SEARCH · Engineering Papers

Results for “Material Attractiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Carbon Dioxide Utilization Life Cycle Analysis Guidance for the U.S. DOE Office of Fossil Energy and Carbon Management (Version 2.0)

Capturing carbon dioxide (CO 2 ) and placing it in permanent storage in geologic formations is an option for reducing CO 2 emissions, but it may not be a viable one for all CO 2 emitters. For some, the added cost of capture may be too high to implement, or the geology near the source may not be suitable for storage. In these circumstances, other options will be needed. Carbon use and reuse, or CO 2 utilization (CO2U), is an alternative approach that seeks beneficial uses for captured CO 2 , such as using it as a feedstock in the production of fuels, chemicals, and building materials. These uses would give CO 2 value that could be used by suppliers (emitters) to offset capture costs. One of the principal features and challenges associated with CO2U is that the products derived from CO 2 must have lower carbon footprints than their conventional counterparts. Previous assessments of CO2U alternatives have focused on the carbon content of utilization products as an indicator of CO 2 equivalent (CO 2 e) emissions reduction potential. However, embodied emissions are—at best—only weakly correlated with the amount of carbon contained in any physical product. Therefore, the most attractive CO2U options will both displace the carbon in an existing product and improve the overall carbon efficiency of the manufacturing process. Research to overcome barriers will include identifying existing co-feeds and available low-carbon energy sources to enable the conversion of CO 2 to value-added products under favorable processing conditions. New discoveries in the fields of nano- and bio-technology will be applied to efficiently utilize CO 2 in new applications. Development of advanced materials and processes, integrating CO 2 capture with utilization processes (e.g., algae), exploring a diverse slate of products from CO 2 to effectively offset capture costs and developing processes based on waste energy are means to overcome these barriers. The research will lead to the development of advanced catalysts, materials, and equipment that can be used to convert CO 2 into useful products. The result will be multiple flexible and adaptable technology platforms that can be used to produce suites of products spanning multiple utilization pathways.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Amorphous Manganese Oxides: An Approach for Reversible Aqueous Zinc-Ion Batteries

Crystalline manganese oxides have attracted the most attention in aqueous zinc-ion batteries due to their diverse nanostructures and low cost. However, extensive studies on amorphous manganese oxides are lacking. Here in this paper, we report a mesoporous amorphous manganese oxide (UCT-1-250) as a cathode material with high capacity (222 mAh g –1 ), good cyclability (57% capacity retention after 200 cycles), and an acceptable discharge plateau (between 1.2 and 1.4 V). An approach to mechanistic studies was performed by comparison of UCT-1-250 and other crystalline manganese oxides through electrochemical, elemental, and structural analyses. An in situ conversion to ZnMn 2 O 4 spinel phase after initial cycling contributes to the high performance. The irreversible capacity fading is due to the formation of the woodruffite phase.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Ultradynamic Isoreticularly Expanded Porous Organic Crystals

Porous organic materials showcasing large framework dynamics present new paths for adsorption and separation with enhanced capacity and selectivity beyond the size-sieving limits, which is attributed to their guest-responsive sorption behaviors. Porous hydrogen-bonded crosslinked organic frameworks (H C OFs) are attractive for their remarkable ability to undergo guest-triggered expansion and contraction facilitated by their flexible covalent crosslinkages. However, the voids of H C OFs remain limited, which restrains the extent of the framework dynamics. Here in this work, we synthesized a series of H C OFs characterized by unprecedented size expansion capabilities induced by solvents. These H C OFs were constructed by isoreticularly co-crystallizing two complementary sets of hydrogen bonding building blocks to generate porous molecular crystals, which were crosslinked through thiol–ene/yne single-crystal-to-single-crystal transformations. The generated H C OFs exhibit enhanced chemical durability, high crystallinity, and extraordinary framework dynamics. For instance, H C OF-104 crystals featuring a pore diameter of 13.6 Å expanded in DMF to 300 ± 10% of their original lengths within just 1 min. This expansion allows the HCOFs to adsorb guest molecules that are significantly larger than the pore sizes of their crystalline states. Through methanol-induced contraction, these large guests were encapsulated in the fast-contracted H C OFs. These advancements in porous framework dynamics pave the way for new methods of encapsulating guests for targeted delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Multifunctional entinostat enhances the mechanical robustness and efficiency of flexible perovskite solar cells and minimodules

Flexible perovskite solar cells (F-PSCs), prized for their nature of soft and high power-weight compatibility, have attracted intensive attention. However, inferior buried perovskite-substrate interfaces due to low interfacial adhesion between perovskites and substrates and large deformation of flexible substrates have greatly limited the performance of F-PSCs. Here, we add organic molecule Entinostat (ET) into hole extraction material Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) to enhance the adhesion at the perovskite/substrate interface using the interactions of ET with perovskites, PTAA and indium tin oxide (ITO) through its multiple function groups. Meanwhile, ET added into perovskites reduces the voids at the bottom perovskite film, due to its capability to tune the crystallization of perovskites by forming adduct with lead. Consequently, the inverted small area F-PSCs achieved an efficiency of 23.4%. The flexible perovskite minimodule with an area of 9 cm 2 achieved an aperture efficiency of ~19.0% certified by National Renewable Energy Laboratory. Furthermore, the optimized unencapsulated flexible minimodule retained 84% of the initial efficiency after 5000 bending cycles and retained 90% of the initial PCE (T90) after light soaking for >750 hours.

14 SOLAR ENERGY↗

DOE OSTI2025

Grid-Assisted Direct-Current Magnetron Sputtering of Titanium: Plasma Discharge Diagnostics

Grid-assisted magnetron sputtering is attractive for the deposition of ultrathick Be coatings in inertial confinement fusion (ICF) applications because it offers improved control over the plasma. Here, we investigate the plasma discharge characteristics of grid-assisted direct current magnetron sputtering with Ti as a surrogate sputter target material instead of Be. We map the magnetic field of our magnetron source assembly, study the current-voltage characteristics of both the source and the substrate, and measure the energy distributions of ions bombarding the film surface during growth. The results reveal a slightly asymmetric magnetic field of the magnetron source array and strong dependencies of the plasma discharge characteristics on both the grid and the substrate voltages. Positive grid voltage increases both target and substrate currents, increases the plasma potential, and broadens the energy distributions of ions bombarding the substrate. Grid biasing effects on the plasma discharge characteristics and substrate current can be attributed to corresponding changes to the plasma potential, while substrate biasing effects are more complex and nonlinear. Furthermore, these results demonstrate that grid-assisted deposition offers additional flexibility in controlling the deposition process for tuning properties of ultrathick films for ICF applications.

ICF targets↗

DOE OSTI2021

Observation of Defect-Assisted Magnetic Vortex Core Reversal at Ultralow Critical Velocity

The stability of structures with nontrivial topology is a subject of great interest, both from fundamental and technological perspectives. The topology of a magnetic vortex, for example, results in high stability of the vortex core polarity, which is attractive for applications. This high stability, however, greatly impedes the required deterministic polarity switching, which is typically only achieved with large magnetic fields or strong dynamic driving. Here, we show that the interaction between the vortex core and manufactured nanoscale defects in the magnetic material lowers the required driving strength for core polarity reversal by more than an order of magnitude. We excite vortex dynamics in thin permalloy disks, and map the twodimensional (2D) vortex core trajectory using 3D time-resolved Kerr microscopy. In pristine samples, we observe normal gyrotropic motion of the vortex core. After laser-induced generation of defects, however, we observe repeated vortex core reversal at much-reduced driving strength. Micromagnetic simulations reveal how local reduction of exchange coupling and saturation magnetization can create vortex core reversal sites for deterministic vortex core switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Precise ${dd}$ excitations and commensurate intersite Coulomb interactions in the dissimilar cuprates YBa 2 Cu 3 O 7–y and La 2–x Sr x CuO 4

Using high-resolution extreme ultraviolet resonant inelastic X-ray scattering (EUVRIXS) spectroscopy at Cu M-edge, we observed the doping dependent spectral shifts of inter-orbital (${dd}$) excitations of YBa 2 Cu 3 O 7-y and La 2-x Sr x CuO 4 . With increasing hole doping level from undoped to optimally doped superconducting compositions, the leading edge of ${dd}$ excitations is found to shift towards lower energy loss in a roughly linear trend that is irrespective to the cuprate species. The magnitude of energy shift can be explained by including a 0.15 eV Coulomb attraction between Cu 3d(x 2 -y 2 ) electrons and the doped holes on the surrounding oxygens in the atomic multiplet calculations. Finally, the consistent energy shift between distinct cuprate families suggests that this inter-site Coulomb interaction energy scale is relatively material-independent, and provides an important reference point for understanding charge density wave phenomena in the cuprate phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Mediation of Colloidal Encounter Dynamics by Surface Roughness

Rigorous understanding on the self-assembly of colloidal nanocrystals is crucial to develop tailored nanostructured materials for energy storage, sensing, and optical fields. Despite extensive studies on the self-assembly, a mechanistic understanding of self-assembly under an external field still remains an ongoing challenge. Here, in this work, we used optical tweezers that impose an external attractive force field, resulting in the self-assembly of alpha-phase sodium yttrium fluoride nanocrystals. The dynamic force that is strongly dependent on the surface roughness of the nanocrystals is shown to be a decisive factor for a direct contact between the nanocrystals, manifested by the roughness-dependent hydrodynamic resistivity and Langevin dynamic simulations. Our study provides direct evidence that the role of dynamics is equally important in understanding the self-assembly, which has been rarely observed in the self-assembly in contrast with many studies on the equilibrium forces. These results may have further impact in other fields, such as having explanatory power for the probability of nonclassical crystal growth or the structure of viral spike proteins that affect the probability of viruses binding with cells.

Felsted, Robert G. [Univ. of Washington, Seattle, ↗

NASA NTRS1992

Composites of low-density trialuminides: Particulate and long fiber reinforcements

An examination of the ternary L1(sub 2) trialuminides, Al66Ti25Mn9, Al67Ti25Cr8, and Al22Ti8Fe3 in compression, bending, and tension revealed that none of these compounds exhibited a desirable balance of strength, ductility, and oxidation resistance. Subsequently, specific quaternary and quinary compositions were cast, homogenized, and isothermally forged. Both, the monolithic material and its particulate reinforced counterparts were examined in compression, three point bend, and tension as a function of temperature, and at high temperatures as a function of strain rate. An alternate approach that was examined in this program to enhance the low temperature damage tolerance of these materials was to incorporate long refractory metal wires in the matrix. In summary, it appears that of the various matrix compositions examined, ternary Al66Ti25Mn9 exhibits the best balance in strength, ductility, and oxidation resistance. Although the idea of refractory metal wire reinforcement is an attractive one, a successful combination remains to be identified.

Kumar, K. S.↗

NASA NTRS1999

Novel Electric Nucleation Technique for Growing Large Single Crystal in Space

We present, herein, an electrical model for growing crystals without a seed which might not be free of defects and thereby still hinder the growth of a perfect crystal in space. The system is designed to confine nucleation to a single site automatically in an under saturated solution to avoid multiple nucleation. The technique is based on the effect of electrostriction, which is the tendency of a material to become more compressed in the presence of an electric field. The system is designed to create an electrical potential well between two hyperboloid electrodes with applied voltage at low frequency. The induced potential well between the electrodes oscillates at low frequency and attracts the solute and condenses it into the region of maximum field intensity. The alternating voltage prevents molecules with intrinsic charge from being attracted to the electrodes. The continuous presence of the electric field during the duration of the experiment, provides a continuous migration of the molecules toward the trapping site. This will eliminate the creation of a depletion region around the nucleation center and will enhance the crystal growth rate. Aside from the above mentioned advantages, the system is compact, safe to operate, and inexpensive to build.

Abdeldayem, Hossin↗

DOE OSTI2020

PILOT PLANT EVALUATIONS OF RARE EARTH ELEMENT RECOVERY AND CONCENTRATION FROM PRE-COMBUSTION BITUMINOUS COAL SOURCES

Rare earths and other critical elements are commonly associated with coal-based sources and sometimes at concentrations that may be attractive for recovery as a byproduct of coal production. The results obtained from laboratory research performed during the past five years have led to the design, construction and testing of a pilot plant that recovered rare earth elements from several bituminous coal-based materials including coarse refuse as well as solutions from a small heap leach and acid mine drainage. From this initial design, rare earth oxide (REO) concentrates having a purity greater than 90% have been produced using solvent extraction as the primary means of concentration. Following cost reduction and process intensification efforts, the circuit was revised to include feed calcination and several selective precipitation stages as a substitute for the original direct leach-solvent extraction circuit. Pilot test results revealed that the modified circuit was ideal for treating the relatively low-grade feedstocks and provided similar final REO purities at a significantly lower cost. This communication will present the flowsheets evaluated in the pilot plant along with technical and economic analyses for each circuit.

Coal↗

NASA NTRS1994

Bench-scale synthesis of nanoscale materials

A novel flow-through hydrothermal method used to synthesize nanoscale powders is introduced by Pacific Northwest Laboratory. The process, Rapid Thermal Decomposition of precursors in Solution (RTDS), uniquely combines high-pressure and high-temperature conditions to rapidly form nanoscale particles. The RTDS process was initially demonstrated on a laboratory scale and was subsequently scaled up to accommodate production rates attractive to industry. The process is able to produce a wide variety of metal oxides and oxyhydroxides. The powders are characterized by scanning and transmission electron microscopic methods, surface-area measurements, and x-ray diffraction. Typical crystallite sizes are less than 20 nanometers, with BET surface areas ranging from 100 to 400 sq m/g. A description of the RTDS process is presented along with powder characterization results. In addition, data on the sintering of nanoscale ZrO2 produced by RTDS are included.

Buehler, M. F.↗

NASA NTRS2005

Challenges in Predicting Planetary Granular Mechanics

Through the course of human history, our needs in agriculture, habitat construction, and resource extraction have driven us to gain more experience working with the granular materials of planet Earth than with any other type of substance in nature, with the possible exception being water. Furthermore, throughout the past two centuries we have seen a dramatic and ever growing interest among scientists and engineers to understand and predict both its static and rheological properties. Ironically, however, despite this wealth of experience we still do not have a fundamental understanding of the complex physical phenomena that emerge even as just ordinary sand is shaken, squeezed or poured. As humanity is now reaching outward through the solar system, not only robotic ally but also with our immediate human presence, the need to understand and predict granular mechanics has taken on a new dimension. We must learn to farm, build and mine the regoliths of other planets where the environmental conditions are different than on Earth, and we are rapidly discovering that the effects of these environmental conditions are not trivial. Some of the relevant environmental features include the regolith formation processes throughout a planet's geologic and hydrologic history, the unknown mixtures of volatiles residing within the soil, the relative strength of gravitation, ~d the atm9spheric pressure and its seasonal variations. The need to work with soils outside our terrestrial experience base provides us with both a challenge and an opportunity. The challenge is to learn how to extrapolate our experience into these new planetary conditions, enabling the engineering decisions that are needed right now as we take the next few steps in solar system exploration. The opportunity is to use these new planetary environments as laboratories that will help us to see granular mechanics in new ways, to challenge our assumptions, and to help us finally unravel the elusive physics that lie behind complex granular phenomena. Toward these goals, a workshop was held recently at NASA's John F. Kennedy Space Center, attracting over a hundred scientists and engineers from around the world and from a broad crosssection of scientific and engineering disciplines. This talk will provide an out-briefing from that workshop, communicating some of its early findings in regard to lunar and Martian exploration: (1) the requirements for working with granular materials, (2) the challenges that granular materials will pose, (3) the environmental conditions that affect granular mechanics, (4) instruments and measurements that are needed on the Moon and Mars to support granular material research, and (5) some of the possible research avenues that should be pursued.

Metzger, Philip T.↗

DOE OSTI2024

K–Co–Mo–S x chalcogel: high-capacity removal of Pb 2+ and Ag + and the underlying mechanisms

Chalcogenide-based aerogels, known as chalcogels, represent a novel class of nanoparticle-based porous amorphous materials characterized by high surface polarizability and Lewis base properties, exhibiting promising applications in clean energy and separation science. This work presents a K–Co–Mo–S x (KCMS) chalcogel as a highly efficient sorbent for heavy metal ions and details its sorption mechanisms. Its incoherent structure comprises Mo 2 V (S 2 ) 6 and Mo 3 IV S(S 6 ) 2 anion-like clusters with four- and six-coordinated Co–S polyhedra, forming a Co–Mo–S covalent network that hosts K + ions through electrostatic attraction. The interactions of KCMS with heavy metal ions, particularly Pb 2+ and Ag + , reveal that KCMS is exceptionally effective in removing these ions from ppm concentrations down to trace levels (≤5 ppb). KCMS rapidly removes Ag + (≈81.7%) and Pb 2+ (≈99.5%) within five minutes, achieving >99.9% removal within an hour, with a distribution constant K d ≥10 8 mL g -1 . KCMS exhibits an impressive removal capacity of 1378 mg g -1 for Ag + and 1146 mg g -1 for Pb 2+ , establishing it as one of the most effective materials known to date for heavy metal removal. This material is also effective for the removal of Ag + and Pb 2+ along with Hg 2+ , Ni 2+ , Cu 2+ , and Cd 2+ from various water sources even in the presence of highly concentrated and chemically diverse cations, anions, and organic species. Analysis of the post-interacted KCMS by synchrotron X-ray pair distribution function (PDF), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDS) revealed that the sorption of Pb 2+ , Ag + , and Hg 2+ mainly occurs by the exchange of K + and Co 2+ . Despite being amorphous, this material exhibits unprecedented ion-exchange mechanisms both for the ionically and covalently bound K + and Co 2+ , respectively. In conclusion, this discovery advances our knowledge of amorphous gels and guides material synthesis principles for the highly selective and efficient removal of heavy metal ions from water.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2003

Novel High Efficient Organic Photovoltaic Materials

Solar energy is a renewable, nonpolluting, and most abundant energy source for human exploration of a remote site or outer space. In order to generate appreciable electrical power in space or on the earth, it is necessary to collect sunlight from large areas and with high efficiency due to the low density of sunlight. Future organic or polymer (plastic) solar cells appear very attractive due to their unique features such as light weight, flexible shape, tunability of energy band-gaps via versatile molecular or supramolecular design, synthesis, processing and device fabrication schemes, and much lower cost on large scale industrial production. It has been predicted that supramolecular and nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks may facilitate the charge carrier separation and migration due to improved electronic ultrastructure and morphology in comparison to polymer composite system. This presentation will describe our recent progress in the design, synthesis and characterization of a novel block copolymer system containing donor and acceptor blocks covalently attached. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene (RO-PPV), the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene (SF-PPV). The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block has a strong PL emission at around 560 nm, and acceptor block has a strong PL emission at around 520 nm, the PL emissions of final block copolymers are severely quenched. This verifies the expected electron transfer and charge separation due to interfaces of donor and acceptor nano phase separated blocks. The system therefore has potential for variety light harvesting applications, including high efficient photovoltaic applications.

Sun, Sam↗

DOE OSTI2021

Composition-Dependent Photoluminescence Properties and Anti-Counterfeiting Applications of A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I)

Copper(I) halides are emerging as attractive alternatives to lead halide perovskites for optical and electronic applications. However, blue-emitting all-inorganic copper(I) halides suffer from poor stability and lack of tunability of their photoluminescence (PL) properties. In this work, the preparation of silver(I) halides A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I) through solid-state synthesis is reported. In contrast to the Cu(I) analogs, A 2 AgX 3 are broad-band emitters sensitive to A and X site substitutions. First-principle calculations show that defect-bound excitons are responsible for the observed main PL peaks in Rb 2 AgX 3 and that self-trapped excitons (STEs) contribute to a minor PL peak in Rb 2 AgBr 3 . This is in sharp contrast to Rb 2 CuX 3 , in which the PL is dominated by the emission by STEs. Moreover, the replacement of Cu(I) with Ag(I) in A 2 AgX 3 significantly improves photostability and stability in the air under ambient conditions, which enables their consideration for practical applications. Thus, luminescent inks based on A 2 AgX 3 are prepared and successfully used in anti-counterfeiting applications. The excellent light emission properties, significantly improved stability, simple preparation method, and tunable light emission properties demonstrated by A 2 AgX 3 suggest that silver(I) halides may be attractive alternatives to toxic lead halide perovskites and unstable copper(I) halides for optical applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Proton-Mediated and Ir-Catalyzed Iron/Iron-Oxide Redox Kinetics for Enhanced Rechargeability and Durability of Solid Oxide Iron–Air Battery

Long duration energy storage (LDES) is an economically attractive approach to accelerating clean renewable energy deployment. The newly emerged solid oxide iron–air battery (SOIAB) is intrinsically suited for LDES applications due to its excellent low-rate performance (high-capacity with high efficiency) and use of low-cost and sustainable materials. However, rechargeability and durability of SOIAB are critically limited by the slow kinetics in iron/iron-oxide redox couples. Here the use of combined proton-conducting BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3 (BZC4YYb) and reduction-promoting catalyst Ir to address the kinetic issues, is reported. It is shown that, benefiting from the facilitated H + diffusion and boosted FeOx-reduction kinetics, the battery operated under 550 °C, 50% Fe-utilization and 0.2 C, exhibits a discharge specific energy density of 601.9 Wh kg –1 -Fe with a round-trip efficiency (RTE) of 82.9% for 250 h of a cycle duration of 2.5 h. Under 500 °C, 50% Fe-utilization and 0.2 C, the same battery exhibits 520 Wh kg –1 -Fe discharge energy density with an RTE of 61.8% for 500 h. This level of energy storage performance promises that SOIAB is a strong candidate for LDES applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Exciton Transfer Between Extended Electronic States in Conjugated Inter-Polyelectrolyte Complexes

Artificial light harvesting, a process that involves converting sunlight into chemical potential energy, is considered to be a promising part of the overall solution to address urgent global energy challenges. Conjugated polyelectrolyte complexes (CPECs) are particularly attractive for this purpose due to their extended electronic states, tunable assembly thermodynamics, and sensitivity to their local environment. Importantly, ionically assembled complexes of conjugated polyelectrolytes can act as efficient donor-acceptor pairs for electronic energy transfer (EET). However, to be of use in material applications, we must understand how modifying the chemical structure of the CPE backbone alters the EET rate beyond spectral overlap considerations. In this report we investigate the dependence of the EET efficiency and rate on the electronic structure and excitonic wave function of the CPE backbone. To do so, we synthesized a series of alternating copolymers where the electronic states are systematically altered by introducing comonomers with electron withdrawing and electron-rich character while keeping the linear ionic charge density nearly fixed. We find evidence that the excitonic coupling may be significantly affected by the exciton delocalization radius, in accordance with analytical models based on the line-dipole approximation and quantum chemistry calculations. Our results imply that care should be taken when selecting CPE components for optimal CPEC EET. These results have implications for using CPECs as key components in water-based light-harvesting materials, either as standalone assemblies or as adsorbates on nanoparticles and thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗