Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Los Alamos National Laboratory Floodplain Assessment for the Technical Area 8 to Technical Area 22 Natural Gas Line Replacement Project

The National Nuclear Security Administration (NNSA), a semi-autonomous agency within the U.S. Department of Energy (DOE), is proposing new construction that crosses through upper Pajarito Canyon and upper Starmer Canyon from Technical Area (TA) 8 to TA-22 at Los Alamos National Laboratory (LANL). The project proposes to install a new 12 inch natural gas line to replace the existing 70+ year old natural gas line. Replacement will prevent loss of service to several LANL TAs and Bandelier National Monument. The project activities within the 100- year floodplains include 1) new natural gas line installation to replace and existing aging gas line, 2) relocating a section of fence and 3) three construction equipment and materials storage areas. NNSA has prepared this floodplain assessment in accordance with 10 Code of Federal Regulations (CFR) Part 1022 Compliance with Floodplain and Wetland Environmental Review Requirements (10 CFR Part 1022) (CFR 2003) which was promulgated to implement DOE requirements under Executive Order 11988 Floodplain Management (EO 1977). A floodplain is defined in 10 CFR 1022 as “the lowlands adjoining inland and coastal waters and relatively flat areas and flood prone areas of offshore islands,” and a base floodplain as “the 100-year floodplain, that is, a floodplain with a 1.0 percent chance of flooding in any given year (CFR 2003).” This floodplain assessment evaluates potential impacts to floodplain values and functions from implementation of the proposed action, identifies alternatives to the Proposed Action, and allows for meaningful public comment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Los Alamos National Laboratory Internal Audit Strategic Plan

Los Alamos National Laboratory (LANL or the Laboratory) is managed under a management and operations (M&O) contract by Triad National Security, LLC (Triad), a nonprofit, public-focused consortium that includes Battelle Memorial Institute, the Texas A&M University System, and the University of California. The Internal Audit Group (IA) at LANL creates a formal strategic plan every five years in order to establish longer-range goals and initiatives to ensure the group fulfills its purpose as established in the Audit Charter, conforms with relevant standards, and is focused on continuous improvement. This document establishes the five-year strategic plan for fiscal year’s (FY) 2024 - 2028.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Using Likwid and Byfl to Benchmark Hardware Performance

This paper outlines a benchmarking study conducted during my internship at LANL, focusing on CPU (Computer Processing Unit) and program performance assessment. The primary goal was to gather memory access data using three methods across five polybench kernels The data gathered would then be used to compare and contrast to one another and calculate operational intensity for performance comparisons. Benchmarking tools like Byfl and Likwid were employed, with Byfl offering hardware-independent data through LLVM compiler communication and Likwid directly interacting with computer hardware. The study considered various benchmarking factors, including optimization levels, Big O notation ((n)), CPU diversity and specific kernel equations. Big O notation was utilized to simplify code complexity, with detailed breakdwons of operations and memory components for each polybench application. Specific O(n) equations enabled nuanced kernel compariosns, facilitating the identification of performance variations. CPU efficiency assessments were conducted using Likwid tests on two CPUs. The central focus on code optimization aimed at achieving higher speeds and reduced memory usage through streamlined code. Future work propsoes creating a roofline model, synthesizing benchmarking data into a comprehensive data graph to assist in optimizing code and improving hardware performance. The potential impact on the laboratory or national mission was underscored, emphasizing the importance of optimizing applications and hardware to conserve resources and accelerate program execution. The specific relevance to LANL’s operations in math-intensive fields such as Nuclear Fission, Space Exploration, and Nanotechnology highlights the necessity of efficient benchmarking for resource conservation and proram speed. Overall, this study contributes to the understanding of CPU and program performance, providing insights for future optimization efforts in a laboratory setting

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Historic Source Inspection Records

To create true counts of number of containers, each container can be identified by a combination of the purchase order, unique part number and type of inspection. The column TestEventName and any columns derived from TestEventName should not be used in the instance of presource inspection because the vendor may mete out testing over multiple months, meaning that a container would be counted twice if a single test was completed in one month and another test in a different month. By counting on this combination of values, we are able to drop row entries that signify multiple tests completed on a single container. Inspection type must be used because each container will be tested by the vendor and re-tested by the LANL container engineering team. Recall that the vendor will complete action limit tests for the full set of containers during pre-source inspection but during source inspection, action limit tests are completed for only a random subset. However, LANL SMEs will complete a manual inspection for the full set of containers.

42 ENGINEERING↗
DOE OSTI2024

2023 Results for Avian Monitoring at the Technical Area 36 Minie Site, Technical Area 39 Point 6, Technical Area 16 Burn Ground, and DARHT at Los Alamos National Laboratory

Los Alamos National Laboratory (LANL) biological subject matter experts in the Environmental Protection and Compliance Division initiated a multi-year program in 2013 to monitor avifauna (birds) at two open detonation sites and one open burn site on LANL property. Additional monitoring began in 2017 at a third firing site, the Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT). In this annual report, we compare monitoring results from these efforts among years to identify and evaluate firing and open burn site impacts on the local bird community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Reduced Order Costs for CO 2 Saline Storage for Use in Energy Market Models

This report provides the results of a collaboration between NETL, Los Alamos National Laboratory (LANL) and FECM headquarters personnel. NETL's FECM/NETL CO 2 Saline Storage Cost Model (CO2_S_COM) and LANL's Sequestration of CO 2 Tool (SCO 2 T) model were run with the same assumptions to generate costs for 314 potential storage formations in the U.S. The two models gave similar results. The results from CO2S_COM were then aggregated into a smaller number of costs that can be utilized in energy market models. The report has a companion spreadsheet called red_ord_costs_CO2_S_COM with the reduced order costs. The spreadsheet can be viewed online here: https://www.netl.doe.gov/energy-analysis/details?id=fb6d93df-0702-47aa-8147-59a5ae0c7cfd

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

MARSAME Radiological Release Report for Metal Items from Technical Area 53, Set 28

Environmental Protection and Compliance, Environmental Stewardship Group (EPC-ES) has evaluated the survey results for metal items from the Los Alamos Neutron Science Center (LANSCE) at Technical Area 53 (TA-53) and found that the metal items described in Table 1 of this report (identified by Radiation Protection [RP] Tracking Numbers) meet the criteria for unrestricted release under Department of Energy (DOE) Order 458.1 Chg 4, Radiation Protection of the Public and the Environment (DOE 2020) and can be recycled. This conclusion is based on the known history of the metal items and radiation survey data (see the completed RP-Form-031 LANSCE Metals Clearance Log [LANL 2021a] for each item in Attachment 1). Process knowledge indicates that items were released from radiological areas, including radiation areas, prior to the implementation of the 2000 metals moratorium. Therefore, the items are considered unencumbered and are not subject to the moratorium suspension on metal recycling from DOE facilities. Additionally, Los Alamos National Laboratory (LANL) has determined that there is no practical opportunity for internal DOE reuse of this metal. Process knowledge indicates that these metal items were unlikely to ever be in direct contact with the beam and thus are unlikely to have become activated. Surface contamination measurements (both total and removable) showed either no detectable radioactivity or activity levels within the range of background. All measurements for volumetric contamination were indistinguishable from background based on calculated decision limits. Additionally, all gamma isotopic surveys conducted for defense-in depth showed no identifiable gamma radiation from beam activation.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

MARSAME Radiological Release Report for Metal Items from TA 53, Set 22

EPC-ES has evaluated the survey results for metal items from the Los Alamos Neutron Science Center (LANSCE) and found that the metal items described in Table 1 of this report (identified by RP Tracking Numbers) meet the criteria for unrestricted release under DOE Order458.1 Radiation Protection of the Public and the Environment (DOE 2020) and can be recycled. This conclusion is based on the known history of the metal items and on radiation survey data (see the completed RP-Form-031 LANSCE Metals Clearance Log [LANL 2021a] for each item). None of the items in this report are located within radiological areas. Therefore, the items are considered unencumbered and are not subject to the moratorium suspension on metal recycling from Department of Energy facilities. Additionally, LANL has determined that there is no practical opportunity for internal DOE reuse or recycling of this metal. Process knowledge indicates that these metal items were unlikely to ever bein direct contact with the beam and thus are unlikely to have become activated. Surface contamination measurements (both total and removable) showed either no detectable radioactivity or activity levels within the range of background. All measurements for volumetric contamination were indistinguishable from background based on calculated decision limits. Additionally, all gamma isotopic surveys conducted for defense-in-depth showed no identifiable gamma radiation from beam activation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterization Report for the MP-1 Experiment Fabrication Campaign (Rev.1)

This report covers the results of MP 1 fuel characterization analysis to provide a detailed understanding of the as-fabricated fuel that would be irradiated in the MP 1 (Mini-Plate 1) experiment. The work was performed at Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), and Los Alamos National Laboratory (LANL). Characterization of the as-fabricated fuel was performed in accordance with Characterization Plan for the Fabrication of U 10Mo for the MP 1 Experiment, hereinafter the MP 1 Characterization Plan (MAQP 2016). Under the MP 1 Characterization Plan, fuel foils at different points in the foil fabrication process (e.g., hot rolled annealed, cold rolled annealed) were studied to understand the effect of various thermomechanical processes on the fuel microstructure. Samples were sent to each of the three organizations so that testing and analysis could be performed independently using similar equipment and a standardized set of measurement and analysis procedures. The MP 1 experiment will provide an opportunity to understand the effects of processing conditions on the final fuel microstructure, to compare independently obtained results, and achieve a three-way validation. PNNL characterized 28 uranium–10 wt% molybdenum (U 10Mo) samples. Six pieces/specimens from each sample/foil were sectioned, in accordance with the MP 1 Characterization Plan. Similarly, INL and LANL also examined 24 and 17 U 10Mo specimens, respectively. These total 69 samples consist of six types of MP 1 characterization foils fabricated by Babcock and Wilcox Technologies (BWXT) from ingots produced by the Y-12 National Security Complex: (a.) 0.047 in.-thick hot-rolled and annealed samples with and without Zr layers; (b.) 0.02 in.-thick cold-rolled and annealed samples with and without Zr layers; and (c.) 0.01 in.-thick cold-rolled and annealed samples with and without Zr layers. Microstructure, chemical composition, carbide morphology, U 10Mo foil thickness, Zr thickness, mechanical properties (microhardness), and density were evaluated in both longitudinal and transverse directions for foils of the three different thicknesses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Hidden in Plain Sight How Interior Furnishings Management Can Help Los Alamos National Laboratory Meet the United States Department of Energy's Sustainability Goals [Slides]

Annually close to 50,000 lbs. of furniture avoids landfills through this program. Over a ten year (2020-2030) over 224 tons of furniture will avoid landfills through the program, that is the weight of the Statue of Liberty. The ReUse program saves LANL $\$172,875$ annually based on the salvage value of the furniture. If the product reused were to be purchased new, LANL would spen close to $1,200,000.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Chemistry and Metallurgy Research Building Historical Perchlorate Data and Discussion

The Chemistry and Metallurgy Research Building (CMR), located at TA-03-0029, was built in 1952 and was occupied by Los Alamos National Laboratory (LANL) employees in 1953. The facility was built to perform actinide analytical chemistry and material characterization in support of LANL and Department of Energy (DOE) mission of stockpile stewardship and research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recapitalizing Aging Infrastructure for a Net-Zero Future

The Chemistry and Metallurgy Research Facility (CMR) was built in 1952. The original structure consisted of five laboratory wings and office and administration wings. Wing 9 was added in 1959 to house unique equipment and capabilities for the national security mission of the United States. At the time, a centralized heat and power (CHP) plant was the best and most efficient option for serving large campuses, as was the use of fossil fuels, so CMR was put on LANL’s utility steam loop. Given the magnitude of heating energy requirements for the facility, it is a substantial greenhouse gas (GHG) contributor at Los Alamos National Laboratory (LANL) and has been for over 70 years.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Annual Performance Testing of Tracer Gas Detectors for use in Radionuclide NESHAP Compliance Testing

Los Alamos National Laboratory’s (LANL’s) compliance with Radionuclide NESHAP0F 1 regulations is managed by the Radioactive Air Emissions Management (RAEM) team, part of LANL’s Compliance Programs group (EPC-CP). One area of the Radionuclide NESHAP addresses requirements for siting a stack sample system. Prior to commissioning a new stack sampling system, the ANSI Standard for stack sampling requires that the stack sample location must meet several criteria, including uniform mixing of tracer gas (sulfur hexafluoride, SF 6 ) and tracer aerosol (liquid oil droplets) in the air stream. This memorandum will specifically focus on the tracer gas portion of the ANSI Standard. For these mix tests, tracer gas is injected into the stack air stream and the resulting air concentrations are measured across the plane of the stack at the proposed sampling location. The coefficient of variation of the media concentration must be under 20% when evaluated over the central 2/3 area of the stack or duct.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Kit Carson Site Visit [Slides]

Greening the grid: decarbonize LANL’s electricity supply through the Los Alamos Power Pool; Net-Zero Buildings: Ensure new buildings are Net-Zero Ready and retrofit existing buildings to minimize Scope 1 emissions; Living laboratory: Leverage LANL’s clean energy R&D expertise to deploy technologies on-site at scale.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Ristra Project FY23 L2 Milestone Report, Rev.1: MRT #8541: Multiphysics Scaling on EAS-3

The findings of this report were used to close out the ATDM milestone MRT# 8541, which was designed to demonstrate readiness of ATDM multiphysics codes for mission-relevant work on ATS-4, El Capitan. To this end, the closure criteria were to run a 3D shaped charge problem at scale up to 50% of the El Capitan early-access system, RZVernal (AMD Trento CPUs and AMD MI-250X GPUs), demonstrate scalability, and document challenges with the software stack and environment. LANL’s approach to this milestone was to test our modular software capability by developing an entirely new code, Moya, built upon our FleCSI framework. The physics capability and the GPU infrastructure needed for the shaped charge problem on GPUs was added to Moya, and the required calculations were performed at scale. Moya showed good scaling without any fine-tuning of GPU kernels; there is still significant room for performance enhancements, especially for the Legion backend. Tied up in this L2 milestone was a closeout of KPP-3s for the ECP ST Projects at LANL; this material will be covered in a separate document.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

HEU Pancake Plates

The HEU Pancake plates, formerly known as the Jemima plates, were procured in two batches. The first, consisting of the 15” plates, was ordered and produced by LANL in 1958. A second set, consisting of the 21” rings was ordered by LANL but produced by ORNL sometime in the 1960s. The plates were used at LACEF in experiments such as Big Ten and the Zeus series of experiments. In the mid-2000s, they were shipped to NCERC where they reside today. Since being at NCERC, they have been used in Zeus and TEX style experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

HALEU Experiments [Slides]

The DNCSH, through the HALEU Availability Program, needs publicly available benchmarks supporting Advanced Reactor Fuel Cycle and Transportation. LANL is uniquely positioned to support this goal, with its past experiments at TA-18, planned experiments at NCERC, experiment design capability, and ties to industry. The Deimos experiment will be executed soon and serve as a premier benchmark for the program. LANL expects to submit proposals to the call when issued (soon). Additional experiments supporting DNCSH have already been designed

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

ROADRUNNER MiniFuel Experiment: Irradiation Target Design and Sample Characterization

High-density uranium nitride (UN) is a fuel candidate for several advanced nuclear reactor designs currently under development. Because there are limited UN performance data relative to fuel fabrication impurity and density variation, an irradiation campaign has been developed as part of a collaborative effort among the University of Texas at San Antonio (UTSA), Westinghouse Electric Company, Oak Ridge National Laboratory (ORNL), and Los Alamos National Laboratory (LANL) under the Nuclear Science User Facilities program. This project, entitled ROADRUNNER, or Research On ADvancing the peRformance of UraNium Nitrides in Extreme enviRonments, aimsto support UN fuel qualification for advanced reactors by investigating the impact of density and impurity variations on UN performance as a function of irradiation temperature and burnup. The MiniFuel experiment vehicle developed by ORNL, which leverages the High Flux Isotope Reactor, was selected to perform this accelerated separate-effects irradiation testing. The experiment test matrix consists of six MiniFuel targets containing miniature UN fuel disks, and targets three distinct burnup levels (37.5, 60, and 75 MWd/kg U) and three distinct temperatures (600, 900, and 1200°C). Neutronics and thermal analyses were performed to determine the experimental parameters needed to meet the desired irradiation conditions and to predict the experiment components temperatures. UN pellets were fabricated at LANL with tightly controlled parameters to produce specimens with three distinct densities and three levels of carbon content. The pellets were then thinned down by UTSA to the experiment-required thickness. The pre-characterization of the specimens includes density measurements, carbon and oxygen contents, microstructure analysis, and x-ray computed tomography. The selected specimens will be assembled into the MiniFuel experiment, and the first ROADRUNNER MiniFuel targets are intended for HFIR insertion during the Fall of 2024. After irradiation, the targets will be shipped to ORNL’s hot cell facility for disassembly. The post-irradiation examination on the fuel specimens includes fission gas release measurements, visual inspection, fuel swelling measurements, gamma spectroscopy, and microstructure analysis. The data collected post-irradiation will be used to develop fuel performance models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗