Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDUSTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Highly Efficient and Stable Perovskite Solar Cells Enabled by Low‐Cost Industrial Organic Pigment Coating

Abstract Surface passivation of perovskite solar cells (PSCs) using a low‐cost industrial organic pigment quinacridone (QA) is presented. The procedure involves solution processing a soluble derivative of QA, N , N ‐bis(tert‐butyloxycarbonyl)‐quinacridone (TBOC‐QA), followed by thermal annealing to convert TBOC‐QA into insoluble QA. With halide perovskite thin films coated by QA, PSCs based on methylammonium lead iodide (MAPbI 3 ) showed significantly improved performance with remarkable stability. A PCE of 21.1 % was achieved, which is much higher than 18.9 % recorded for the unmodified devices. The QA coating with exceptional insolubility and hydrophobicity also led to greatly enhanced contact angle from 35.6° for the pristine MAPbI 3 thin films to 77.2° for QA coated MAPbI 3 thin films. The stability of QA passivated MAPbI 3 perovskite thin films and PSCs were significantly enhanced, retaining about 90 % of the initial efficiencies after more than 1000 hours storage under ambient conditions.

He, Qingquan↗

Recent developments in polymers derived from industrial lignin

Lignin is an aromatic polymer that makes up 15–30% of the cell walls of terrestrial plants. While lignin’s role in facilitating water transport through the vasculature, providing rigidity and acting as a defense against pests and pathogens is important for the plant’s survival, industries that process plant biomass for the production of biofuels and bio-based chemicals have historically primarily been interested in the cell wall polysaccharides, especially cellulose. Consequently, lignin is generated in large quantities as a by-product that is often burned to generate heat and electricity, or that is used in low-value applications. It is becoming clear that, rather than treating it as waste, lignin is very suitable for the production of enhanced composites, carbon fibers, and nanomaterials, which offers both economic and environmental benefits. As such, this review highlights recent uses of these polymers as adsorbents, flocculants, adhesives, anti-oxidants, energy storing films, and vehicles for drug delivery and gene therapy.

36 MATERIALS SCIENCE↗

Using a Continuous‐Improvement Approach for Industrial PFAS Management

Lowering per- and polyfluoroalkyl substances (PFAS) levels in the long term requires more than end-of-pipe treatment and expensive infrastructure upgrades. Here, a continuous-improvement framework can serve as a guide for active communication and engagement with upstream industrial dischargers. Measurement and monitoring, source reduction, management, and workforce development form essential pillars for effective PFAS management.

Sharma, Naushita [Oak Ridge National Laboratory (O↗

Retrospective analysis of the U.S. corn ethanol industry for 2005–2019: implications for greenhouse gas emission reductions

Since 2000, corn ethanol production in the USA has increased significantly – from 1.6 to 15 billion gallons (6.1 to 57 billion liters) – due to supportive biofuel policies. In this study, we conduct a retrospective analysis of the changes in US corn ethanol greenhouse gas emission intensity, sometimes known as carbon intensity (CI), over the 15 years from 2005 to 2019. Our analysis shows a significant decrease in CI: from 58 to 45 gCO 2 e/MJ of corn ethanol (a 23% reduction). This is due to several factors. Corn grain yield has increased continuously, reaching 168 bushels/acre (10.5 metric tons/ha, a 15% increase) while fertilizer inputs per acre have remained constant, resulting in decreased intensities of fertilizer inputs (e.g., 7% and 18% reduction in nitrogen and potash use per bushel of corn grain harvested, respectively). A 6.5% increase in ethanol yield, from 2.70 to 2.86 gal/bushel corn (0.402 to 0.427 L kg -1 corn), and a 24% reduction in ethanol plant energy use, from 32 000 to 25 000 Btu/gal ethanol (9.0 to 6.9 MJ L -1 ethanol) also helped reduce the CI. The total GHG emission reduction benefits through the reduction in the CI and increased ethanol production volume are estimated at 140 million metric tons (MMT) from 2005 to 2019 in the ethanol industry. Displacement of petroleum gasoline by corn ethanol in the transportation fuel market resulted in a total GHG emission reduction benefit of 544 MMT CO 2 e during the period 2005 to 2019.

09 BIOMASS FUELS↗

Toward industrial production of isoprenoids in Escherichia coli : Lessons learned from CRISPR-Cas9 based optimization of a chromosomally integrated mevalonate pathway

Escherichia coli has been the organism of choice for the production of different chemicals by engineering native and heterologous pathways. In the present study, we simultaneously address some of the main issues associated with E. coli as an industrial platform for isoprenoids, including an inability to grow on sucrose, a lack of endogenous control over toxic mevalonate (MVA) pathway intermediates, and the limited pathway engineering into the chromosome. As a proof of concept, we generated an E. coli DH1 strain able to produce the isoprenoid bisabolene from sucrose by integrating the cscAKB operon into the chromosome and by expressing a heterologous MVA pathway under stress-responsive control. Production levels dropped dramatically relative to plasmid-mediated expression when the entire pathway was integrated into the chromosome. In order to optimize the chromosomally integrated MVA pathway, we established a CRISPR-Cas9 system to rapidly and systematically replace promoter sequences. This strategy led to higher pathway expression and a fivefold improvement in bisabolene production. More interestingly, we analyzed proteomics data sets to understand and address some of the challenges associated with metabolic engineering of the chromosomally integrated pathway. This report shows that integrating plasmid-optimized operons into the genome and making them work optimally is not a straightforward task and any poor engineering choices on the chromosome may lead to cell death rather than just resulting in low titers. Based on these results, we also propose directions for chromosomal metabolic engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Reaction Optimization for Enzymatic Deconstruction of Industrially Relevant Nylon Composites

Plastics such as polyamides (PAs) possess unique physicochemical properties that make them indispensable in modern society. However, their energy‐intensive production and challenging end‐of‐life management highlight the urgent need for efficient recycling or remanufacturing solutions. Enzymatic depolymerization offers a promising route toward circular recycling, yet remains constrained by limited enzyme characterization, lack of validation under industrially relevant conditions and substrates, and overall performance. Here, we optimized the reaction conditions for three recently discovered nylon‐degrading enzymes. One of them, Nyl12, achieved product titers with PA6 and PA66 that exceed previously reported values, without enzyme engineering or substrate pretreatment. We further demonstrated the scalability of the process and its application to complex PA‐based materials used in microelectronic components. Analysis of substrate features, including surface area and particle size, revealed key parameters governing enzymatic activity and provided a framework for future pretreatment and process optimization efforts. In combination, these efforts provide a new benchmark for enzymatic nylon recycling.

nylon↗

A low-input strategy for chromium removal from industrial stormwater using peat sorbent

Low-cost and low-input water treatment systems are important for industrial stormwater remediation. Here we examine a flow-through reactor treatment installation where water exceeds the allowable maximum concentration for drinking water in multiple metals (e.g., chromium [Cr], cadmium [Cd], zinc [Zn]) prior to treatment. Specifically, we seek to understand why Cr attenuated in the reactors is not leachable by identifying the specific chemical form of Cr and dominant mechanisms promoting sequestration in the reactors. Total solid-phase Cr concentration in the peat media ranged from 50 to 150 mg/kg after 1 yr of exposure to stormwater to 300 to 900 mg/kg after 3.5 yr. X-ray fluorescence mapping images show Cr, iron (Fe), and Zn spatially correlated over a scale of 10 μm to 5 mm. Chromium rinds form on the edges of peat particles as Cr accumulates. Chromium and Fe K-edge X-ray absorption near edge structure spectroscopy reveal chromium predominately in the 3+ oxidation state with lesser amounts of elemental Cr. We propose the primary means of chromium attenuation in the reactors is precipitation as Cr-Fe hydroxides combined with trivalent Cr adsorption onto peat surfaces.

36 MATERIALS SCIENCE↗

Characterization of demand response in the commercial, industrial, and residential sectors in the United States

The goal of our study is to provide an overview of demand response (DR) technologies, including standards and end uses, in the United States and describe resource characteristics and the attributes of 14 specific DR resources in the U.S. commercial, residential, and industrial sectors. The attributes reviewed for the end uses being considered are response frequency, response time, the need for and impacts of energy pre- or recharge, the cost of enabling a resource to respond to a load-curtailment signal, and the magnitude of load curtailment in a given resource. We also describe controls and communications technologies that can enable end uses to participate in DR programs. The characterization was initially developed as a foundational work to quantify hourly availability of DR resources from the selected end uses followed by a multi-laboratory effort that quantified DR's value within the Western Interconnection.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Rhodococcus and Yarrowia-Based Lipid Production Using Lignin-Containing Industrial Residues

Improvement in biorefining technologies coupled with development of novel fermentation strategies and analysis will be paramount in establishing supplementary and sustainable biofuel pathways. Oleaginous microorganisms that are capable of accumulating triacylglycerides (TAGs) and fatty acid methyl esters (FAMEs), such as Rhodococcus and Yarrowia species, can be used to produce second-generation biofuels from non-food competing carbon sources. These “microbiorefineries” provide a pathway to upgrade agricultural and industrial waste streams to fungible fuels or precursors to chemicals and materials. Here we provide a general overview on cultivating Rhodococcus and Yarrowia on agro-waste/industrial biomass pretreatment waste streams to produce single-cell oils/lipids and preparing samples for FAME detection.

Le, Rosemary K.↗

Computational Methods to Accelerate Development of Corrosion Resistant Coatings for Industrial Gas Turbines

Oxidation resistant overlay coatings protect the underlying superalloy component in industrial gas turbines from oxidation attack. Rate of depletion of the Al-rich β-phase in the bond coat governs the lifetime of these coatings. The applicability of a computational method in accelerating the development of corrosion resistant coatings and significantly reducing the extensive experimental effort to predict coating lifetimes and microstructural changes in three-coated Ni-based superalloys for real operational durations (20–40 kh) was undertaken in the present study. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and electron microprobe analysis (EPMA) were employed to characterize MCrAlY-coated superalloy substrates (1483, 247 and X4) after exposure at 900 °C in air + 10% H 2 O for up to 20,000 h. The model predicted the longest coating lifetime for the coating on X4 substrate. Precipitation of γ' in the coatings was correctly predicted for all three coating systems. Additionally, the model was able to predict the formation of topologically close packed (TCP)-phases in the investigated coating systems.

Pillai, Rishi R.↗

The Role of Fuels in Transforming Energy End-Use in Buildings and Industrial Processes

This book examines what role fuels have in the transformation of end-use in buildings and industrial processes. Energy efficient technologies are necessary to lower the carbon footprint for a transition towards clean energy in a sustainable manner. Efficient utilization of primary energy resources including renewables to support the current and future energy needs while targeting grid resiliency, energy and environmental security, at an affordable cost is of significant value. Analysis of configurations consisting of heat pumps, fuel driven thermal providers and power systems is presented. Sensitivity of electrical grid's carbon intensity towards carbon footprint in comparison with fuel driven technologies is necessary to recognize the true value proposition of currently available energy solutions for different end consumers. Similarly, the role of low carbon, zero carbon, and carbon negative fuels such as power to gas, power to liquid, hydrogen, biogas, etc. in conjunction with polygeneration technologies are discussed. Transformation of the primary energy resources from conventional fossil fuels to renewable fuels or electricity will have a significant impact on the overall carbon footprint of various end use sectors, including buildings. Hence, this book also examines two different scenarios focused on sensitivity of the pace of decarbonization of electrical grid and fuel supply on operational energy related carbon emissions.

Cheekatamarla, Praveen↗

Assaying baseline status of particulate laden polyaromatic hydrocarbon for a grass root level industrial project

A study of particulate laden polyaromatic hydrocarbon was conducted at 13 selected locations in a 10 km radial distance of a proposed site for a grass root level industry. Suspended particulate matter samples were continuously monitored for 24 h over a period of 3 months. The Polyaromatic Hydrocarbons (PAHs) were extracted from the particulate samples and analysed using Gas Chromatograph-Mass Spectrometer. Limit of Quantification was also established for individual PAHs. Coal combustion and traffic emission were the major contributors for PAHs in the region. The relative contribution of 2, 3, 4, 5, and 6 ring PAHs in particulates of different sampling sites was also investigated and it is observed that 4 ring (29.76%) and 5 ring (29.06%) compounds are prominent in the particulates measured in the region.

01 COAL, LIGNITE, AND PEAT↗

Paenibacillus aquistagni sp. nov., isolated from an artificial lake accumulating industrial wastewater

Strain 11 T was isolated from water of an artificial lake accumulating industrial wastewater on the outskirts of Celje, Slovenia. In this paper, phenotypic characterisation showed strain 11 T to be a Gram-stain positive, spore forming bacterium. The 16S rRNA gene sequence identified strain 11 T as a member of the genus Paenibacillus, closely related to Paenibacillus alvei (96.2%). Genomic similarity with P. alvei 29 T was 73.1% (gANI), 70.2% (ANIb), 86.7% (ANIm) and 21.7 ± 2.3% (GGDC). The DNA G+C content of strain 11 T was determined to be 47.5%. The predominant menaquinone of strain 11 T was identified as MK-7 and the major fatty acid as anteiso-C 15:0 . The peptidoglycan was found to contain meso-diaminopimelic acid. In contrast to its close relatives P. alvei DSM 29 T , Paenibacillus apiarius DSM 5581 T and Paenibacillus profundus NRIC 0885 T , strain 11 T was found to be able to ferment d-fructose, d-mannose and d-xylose. A draft genome of strain 11 T contains a cluster of genes associated with type IV pilin synthesis usually found in clostridia, and only sporadically in other Gram-positive bacteria. Finally, genotypic, chemotaxonomic, physiological and biochemical characteristics of strain 11 T presented in this study support the creation of a novel species within the genus Paenibacillus, for which the name Paenibacillus aquistagni sp. nov. is proposed, with strain 11 T (=ZIM B1027 T =LMG 29561 T =CCM 8679 T ) as the type strain.

54 ENVIRONMENTAL SCIENCES↗

The Current State of High-Fidelity Simulations for Main Gas Path Turbomachinery Components and Their Industrial Impact

High-fidelity simulations have become feasible for most main gas path turbomachinery components, over the past two decades. This paper introduces the key challenges of simulating and modelling turbomachinery flows and presents an overview of possible simulation strategies. A comprehensive overview is given of which particular design challenges have to date been addressed by high-fidelity simulations, with a particular focus on high-pressure and centrifugal compressors, and high-pressure and low-pressure turbines. Recommendations are provided for how quality and accuracy can be ensured for high-fidelity simulations, using direct numerical simulations of a low-pressure turbine as a case study. It is argued that industrial impact from high-fidelity simulations can be achieved in two ways, either by conducting design-of-experiment-like studies that can provide designers with insight into certain physical mechanisms and phenomena, or by helping mature and improve lower-order models. The latter is discussed with particular emphasis on recent advances in machine learning for model assessment and improvement, and the potential of one selected data-driven approach is demonstrated on predictions of wake mixing for low-pressure and high-pressure turbines.

Mechanics↗

Research on the Mechanism and Kinetics of Oil-Product Adsorption from Industrial Wastewater by a Modified Hydrophobic Carbonate Sludge

Features of dissolved oil-product adsorption from industrial wastewater by a modified hydrophobic carbonate sludge are studied. The adsorption isotherm is obtained. The adsorption mechanism on the new sorbent is investigated as physical unactivated adsorption using thermodynamic and kinetic parameters. The Gibbs free energy (–(20.26–21.46) kJ/mol), isosteric heat of adsorption (0.9–1.17 kJ/mol), adsorption rate constants ((0.2–0.47)·10{sup –3}sec{sup –1}), and apparent activation energy (6.6–28.6 kJ/mol) are calculated. Adsorption under dynamic conditions is studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scatter Signal Elimination by Localized Primary Modulation in Industrial Computed Radiography

In industrial computed radiography, same as the other projection imaging systems, quantitative integrated information of total beam path including the object is carried by primary part of the beam. It is well known that the accuracy of the image useful data carried by the primary part degrades by scattered part of the beam. In order to have the beam path quantitative information accurately, it is essential to obtain the primary part of the total signal purely. In current study, a practical approach using localized primary modulation has been proposed to extract the primary signal. A semi-transparent beam attenuation grid was used as the beam intensity modulator. Efficiency and accuracy of the approach was practically validated through thickness measurement of metallic planar steps as an illustrative example. Simplified practical implementation and availability of the required accessories are some of advantages of the proposed approach. The results are indicative of the fact that this approach can also be applied as a new technique in thickness measurement, yielding a noticeable accuracy improvement in the most radiography methods. A procedure is included to explain the approach implementation for thickness measurement in computed radiography systems. The procedure overcomes some practical limitations and difficulties of the approach adaptation for computed radiography.

42 ENGINEERING↗

Experimental Measurement of Scatter to Primary Ratio by Localized Primary Modulation in Industrial Computed Radiography

The scatter-to-primary ratio (SPR), can serve as an important parameter for performing the scatter correction procedures or build up factor determination in radiography projections. In this work an experimental technique is presented based on localized primary modulation for direct SPR measurement. As illustrative examples, the SPR is measured for steel and aluminum step wedges to demonstrate the applicability of the presented technique in computed radiography. As a required parameter, the effective transmission factor of the modulator is measured using primary beam stopping concept over a calibration block. This technique has significant advantages such as a straight forward theory, simplified applicability in industrial site conditions, beam hardening consideration as well as automation possibility. The technique works by a single image acquisition, without image data loss in the interested area.

42 ENGINEERING↗

Enhancing the Structural and Spectroscopic Properties of Cr{sup 3+} Ion-Doped Ni/Cd/Zn Nanoferrite To Be Applied To Industrial Applications

Nanocrystalline Cr-doped Ni/Cd/Zn of general formula Ni{sub 0.7}Cd{sub 0.1}Zn{sub 0.2}Cr{sub x}Fe{sub 2−x}O{sub 4} (x= 0, 0.1, 0.3, 0.5, 0.7, 1) were synthesized by coprecipitation method. X-ray analysis (XRD) confirmed that the samples had a single-phase cubic spinel structure. The morphology was studied using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) to assure that the samples were in the nanoscale range. Spectroscopic analysis was carried out using UV-VIS-NIR spectroscopy for all samples. One can conclude that Ni{sub 0.7}Cd{sub 0.1}Zn{sub 0.2}Cr{sub 0.5}Fe{sub 1.5}O{sub 4} had the most suitable energy bandgap that could be applied to the visible light region and many industrial applications. Moreover, this sample (Ni{sub 0.7}Cd{sub 0.1}Zn{sub 0.2}Cr{sub 0.5}Fe{sub 1.5}O{sub 4}) played an important role in the improvement of photocatalytic efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗