Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Large-scale, nonsubtractive patterning of transparent conducting oxides by ion bombardment

While significant progress has been achieved in the fabrication and performance of transparent electronic devices, substantially less research effort has been devoted to transparent interconnects, despite their critical importance for transparent integrated circuitry. Here, we exploit the crystal disorder induced by Ar{sup +} ion bombardment to achieve efficient fabrication of electrically conductive patterns on indium oxide surfaces. The resulting ion-induced patterns are characterized by conductive atomic force microscopy, secondary ion mass spectrometry, and four-point charge transport measurements. Massively parallel patterning is demonstrated over square centimeter areas with a patterned electrical conductivity of {approx}10{sup 4} S cm{sup -1}.

36 MATERIALS SCIENCE↗

Thermal studies of Se{sub 85-x}Te{sub 15}In{sub x} (x = 3,6,9,12) glasses

Bulk glasses of compositions Se{sub 85-x}Te{sub 15}In{sub x} (x = 3,6,9,12) are prepared by melt quenching technique and Differential scanning calorimetry (DSC) is employed to study the thermal stability, crystallization mechanism as well as specific heat of these glasses. It is found that the addition of indium increases the glass transition temperature. From the heating rate dependence of the glass transition temperature the activation energy of glass transition is determined using Kissinger's equation for non-isothermal crystallization of materials. An attempt has been made to explain the variation in the value of T{sub c}, T{sub p} and {Delta}C{sub p} for the composition Se{sub 73}Te{sub 15}In{sub 12} using rigidity percolation threshold (RPT). From the values of (T{sub c}-T{sub g}) the stable glass system is determined.

36 MATERIALS SCIENCE↗

Growth mechanism and electronic properties of epitaxial In{sub 2}O{sub 3} films on sapphire

In this work, we report on the epitaxial growth of high-quality cubic indium oxide thick films on c-plane sapphire substrates using a two-step growth process. The epitaxial relationship of In{sub 2}O{sub 3} on (0001) Al{sub 2}O{sub 3} has been investigated. The (222) plane spacing and lattice parameter of a most strain-relaxed high-quality In{sub 2}O{sub 3} film have been determined to be 292.58 pm and 1013.53 pm, respectively. The electronic properties in dependence of the film thickness are interpreted using a three-region model. The density at the surface and interface totals (3.3{+-}1.5)x10{sup 13}cm{sup -2}, while the background electron density in the bulk was determined to be (2.4{+-}0.5)x10{sup 18}cm{sup -3}. Furthermore, post treatments such as irradiation via ultraviolet light and ozone oxidation have been found to influence only the surface layer, while the bulk electronic properties remain unchanged.

36 MATERIALS SCIENCE↗

Characterization of amorphous In{sub 2}O{sub 3}: An ab initio molecular dynamics study

In this work, we report on the structural and electronic properties of amorphous In{sub 2}O{sub 3} obtained with ab initio molecular dynamics. Our results show crystal-like short range InO{sub 6} polyhedra having average In-O distance consistent with x-ray spectroscopy data. Structural disorder yields band tailing and localized states, which are responsible of a strong reduction of the electronic gap. Most importantly, the appearance of a peculiar O-O bond imparts n-type character to the amorphous compound and provides contribution for interpreting spectroscopic measurements on indium based oxidized systems. Our findings portray characteristic features to attribute transparent semiconductive properties to amorphous In{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

A 24 keV liquid-metal-jet x-ray source for biomedical applications

We present a high-brightness 24-keV electron-impact microfocus x-ray source based on continuous operation of a heated liquid-indium/gallium-jet anode. The 30-70 W electron beam is magnetically focused onto the jet, producing a circular 7-13 {mu}m full width half maximum x-ray spot. The measured spectral brightness at the 24.2 keV In K{sub {alpha}} line is 3 x 10{sup 9} photons/(s x mm{sup 2}x mrad{sup 2}x 0.1% BW) at 30 W electron-beam power. The high photon energy compared to existing liquid-metal-jet sources increases the penetration depth and allows imaging of thicker samples. The applicability of the source in the biomedical field is demonstrated by high-resolution imaging of a mammography phantom and a phase-contrast angiography phantom.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large area ceramic thin films on plastics: A versatile route via solution processing

A new general route for large area, submicron thick ceramic thin films (crystalline metal oxide thin films) on plastic substrates is presented, where the crystallization of films is guaranteed by a firing process. Gel films are deposited on silicon substrates with a release layer and fired to be ceramic films, followed by transferring onto plastic substrates using adhesives. The ceramic films thus fabricated on plastics exhibit a certain degree of flexibility, implying the possibility of the technique to be applied to high-throughput roll-to-roll processes. Using this technique, we successfully realized transparent anatase thin films that provide high optical reflectance and transparent indium tin oxide thin films that exhibit electrical conductivity on polycarbonate and acrylic resin substrates, respectively. Crystallographically oriented zinc oxide films and patterned zinc oxide films are also demonstrated to be realized on acrylic resin substrates.

36 MATERIALS SCIENCE↗

Designing interlayers to improve the mechanical reliability of transparent conductive oxide coatings on flexible substrates

In this study, we investigate the effect of interlayers on the mechanical properties of transparent conductive oxide (TCO) on flexible polymer substrates. Indium tin oxide (ITO), which is the most widely used TCO film, and Ti, which is the most widely used adhesive interlayer, are selected as the coating and the interlayer, respectively. These films are deposited on the polymer substrates using dc-magnetron sputtering to achieve varying thicknesses. The changes in the following critical factors for film cracking and delamination are analyzed: the internal stress ({sigma}{sup i}) induced in the coatings during deposition using a white light interferometer, the crystallinity using a transmission electron microscope, and the surface roughness of ITO caused by the interlayer using an atomic force microscope. The resistances to the cracking and delamination of ITO are evaluated using a fragmentation test. Our tests and analyses reveal the important role of the interlayers, which significantly reduce the compressive {sigma}{sup i} that is induced in the ITO and increase the resistance to the buckling delamination of the ITO. However, the relaxation of {sigma}{sup i} is not beneficial to cracking because there is less compensation for the external tension as {sigma}{sup i} further decreases. Based on these results, the microstructural control is revealed as a more influential factor than {sigma}{sup i} for improving crack resistance.

36 MATERIALS SCIENCE↗

Growth of sputter-deposited metamagnetic epitaxial Ni-Co-Mn-In films

Metamagnetic thin films represent a promising geometry for more efficient magnetocaloric cooling applications due to a fast heat transfer. Here, we identify suitable growth conditions to obtain epitaxial Ni-Mn-In-Co films with a metamagnetic transition in vicinity of room temperature. We show that both increased substrate temperature and target aging result in loss of indium. This can be attributed to evaporation and preferential sputtering, respectively. We present a model that treats the effect of target aging and temperature dependence of evaporation on the film composition independently and enables predictions of the film composition as a function of initial target composition, target age, and deposition temperature. Furthermore, our analysis reveals that a sufficient degree of chemical B2 order is required for a transformation, in addition to an appropriate film composition.

36 MATERIALS SCIENCE↗

InGaN/GaN single-quantum-well microdisks

We have grown In{sub x}Ga{sub 1-x}N/GaN quantum wells atop GaN microdisk with {gamma}-LiAlO{sub 2} substrate by using plasma-assisted molecular beam epitaxy. The structural and optical properties of the samples were analyzed by transmission electron microscopy, x-ray diffraction, cathodoluminescence, and photoluminescence measurements. Based on the measured results, we obtained the indium concentration of the In{sub x}Ga{sub 1-x}N/GaN single quantum well to be x = 0.25 with a band-gap energy of 2.31 eV, which is consistent with the bowing effect of bulk In{sub x}Ga{sub 1-x}N: E{sub g}(x) = [3.42 - x * 2.65 - x * (1 - x) * 2.4] eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-compensation in highly n-type InN

Acceptor-type defects in highly n-type InN are probed using positron annihilation spectroscopy. Results are compared to Hall effect measurements and calculated electron mobilities. Based on this, self-compensation in n-type InN is studied, and the microscopic origin of compensating and scattering centers in irradiated and Si-doped InN is discussed. We find significant compensation through negatively charged indium vacancy complexes as well as additional acceptor-type defects with no or small effective open volume, which act as scattering centers in highly n-type InN samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron activation diagnostics at the National Ignition Facility (invited)

Neutron yields are measured at the National Ignition Facility (NIF) by an extensive suite of neutron activation diagnostics. Neutrons interact with materials whose reaction cross sections threshold just below the fusion neutron production energy, providing an accurate measure of primary unscattered neutrons without contribution from lower-energy scattered neutrons. Indium samples are mounted on diagnostic instrument manipulators in the NIF target chamber, 25-50 cm from the source, to measure 2.45 MeV deuterium-deuterium fusion neutrons through the {sup 115}In(n,n'){sup 115m} In reaction. Outside the chamber, zirconium and copper are used to measure 14 MeV deuterium-tritium fusion neutrons via {sup 90}Zr(n,2n), {sup 63}Cu(n,2n), and {sup 65}Cu(n,2n) reactions. An array of 16 zirconium samples are located on port covers around the chamber to measure relative yield anisotropies, providing a global map of fuel areal density variation. Neutron yields are routinely measured with activation to an accuracy of 7% and are in excellent agreement both with each other and with neutron time-of-flight and magnetic recoil spectrometer measurements. Relative areal density anisotropies can be measured to a precision of less than 3%. These measurements reveal apparent bulk fuel velocities as high as 200 km/s in addition to large areal density variations between the pole and equator of the compressed fuel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Post-growth surface smoothing of thin films of diindenoperylene

We applied in situ x-ray reflectivity and ultraviolet photoelectron spectroscopy to study the impact of annealing on low temperature (200 K) deposited organic thin films of diindenoperylene (DIP) on SiO{sub 2} and indium tin oxide (ITO). At 200 K, DIP is crystalline on SiO{sub 2} and amorphous on ITO. Upon heating to room temperature, the roughness of DIP is reduced on both substrates, from 1.5 nm to 0.75 nm (SiO{sub 2}) and from 0.90 nm to 0.45 nm (ITO). The smoothing is accompanied by crystallization of the surface molecules, whereas the bulk structure of the films does not strongly reorganize.

36 MATERIALS SCIENCE↗

Disorder-free sputtering method on graphene

Deposition of various materials onto graphene without causing any disorder is highly desirable for graphene applications. Especially, sputtering is a versatile technique to deposit various metals and insulators for spintronics, and indium tin oxide to make transparent devices. However, the sputtering process causes damage to graphene because of high energy sputtered atoms. By flipping the substrate and using a high Ar pressure, we demonstrate that the level of damage to graphene can be reduced or eliminated in dc, rf, and reactive sputtering processes.

36 MATERIALS SCIENCE↗

Mg acceptor doping of In{sub 2}O{sub 3} and overcompensation by oxygen vacancies

Mg-doped indium oxide (In{sub 2}O{sub 3}) thin films were grown by plasma-assisted molecular beam epitaxy with Mg-concentrations ranging from 10{sup 17} to 6 Multiplication-Sign 10{sup 20} cm{sup -3}. In this concentration range Mg was incorporated into In{sub 2}O{sub 3} without discernable impediment nor formation of secondary phases. Despite the role of Mg as acceptor, the films were n-type conductive in the as-grown state or after annealing in vacuum. For Mg-concentrations well in excess of the unintentional donor concentration annealing in oxygen resulted in semi-insulating films without detectable p-type conductivity. These results strongly suggest oxygen vacancies to act as shallow donors in In{sub 2}O{sub 3} that can overcompensate the Mg acceptors.

36 MATERIALS SCIENCE↗

Control of normal and abnormal bipolar resistive switching by interface junction on In/Nb:SrTiO{sub 3} interface

The resistive switching behaviors of indium (In)/Nb:SrTiO{sub 3} (NSTO) with different metal/semiconductor contacts are investigated. The In electrodes with the Schottky contacts are fabricated on NSTO surface using direct current reactive magnetron sputtering, and the fresh In is directly pressed to form the Ohmic contact. The device with one Schottky barrier displays a normal bipolar resistive switching (BRS) behavior, while the device with two Schottky barriers shows an abnormal BRS behavior. The results demonstrate that the injection and trapping or detrapping of carriers near the interface between the metal electrode and semiconductor are closely related to the resistive switching performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of interfacial lattice mismatch on bulk carrier concentration and band gap of InN

The issue of ambiguous values of the band gap (0.6 to 2 eV) of InN thin film in literature has been addressed by a careful experiment. We have grown wurtzite InN films by PA-MBE simultaneously on differently modified c-plane sapphire substrates and characterized by complementary structural and chemical probes. Our studies discount Mie resonances caused by metallic In segregation at grain boundaries as the reason for low band gap values ( Almost-Equal-To 0.6 eV) and also the formation of Indium oxides and oxynitrides as the cause for high band gap value ( Almost-Equal-To 2.0 eV). It is observed that polycrystallinity arising from azimuthal miss-orientation of c-oriented wurtzite InN crystals increases the carrier concentration and the band gap values. We have reviewed the band gap, carrier concentration, and effective mass of InN in literature and our own measurements, which show that the Moss-Burstein relation with a non-parabolic conduction band accounts for the observed variation of band gap with carrier concentration.

36 MATERIALS SCIENCE↗

Single crystal of LiInSe{sub 2} semiconductor for neutron detector

Single crystals of semiconductor-grade lithium indium selenide (LiInSe{sub 2}) were grown using the vertical Bridgman method. The orthorhombic structure of the materials was verified using powder x-ray diffraction. The room temperature band gap of the crystal was found to be 2.85 eV using optical absorption measurements. Resistivity of LiInSe{sub 2}, obtained using current-voltage measurements, has semiconducting nature (decreases with increasing temperature) and is in order of 10{sup 10}{Omega}{center_dot}cm. Photoconductivity measurement showed the photocurrent peak at 445 nm. Nuclear radiation devices were fabricated, and alpha particle detection was observed, suggesting that this material could be a candidate for neutron detection applications.

36 MATERIALS SCIENCE↗

Defect assistant band alignment transition from staggered to broken gap in mixed As/Sb tunnel field effect transistor heterostructure

The compositional dependence of effective tunneling barrier height (E{sub beff}) and defect assisted band alignment transition from staggered gap to broken gap in GaAsSb/InGaAs n-channel tunnel field effect transistor (TFET) structures were demonstrated by x-ray photoelectron spectroscopy (XPS). High-resolution x-ray diffraction measurements revealed that the active layers are internally lattice matched. The evolution of defect properties was evaluated using cross-sectional transmission electron microscopy. The defect density at the source/channel heterointerface was controlled by changing the interface properties during growth. By increasing indium (In) and antimony (Sb) alloy compositions from 65% to 70% in In{sub x}Ga{sub 1-x}As and 60% to 65% in GaAs{sub 1-y}Sb{sub y} layers, the E{sub beff} was reduced from 0.30 eV to 0.21 eV, respectively, with the low defect density at the source/channel heterointerface. The transfer characteristics of the fabricated TFET device with an E{sub beff} of 0.21 eV show 2 Multiplication-Sign improvement in ON-state current compared to the device with E{sub beff} of 0.30 eV. On contrary, the value of E{sub beff} was decreased from 0.21 eV to -0.03 eV due to the presence of high defect density at the GaAs{sub 0.35}Sb{sub 0.65}/In{sub 0.7}Ga{sub 0.3}As heterointerface. As a result, the band alignment was converted from staggered gap to broken gap, which leads to 4 orders of magnitude increase in OFF-state leakage current. Therefore, a high quality source/channel interface with a properly selected E{sub beff} and well maintained low defect density is necessary to obtain both high ON-state current and low OFF-state leakage in a mixed As/Sb TFET structure for high-performance and lower-power logic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗