Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Improving Peptide-Level Mass Spectrometry Analysis via Double Competition

A critical statistical task in the analysis of shotgun proteomics data involves controlling the false discovery rate (FDR) among the reported set of discoveries. This task is most commonly solved at the peptide-spectrum match (PSM) level by using target-decoy competition (TDC), in which a set of observed spectra are searched against a database containing a mixture of real (target) and decoy peptides. The PSM-level procedure can be adapted to the peptide level by selecting the top-scoring PSM per peptide prior to FDR estimation. Here, we investigate both PSM-level and peptide-level FDR control methods and come to two conclusions. First, although the TDC procedure is provably correct under certain assumptions, we observe that one of these assumptions - that incorrect PSMs are independent of one another - is frequently violated. Hence, we empirically demonstrate that TDC-based PSM-level FDR estimates can be liberally biased. Further, we propose that researchers avoid PSM-level results and instead focus on peptide-level analysis. Second, we investigate three ways to carry out peptide level TDC and show that the most common method ("PSM-only") offers the lowest statistical power in practice. The most powerful method, peptide-level FDR with PSM competition ("PSM-and-peptide"), carries out competition first at the PSM level and then again at the peptide level. In our experiments, this approach yields an average increase of 17% more discovered peptides at a1% FDR threshold relative to the PSM-only method.

59 BASIC BIOLOGICAL SCIENCES↗

Can radiomics features be reproducibly measured from CBCT images for patients with non-small cell lung cancer?

Purpose: Increasing evidence suggests radiomics features extracted from computed tomography (CT) images may be useful in prognostic models for patients with nonsmall cell lung cancer (NSCLC). This study was designed to determine whether such features can be reproducibly obtained from cone-beam CT (CBCT) images taken using medical Linac onboard-imaging systems in order to track them through treatment. Methods: Test-retest CBCT images of ten patients previously enrolled in a clinical trial were retrospectively obtained and used to determine the concordance correlation coefficient (CCC) for 68 different texture features. The volume dependence of each feature was also measured using the Spearman rank correlation coefficient. Features with a high reproducibility (CCC > 0.9) that were not due to volume dependence in the patient test-retest set were further examined for their sensitivity to differences in imaging protocol, level of scatter, and amount of motion by using two phantoms. The first phantom was a texture phantom composed of rectangular cartridges to represent different textures. Features were measured from two cartridges, shredded rubber and dense cork, in this study. The texture phantom was scanned with 19 different CBCT imagers to establish the features’ interscanner variability. The effect of scatter on these features was studied by surrounding the same texture phantom with scattering material (rice and solid water). The effect of respiratory motion on these features was studied using a dynamic-motion thoracic phantom and a specially designed tumor texture insert of the shredded rubber material. The differences between scans acquired with different Linacs and protocols, varying amounts of scatter, and with different levels of motion were compared to the mean intrapatient difference from the test-retest image set. Results: Of the original 68 features, 37 had a CCC >0.9 that was not due to volume dependence. When the Linac manufacturer and imaging protocol were kept consistent, 4–13 of these 37 features passed our criteria for reproducibility more than 50% of the time, depending on the manufacturer-protocol combination. Almost all of the features changed substantially when scatter material was added around the phantom. For the dense cork, 23 features passed in the thoracic scans and 11 features passed in the head scans when the differences between one and two layers of scatter were compared. Using the same test for the shredded rubber, five features passed the thoracic scans and eight features passed the head scans. Motion substantially impacted the reproducibility of the features. With 4 mm of motion, 12 features from the entire volume and 14 features from the center slice measurements were reproducible. With 6–8 mm of motion, three features (Laplacian of Gaussian filtered kurtosis, gray-level nonuniformity, and entropy), from the entire volume and seven features (coarseness, high gray-level run emphasis, gray-level nonuniformity, sum-average, information measure correlation, scaled mean, and entropy) from the center-slice measurements were considered reproducible. Conclusions: Some radiomics features are robust to the noise and poor image quality of CBCT images when the imaging protocol is consistent, relative changes in the features are used, and patients are limited to those with less than 1 cm of motion.

60 APPLIED LIFE SCIENCES↗

A combinatorial approach to synthetic transcription factor-promoter combinations for yeast strain engineering

Despite the need for inducible promoters in strain development efforts, the majority of engineering in Saccharomyces cerevisiae continues to rely on a few constitutively active or inducible promoters. Building on advances that use the modular nature of both transcription factors and promoter regions, we have built a library of hybrid promoters that are regulated by a synthetic transcription factor. The hybrid promoters consist of native S. cerevisiae promoters, in which the operator regions have been replaced with sequences that are recognized by the bacterial LexA DNA binding protein. Correspondingly, the synthetic transcription factor (TF) consists of the DNA binding domain of the LexA protein, fused with the human estrogen binding domain and the viral activator domain, VP16. The resulting system with a bacterial DNA binding domain avoids the transcription of native S. cerevisiae genes, and the hybrid promoters can be induced using estradiol, a compound with no detectable impact on S. cerevisiae physiology. Using combinations of one, two or three operator sequence repeats and a set of native S. cerevisiae promoters, we obtained a series of hybrid promoters that can be induced to different levels, using the same synthetic TF and a given estradiol. Finally, this set of promoters, in combination with our synthetic TF, has the potential to regulate numerous genes or pathways simultaneously, to multiple desired levels, in a single strain.

59 BASIC BIOLOGICAL SCIENCES↗

Spatial BCS-BEC crossover in superconducting $\textit{p–n}$ junctions

Here, we present a theory of superconducting $\textit{p–n}$ junctions. To this end, we consider a two band model of doped bulk semiconductors with attractive interactions between the charge carriers and derive the superconducting order parameter, the quasiparticle density of states, and the chemical potential as a function of the semiconductor gap $Δ_0$ and the doping level ε. We verify previous results for the quantum phase diagram for a system with constant density of states in the conduction and valence band, which show BCS-superconductor to Bose-Einstein-condensation (BEC) and BEC-to-insulator transitions as a function of doping level and the size of the band gap. Then, we extend this formalism to a density of states which is more realistic for 3D systems and derive the corresponding quantum phase diagram, where we find that a BEC phase can only exist for small band gaps $Δ_0 < Δ ^{\ast}_0$. For larger band gaps, we find rather a direct transition from an insulator to a BCS phase. Next, we apply this theory to study the properties of superconducting $\textit{p–n}$ junctions. We derive the spatial variation of the superconducting order parameter along the $\textit{p–n}$ junction. As the potential difference across the junction leads to energy band bending, we find a spatial crossover between a BCS and BEC condensate, as the density of charge carriers changes across the $\textit{p–n}$ junction. For the two-dimensional system, we find two possible regimes, when the bulk is in a BCS phase, a BCS-BEC-BCS junction with a single BEC layer in the space charge region, and a BCS-BEC-I-BEC-BCS junction with two layers of BEC condensates separated by an insulating layer. In three dimensions we find that there can also be a conventional BCS-I-BCS junction for semiconductors with band gaps exceeding $Δ^{\ast}_0$. Thus, we find that there can be BEC layers in the well controlled setting of doped semiconductors, where the doping level can be varied to change and control the thickness of BEC and insulator layers, making Bose-Einstein condensates thereby possibly accessible to experimental transport and optical studies in solid-state materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revisiting the Optical Spectrum of the Plutonyl Ion (PuO 2 ) 2+ in 1 M HClO 4

The analysis of the solution absorption spectrum of the plutonyl ion in an aqueous environment was given by Eisenstein and Pryce (E&P) in 1968. In 2011 a new spectrum was published of the (PuO 2 ) 2+ ion in 1 M HClO 4 . We have been provided with the original data of this spectrum and have found in the data a previously unreported low-lying transition at 7385 cm –1 which we have assigned as a magnetic dipole transition. We have fit most of the near-infrared and optical transitions with Gaussian fits and tabulated a new energy level list up to 22,000 cm –1 which mostly agrees with the data of E&P. We assumed a crystal field of D ∞h (only axial symmetry) and utilized the intensity calculations published for the isoelectronic (NpO 2 ) 1+ ion using a complete basis set for the 5f 2 problem including the Coulombic, spin–orbit as well as the crystal field Hamiltonian. Our results differ substantially from those of E&P. Subsequently, we used a truncated Hamiltonian to try to establish the effects of assuming the σ antibonding orbitals are at such high energies that we can ignore their contributions to the lower lying φ and δ orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-redshift cosmography

We constrain the parameters describing the kinematical state of the universe using a cosmographic approach, which is fundamental in that it requires a very minimal set of assumptions (namely to specify a metric) and does not rely on the dynamical equations for gravity. On the data side, we consider the most recent compilations of Supernovae and Gamma Ray Bursts catalogues. This allows to further extend the cosmographic fit up to z = 6.6, i.e. up to redshift for which one could start to resolve the low z degeneracy among competing cosmological models. In order to reliably control the cosmographic approach at high redshifts, we adopt the expansion in the improved parameter y = z/(1+z). This series has the great advantage to hold also for z > 1 and hence it is the appropriate tool for handling data including non-nearby distance indicators. We find that Gamma Ray Bursts, probing higher redshifts than Supernovae, have constraining power and do require (and statistically allow) a cosmographic expansion at higher order than Supernovae alone. Exploiting the set of data from Union and GRBs catalogues, we show (for the first time in a purely cosmographic approach parametrized by deceleration q{sub 0}, jerk j{sub 0}, snap s{sub 0}) a definitively negative deceleration parameter q{sub 0} up to the 3σ confidence level. We present also forecasts for realistic data sets that are likely to be obtained in the next few years.

79 ASTRONOMY AND ASTROPHYSICS↗

Treatment Outcomes in Non-Metastatic Prostate Cancer Patients With Ultra-High Prostate-Specific Antigen

Purpose: It is commonly believed that prostate cancer patients with very high prostate-specific antigen (PSA) levels are unlikely to benefit from definitive local treatment, and patients with very high PSA are often underrepresented in, or excluded from, randomized clinical trials. Consequently, little is known about their optimal treatment or prognosis. We performed a registry-based analysis of management and outcome in this population of patients. Methods and Materials: Our provincial Cancer Registry was used to identify all men who were diagnosed with prostate cancer from 1990 to 2001. A retrospective chart review provided information on stage, Gleason score, PSA at diagnosis, and treatment. In this study, ultra-high PSA was defined as PSA of {>=}50 ng/ml. For a more complete perspective, treatment outcomes of patients with PSA of 20 to 49.9 ng/ml were also studied. Results: Of the 8378 men diagnosed with prostate cancer during this period, 6,449 had no known nodal or distant metastatic disease. The median follow-up of this group was 67.2 months (range, 0-192 months). A total of 1534 patients had PSA of {>=}20 ng/ml. Among the 995 patients with PSA 20 to 49.9 ng/ml, 85 had radical prostatectomy (RP), and their 5- and 10-year cause-specific survivals (CSS) were 95% and 84%, respectively. The 497 patients treated with radiotherapy (RT) had 5- and 10-year CSS of 92% and 71%. For the 332 patients with PSA 50-99.9 ng/ml, RT was associated with 5- and 10-year CSS of 81% and 55%. For the 207 patients with PSA of {>=}100 ng/ml, RT was associated with 5- and 10-year CSS of 80% and 54%. Conclusions: This is the largest series in the world on non metastatic cancer patients with ultra-high PSA at diagnosis. Even in the setting of a very high presenting PSA level, prostatectomy and radiotherapy are often associated with prolonged survival.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Parton distributions with threshold resummation

We construct a set of parton distribution functions (PDFs) in which fixed-order NLO and NNLO calculations are supplemented with soft-gluon (threshold) resummation up to NLL and NNLL accuracy respectively, suitable for use in conjunction with any QCD calculation in which threshold resummation is included at the level of partonic cross sections. These resummed PDF sets, based on the NNPDF3.0 analysis, are extracted from deep-inelastic scattering, Drell-Yan, and top quark pair production data, for which resummed calculations can be consistently used. We find that, close to threshold, the inclusion of resummed PDFs can partially compensate the enhancement in resummed matrix elements, leading to resummed hadronic cross-sections closer to the fixed-order calculations. On the other hand, far from threshold, resummed PDFs reduce to their fixed-order counterparts. Our results demonstrate the need for a consistent use of resummed PDFs in resummed calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Aerosol Particle Mixing State and Composition at AMF3 (Interim Field Campaign Report)

The campaign is designed to support deployment of aerosol sampling equipment at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s third ARM Mobile Facility (AMF3) to enable both singe-particle and bulk characterization of the aerosol particles at the field site in Bankhead National Forest, northern Alabama. We are proposing to do this work as part of our proposal “Generalizing aerosol mixing state: synthesis from observations and connection to models,” which has the pre-proposal tracking number PRE-0000035878. The full proposal has Dr. Rachel O’Brien as the Principal Investigator (PI) and Dr. Andy Ault and Dr. Nicole Riemer as Co-PIs. We sought to deploy instruments in winter 2025 and summer 2025 to obtain samples in different seasons, but were delayed by AMF3 set-up and availability of students and PIs. We just completed our first deployment this summer (2025) and we are interested in obtaining samples during this upcoming fall and winter to see the seasonal trends in aerosol mixing state at the site. This will provide a comparison of the impact of biogenic emissions on the mixing state and the chemical composition of the aerosol particles. Overall, the proposed study will provide key information regarding the mixing state of aerosol particles at AMF3 with direct ties to impacts of the particles on cloud formation and light scattering/absorption. From our deployment that ended las week we have some visible observations from our samples. We are observing a regular amount of black carbon on stage 6 of our Micro-Orifice Uniform Deposit Impactor (MOUDI) and we have also observed some short, large increases in aerosol loading. We hope to continue observations of these two features to determine the sources/aging for the black carbon and the physical mixing state as well as the sources for the short (a few minutes) increases in the aerosol loading and determine if the source for these is dust or sea salt or another source. We are also interested in comparing the black carbon we see here to samples collected during the agriculture burns in January/February and in comparing the larger particles to bioaerosols in the spring. To obtain these comparisons, we will need to collect more samples in the other seasons. Finally, we have some size-resolved particle collectors that can be deployed at the same time as the tethered balloon launches. We have discussed with Swarup China about trying to get the timing to work in August and we are interested in coordinating again later, if possible. This will give us ground-level and vertical aerosol mixing state sample sets that will be very exciting to analyze.

54 ENVIRONMENTAL SCIENCES↗

Scaling Relations for Intercalation Induced Damage in Electrodes

Mechanical degradation, owing to intercalation induced stress and microcrack formation, is a key contributor to the electrode performance decay in lithium-ion batteries (LIBs). The stress generation and formation of microcracks are caused by the solid state diffusion of lithium in the active particles. Here in this work, scaling relations are constructed for diffusion induced damage in intercalation electrodes based on an extensive set of numerical experiments with a particle-level description of microcrack formation under disparate operating and cycling conditions, such as temperature, particle size, C-rate, and drive cycle. The microcrack formation and evolution in active particles is simulated based on a stochastic methodology. A reduced order scaling law is constructed based on an extensive set of data from the numerical experiments. The scaling relations include combinatorial constructs of concentration gradient, cumulative strain energy, and microcrack formation. Lastly, the reduced order relations are further employed to study the influence of mechanical degradation on cell performance and validated against the high order model for the case of damage evolution during variable current vehicle drive cycle profiles.

25 ENERGY STORAGE↗

Uncertainty propagation of p-boxes using sparse polynomial chaos expansions

In modern engineering, physical processes are modelled and analysed using advanced computer simulations, such as finite element models. Furthermore, concepts of reliability analysis and robust design are becoming popular, hence, making efficient quantification and propagation of uncertainties an important aspect. In this context, a typical workflow includes the characterization of the uncertainty in the input variables. In this paper, input variables are modelled by probability-boxes (p-boxes), accounting for both aleatory and epistemic uncertainty. The propagation of p-boxes leads to p-boxes of the output of the computational model. A two-level meta-modelling approach is proposed using non-intrusive sparse polynomial chaos expansions to surrogate the exact computational model and, hence, to facilitate the uncertainty quantification analysis. The capabilities of the proposed approach are illustrated through applications using a benchmark analytical function and two realistic engineering problem settings. They show that the proposed two-level approach allows for an accurate estimation of the statistics of the response quantity of interest using a small number of evaluations of the exact computational model. This is crucial in cases where the computational costs are dominated by the runs of high-fidelity computational models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessment of wind power scenario creation methods for stochastic power systems operations

Probabilistic scenarios of renewable energy production, such as wind, have been gaining popularity for use in stochastic variants of power systems operations scheduling problems, allowing for optimal decision-making under uncertainty. The quality of the scenarios has a direct impact on the value of the resulting decisions, but until now, methods for creating scenarios have not been compared under realistic operational conditions. Here, we compare the quality of scenario sets created using three different methods, based on a simulated re-enactment of stochastic day-ahead unit commitment and subsequent dispatch for a realistic test system. We create scenarios using a dataset of forecasted and actual wind power values, scaled to evaluate the effects of increasing wind penetration levels. We show that the choice of scenario set can significantly impact system operating cost, renewable energy use, and the ability of the system to meet demand. This result has implications for the ability of system operators to efficiently integrate renewable production into their day-ahead planning, highlighting the need for the use of performance-based assessments for scenario evaluation.

17 WIND ENERGY↗

REVISED AND EXTENDED ANALYSIS OF FIVE TIMES IONIZED XENON, Xe VI

A capillary discharge tube was used to record the Xe spectrum in the 400-5500 Å region. A set of 243 lines of the Xe VI spectrum was observed, and 146 of them were classified for the first time. For all known lines, we calculated the weighted oscillator strengths (gf) and weighted transition probabilities (gA) using the configuration interaction in a relativistic Hartree-Fock approach. The energy matrix was calculated using energy parameters adjusted to fit the experimental energy levels. Core polarization effects were taken into account in our calculations. Experimental energy values and calculated lifetimes are also presented for a set of 88 levels. From these levels, 32 were classified for the first time and 33 had their values revised. Our analysis of the 5s5p5d and 5s5p6s configurations was extended in order to clarify discrepancies among previous works.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi

This study systematically evaluates the effects of laser powder bed fusion additive manufacturing (L-PBF-AM) parameters (hatch spacing and laser power) on the thermomechanical behavior and microstructure of Ni 50.8 Ti 49.2 shape memory alloy. The samples were fabricated with hatch spacings from 40 to 240 µm and laser powers of 50 and 100 W at a constant scanning speed of 125 mm/s, resulting in parts with volumetric energy density levels from 55 to 666 J/mm 3 and two sets of linear energy densities of 0.4 and 0.8 J/mm. The results showed a reduced melt pool size and discontinuity of scan tracks with decreased laser power. Additionally, the porosity level was increased with larger hatch spacing and lower laser power. More notably, the transformation temperatures increased, and the critical stress, recoverable strain, and functional stability of samples improved with lower hatch spacing, where the recovery ratio of up to 90% was observed, regardless of the employed laser power. This study also discussed the relationship between the fabrication process and texture formation in the L-PBF-AM process. In conclusion, the advantage of L-PBF-AM was revealed in tailoring the microstructure from highly textured samples in [1 1 1] or [0 0 1] direction when hatch spacing lower than laser beam focused was employed, to the appearance of equiaxed solidification front with island grains and random orientations.

36 MATERIALS SCIENCE↗

Simplified Cartesian Basis Model for Intrapolyad Emission Intensities in the Bent-to-Linear Electronic Transition of Acetylene

The acetylene emission spectrum from the trans-bent electronically excited à state to the linear ground electronic $\tilde{X}$ state has attracted considerable attention because it grants Franck–Condon access to local bending vibrational levels of the $\tilde{X}$ state with large-amplitude motion along the acetylene ⇌ vinylidene isomerization coordinate. For emission from the ground vibrational level of the à state, there is a simplifying set of Franck–Condon propensity rules that gives rise to only one zero-order bright state per conserved vibrational polyad of the $\tilde{X}$ state. Unfortunately, when the upper level involves excitation in the highly admixed ungerade bending modes, ν 4 ' and ν 6 ' , the simplifying Franck–Condon propensity rule breaks down—as long as the usual polar basis (with v and l quantum numbers) is used to describe the degenerate bending vibrations of the $\tilde{X}$ state—and the intrapolyad intensities result from complicated interference patterns between many zero-order bright states. In this article, we show that, when the degenerate bending levels are instead treated in the Cartesian two-dimensional harmonic oscillator basis (with v x and v y quantum numbers), the propensity for only one zero-order bright state (in the Cartesian basis) is restored, and the intrapolyad intensities are simple to model, as long as corrections are made for anharmonic interactions. As a result of trans ⇌ cis isomerization in the à state, intrapolyad emission patterns from overtones of ν 4 ' and ν 6 ' evolve as quanta of trans bend (ν 3 ' ) are added, so the emission intensities are not only relevant to the ground-state acetylene ⇌ vinylidene isomerization, they are also a direct reporter of isomerization in the electronically excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Japan's Long-term Energy Demand and Supply Scenario to 2050 - Estimation for the Potential of Massive CO2 Mitigation

In this analysis, the authors projected Japan's energy demand/supply and energy-related CO{sub 2} emissions to 2050. Their analysis of various scenarios indicated that Japan's CO{sub 2} emissions in 2050 could be potentially reduced by 26-58% from the current level (FY 2005). These results suggest that Japan could set a CO{sub 2} emission reduction target for 2050 at between 30% and 60%. In order to reduce CO{sub 2} emissions by 60% in 2050 from the present level, Japan will have to strongly promote energy conservation at the same pace as an annual rate of 1.9% after the oil crises (to cut primary energy demand per GDP (TPES/GDP) in 2050 by 60% from 2005) and expand the share of non-fossil energy sources in total primary energy supply in 2050 to 50% (to reduce CO{sub 2} emissions per primary energy demand (CO{sub 2}/TPES) in 2050 by 40% from 2005). Concerning power generation mix in 2050, nuclear power will account for 60%, solar and other renewable energy sources for 20%, hydro power for 10% and fossil-fired generation for 10%, indicating substantial shift away from fossil fuel in electric power supply. Among the mitigation measures in the case of reducing CO{sub 2} emissions by 60% in 2050, energy conservation will make the greatest contribution to the emission reduction, being followed by solar power, nuclear power and other renewable energy sources. In order to realize this massive CO{sub 2} abatement, however, Japan will have to overcome technological and economic challenges including the large-scale deployment of nuclear power and renewable technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Overview of the interactive task in BioCreative V

Fully automated text mining (TM) systems promote efficient literature searching, retrieval, and review but are not sufficient to produce ready-to-consume curated documents. These systems are not meant to replace biocurators, but instead to assist them in one or more literature curation steps. To do so, the user interface is an important aspect that needs to be considered for tool adoption. The BioCreative Interactive task (IAT) is a track designed for exploring user-system interactions, promoting development of useful TM tools, and providing a communication channel between the biocuration and the TM communities. In BioCreative V, the IAT track followed a format similar to previous interactive tracks, where the utility and usability of TM tools, as well as the generation of use cases, have been the focal points. The proposed curation tasks are user-centric and formally evaluated by biocurators. In BioCreative V IAT, seven TM systems and 43 biocurators participated. Two levels of user participation were offered to broaden curator involvement and obtain more feedback on usability aspects. The full level participation involved training on the system, curation of a set of documents with and without TM assistance, tracking of time-on-task, and completion of a user survey. Here, the partial level participation was designed to focus on usability aspects of the interface and not the performance per se. In this case, biocurators navigated the system by performing pre-designed tasks and then were asked whether they were able to achieve the task and the level of difficulty in completing the task. In this manuscript, we describe the development of the interactive task, from planning to execution and discuss major findings for the systems tested.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

UV-frequency metrology on CO (a{sup 3}{Pi}): Isotope effects and sensitivity to a variation of the proton-to-electron mass ratio

UV-frequency metrology has been performed on the a{sup 3}{Pi} - X{sup 1}{Sigma}{sup +} (0,0) band of various isotopologues of CO using a frequency-quadrupled injection-seeded narrow-band pulsed titanium:sapphire laser referenced to a frequency comb laser. The band origin is determined with an accuracy of 5 MHz ({delta}{nu}/{nu}=3x10{sup -9}), while the energy differences between rotational levels in the a{sup 3}{Pi} state are determined with an accuracy of 500 kHz. From these measurements, in combination with previously published radio-frequency and microwave data, a set of molecular constants is obtained that describes the level structure of the a{sup 3}{Pi} state of {sup 12}C{sup 16}O and {sup 13}C{sup 16}O with improved accuracy. Transitions in the different isotopologues are well reproduced by scaling the molecular constants of {sup 12}C{sup 16}O via the common mass-scaling rules. Only the value of the band origin could not be scaled, indicative of a breakdown of the Born-Oppenheimer approximation. Our analysis confirms the extreme sensitivity of two-photon microwave transitions between nearly degenerate rotational levels of different {Omega} manifolds for probing a possible variation of the proton-to-electron mass ratio, {mu}=m{sub p}/m{sub e}, on a laboratory time scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗