Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Missing data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Search for Higgsinos in final states with low-momentum lepton-track pairs at 13 TeV

We present a search for the pair production of Higgsinos in final states with large missing transverse momentum and either two reconstructed muons or a reconstructed lepton (muon or electron) and an isolated track. The analyzed data correspond to proton-proton collisions with an integrated luminosity of 137 fb −1 , collected by the CMS experiment at $\sqrt{𝑠}$ =13 TeV in 2016, 2017, and 2018. The signal scenario assumes four nearly mass degenerate Higgsino mass eigenstates: two neutralino states $\tilde{𝜒}^0_2$ and $\tilde{𝜒}^0_1$ with a small mass difference in the range 1–10 GeV and two chargino states $\tilde{𝜒}^±_1$ with an intermediate mass. The analysis focuses on the decay of the heavier neutralino into the lighter one and a virtual 𝑍 boson, which decays into two same-flavor leptons. The leptons have small transverse momentum and/or a small opening angle between the identified muons. An isolated track is used to recover events in which only one of the two leptons is identified. Multivariate discriminants are used to enhance the sensitivity by efficiently rejecting backgrounds from SM processes or misreconstructed tracks and/or leptons. The search explores a unique phase space and probes a previously unexplored region of the signal model parameter space. Mass differences between the two neutralinos are probed down to 1.5 GeV, assuming a Higgsino mass of 100 GeV. The maximum excluded Higgsino mass is 115 GeV.

Hayrapetyan, A. [Yerevan Physics Institute]↗

Audiovisual Fusion: Challenges and New Approaches

In this study, we review recent results on audiovisual (AV) fusion. We also discuss some of the challenges and report on approaches to address them. One important issue in AV fusion is how the modalities interact and influence each other. This review will address this question in the context of AV speech processing, and especially speech recognition, where one of the issues is that the modalities both interact but also sometimes appear to desynchronize from each other. An additional issue that sometimes arises is that one of the modalities may be missing at test time, although it is available at training time; for example, it may be possible to collect AV training data while only having access to audio at test time. We will review approaches to address this issue from the area of multiview learning, where the goal is to learn a model or representation for each of the modalities separately while taking advantage of the rich multimodal training data. In addition to multiview learning, we also discuss the recent application of deep learning (DL) toward AV fusion. We finally draw conclusions and offer our assessment of the future in the area of AV fusion.

47 OTHER INSTRUMENTATION↗

Search for dark matter at $\sqrt{s}=13~\mathrm{TeV}$ TeV in final states containing an energetic photon and large missing transverse momentum with the ATLAS detector

Results of a search for physics beyond the Standard Model in events containing an energetic photon and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. As the number of events observed in data, corresponding to an integrated luminosity of 36.1 fb –1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, is in agreement with the Standard Model expectations, model-independent limits are set on the fiducial cross section for the production of events in this final state. Exclusion limits are also placed in models where dark-matter candidates are pair-produced. For dark-matter production via an axial-vector or a vector mediator in the s-channel, this search excludes mediator masses below 750–1200 GeV for dark-matter candidate masses below 230–480 GeV at 95% confidence level, depending on the couplings. In an effective theory of dark-matter production, the limits restrict the value of the suppression scale M * to be above 790 GeV at 95% confidence level. A limit is also reported on the production of a high-mass scalar resonance by processes beyond the Standard Model, in which the resonance decays to Zγ and the Z boson subsequently decays into neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Z Z production in p p collisions at s = 7 TeV and limits on anomalous Z Z Z and Z Z γ couplings with the ATLAS detector

CERN-LHC. Measurements of the cross section for ZZ production using the 4l and 2l2nu decay channels in proton-proton collisions at a centre-of-mass energy of 7 TeV with 4.6 fb^-1 of data collected in 2011. The final states used are 4 electrons, 4 muons, 2 electrons and 2 muons, 2 electrons and missing transverse momentum, and 2 muons and missing transverse momentum (MET).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in s = 8TeV p p collisions with the ATLAS detector

CERN-LHC. A search for the direct production of charginos and neutralinos in final states with three leptons and missing transverse momentum is presented. The analysis is based on 20.3 fb^-1 of sqrt(s) = 8 TeV proton--proton collision data delivered by the Large Hadron Collider and recorded in 2012 with the ATLAS detector. Observations are consistent with the Standard Model expectations and limits are set in R-parity-conserving phenomenological Minimal Supersymmetric Standard Models and in simplified supersymmetric models, significantly extending previous results. For simplified supersymmetric models of direct chargino (C1) and next-to-lightest neutralino (N2) production with decays to lightest neutralino (N1) via either all three generations of sleptons, staus only, gauge bosons, or Higgs bosons, C1 and N2 masses are excluded up to 700 GeV, 380 GeV, 345 GeV, or 148 GeV respectively, for a massless N1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Z Z production cross section in p p collisions at s = 8 TeV using the Z Z → ℓ − ℓ + ℓ ′ − ℓ ′ + and Z Z → ℓ − ℓ + ν ν ¯ channels with the ATLAS detector

CERN-LHC. Measurements of the cross section for ZZ production using the 4l and 2l2nu decay channels in proton-proton collisions at a centre-of-mass energy of 8 TeV with 20.3 fb^-1 of data collected in 2012. The final states used are 4 electrons, 4 muons, 2 electrons and 2 muons, 2 electrons and missing transverse momentum, and 2 muons and missing transverse momentum (MET).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Jobs, jobs, jobs: what’s an analyst to do?

Analysts and economists often face the task of using employment metrics to characterize industries of interest. Some key challenges can be understanding where to find employment metrics, the differences in various employment metrics, and when each metric should be used. This article analyzes a variety of publicly available employment data for the United States and compares these data. A detailed description of the intricacies of each data source is provided, which covers factors such as regionality, industry breakout, periodicity, and the types of jobs included. This article provides several case study examples, using the oil and gas extraction, coal mining, and chemical manufacturing sectors to portray challenges data users may face when developing employment estimates that suit their needs. Data users should be aware of a variety of data sources to understand alternative analysis options when data limitations are present and to determine which data source best meets their needs. Instances may occur in which information from one dataset may be used to help impute missing values.

99 GENERAL AND MISCELLANEOUS↗

Automated vehicle guidance using discrete reference markers

Techniques for providing steering control for an automated vehicle using discrete reference markers fixed to the road surface are investigated analytically. Either optical or magnetic approaches can be used for the sensor, which generates a measurement of the lateral offset of the vehicle path at each marker to form the basic data for steering control. Possible mechanizations of sensor and controller are outlined. Techniques for handling certain anomalous conditions, such as a missing marker, or loss of acquisition, and special maneuvers, such as u-turns and switching, are briefly discussed. A general analysis of the vehicle dynamics and the discrete control system is presented using the state variable formulation. Noise in both the sensor measurement and in the steering servo are accounted for. An optimal controller is simulated on a general purpose computer, and the resulting plots of vehicle path are presented. Parameters representing a small multipassenger tram were selected, and the simulation runs show response to an erroneous sensor measurement and acquisition following large initial path errors.

Johnston, A. R.↗

Comet Halley ephemeris uncertainties in 1985-1986

For the planned flyby missions to Comet Halley in March 1986, the comet's ephemeris uncertainties completely dominate the spacecraft-comet miss distance. In an effort to determine realistic Comet Halley ephemeris uncertainties, a statistical covariance analysis was conducted using the actual data in 1909-1910-1911 and simulated data in 1984-1985-1986. In 1985-1986, Comet Halley's ephemeris uncertainties are very sensitive to the comet's orbital position, the optical data noise, data schedule, and whether or not the old data is included in the orbital solutions. The comet's ephemeris uncertainties in March 1986 are relatively insensitive to reasonable center of light/center of mass offsets and also to possible radar data taken in late November 1985. Accurate Space Telescope observations made in early March 1986 might significantly improve upon the comet's position uncertainties for the various intercepting spacecraft.

Yeomans, D. K.↗

Method for Estimating Thread Strength Reduction of Damaged Parent Holes with Inserts

During normal assembly and disassembly of bolted-joint components, thread damage and/or deformation may occur. If threads are overloaded, thread damage/deformation can also be anticipated. Typical inspection techniques (e.g. using GO-NO GO gages) may not provide adequate visibility of the extent of thread damage. More detailed inspection techniques have provided actual pitch-diameter profiles of damaged-hardware holes. A method to predict the reduction in thread shear-out capacity of damaged threaded holes has been developed. This method was based on testing and analytical modeling. Test samples were machined to simulate damaged holes in the hardware of interest. Test samples containing pristine parent-holes were also manufactured from the same bar-stock material to provide baseline results for comparison purposes. After the particular parent-hole thread profile was machined into each sample a helical insert was installed into the threaded hole. These samples were tested in a specially designed fixture to determine the maximum load required to shear out the parent threads. It was determined from the pristine-hole samples that, for the specific material tested, each individual thread could resist an average load of 3980 pounds. The shear-out loads of the holes having modified pitch diameters were compared to the ultimate loads of the specimens with pristine holes. An equivalent number of missing helical coil threads was then determined based on the ratio of shear-out loads for each thread configuration. These data were compared with the results from a finite element model (FEM). The model gave insights into the ability of the thread loads to redistribute for both pristine and simulated damage configurations. In this case, it was determined that the overall potential reduction in thread load-carrying capability in the hardware of interest was equal to having up to three fewer threads in the hole that bolt threads could engage. One- half of this potential reduction was due to local pitch-diameter variations and the other half was due to overall pitch-diameter enlargement beyond Class 2 fit. This result was important in that the thread shear capacity for this particular hardware design was the limiting structural capability. The details of the method development, including the supporting testing, data reduction and analytical model results comparison will be discussed hereafter.

Johnson, David L.↗

Linear Mixed-Effects Models for Human-in-the-Loop Tracking Experiment Data

Linear mixed-effects models provide several benefits over more traditional statistical inference tests that are particularly useful for most human-in-the-loop tracking experiment data. However, surprisingly, mixed models are virtually not used for the analysis of tracking experiment data. This paper uses of linear mixed-effects models to analyze combined tracking data from two previous human-in-the-loop roll tracking experiments that compared control behavior metrics collected in both a research aircraft and a motion-base simulator. In the experiments, pilots' behavior under 10 different motion configurations with varying motion filter gains and break frequencies was evaluated and compared to that in the real aircraft. The linear mixed-effects model analysis on the combined dataset confirmed the main statistical outcomes of the individual experiments. The main benefits of mixed models for this type of data were demonstrated by successfully combining data from two experiments that used different experimental conditions and of which one had an additional apparatus and the other a missing participant. Finally, the mixed-model analysis was able to explicitly test for scientifically relevant statistical differences in the dependent measures between the aircraft and simulator, as well as both experiments.

manual control↗

Search for Supersymmetry in Events with Three Leptons and Missing Transverse Momentum in root s=7 TeV pp Collisions with the ATLAS Detector

A search for the weak production of charginos and neutralinos decaying to a final state with three leptons (electrons or muons) and missing transverse momentum is presented. The analysis uses 2.06 fb{sup -1} of {radical}s = 7 TeV proton-proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with standard model expectations in two signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric and simplified models. For the simplified models, degenerate lightest chargino and next-to-lightest neutralino masses up to 300 GeV are excluded for mass differences from the lightest neutralino up to 300 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Wintertime nitric acid chemistry - Implications from three-dimensional model calculations

A three-dimensional simulation of the evolution of HNO3 has been run for the winter of 1979. Winds and temperatures are taken from a stratospheric data assimilation analysis, and the chemistry is based on Limb Infrared Monitor of the Stratosphere (LIMS) observations. The model is compared to LIMS observations to investigate the problem of 'missing' nitric acid chemistry in the winter hemisphere. Both the model and observations support the contention that a nitric acid source is needed outside of the polar vortex and north of the subtropics. Observations suggest that HNO3 is not dynamically controlled in middle latitudes. The model shows that given the time scales of conventional chemistry, dynamical control is expected. Therefore, an error exists in the conventional chemistry or additional processes are needed to bring the model and data into agreement. Since the polar vortex is dynamically isolated from the middle latitudes, and since the highest HNO3 values are observed in October and November, a source associated solely with polar stratospheric clouds cannot explain the deficiencies in the chemistry. The role of heterogeneous processes on background aerosols is reviewed in light of these results.

Rood, Richard B.↗

Genomes to ecosystem function: Targeting critical knowledge gaps in methanogenesis and translation to updated global biogeochemical models

Natural freshwater temperate wetland systems currently represent the largest natural source of atmospheric methane, but are relatively understudied using systems biology tools (e.g. meta-omics) compared to other high producing methane systems (e.g. peat, tropical, or reconstructed wetlands). Using field investigations at the NOAA operated sentinel site on Lake Erie, methane producing activities and responses to geochemical conditions will be determined along seasonal and spatial gradients (Objective 1). Here, a combination of high-throughput activity and gas measurements, combined with high-resolution systems biology and analytical methods, will provide in depth knowledge of the microbiological, chemical, and physical constraints on methane production in wetlands. Using laboratory microcosms, the formation of anoxic microsites and their capacity to facilitate methane production in wetland soils will be simulated (Objective 2). This objective will validate the findings from the field investigations, offering a more controlled environment for teasing out the role of different yet interrelated variables. Lastly, these field and laboratory data will be used for multi-scale, process-level evaluation of an ecosystem biogeochemical model that accommodates these newly identified processes and parameterizes representation of these processes along relevant environmental gradients (Objective 3).This research will identify multiple interacting geochemical, ecological, and metabolic constraints that are poorly understood, oversimplified, or missing in global biogeochemical methane models. This proposal targets the role of oxygen limitation on methane processes in soil domains, to improve reactive transport models of microbial carbon cycling across terrestrial-aquatic soils and generate data on nutrient cycling activities in Great Lake wetlands. This information could provide new insights into the microbial controllers of Lake Erie eutrophication.

59 BASIC BIOLOGICAL SCIENCES↗

Development and evaluation of a list mode neutron coincidence collar for spatial response measurements of fresh fuel assemblies

A traditional safeguards neutron coincidence counting system, the Neutron Coincidence Collar, has been modified to incorporate individual preamplifiers on each of its 18 3He tubes in active interrogation mode. When used with list mode data acquisition (LMDA) and analysis, a signal from each 3He tube can be recorded and analyzed to allow a spatial response measurement to be performed on an item based on count rate and 3He tube location within the system. The ultimate goal of this project is to demonstrate the capabilities of a list mode response matrix for the nondestructive assay of fresh nuclear fuel assemblies. To enable partial defect detection of fuel pin locations and absences within an assembly, the project aims to extend well-established correlated neutron analysis techniques on a preexisting Neutron Coincidence Collar by extracting a greater number of useful signatures from the system than are currently generated. LMDA, combined with the addition of multiple preamplifiers, facilitates this capability by increasing the number of simultaneous signals that can be measured; this allows an in-depth analysis of neutron coincidence events to determine a fissioning item’s location based on the measured doubles count rate in various channel logic coincidence combinations. All of this can be done from a single measurement pulse train in offline analysis, which is the major benefit provided by LMDA. Through various stages of development and testing, a Mirion Technologies model JCC-71 Neutron Coincidence Collar has been successfully retrofit with modern electronics designed in-house at Oak Ridge National Laboratory, matching preexisting JAB-01 electronics performance, while maintaining the original system footprint. This paper presents these various stages of development and experimental evaluation of the proof of concept system.

Moore, Angela S.↗

Data Preservation, Information Preservation, and Lifecyle of Information Management at NASA GES DISC

Data lifecycle management awareness is common today; planners are more likely to consider lifecycle issues at mission start. NASA remote sensing missions are typically subject to life cycle management plans of the Distributed Active Archive Center (DAAC), and NASA invests in these national centers for the long-term safeguarding and benefit of future generations. As stewards of older missions, it is incumbent upon us to ensure that a comprehensive enough set of information is being preserved to prevent the risk for information loss. This risk is greater when the original data experts have moved on or are no longer available. Preservation of items like documentation related to processing algorithms, pre-flight calibration data, or input-output configuration parameters used in product generation, are examples of digital artifacts that are sometimes not fully preserved. This is the grey area of information preservation; the importance of these items is not always clear and requires careful consideration. Missing important metadata about intermediate steps used to derive a product could lead to serious challenges in the reproducibility of results or conclusions. Organizations are rapidly recognizing that the focus of life-cycle preservation needs to be enlarged from the strict raw data to the more encompassing arena of information lifecycle management. By understanding what constitutes information, and the complexities involved, we are better equipped to deliver longer lasting value about the original data and derived knowledge (information) from them. The NASA Earth Science Data Preservation Content Specification is an attempt to define the content necessary for long-term preservation. It requires new lifecycle infrastructure approach along with content repositories to accommodate artifacts other than just raw data. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) setup an open-source Preservation System capable of long-term archive of digital content to augment its raw data holding. This repository is being used for such missions as HIRDLS, UARS, TOMS, OMI, among others. We will provide a status of this implementation; report on challenges, lessons learned, and detail our plans for future evolution to include other missions and services.

data management↗

Evidence for Large Decadal Variability in the Tropical Mean Radiative Energy Budget

It is widely assumed that variations in the radiative energy budget at large time and space scales are very small. We present new evidence from a compilation of over two decades of accurate satellite data that the top-of-atmosphere (TOA) tropical radiative energy budget is much more dynamic and variable than previously thought. We demonstrate that the radiation budget changes are caused by changes In tropical mean cloudiness. The results of several current climate model simulations fall to predict this large observed variation In tropical energy budget. The missing variability in the models highlights the critical need to Improve cloud modeling in the tropics to support Improved prediction of tropical climate on Inter-annual and decadal time scales. We believe that these data are the first rigorous demonstration of decadal time scale changes In the Earth's tropical cloudiness, and that they represent a new and necessary test of climate models.

Wielicki, Bruce A.↗

On piecewise interpolation techniques for estimating solar radiation missing values in Kedah

This paper discusses the use of piecewise interpolation method based on cubic Ball and Bézier curves representation to estimate the missing value of solar radiation in Kedah. An hourly solar radiation dataset is collected at Alor Setar Meteorology Station that is taken from Malaysian Meteorology Deparment. The piecewise cubic Ball and Bézier functions that interpolate the data points are defined on each hourly intervals of solar radiation measurement and is obtained by prescribing first order derivatives at the starts and ends of the intervals. We compare the performance of our proposed method with existing methods using Root Mean Squared Error (RMSE) and Coefficient of Detemination (CoD) which is based on missing values simulation datasets. The results show that our method is outperformed the other previous methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗