Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Performance of the CMS high-level trigger during LHC Run 2

The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1 $\times$ 10$^{34}$ cm$^{-2}$s$^{-1}$, twice the initial design value, at $\sqrt{s}$ = 13 TeV. The CMS experiment records a subset of the collisions for further processing as part of its online selection of data for physics analyses, using a two-level trigger system: the Level-1 trigger, implemented in custom-designed electronics, and the high-level trigger, a streamlined version of the offline reconstruction software running on a large computer farm. This paper presents the performance of the CMS high-level trigger system during LHC Run 2 for physics objects, such as leptons, jets, and missing transverse momentum, which meet the broad needs of the CMS physics program and the challenge of the evolving LHC and detector conditions. Sophisticated algorithms that were originally used in offline reconstruction were deployed online. Highlights include a machine-learning b tagging algorithm and a reconstruction algorithm for tau leptons that decay hadronically.

high energy physics↗

Rapid recovery of invasive wild pig (Sus scrofa) populations following density reduction

Abstract Trapping is an effective strategy for control of invasive wild pig (Sus scrofa), but eradication of populations via trapping alone typically is impractical throughout much of the species’ introduced range. Consequently, recovery of wild pig populations to pre-trapping levels following control is a major impediment to success of long-term control. In this study, we conducted camera-trap surveys to monitor recovery of two wild pig populations immediately following density reductions achieved via trapping on two sites on the Savannah River Site, SC. We used spatial capture-recapture models to estimate wild pig density during seven 3 week periods spanning 12 months to: (1) determine the time required for populations to recover to pre-trapping levels; and (2) evaluate trends in population growth, density, and distribution during recovery. Recovery of both wild pig populations started immediately after trapping ceased, with populations reaching pre-trapping levels in 3 and 5 months. Threeweek population growth rates for each wild pig population during recovery averaged 1.28 (range = 1.11–1.39 on site 1) and 1.24 (range = 0.64–1.92 on site 2), which corresponded to a 345% and 132% increase in abundance (an increase of 141 and 126 individual wild pigs on site 1 and 2, respectively) of each population by the last survey period. Rapid recovery and growth beyond pre-trapping levels of wild pig populations likely were driven by residual wild pigs not removed by trapping and compensatory reproduction and immigration. Our study is one of the first to provide information on how quickly wild pig populations can recover following overall density reductions of 54–68% and indicates practitioners should be prepared to reinitiate trapping efforts in as little as 3 months to prevent recovery of wild pig populations following control.

Biodiversity & Conservation↗

Multi-stage heat release of multi-component fuels: Insights and implications for advanced engine operation

Multi-stage heat release (MSHR) is a unique phenomenon typically seen in lean/diluted and low- to intermediate-temperature combustion. Despite its relevance to advanced engine operation, the MSHR of multi-component fuels has barely been quantified. This study aims to characterize the MSHR of multi-component fuels in a rapid compression machine (RCM) at conditions representative of advanced combustion engines. New experimental data are first reported in the RCM at an equivalence ratio of 0.4, pressure of 60 bar and temperatures from 702 to 795 K for a research grade, multi-component gasoline surrogate, termed PACE-20. Here, experiments confirm the existence of MSHR for PACE-20 at all temperatures, and reveal the strong inhibiting effect of temperature on MSHR, where increasing temperature inhibits MSHR by suppressing first stage heat release and promoting second and third stage heat release. A detailed chemical kinetic model is also adopted to model the experiments, with good agreement observed. The response of MSHR characteristics to changes in different engine operating parameters (i.e., temperature, pressure, equivalence ratio and CO 2 dilution level) and fuel compositions (i.e., mole fraction of n-pentane, n-heptane, isooctane, cyclopentane, 1-hexene, ethanol and aromatics in PACE-20) is further evaluated via statistical analysis coupling quasi-random sampling, extensive computer experiments and high-dimensional model representation. The change in MSHR is characterized through 8 quantities of interest (QOIs), i.e., duration and extent of each heat release stage, and their standard deviations. The analysis highlights the dependence of the QOIs on the individual parameters as well as their interplays, with temperature exhibiting the strongest impact among all parameters. Furthermore, it is demonstrated that if MSHR is to be facilitated and combustion phasing is to be extended to enable engine operation at higher compression ratios, it is recommended to operate the engine at low intake temperatures, boosted intake pressures and high CO 2 dilutions (i.e., high EGR levels) with gasoline fuels containing more n-pentane and less aromatics.

42 ENGINEERING↗

Impact of external screening on the valence and core level photoelectron spectra of monolayer W⁢S 2

Transition metal dichalcogenides (TMDs) represent an emerging class of layered materials with applications in microelectronics, optoelectronics, photonics, and catalysis. The confinement of charge carriers within the highly anisotropic, quasi-two-dimensional geometry of one-layer (1L) TMDs leads to reduced, variable dielectric screening, giving rise to a quasiparticle band gap that is highly susceptible to the surrounding dielectric environment. Here, exploiting the contrasting external dielectric environments of gold-supported and suspended 1L W⁢S 2 , we show how the electronic states of W⁢S 2 under the effective and ineffective screening environments align at a junction made within the same sheet of material. Photoelectron spectra point to the close alignment of the charge neutrality levels of W⁢S 2 in both environments, and the breakdown of rigid shifts between the valence states and core levels with the core levels shifting more than twice as much as the valence states. Furthermore, the effectively screened W⁢S 2 exhibits a valence state with the photoemission linewidth twice as large as the ineffectively screened suspended W⁢S 2 , presumably originated from the locally varying W⁢S 2 -Au distance and substrate disorders. Collectively, these findings provide key insights into the electronic behavior of W⁢S 2 and its photoemission process with the electronic states renormalized according to the external screening environments.

Dielectric properties↗

Quantifying the Contributions of Aerosol- and Snow-Produced ClNO 2 through Observations and 1D Modeling

Nitryl chloride (ClNO 2 ) is a radical reservoir that forms and accumulates in the nocturnal atmospheric boundary layer influenced by combustion emissions and chloride (e.g., sea salt and road salt). Upon sunrise, ClNO 2 rapidly photolyzes to generate highly reactive chlorine radicals (Cl • ) that affect the air quality by generating secondary air pollutants. Recent studies have shown road salt aerosols and saline snowpack to be sources of ClNO 2 in the wintertime urban environment; however, the quantitative contributions of each chloride source are not known. In this study, we examine the vertically resolved contributions of aerosol particles and saline snowpack as sources of ClNO 2 by using an observationally constrained snow–atmosphere coupled one-dimensional model applied to wintertime Kalamazoo, Michigan, U.S. Model simulations show that ClNO 2 emitted from urban snowpack can be vertically transported throughout the entire atmospheric boundary layer and can be a significant source of ClNO 2 , contributing up to ~60% of the ClNO 2 budget near the surface. Here, modeled snowpack ClNO 2 emission rates were 6 (±7) times higher than the observationally derived emission rates, suggesting that not all snow chloride is available for reaction. ClNO 2 production from both aerosol particles and snow emissions are required to best simulate the observed surface-level ClNO 2 . Using the traditional bulk parameterization for ClNO 2 produced from particles significantly overestimated ClNO 2 due to the assumption of having equivalent dinitrogen pentoxide (N 2 O 5 ) uptake and chloride availability for the entire particle population. In comparison, the chemically resolved surface area-based parameterization slightly underestimated the observations and had uncertainties deriving from ClNO 2 production from residential wood burning particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward a Robust Confirmation or Refutation of the Sterile-Neutrino Explanation of Short-Baseline Anomalies

The sterile neutrino interpretation of the LSND and MiniBooNE neutrino anomalies is currently being tested at three liquid argon detectors: MicroBooNE, SBND, and ICARUS. It has been argued that a degeneracy between 𝜈 𝜇 → 𝜈 𝑒 and 𝜈 𝑒 → 𝜈 𝑒 oscillations significantly degrades their sensitivity to sterile neutrinos. Through an independent study, we show two methods to eliminate this concern. First, we resolve this degeneracy by including external constraints on 𝜈𝑒 disappearance from the PROSPECT reactor experiment. Second, by properly analyzing the full three-dimensional parameter space, we demonstrate that the stronger-than-sensitivity exclusion from MicroBooNE alone already covers the entire 2⁢𝜎 preferred regions of MiniBooNE at the level of 2−3⁢𝜎. We show that upcoming searches at SBND and ICARUS can improve on this beyond the 4⁢𝜎 level, thereby providing a rigorous test of short-baseline anomalies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Demagnetization of Nd 2 Fe 14 B, Pr 2 Fe 14 B, and Sm 2 Co 17 Permanent Magnets in Spallation Irradiation Fields

Prompted by the need for radiation-resistant permanent magnets for insertion devices (IDs) of high-brilliance next-generation synchrotrons such as the National Synchrotron Light Source II, the demagnetization of Nd 2 Fe 14 B and Pr 2 Fe 14 B was studied after exposure to a mixed irradiating field. Degradation and damage of the permanent magnetic material by components of electromagnetic showers induced in magnets by intense high-energy electron beams will alter the magnetic field structure of the IDs. Plate-like Nd 2 Fe 14 B magnets were irradiated to 1.8 Grad dose and were evaluated against Pr 2 Fe 14 B magnets irradiated to a lower dose of 20 Mrad. In addition, annular Sm 2 Co 17 and Nd 2 Fe 14 B magnets integrated within a ferrofluidic feedthrough (FFFT) rotary seal were also irradiated to dose levels of 2 Grad for Sm 2 Co 17 and 20 Mrad for Nd 2 Fe 14 B. Post-irradiation measurements of the magnetic intensity revealed that severe demagnetization exceeding 85% occurs in Nd 2 Fe 14 B magnets after only 50 Mrad dose and over 87% for Pr 2 Fe 14 B after 10 Mrad dose. The annular-shaped Sm 2 Co 17 magnets of the FFFTs were almost insensitive to irradiation up to a dose of 2 Grad. Annular-shaped Nd 2 Fe 14 B magnets also showed resistance to demagnetization, a direct consequence of the annular shape which is characterized by the removal of the stronger demagnetizing field present at the center of a disk-like magnet. As a result, the sensitivity of boron-based permanent magnets to neutron energy (thermal versus fast) was also assessed via specifically designed experiments and discussed.

43 PARTICLE ACCELERATORS↗

A land use and environmental impact analysis of the Norfolk-Portsmouth SMSA

The feasibility of using remote sensing techniques for land use and environmental assessment in the Norfolk-Portsmouth area is discussed. Data cover the use of high altitude aircraft and satellite remote sensing data for: (1) identifying various heirarchial levels of land use, (2) monitoring land use changes for repetitive basis, (3) assessing the impact of competing land uses, and (4) identifying areas of potential environmental deterioration. High altitude aircraft photographs (scale 1:120,000) acquired in 1959, 1970, and 1972, plus Earth Resources Technology Satellite (ERTS-1) color composite images acquired in 1972 were used for the land use and environmental assessments. The high altitude aircraft photography, as expected, was successfully used to map Level 1, Level 2, as well as some urban Level 3 land use categories. However, the detail of land use analysis obtainable from the ERTS imagery exceeded the expectations for the U.S. Geological Survey's land use classification scheme. Study results are consistent with the initial investigation which determined Level 1 land use change to be 16.7 square km per year.

Mitchel, W. B.↗

Investigation of Turbulence Generated by Upwind Blockages at the Inlet of a 1/50th-Scale Model of the 80- by 120-Foot Wind Tunnel

A 1/50th scale model of the 80- by 120-Foot Wind Tunnel (hereafter referred to as the 80x120) was utilized to determine the magnitude of turbulence caused by buildings located upstream of the wind tunnel inlet. The 1/50th scale models of existing and proposed buildings were constructed to act as blockage for the test. Various inlet locations were sampled for turbulence intensity levels under a variety of blockage conditions including simple three-dimensional rectangular bodies creating quasi two-dimensional physics along the tunnel centerline, existing building structures in the vicinity of the full-scale wind tunnel inlet flow field, and proposed building structures that may someday be constructed at NASA Ames Research Center upwind of the inlet. Therefore, the testing performed and reported in this report can be considered representative of quiescent atmospheric conditions that exist when operating the full-scale 80x120 at night. At quiescent atmospheric conditions there is a measurable increase in turbulence intensity produced by upstream blockages. The blockages examined produced an average turbulence intensity level between 2% and 5% when measured at the inlet. Previous research has shown that the flow control of the 80x120 is capable of reducing this turbulence to less than 0.5% when measured in the test section. Additional research will need to be conducted to determine the influence of atmospheric wind on relative turbulence intensity at the inlet. These results show that for future buildings lying more than 1,000 ft upstream of the full-scale 80x120 inlet, these new buildings will have a negligible effect on the flow quality of the air entering the 80x120 test section under strictly quiescent atmospheric conditions. The Googleplex buildings modeled and tested in this experiment are located approximately 2,450 ft upstream and, as seen in this test campaign, have a negligible influence on the turbulence levels measured at the inlet under quiescent atmospheric conditions.

80- by 120-Foot Wind Tunnel↗

Discussion - Next Step for Fukushima Daiichi Muon Tomography

Specification of Fukushima Daiichi Muon Tomography (FMT): (1) 18-feet (5.5-m) drift tube, 2-inch (5-cm) diameter; (2) 108 tubes per layer; (3) Unit layer = 2 layer (detection efficiency: 0.96 x 0.96 = 92%); (4) 12 or 16 layer per module; (5) 16 layers allows momentum analysis at 30% level; (6) 2 module per super module (5.5 x 11 m{sup 2}); and (7) FMT = 2 super module. By deploying MMT next to a research reactor, we will be able to measure the impact of low level radiation fields on muon tomography and reconstruction processes. Radiation level during reactor operation is {approx}50 {micro}Sv/h which provides similar radiation environment of inside the FMT radiation shield at Fukushima Daiichi. We will implement coincidence algorithm on the FPGA board.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An Experimental and Computational Approach to Investigating CO 2 Uptake of Cellulose-producing Algae from Cellulosic Ethanol Production (Final Report)

This project combined experimental algal cultures with predictive quantum calculations to evaluate system-level CO 2 uptake and conversion efficiency of cellulose-producing Nannochloropsis sp. algae. Recently, Nannochloropsis sp. has garnered attention as a novel host organism for converting low-cost CO 2 produced from cellulosic ethanol fermentations into algal lipids for biodiesel production and microcrystalline cellulose as a high-value co-product. As depicted in the figure below, this project (1) optimized Nannochloropsis salina (N. salina) cultures on effluent gas produced directly from cellulosic ethanol fermentation, (2) characterized the fermentation products, quantify cellulose production, and calculate CO 2 uptake efficiency with predictive quantum calculations, (3) conducted a life cycle and techno economic analysis of the proposed integration, and (4) provided training opportunities to students attending UC Riverside.

09 BIOMASS FUELS↗

Fermi level shifting of TiO{sub 2} nanostructures during dense electronic excitation

Scanning Kelvin probe microscopy has been used to understand the modification of work function of TiO{sub 2} with swift heavy ion irradiation. The observed increase in contact potential difference (CPD) indicates a shift in Fermi level towards the valence band, which is due to the development of defects during the bombardment of high energy heavy ions. The change in CPD values on ion irradiation is attributed to electronic excitation induced defect concentration and surface roughness.

36 MATERIALS SCIENCE↗

Physiological and genomic evidence of cysteine degradation and aerobic hydrogen sulfide production in freshwater bacteria

The sulfur-containing amino acid cysteine is abundant in the environment, including in freshwater lakes. Biological cysteine degradation can result in hydrogen sulfide (H 2 S), a toxic and ecologically relevant compound that is a central player in biogeochemical cycling in aquatic environments. Here, we investigated the ecological significance of cysteine in oxic freshwater, using isolated cultures, controlled experiments, and multiomics. We screened bacterial isolates enriched from natural lake water for their ability to produce H 2 S when provided cysteine. We identified 29 isolates (Bacteroidota, Proteobacteria, and Actinobacteria) that produced H 2 S. To understand the genomic and genetic basis for cysteine degradation and H 2 S production, we further characterized three isolates using whole-genome sequencing (using a combination of short-read and long-read sequencing) and tracked cysteine and H 2 S levels over their growth ranges: Stenotrophomonas maltophilia (Gammaproteobacteria), S. bentonitica (Gammaproteobacteria), and Chryseobacterium piscium (Bacteroidota). Cysteine decreased and H 2 S increased, and all three genomes had genes involved in cysteine degradation. Finally, to assess the presence of these organisms and genes in the environment, we surveyed a 5-year time series of metagenomic data from the same isolation source (Lake Mendota, Madison, WI, USA) and identified their presence throughout the time series. Overall, our study shows that diverse isolated bacterial strains can use cysteine and produce H 2 S under oxic conditions, and we show evidence using metagenomic data that this process may occur more broadly in natural freshwater lakes. Future considerations of sulfur cycling and biogeochemistry in oxic environments should account for H 2 S production from the degradation of organosulfur compounds.

59 BASIC BIOLOGICAL SCIENCES↗

Rapid estimation of photosynthetic leaf traits of tropical plants in diverse environmental conditions using reflectance spectroscopy

Tropical forests are one of the main carbon sinks on Earth, but the magnitude of CO 2 absorbed by tropical vegetation remains uncertain. Terrestrial biosphere models (TBMs) are commonly used to estimate the CO 2 absorbed by forests, but their performance is highly sensitive to the parameterization of processes that control leaf-level CO 2 exchange. Direct measurements of leaf respiratory and photosynthetic traits that determine vegetation CO 2 fluxes are critical, but traditional approaches are time-consuming. Reflectance spectroscopy can be a viable alternative for the estimation of these traits and, because data collection is markedly quicker than traditional gas exchange, the approach can enable the rapid assembly of large datasets. However, the application of spectroscopy to estimate photosynthetic traits across a wide range of tropical species, leaf ages and light environments has not been extensively studied. Here, we used leaf reflectance spectroscopy together with partial least-squares regression (PLSR) modeling to estimate leaf respiration ( R dark25 ), the maximum rate of carboxylation by the enzyme Rubisco ( V cmax25 ), the maximum rate of electron transport ( J max25 ), and the triose phosphate utilization rate ( T p25 ), all normalized to 25°C. We collected data from three tropical forest sites and included leaves from fifty-three species sampled at different leaf phenological stages and different leaf light environments. Our resulting spectra-trait models validated on randomly sampled data showed good predictive performance for V cmax25 , J max25 , T p25 and R dark25 (RMSE of 13, 20, 1.5 and 0.3 μmol m -2 s -1 , and R 2 of 0.74, 0.73, 0.64 and 0.58, respectively). The models showed similar performance when applied to leaves of species not included in the training dataset, illustrating that the approach is robust for capturing the main axes of trait variation in tropical species. We discuss the utility of the spectra-trait and traditional gas exchange approaches for enhancing tropical plant trait studies and improving the parameterization of TBMs.

54 ENVIRONMENTAL SCIENCES↗

Removing cosmic-ray hits from multiorbit HST Wide Field Camera images

We present an optimized algorithm that removes cosmic rays ('CRs') from multiorbit Hubble Space Telescope (HST) Wide Field/Planetary Camera ('WF/PC') images. It computes the image noise in every iteration from the WF/PC CCD equation. This includes all known sources of random and systematic calibration errors. We test this algorithm on WF/PC stacks of 2-12 orbits as a function of the number of available orbits and the formal Poissonian sigma-clipping level. We find that the algorithm needs greater than or equal 4 WF/PC exposures to locate the minimal sky signal (which is noticeably affected by CRs), with an optimal clipping level at 2-2.5 x sigma(sub Poisson). We analyze the CR flux detected on multiorbit 'CR stacks,' which are constructed by subtracting the best CR filtered images from the unfiltered 8-12 orbit average. We use an automated object finder to determine the surface density of CRS as a function of the apparent magnitude (or ADU flux) they would have generated in the images had they not been removed. The power law slope of the CR 'counts' (gamma approximately = 0.6 for N(m) m(exp gamma)) is steeper than that of the faint galaxy counts down to V approximately = 28 mag. The CR counts show a drop off between 28 less than or approximately V less than or approximately 30 mag (the latter is our formal 2 sigma point source sensitivity without spherical aberration). This prevents the CR sky integral from diverging, and is likely due to a real cutoff in the CR energy distribution below approximately 11 ADU per orbit. The integral CR surface density is less than or approximately 10(exp 8)/sq. deg, and their sky signal is V approximately = 25.5-27.0 mag/sq. arcsec, or 3%-13% of our NEP sky background (V = 23.3 mag/sq. arcsec), and well above the EBL integral of the deepest galaxy counts (B(sub J) approximately = 28.0 mag/sq. arcsec). We conclude that faint CRs will always contribute to the sky signal in the deepest WF/PC images. Since WFPC2 has approximately 2.7x lower read noise and a thicker CCD, this will result in more CR detections than in WF/PC, potentially affecting approximately 10%-20% of the pixels in multiorbit WFPC2 data cubes.

Windhorst, Rogier A.↗

Fault-tolerant resource comparison of qudit and qubit encodings for diagonal quadratic operators

Finite local Hilbert-space truncations arise naturally in quantum simulations of lattice field theories and motivate qudit encodings, but their fault-tolerant advantage over qubit encodings remains unclear. We compare the non-Clifford cost of implementing quadratic diagonal evolutions, exemplified by 𝑈 = 𝑒$^{−𝑖⁢𝑡⁢𝜙^2_𝑥}$ in a uniform field-amplitude discretization of a real scalar field, using either one logical 𝑑-level qudit or 𝑛 𝑏 = ⌈log 2⁡ 𝑑⌉ logical qubits. We analyze two standard settings: product-formula simulation and linear combination of unitaries (LCU) per block encoding, taking the resource metric to be the number of non-Clifford gates after synthesis into a discrete logical gate set. Because tight synthesis bounds for general single-qudit rotations are not known, we express the qudit constructions in terms of embedded two-level SU⁡(2) rotations and derive explicit finite-𝑑 break-even conditions for their synthesis cost; these serve as compiler targets for when qudit encodings can outperform the qubit baseline. Within the constructive models studied here, product-formula implementations would require an exponentially stronger per-primitive synthesis advantage for qudits to win asymptotically, while in the LCU setting the qubit encoding is asymptotically cheaper in 𝑑. Nevertheless, the finite-𝑑 threshold analysis identifies low-dimensional regions in which qudits can yield meaningful constant-factor savings, particularly for LCU-based implementations. As a secondary analysis of the LCU construction, we use an idealized negligible-overhead qubit-qudit code-switching model to give an absolute 𝑇-count comparison and reinterpret the savings as an allowable per-switch overhead budget.

Godwood, Samuel [Univ. of Liverpool (United Kingdo↗

Tunable Rapid Uptake Amino Polymer Aerogels for Direct Air Capture of Carbon Dioxide (Final Scientific/Technical Report)

The Palo Alto Research Center (PARC) developed a novel CO 2 adsorbent material, and in collaboration with Lawrence Livermore National Laboratory (LLNL), demonstrated its state-of-the-art performance for direct air capture. The target application for this technology is in direct air carbon capture and storage (DACCS), for which the adsorbent material provides the critical function of binding CO 2 from ambient air. At the beginning of the project, the technology concept and application were established, representing technology readiness level (TRL) 2. The hypothesis was that a microporous polymer comprising a high density of primary amines would make an exceptional adsorbent for direct air capture, and the goal of the project was to prove that hypothesis and advance the technology to TRL 3. To accomplish this, we approached the challenge from the perspective of materials synthesis optimization with the narrow focus of achieving the target material properties. This approach was successful, and we now have a synthetic procedure that results in a novel adsorbent material with the target material properties. The chemical name for the novel adsorbent material is poly(vinylamine-co-divinylbenzene) (PVAm-DVB).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗