Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Density of U-10wt%Zr Materials

There is very little information published concerning the density of U-Zr alloys (uranium-rich). The following information presents a portion of what has been published, as well as additional information recorded by Argonne National Laboratory-West while casting U-10Zr fuel for use in the Experimental Breeder Reactor-II. The fuel was injection-cast into ZrO 2 -coated quartz molds, quenching the molten fuel alloy very quickly. The fuel was produced to specifications in which mass/weight, diameter, and length of the fuel slugs were all controlled. Density was not controlled.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Casting Development Report for EFF-W Casting Furnace

The Experimental Fuels Facility (EFF) Casting System, which is configured for gravity casting into a permanent mold, was installed to cast billets made up of uranium, uranium alloys, copper and copper alloys, as well as other geometries in support of the TerraPower project. This document describes casting development using.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tailoring Electron-Photon Interaction in Active 3D Photonic-Crystal Architectures

A photonic-crystal is an artificially engineered periodic structure. It is often referred to as an “optical semiconductor” due to its unparallel capability to mold the flow-of-light on-chip, not only in plane (the x-y plane) but also along the third direction. Examples of the unique 3D control-of-light include diffraction less light-guiding, slow light, super prism, negative refraction and high-Q cavity. A new research frontier exists in which the concept of complete control-of-light is utilized to facilitate and maximize electron-photon interaction. The close proximity and strong interaction between a photonic-crystal and an electronic medium can lead to new optoelectronic properties not easily attainable by other means. In this program, we will study this new class of active photonic-crystal and to achieve improved device performances and basic discoveries. Under this program, the PI has made significant progress in the following areas: (i) We have maximized light trapping and absorption by a 3D simple-cubic photonic-crystal; By advancing the concept of simple-cubic symmetry design, we have successfully designed a super thin-film architecture for high efficiency, crystalline silicon solar cells; Most recently, we have provided a theoretical roadmap for thin-film silicon solar cells with 30% power conversion efficiency. (ii) In the modification of thermal radiation area, we have observed quasi- optical coherence in thermal radiation from a 3D metallic photonic-crystal; Furthermore, we have made a direct confirmation of super-Planckian radiation a tungsten photonic-crystal; (iii) We have made simultaneous observation of a large light diffraction-efficiency, 82%, and efficiency enhancement by a volume hologram material (PQ-PMMA) for solar concentration application. (iv) we have also successfully fabricated a 3D metal-oxide photonic crystal. We demonstrated that this TiO 2 photonic crystal can achieve an effectively infinite optical path-length created using a simple-cubic photonic crystal for extreme light trapping.

36 MATERIALS SCIENCE↗

Evaluation of High Temperature Plastics as a Ceramic Replacement

This report describes the 2015-2017 fiscal year research efforts to evaluate high temperature plastics as replacement materials for ceramics in electrical contact assemblies. The main objective of this work was to assess the feasibility of replacing existing high-price ceramic inserts with a polymeric material. Current ceramic parts are expensive due to machining costs and can suffer brittle failure. Therefore, replacing the ceramic with a more cost-effective material — in this case a plastic — is highly desirable. Not only are plastics easier to process, but they can also eliminate final tooling and are less brittle than ceramics. This effort used a three-phase approach: selection of appropriate materials determined by a comprehensive literature review, performance of an initial thermal stability screening, understanding of aging behavior under normal and off-normal conditions, and evaluation of performance at elevated temperatures. Two polymers were determined to meet the desired criteria: polybenzimidazole, and Vespel® SP-1 polyimide. Polymer derived ceramics may also be useful but will require further development of molding capabilities that were beyond the scope of this program.

36 MATERIALS SCIENCE↗

A Detailed Wind Turbine Blade Cost Model

This technical report describes a detailed blade cost model for wind turbine blades in the range of 30 to 100 meters in length. The model estimates the bill of materials, the number of labor hours and the cycle time, and the costs related to direct labor, overhead, buildings, tooling, equipment, maintenance, and capital. The model applies to multimegawatt wind turbine blades manufactured via vacuum-assisted resin transfer molding, which is the most commonly adopted manufacturing method for modern wind turbine blades. The model is implemented both in a large Excel file and in Python. The latter is freely available in the repository of the Wind-Plant Integrated System Design and Engineering Model (WISDEM[R]) github.com/WISDEM. WISDEM is a multidisciplinary analysis and optimization design framework developed at the National Renewable Energy Laboratory. This blade cost model represents a valuable tool to run design optimization studies for wind turbines. In this report, the model is first presented with its approach and assumptions and then computes the costs of three blades, namely the 33-meter-long Wind Partnership for Advanced Component Technologies (WindPACT) study blade, the 63-meter-long International Energy Agency (IEA) Wind Task 37 land-based reference wind turbine blade, and the 100-meter-long SNL-100-03 blade developed at Sandia National Laboratories.

17 WIND ENERGY↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

36 MATERIALS SCIENCE↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems (Final Report)

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all-ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

03 NATURAL GAS↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems (Final Scientific Report Updated)

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all-ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

36 MATERIALS SCIENCE↗

Bubble-Size Evolution during Polyurethane Foam Expansion

We are developing computational models to elucidate the expansion and dynamic filling process of a polyurethane (PMDI) foam used to encapsulate electronic components or to produce lightweight structural parts. The polyurethane of interest is a chemically blown foam, where carbon dioxide is produced via the reaction of water, a blowing agent, and isocyanate. Here, we take a careful look at the evolution of the bubble sizes during blowing. This information will help the development of subgrid models to predict bubble formation, growth, coalescence and collapse, drainage, and, hence, eventually the development of engineering models to predict foam expansion into a mold. Close-up views of bubbles at a transparent wall of a narrow, temperature-controlled channel are recorded during the foaming reaction and analyzed with image processing. Because these bubbles are pressed against the wall, the bubble sizes in the last frames after the expansion has stopped are compared to scanning electron microscope (SEM) images of the interior of some of the cured samples to determine if the presence of the wall significantly changes the bubble sizes. In addition, diffusing wave spectroscopy (DWS) is used to determine the average bubble sizes across the width of a similar channel as the bubbles change with time. DWS also gives information about microstructural changes as bubbles rearrange upon bubble collapse or coalescence. In this paper we conclude qualitatively that the bubble size distribution is heavily dependent on the formulation of foam being tested, temperature, the height in the foam bar, the proximity to a wall, and the degree of over-packing.

36 MATERIALS SCIENCE↗

JEDEC Tray Flexures for High-Consequence Electronics

JEDEC matrix trays are an industry standard for the safe handling, transport, and storage of electronics. Manufacturing tolerances of the trays (typical for injection-molded components) forces the creation of an envelope around components rather than a secure interface to prevent the trays themselves from damaging the electronics during use. However, this allows relative motion between the components, another potential damage source. This paper covers the design of tray features (flexures) than enable intentional, tuned contact preload to prevent relative motion, maximizing component safety while keeping the JEDEC tray form-factor. The target preload is balanced between gravity and shipment forces that could be experience during adverse handling or transport to prevent loss of contact or slip and keeping the load itself low enough to prevent component damage. Typical features/dimensions for JECEC trays were employed to maximize utility and minimize tray fabrication difficulty. The design also increases usability and component safety by making the chips visible while still sandwiched between trays. The point design described here exemplifies a simple, easy-to-manufacture tray-matrix flexure that significantly improves the security of supported components

42 ENGINEERING↗

Development and Integration of Predictive Models for Manufacturing and Structural Performance of Carbon Fiber Composites in Automotive Applications (Final Report)

The goal of this project is to develop integrated, state-of-the-art, computational modeling tools based on an integrated computational materials engineering (ICME) methodology that are critically needed to enable structural carbon fiber (CF) applications in automobiles. These tools are designed to predict the manufacturing and structural performance of CF composites, including stochastic effects. During the first phase of the project, the manufacturing and structural performance tools, including a stochastic driver, were developed, calibrated, and validated against coupon and component level test results. For this project, from the manufacturing side, the development efforts were focused on high-pressure resin transfer molding (HP-RTM), a potentially game-changing manufacturing technology that is capable of reaching the 3-5-minute cycle time that is necessary for volume manufacturing of composites. On the structural performance side, the crashworthiness of CF structures was studied. Accordingly, computational tools were developed and validated. The resulting differences between the numerical predictions and the experimental results in the first phase of the project were required to be less than 15%. During the second phase of the project, the manufacturing and performance tools were integrated by mapping the manufacturing outcomes (e.g., fiber angles, residual stresses, degree of cure, and defects) into the structural models. Also, using the tools developed in this project, an automotive assembly currently manufactured in steel (2016 GM Malibu) was redesigned to be manufactured using advanced CF composites with the objective of comparing the performance of the CF assembly with the developed ICME model predictions. The weight, performance and cost of the CF assembly were compared with the baseline steel assembly as well. The CF underbody design was shown to be 30% lighter than the corresponding steel design. The CF underbody assembly withstood the side pole impact with less than half the intrusion for the steel assembly. Excellent correlations within 10% for both peak impact load and intrusion were observed between the numerical predictions and experimental results. Based on the cost models developed in the project, the cost increase per Kg saved was determined to be $22. The project team has prepared a total of 28 publications in various journals and conferences and broadly communicated the project results for the benefit of the composite industry. The project team has also prepared a total of 10 patent applications that were submitted to the US Patent and Trademark office.

36 MATERIALS SCIENCE↗

Manufacturing of low-background copper electrical components for rare-event detection. Final report

This SBIR Phase I project developed the manufacturing capability for the production of ultra-low-background copper and lead for use in electronic interconnects and support architecture. Copper is an attractive electronic and support material because of its favorable conductivity and mechanical properties. Fortuitously, the material can also be electroplated with high radiopurity, particularly if the electroforming is performed in shielded, buried facilities within which the cosmogenic background is minimized. The machining of the electroformed copper into wires, feedthroughs, and support hardware can potentially introduce impurities through the shop environment or through the dies used in wire-drawing and part formation. During Phase I, we demonstrated an alternative low-cost solution-based approach in which copper nanoparticles are colloidally-grown and self-assembled into solids that can serve as thermal structures- such as cold-fingers, mechanical structures- such as the inner shielding lining, and electronic devices. We demonstrated ultrastrong, high-conductivity free-standing copper conductors during Phase I suitable for battery electrodes, interconnects, and cabling, all components that enable next-generation flexible electronics. In nanoparticle form, copper forms in a crystalline lattice with very low impurity content, but its self-assembly is facilitated by organic capping ligands that can serve as impurity sources. Upon the formation of a colloidal solid, the copper particles can be fused and the organic components evaporated through vacuum annealing. The study of ultra-pure copper was expanded during Phase I to include nanostructured lead, which is an important radiation-shielding material. By growing lead particles in a water-based solution the resulting solution can be poured into the desired form-factor mold, within which it will self-assemble and harden upon evaporation of the water and any organics. The effort during Phase II is designed to complete the development of the manufacturing process and to use that process to deliver high radio-purity copper and lead components to the rare-event detection community so that the noise-floor contribution from the surrounding materials is substantially eliminated.

36 MATERIALS SCIENCE↗

HPC4Mfg with Carbon Inc.

Continuous Liquid Interface Production (CLIP) is poised to bring additive manufacturing to multiple American manufacturing sectors owing to its unique combination of rapid print speeds and material options that resemble injection molding thermoplastics. In spite of these benefits, CLIP is still a maturing process. To improve our understanding and control of the process, this project developed a multi-physics computational model that encompasses the coupled chemical-physical processes of photopolymerization and fluid flow to predict part outcomes. A physically predictive model can enable rapid optimization of CLIP and reduce the current cycle time and waste associated with optimization by four-fold. Ultimately, this effort will help open the U.S. $400B plastic manufacturing industry to the key benefits of additive manufacturing, namely mass customization, unlimited design space, and a cost- and energy-effective path to mainstream manufacturing. In the course of the project we produced a model which coupled fluid-flow, species transport, and photochemistry to model the Carbon CLIP process. As the development proceeded, we validated the code against theory and experiments. The resulting code was transferred to Carbon, and we expect it to be a useful part of their modeling capability. Future work includes improvements to the fluid solver’s robustness and performance, along with the addition of additional physics models.

42 ENGINEERING↗

Fully Recyclable Advanced Composites with Reduced Cure Times for Improved Manufacturing Efficiency

At Cyclotron Road, the participant team from Mallinda focused its research efforts on developing its Polyimine chemistry for commercial applications. The value-differentiating characteristics of the technology are predicated on the chemical reversibility of the system which opens the door for a number of industrial applications. In short, the company’s technology is a highly crosslinked thermoset polymer network that can exchange covalent bonds within the polymer matrix when the polymer is heated to the glass transition temperature of the material. This leads to a resin system that can alternate between rigid and semi-rigid states; allowing for compression molding, and surface welding of thermosetting composite materials made with polyimine polymers. This research project worked towards improving the thermal properties of its resin from 80 °C to over 260 °C. The improved properties of Mallinda’s resin unlocks development potential within the automotive and aerospace markets where advance composite materials require stringent performance requirements and elevated operating temperatures.

36 MATERIALS SCIENCE↗

Swab Tensile Testing Results [Slides]

HP PA11 material swabs predominantly broke at the joint between the head and the neck, although there was significant variation in the break locations. HP PA12, Injection Molded, and FormLabs (Surgical Guide V1 Resin) material swabs predominately broke in the neck region.

36 MATERIALS SCIENCE↗

Ultra-Light Hybrid Composite Door Design, Manufacturing and Demonstration

New Corporate Average Fuel Economy regulations require improved fuel efficiency of the future vehicle fleet. Weight reduction is key to achieving these targets. Replacing metallic body and chassis components with carbon fiber-reinforced composites offers the most weight reduction potential at up to 70%. Introduction of the BMW i3 and i8 in 2014 required mass production processes to meet 20,000+ units per year. Preforming with High Pressure Resin Transfer Molding has been implemented and meets rate, cost, and performance requirements. We will advance these technologies to develop an ultra-light driver’s side door for the vehicle with production rates of 40,000 units annually per plant in Detroit, Michigan. This project sought to employ a comprehensive systems approach for designing, manufacturing, and demonstrating an ultra-light hybrid composite automotive door. Composite structural components are integrated with other functional systems to reduce part count and full-system weight by a minimum of 42.5%. The approach will be demonstrated on a driver’s- side front door and will consider all fit, functional, safety, and cost requirements. These concepts will be evaluated using structural and crash simulations and linked to a manufacturing feasibility study, resulting in producible designs of an integrated door system. A cost model will evaluate part of the cost for the various designs and will ensure the cost target of less than $5 per pound of weight saved is met. Hybrid composites consisting of carbon, glass, and metal components will be included in our trade-off studies to satisfy these cost and performance goals.

02 PETROLEUM↗

Utility of Big Area Additive Manufacturing for Part Production for Low-Head Hydropower (CRADA NFE-18-07280 Final Report)

ORNL worked with Cadens, LLC, to explore the use of additive manufacturing (AM) to produce low-cost parts for low-head hydropower systems. Cadens develops design optimization software that leverages the flexible, low-cost, high-strength benefits of AM and composite materials. Cadens also operates a micro-hydro lab to test AM components in controlled environments. Until now, Cadens’ tests have been limited to components of a size that they can cost-effectively manufacture using local commercial systems. This project provided an opportunity for Cadens to scale up their modular AM hydropower parts using the capabilities of Big Area Additive Manufacturing (BAAM). This project was a success and resulted in the design and fabrication of several end-use parts of a hydropower system, using a Big Area Additive Manufacturing (BAAM) system. The fabricated parts include a draft tube, thimble, runner housing mold, PVC end fitting and two PVC pipe supports. In addition, a runner system was fabricated using fused deposition modeling on a 3D Platform Workbench 400 Series System.

13 HYDRO ENERGY↗

Use of Commercial Off-The-Shelf Parts with 3-D Printed Connectors for Powered Air Purifying Respirators

This report presents preliminary results from the performance evaluation of a powered air purifying respirator (PAPR) assembled from commercial off-the-shelf (COTS) parts. Cost is a major limiting factor to PAPR adoption in healthcare. Moreover, the lack of standardization for filters and batteries poses a challenge for clinics and hospitals. Rapid prototyping of connectors, both mechanical and electrical, offers a possible solution in addressing both issues. We used 3-D printed connectors to assemble COTS components into a prototype PAPR. Large-scale manufacturing of 3-D printed connectors may be accomplished by converting the computer-aided design (CAD) drawings to pressure-injection molds.

42 ENGINEERING↗