structure model supporting these findings is proposed.

60 APPLIED LIFE SCIENCES↗

The Electron Bifurcating FixABCX Protein Complex from Azotobacter vinelandii : Generation of Low-Potential Reducing Equivalents for Nitrogenase Catalysis

The biological reduction of dinitrogen (N 2 ) to ammonia (NH 3 ) by nitrogenase is an energetically demanding reaction that requires low-potential electrons and ATP; however, pathways used to deliver the electrons from central metabolism to the reductants of nitrogenase, ferredoxin or flavodoxin, remain unknown for many diazotrophic microbes. The FixABCX protein complex has been proposed to reduce flavodoxin or ferredoxin using NADH as the electron donor in a process known as electron bifurcation. Herein, the FixABCX complex from Azotobacter vinelandii was purified and demonstrated to catalyze an electron bifurcation reaction: oxidation of NADH (E m = -320 mV) coupled to reduction of flavodoxin semiquinone (E m = -460 mV) and reduction of coenzyme Q (E m = 10 mV). Knocking out fix genes rendered ..delta..rnf A. vinelandii cells unable to fix dinitrogen, confirming that the FixABCX system provides another route for delivery of electrons to nitrogenase. Characterization of the purified FixABCX complex revealed the presence of flavin and iron-sulfur cofactors confirmed by native mass spectrometry, electron paramagnetic resonance spectroscopy, and transient absorption spectroscopy. Transient absorption spectroscopy further established the presence of a short-lived flavin semiquinone radical, suggesting that a thermodynamically unstable flavin semiquinone may participate as an intermediate in the transfer of an electron to flavodoxin. A structural model of FixABCX, generated using chemical cross-linking in conjunction with homology modeling, revealed plausible electron transfer pathways to both high- and low-potential acceptors. Altogether, this study informs a mechanism for electron bifurcation, offering insight into a unique method for delivery of low-potential electrons required for energy-intensive biochemical conversions.

09 BIOMASS FUELS↗

Oxygen-Vacancy-Induced Midgap States Responsible for the Fluorescence and the Long-Lasting Phosphorescence of the Inverse Spinel Mg(Mg,Sn)O 4

Samples of inverse spinel Mg 2 SnO 4 were prepared using a ceramic method, their phosphorescence phenomenon was probed by optical measurements, and its cause was explored on the basis of density functional theory calculations for model structures of Mg 2 SnO 4 with oxygen vacancies VO. Mg 2 SnO 4 exhibits long-lasting luminescence at two different wavelength regions, peaking at ~498 and ~755 nm. A Sn-VO-Sn defect plus a Mg vacancy VMg away from the VO generates the empty midgap states, σSn-Sn and σSn-Sn*, localized at the Sn-VO-Sn defect, while an oxygen vacancy VO between adjacent Sn 4+ and Mg 2+ sites creates a filled midgap state Sn 2+ (5s 2 lone pair) lying below the σ Sn-Sn level. The long-lasting luminescence at two different wavelength regions and the up-conversion photostimulated luminescence observed for undoped Mg 2 SnO 4 are well explained by considering the σ Sn-Sn * level as the trapping level for a photogenerated electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Surface Oxygen Vacancies in BiVO 4

Bismuth vanadate (BiVO 4 ) is a widely studied oxide in solar water splitting, known for its ease of synthesis, high charge extraction yields, and advantageous band alignment with water. We present a combined first-principles and experimental study of the electronic structure of the (010) surface of BiVO 4 aimed at disentangling the impact of the surface and bulk oxygen vacancies on the electronic structure and transport properties. We found that oxygen vacancies are deep donors at the surface as they are in the bulk; our calculations on defect and polaron formation energies suggest that, while polarons formed from oxygen vacancies in the bulk can contribute to conductivity, those at the surface likely do not. Our results also show that out-of-plane structural relaxations at the surface contribute to the relatively immobile nature of electron polarons derived from surface oxygen vacancies. The structural model derived from first-principles calculation was validated by comparing computed results with experimental measurements of single-crystal and epitaxially grown single-crystalline BiVO 4 samples. Finally, we also found a reasonably good agreement between our calculated and measured work functions for BiVO 4 samples with and without oxygen vacancies.

36 MATERIALS SCIENCE↗

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Theoretical Insights into the Structure of Tellurium Chloride Glasses

Here, the structure of the binary chalcohalide glasses Te 1-x CL x (0.35 <= x <= 0.65) is considered by combining experimental and theoretical results. The structural network properties are influenced by a competition between ionic and covalent bonding in such glasses. At first, a focus is placed on the detailed information available by using the complementary high-energy X-ray and the neutron diffractions in both the reciprocal and real spaces. The main characteristic suggested by the structure factors S(Q) concerns the presence of three length scales in the intermediate range order. The total correlation function T(r) lets us also suppose that the structure of these glasses is more complicated than Te-chain fragments with terminal Cl as demonstrated in crystalline Te 3 Cl 2 . Molecular dynamics simulations were subsequently performed on Te 3 Cl 2 and Te 2 Cl 3 , and coupled with the experimental data, a highly reticulated network of chalcogen atoms, with a fair amount of chlorine atoms bonded in a bridging mode, is proposed. The simulations clearly lead to a glass description that differs markedly from the simple structural model based on only Te atom chains and terminal Cl atoms. Solidstate NMR experiments and NMR parameters calculations allowed validation of the presence of Te highly coordinated with chlorine in these glasses.

36 MATERIALS SCIENCE↗

Determining Partial Atomic Charges for Liquid Water: Assessing Electronic Structure and Charge Models

Partial atomic charges provide an intuitive and efficient way to describe the charge distribution and the resulting intermolecular electrostatic interactions in liquid water. Many charge models exist and it is unclear which model provides the best assignment of partial atomic charges in response to the local molecular environment. In this work, we systematically scrutinize various electronic structure methods and charge models (Mulliken, natural population analysis, CHelpG, RESP, Hirshfeld, Iterative Hirshfeld, and Bader) by evaluating their performance in predicting the dipole moments of isolated water, water clusters, and liquid water as well as charge transfer in the water dimer and liquid water. Although none of the seven charge models is capable of fully capturing the dipole moment increase from isolated water (1.85 D) to liquid water (about 2.9 D), the Iterative Hirshfeld method performs best for liquid water, reproducing its experimental average molecular dipole moment, yielding a reasonable amount of intermolecular charge transfer, and showing modest sensitivity to the local water environment. The performance of the charge model is dependent on the choice of the density functional and the quantum treatment of the environment. The computed molecular dipole moment of water generally increases with the percentage of the exact Hartree–Fock exchange in the functional, whereas the amount of charge transfer between molecules decreases. For liquid water, including two full solvation shells of surrounding water molecules (within about 5.5 Å of the central water) in the quantum chemical calculation converges the charges of the central water molecule. Furthermore, our final pragmatic quantum chemical charge-assigning protocol for liquid water is the Iterative Hirshfeld method with M06-HF/aug-cc-pVDZ and a quantum region cutoff radius of 5.5 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative CHARMM and AMOEBA Simulations of Lanthanide Hydration Energetics and Experimental Aqueous-Solution Structures

The accurate understanding of metal ion hydration in solutions is a prerequisite for predicting stability, reactivity, and solubility. Herein, additive CHARMM force field parameters were developed to enable molecular dynamics simulations of lanthanide (Ln) speciation in water. Quantitatively similar to the much more resource-intensive polarizable AMOEBA potential, the CHARMM simulations reproduce the experimental hydration free energies and correlations in the first shell (Ln-oxygen distance and hydration number). Comparisons of difference pair-distribution functions obtained from the two simulation approaches with those from high-energy X-ray scattering experiments reveal good agreement of first coordination sphere correlations for the Lu3+ ion (CHARMM only), but further improvement to both approaches is required to reproduce the broad, non-Gaussian distribution seen from the La3+ experiment. Second-coordination sphere comparisons demonstrate the importance of explicitly including an anion in the simulation. This work describes the usefulness of less resource-intensive additive potentials in some complex chemical systems such as solution environments where multiple interactions have similar energetics. In addition, 3-dimensional descriptions of the La3+ and Lu3+ coordination geometries are extracted from the CHARMM simulations and generally discussed in terms of potential improvements to solute-structure modeling within solution environments.

Qiao, Baofu↗

Density Functional Theory Investigation of Oxidation Intermediates on Gold and Gold–Silver Surfaces

Gold and gold-silver alloys can be active and selective oxidation catalysts. Previous work has suggested that O 2 dissociation occurs at bimetallic step sites on gold-silver alloys, but the site responsible for the rest of the reaction steps has not been studied. As a first step in gaining insight into this issue, in this work we investigated the adsorption of oxygen and other oxidation intermediates on the (111) and (211) facets of gold-silver alloys using density functional theory. Oxygen and silver coverage effects were analyzed, and different model structures were compared. We also examined the energy barriers for the diffusion of atomic oxygen to gain insight into O migration and spillover. On (111) surfaces, O adsorption is much stronger at low O coverage (less than 0.22 ML), while on (211) surfaces O is strongly bound at both high and low O coverage. O diffusion across the step is faster than diffusion along the step. Ag stabilizes O, both when directly bound to it and when in an adjacent site. Ag also reduces repulsive O-O interactions at low O coverage. Our calculated reaction barriers for O-assisted CH 3 O dehydrogenation suggest that reaction is faster on steps than on terraces. Overall, our findings suggest that spillover of O from Ag-rich steps to Au-rich terraces does not occur, and that oxidation reactions on gold-silver alloys occurs on step sites. More specifically, oxidation likely occurs either on Ag-rich step sites or on Au-rich step sites that are adjacent to Ag-rich step sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydration structure of the barite (001)–water interface: Comparison of x-ray reflectivity with molecular dynamics simulations

The three-dimensional structure of the barite (001)-water interface was studied using in situ specular and non-specular X-ray reflectivity (XR). Displacements of the barium and sulfate ions in the surface of a barite crystal and the interfacial water structure were defined in the analyses. The largest relaxations (0.13 Å lateral and 0.08 Å vertical) were observed for the barium and sulfate ions in the topmost unit cell layer, which diminished rapidly with depth. The best fit structure identified four distinct adsorbed species, which in comparison with molecular dynamics (MD) simulations, reveals that they are associated with positions of adsorbed water, each of which coordinates one or two surface ions (either barium, sulfate, or both). These water molecules also adsorb in positions consistent with those of bariums and sulfates in the bulk crystal lattice. These results demonstrate the importance of combining high resolution XR with MD simulations to fully describe the atomic structure of the hydrated mineral surface. As a result, the agreement between the results indicates both the uniqueness of the structural model obtained from the XR analysis and the accuracy of the force field used in the simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Theoretical Study of Azimuth Angle and Polarization Dependences of Sum-Frequency-Generation Vibrational Spectral Features of Uniaxially Aligned Cellulose Crystals

Comprehensive interpretation of vibrational sum-frequency-generation (SFG) spectroscopic features of SFG-active nanodomains interspersed in amorphous bulk requires the knowledge of nonlinear susceptibility, χ ijk (2) , of the SFG-active phase as a function of its spatial arrangement in the bulk as well as the polarizations of the probe lights. Our work reports the full analysis of the azimuth angle and polarization dependence of SFG signals from a control sample consisting of uniaxially aligned cellulose Iβ crystals. The χ ijk (2) terms of cellulose were estimated from quantum mechanics calculations using time-dependent density functional theory (TD-DFT), and a simple structural model was built with truncated glucose dimers. The theoretical azimuth angle and polarization dependences of characteristic CH/CH 2 and OH stretch modes of cellulose were compared with the experimentally observed trends. These comparisons revealed that the relative polarity of crystallites within the SFG coherence length, the random quasi phase-matching of polycrystalline domains, and the preferential packing of crystallites in the bulk play important roles governing the spectral features. Compared to that of small molecules, the difference between chiral and achiral responses in SFG spectra is more difficult to confirm because of the inhomogeneous distribution of crystallites in the bulk sample.

59 BASIC BIOLOGICAL SCIENCES↗

Polynuclear Speciation of Trivalent Cations near the Surface of an Electrolyte Solution

Despite long-standing efforts, there is no agreed upon structural model for electrolyte solutions at air-liquid interfaces. We report the simultaneous detection of the near-surface and bulk coordination environments of a trivalent metal cation (europium) in an aqueous solution by use of X-ray absorption spectroscopy. Within the first few nanometers of the liquid surface, the cations exhibit oxygen coordination typical of inner-sphere hydration of an aquated Eu3+ cation. Beyond that, outer-sphere ion-ion correlations are observed that are otherwise not present in the bulk electrolyte. The combination of near-surface and bulk sensitivities to probe metal ion speciation in electrolyte solutions is achieved by detecting electron-yield and X-ray fluorescence signals from an inverted pendant drop. The results provide new knowledge about the near-surface chemistry of aqueous solutions of relevance to aerosols and ion transport processes in chemical separations and biological systems.

Electrolytes↗

Copper-Intercalated Birnessite as a Water Oxidation Catalyst

Here, we report a synthetic method to increase the catalytic activity of birnessite toward water oxidation by intercalating copper in the interlayer region of the layered manganese oxide. Intercalation of copper, verified by XRD, XPS, ICP, and Raman spectroscopy, was accomplished by exposing a suspension of birnessite to a Cu + -bearing precursor molecule that underwent disproportionation in solution to yield Cu 0 and Cu 2+ . Electrocatalytic studies reflected that the Cu-modified birnessite exhibited an overpotential for water oxidation of ~490 mV (at 10 mA/cm 2 ) and a Tafel slope of 126 mV/decade compared to ~700 mV (at 10 mA/cm 2 ) and 240 mV/decade, respectively, for birnessite without copper. Impedance spectroscopy results suggested that the charge transfer resistivity of the Cu-modified sample was significantly lower than Cu-free birnessite, suggesting that Cu in the interlayer increased the conductivity of birnessite leading to an enhancement of water oxidation kinetics. Density functional theory calculations show that the intercalation of Cu 0 into a layered MnO 2 model structure led to a change of the electronic properties of the material from a semiconductor to a metallic-like structure. This conclusion from computation is in general agreement with the aforementioned impedance spectroscopy results. X-ray photoelectron spectroscopy (XPS) showed that Cu 0 coexisted with Cu 2+ in the prepared Cu-modified birnessite. Control experiments using birnessite that was decorated with only Cu 2+ showed a reduction in water oxidation kinetics, further emphasizing the importance of Cu 0 for the increased activity of birnessite. The introduction of Cu 0 into the birnessite structure also increased the stability of the electrocatalyst. At a working current of 2 mA, the Cu-modified birnessite took ~3 times longer for the overpotential for water oxdiation to increase by 100 mV compared to when Cu was not present in the birnessite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Thermal Transitions in a Biomedically Relevant Liquid Crystalline Poly(ester amide)

There is still a need to develop bioresorbable polymers with high strength and high modulus for load-bearing biomedical applications. In this work we investigate the liquid crystalline structural features of poly(desaminotyrosyl-tyrosine dodecyl dodecanedioate), poly(DTD DD), a new bioresorbable poly(ester amide) that is currently studied in vivo as a slow-degrading implantable biomaterial for load bearing applications. Thermally induced structural changes in poly(DTD DD) were studied using simultaneously differential scanning calorimetry (DSC) and X-ray scattering. The hexatic SmB organization of the polymer chains that exists at room temperature becomes progressively disordered upon heating, changing into a SmF phase and then into a smectic C phase at 60 °C before turning into a free-flowing melt at 130 °C. X-ray scattering data and thermal analysis indicate the presence of a 2D ordered structure in the polymer melt. A structural model with an interesting 3- fold symmetry in the packing of the side chains around the rigid aromatic main chain, and the packing of these chains into fibrils is proposed. The liquid crystalline behavior of poly(DTD DD) makes it possible to melt process it at low temperatures without thermal degradation. This is a noteworthy advantage for the use of poly(DTD DD) as a high strength, readily processable, yet biodegradable polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of Two-Electron and Four-Electron Electrochemical Oxygen Reduction Reactions at Nitrogen-Doped Reduced Graphene Oxide

Doped carbon-based systems have been extensively studied over the past decade as active electrocatalysts for both the two-electron (2e – ) and four-electron (4e – ) oxygen reduction reactions (ORRs). However, the mechanisms for ORR are generally poorly understood. Here, we report an extensive experimental and first-principles theoretical study of the ORR at nitrogen-doped reduced graphene oxide (NrGO). We synthesize three distinct NrGO catalysts and investigate their chemical and structural properties in detail via X-ray photoelectron spectroscopy, infrared and Raman spectroscopies, high-resolution transmission electron microscopy, and thin-film electrical conductivity. ORR experiments include the pH dependences of 2e – versus 4e – ORR selectivity, ORR onset potentials, Tafel slopes, and H/D kinetic isotope effects. These experiments show very different ORR behavior for the three catalysts, in terms of both selectivity and the underlying mechanism, which proceeds either via coupled proton–electron transfers (CPETs) or non-CPETs. Reasonable structural models developed from density functional theory rationalize this behavior. The key determinant between CPET vs non-CPET mechanisms is the electron density at the Fermi level under operating ORR conditions. Regardless of the reaction mechanism or electrolyte pH, however, we identify the ORR active sites as sp 2 carbons that are located next to oxide regions. This assignment highlights the importance of oxygen functional groups, while details of (modest) N-doping may still affect the overall catalytic activity, and likely also the selectivity, by modifying the general chemical environment around the active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Characterization of the Reaction and Substrate Specificity Mechanisms of Pathogenic Fungal Acetyl-CoA Synthetases

Acetyl CoA synthetases (ACSs) are Acyl-CoA/NRPS/Luciferase (ANL) superfamily enzymes that couple acetate with CoA to generate acetyl CoA, a key component of central carbon metabolism in eukaryotes and prokaryotes. Normal mammalian cells are not dependent on ACSs, while tumor cells, fungi, and parasites rely on acetate as a precursor for acetyl CoA. Consequently, ACSs have emerged as a potential drug target. As part of a program to develop antifungal ACS inhibitors, we characterized fungal ACSs from five diverse human fungal pathogens using biochemical and structural studies. ACSs catalyze a two-step reaction involving adenylation of acetate followed by thioesterification with CoA. Our structural studies captured each step of these two half-reactions including the acetyl-adenylate intermediate of the first half-reaction in both the adenylation conformation and the thioesterification conformation and thus provide a detailed picture of the reaction mechanism. We also used a systematic series of increasingly larger alkyl adenosine esters as chemical probes to characterize the structural basis of the exquisite ACS specificity for acetate over larger carboxylic acid substrates. Consistent with previous biochemical and genetic data for other enzymes, structures of fungal ACSs with these probes bound show that a key tryptophan residue limits the size of the alkyl binding site and forces larger alkyl chains to adopt high energy conformers, disfavoring their efficient binding. Together, our analysis provides highly detailed structural models for both the reaction mechanism and substrate specificity that should be useful in designing selective inhibitors of eukaryotic ACSs as potential anticancer, antifungal, and antiparasitic drugs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computationally Guided Discovery and Experimental Validation of Indole-3-acetic Acid Synthesis Pathways

Elucidating the interaction networks associated with secondary metabolite production in microorganisms is an ongoing challenge made all the more daunting by the rate at which DNA sequencing technology reveals new genes and potential pathways. Developing the culturing methods, expression conditions, and genetic systems needed for validating pathways in newly discovered microorganisms is often not possible. Therefore, new tools and techniques are needed for defining complex metabolic pathways. Here, we describe an in vitro computationally assisted pathway description approach that employs bioinformatic searches of genome databases, protein structural modeling, and protein–ligand-docking simulations to predict the gene products most likely to be involved in a particular secondary metabolite production pathway. This information is then used to direct in vitro reconstructions of the pathway and subsequent confirmation of pathway activity using crude enzyme preparations. As a test system, we elucidated the pathway for biosynthesis of indole-3-acetic acid (IAA) in the plant-associated microbe Pantoea sp. YR343. This organism is capable of metabolizing tryptophan into the plant phytohormone IAA. BLAST analyses identified a likely three-step pathway involving an amino transferase, an indole pyruvate decarboxylase, and a dehydrogenase. However, multiple candidate enzymes were identified at each step, resulting in a large number of potential pathway reconstructions (32 different enzyme combinations). Our approach shows the effectiveness of crude extracts to rapidly elucidate enzymes leading to functional pathways. Furthermore, results are compared to affinity purified enzymes for select combinations and found to yield similar relative activities. Further, in vitro testing of the pathway reconstructions revealed the “underground” nature of IAA metabolism in Pantoea sp. YR343 and the various mechanisms used to produce IAA. Importantly, our experiments illustrate the scalable integration of computational tools and cell-free enzymatic reactions to identify and validate metabolic pathways in a broadly applicable manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conformational Dynamics of AcrA Govern Multidrug Efflux Pump Assembly

Multidrug efflux pumps of pathogenic, Gram-negative bacteria comprise an innate resistance mechanism and are key contributors to the emerging global pandemic of antibiotic resistance. Several increasingly detailed cryo-electron microscopy maps have been resolved of an entire efflux pump complex, AcrAB–TolC, resulting in atomistic structural models. Using a recent model, we have carried out nearly 40 μs of molecular dynamics simulations to study one of the key components of the protein complex AcrA, the membrane fusion protein that connects the inner-membrane-bound AcrB to the outer-membrane-bound TolC. Here, we determined a three-dimensional potential of mean force (PMF) for AcrA, which displays two main conformational basins representing assembly competent and incompetent states. Corresponding experiments show that stabilizing mutations at an interdomain interface shift the dynamic equilibrium between these states to the incompetent one, disrupting pump assembly and function and resensitizing bacteria to existing antibiotics. The modulation of AcrA dynamics through pharmacological intervention therefore presents a promising route for the development of new antibiotics.

59 BASIC BIOLOGICAL SCIENCES↗