Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INCUBATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Protection and enrichment: how two different carbonaceous biofilm supports improve methane yield from encapsulated anaerobic microorganisms

Encapsulating anaerobic microorganisms allows for the separation of the solids retention time from the hydraulic retention time during anaerobic wastewater treatment. The harsh chemistries involved in the process of encapsulation can have adverse effects on microorganisms for anaerobic digestion, especially methanogens, and can lead to lower methane yields after encapsulation. Improving the survival and maintaining activity of anaerobic communities during encapsulation will likely be the key to improving methane yield. In this study, we investigated the encapsulation of biomass grown as biofilms on two carbonaceous materials, biochar and powdered activated carbon (PAC), to improve methane yield. Microorganisms grown as biofilms on biochar and PAC were encapsulated in polyethylene glycol (PEG) and incubated for 10 days. After 10 days, the unamended control capsules produced 81.6 ± 5.4 μmol of methane, while PAC-amended capsules produced 129.8 ± 1.9 μmol and biochar-amended capsules produced 432.96 ± 20.8 μmol methane, with the differences being statistically significant (p < 0.05). In biochar, a higher relative abundance of methanogens led to increased methane production capacity. The ratio of the methyl coenzyme M reductase (mcrA) genes to total 16S rRNA genes in the encapsulated biochar-supported biofilms was significantly higher than that in the encapsulated unsupported (p = 4.9 × 10 −5 ) and the PAC-supported biofilms (p = 0.012). Biochar-supported biofilms also had higher methane output per mcrA or 16S rRNA gene copy number. For the PAC, biofilms were protected from ammonium persulfate (APS), a powerful oxidant used in the encapsulation process. PAC removed 92% of dissolved APS, reducing exposure of the methanogens to this chemical. Unfortunately, this removal of APS compromised capsule stability, limiting the amount of PAC that could be added to the capsules. Furthermore, amendments that improve survival and activity of methanogens should be used in the capsules instead of those that protect methanogens by interfering with encapsulant polymerization chemistry.

Resource recovery↗

The oxidation of dehydroascorbic acid and 2,3-diketogulonate by distinct reactive oxygen species

l -Ascorbate, dehydro- l -ascorbic acid (DHA), and 2,3-diketo- l -gulonate (DKG) can all quench reactive oxygen species (ROS) in plants and animals. The vitamin C oxidation products thereby formed are investigated here. DHA and DKG were incubated aerobically at pH 4.7 with peroxide (H 2 O 2 ), ‘superoxide’ (a ~50:50 mixture of O 2 and HO 2 ), hydroxyl radicals ( • OH, formed in Fenton mixtures), and illuminated riboflavin (generating singlet oxygen, 1 O 2 ). Products were monitored electrophoretically. DHA quenched H 2 O 2 far more effectively than superoxide, but the main products in both cases were 4- O -oxalyl- l -threonate (4-OxT) and smaller amounts of 3-OxT and OxA + threonate. H 2 O 2 , but not superoxide, also yielded cyclic-OxT. Dilute Fenton mixture almost completely oxidised a 50-fold excess of DHA, indicating that it generated oxidant(s) greatly exceeding the theoretical • OH yield; it yielded oxalate, threonate, and OxT. 1 O 2 had no effect on DHA. DKG was oxidatively decarboxylated by H 2 O 2 , Fenton mixture, and 1 O 2 , forming a newly characterised product, 2-oxo- l - threo -pentonate (OTP; ‘2-keto- l -xylonate’). Superoxide yielded negligible OTP. Prolonged H 2 O 2 treatment oxidatively decarboxylated OTP to threonate. Oxidation of DKG by H 2 O 2 , Fenton mixture, or 1 O 2 also gave traces of 4-OxT but no detectable 3-OxT or cyclic-OxT. In conclusion, DHA and DKG yield different oxidation products when attacked by different ROS. DHA is more readily oxidised by H 2 O 2 and superoxide; DKG more readily by 1 O 2 . The diverse products are potential signals, enabling organisms to respond appropriately to diverse stresses. Also, the reaction-product ‘fingerprints’ are analytically useful, indicating which ROS are acting in vivo .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biocompatible core-shell magnetic nanoparticles for cancer treatment

Non-toxic magnetic nanoparticles (MNPs) have expanded the treatment delivery options in the medical world. With a size range from 2 to 200 nm MNPs can be compiled with most of the small cells and tissues in living body. Monodispersive iron-iron oxide core shell nanoparticles were prepared in our novel cluster deposition system. This unique method of preparing the core shell MNPs gives nanoparticles very high magnetic moment. We tested the nontoxicity and uptake of MNPs coated with/without dextrin by incubating them with rat LX-1 small cell lung cancer cells (SCLC). Since core iron enhances the heating effect [7] the rate of oxidation of iron nanoparticles was tested in deionized water at certain time interval. Both coated and noncoated MNPs were successfully uptaken by the cells, indicating that the nanoparticles were not toxic. The stability of MNPs was verified by X-ray diffraction (XRD) scan after 0, 24, 48, 96, 204 hours. Due to the high magnetic moment offered by MNPs produced in our lab, we predict that even in low applied external alternating field desired temperature can be reached in cancer cells in comparison to the commercially available nanoparticles. Moreover, our MNPs do not require additional anti-coagulating agents and provide a cost effective means of treatment with significantly lower dosage in the body in comparison to commercially available nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗

Nucleation mechanism of gallium-assisted molecular beam epitaxy growth of gallium arsenide nanowires

Molecular beam epitaxy Ga-assisted synthesis of GaAs nanowires is demonstrated. The nucleation and growth are seen to be related to the presence of a SiO{sub 2} layer previously deposited on the GaAs wafer. The interaction of the reactive gallium with the SiO{sub 2} pinholes induces the formation of nanocraters, found to be the key for the nucleation of the nanowires. With SiO{sub 2} thicknesses up to 30 nm, nanocraters reach the underlying substrate, resulting into a preferential growth orientation of the nanowires. Possibly related to the formation of nanocraters, we observe an incubation period of 258 s before the nanowires growth is initiated.

36 MATERIALS SCIENCE↗

Plasma/ion-controlled metal catalyst saturation: Enabling simultaneous growth of carbon nanotube/nanocone arrays

It is shown that the simultaneous saturation of Ni nanoparticles used as catalyst for vertically aligned carbon nanotube and nanocone arrays can be improved in low-temperature plasma- or ion-assisted processes compared with neutral gas-based routes. The results of hybrid multiscale numerical simulations of the catalyst nanoarrays (particle sizes of 2 and 10 nm) saturation with carbon show the possibility of reducing the difference in catalyst incubation times for smallest and largest catalyst particles by up to a factor of 2. This approach is generic and provides process conditions for simultaneous nucleation and growth of uniform arrays of vertically aligned nanostructures.

36 MATERIALS SCIENCE↗

Femtosecond laser and swift-ion damage in lithium niobate: A comparative analysis

Relevant damage features associated with femtosecond pulse laser and swift-ion irradiations on LiNbO{sub 3} crystals are comparatively discussed. Experiments described in this paper include irradiations with repetitive femtosecond-laser pulses (800 nm, 130 fs) and irradiation with O, F, Si, and Cl ions at energies in the range of 0.2-1 MeV/amu where electronic stopping power is dominant. Data are semiquantitatively discussed by using a two-step phenomenological scheme. The first step corresponds to massive electronic excitation either by photons (primarily three-photon absorption) or ions (via ion-electron collisions) leading to a dense electron-hole plasma. The second step involves the relaxation of the stored excitation energy causing bond breaking and defect generation. It is described at a phenomenological level within a unified thermal spike scheme previously developed to account for damage by swift ions. A key common feature for the two irradiation sources is a well-defined intrinsic threshold in the deposited energy density U{sub th} required to initiate observable damage in a pristine crystal: U{sub th}{approx_equal}1.3x10{sup 4}-2x10{sup 4} J/cm{sup 3} for amorphization in the case of ions and U{sub th}{approx_equal}7x10{sup 4} J/cm{sup 3} for ablation in the case of laser pulses. The morphology of the heavily damaged regions (ion-induced tracks and laser-induced craters) generated above threshold and its evolution with the deposited energy are also comparatively discussed. The data show that damage in both types of experiments is cumulative and increases on successive irradiations. As a consequence, a certain incubation energy density has to be delivered either by the ions or laser photons in order to start observable damage under subthreshold conditions. The parallelism between the effects of laser pulses and ion impacts is well appreciated when they are described in terms of the ratio between the deposited energy density and the corresponding threshold value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct photoetching of polymers using radiation of high energy density from a table-top extreme ultraviolet plasma source

In order to perform material interaction studies with intense extreme ultraviolet (EUV) radiation, a Schwarzschild mirror objective coated with Mo/Si multilayers was adapted to a compact laser-driven EUV plasma source utilizing a solid Au target. By 10x demagnified imaging of the plasma a maximum pulse energy density of {approx}0.73 J/cm{sup 2} at a wavelength of 13.5 nm can be achieved in the image plane of the objective at a pulse duration of 8.8 ns. In this paper we present EUV photoetching rates measured for polymethyl methacrylate, polycarbonate, and polytetrafluoroethylene at various fluence levels. A linear dependence between etch depth and applied EUV pulse number could be observed without the necessity for any incubation pulses. By evaluating the slope of these data, etch rates were determined, revealing also a linear behavior for low fluences. A threshold energy density could not be observed. The slope of the linear etch regime as well as deviations from the linear trend at higher energy densities are discussed and compared to data known from deep UV laser ablation. Furthermore, the surface roughness of the structured polymers was measured by atomic force microscopy and compared to the nonirradiated polymer surface, indicating a rather smooth etch process (roughness increase of 20%-30%). The different shapes of the etch craters observed for the three polymers at high energy densities can be explained by the measured fluence dependence of the etch rates, having consequences for the proper use of polymer ablation for beam profiling of focused EUV radiation.

36 MATERIALS SCIENCE↗

Facile biosynthesis of phosphate capped gold nanoparticles by a bacterial isolate Stenotrophomonas maltophilia

We report intracellular biosynthesis of gold nanoparticles (GNPs) by a strain Stenotrophomonas maltophilia (AuRed02) isolated from the soil samples of Singhbhum gold mines, India. An aqueous solution of gold chloride was reduced to metallic gold in a suspension of disrupted cell mass of AuRed02, which progressively turns into cherry red within 8 h of incubation at 25 deg. C. The optical spectrum showed the plasmon resonance at 530 nm and analysis by transmission electron microscopy and dynamic light scattering confirmed the formation of around 40 nm GNPs. Zeta potential and Fourier transform infrared measurements confirmed GNPs are capped by negatively charged phosphate groups of NADP.

36 MATERIALS SCIENCE↗

200 MeV silver ion irradiation induced structural modification in YBa{sub 2}Cu{sub 3}O{sub 7-y} thin films at 89 K: An in situ x-ray diffraction study

We report in situ x-ray diffraction (XRD) study of 200 MeV Ag ion irradiation induced structural modification in c-axis oriented YBa{sub 2}Cu{sub 3}O{sub 7-y} (YBCO) thin films at 89 K. The films remained c-axis oriented up to a fluence of 2x10{sup 13} ions cm{sup -2}, where complete amorphization sets in. The amorphous ion tracks, the strained region around these tracks, and irradiation induced point defects are shown to control the evolution of the structure with ion fluence. Secondary electrons emanating from the ion paths are shown to create point defects in a cylindrical region of 97 nm radius, which corresponds to their maximum range in the YBCO medium. The point defects are created exclusively in the CuO basal planes of fully oxygenated YBCO, which has not been possible, by other techniques including low energy ion irradiation and thermal quenching. The point defects led to a faster decrease in the integral intensity of XRD peaks at very low fluences of irradiation (PHI<=3x10{sup 10} ions cm{sup -2}) than what can be expected from amorphous tracks. The radius of amorphous ion tracks, estimated from the fluence dependence of integral XRD peak intensity beyond this fluence, was found to be 1.9 nm. Both point defect and the strained region around amorphous ion tracks are shown to contribute to the increase in the c-parameter at 89 K. The full width at half maximum (FWHM) of XRD peaks arising mostly due to the strained region around the ion tracks showed an incubation effect up to 10{sup 12} ions cm{sup -2}, before increasing at higher fluences. Fluence dependence of FWHM gives the cross section of the strained region as 37.9 nm{sup 2}, which is more than three times the cross section of the amorphous ion tracks.

36 MATERIALS SCIENCE↗

Adhesion Peptide Immobilization on Electrospun Polymers: a Photoelectron Spectroscopy Study

The immobilization of an oligopeptide, mimicking the adhesion sequence of fibronectin, on the surface of polymer films prepared by electrospinning was investigated by XPS spectroscopy. Films of polycaprolactone (PCL) and poly(l-lactide-caprolactone)[P(LLA-CL)] were prepared by electrospinning onto aluminium substrates. A modified adhesion peptide containing a photoreactive group was immobilized on the surface of the polymer nanofibers by incubation in peptide solution and subsequent UV irradiation. XPS analysis yield evidence of successful peptide immobilization on the polymer surface; the amount of immobilized peptide increases with the concentration of the mother solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Characterization, and Preliminary Investigation of Cell Interaction of Magnetic Nanoparticles with Catechol-Containing Shells

Superparamagnetic iron oxide cores were synthesized by co-precipitation of Fe(II) and Fe(III) salts and subsequently stabilized by coating with different catechols (levodopa, dopamine, hydrocaffeic acid, dopamine-containing carboxymethyl dextran) known to act as high-affinity, bidentate ligands for Fe(III). The prepared stable magnetic fluids were characterized with regard to their chemical composition (content of iron and shell material, Fe(II)/Fe(III) ratio) and their physical properties (size, surface charge, magnetic parameters). The nanoparticles showed no or only slight cytotoxic effects within 1 and 4 days of incubation with 3T3 fibroblast cells. Preliminary experiments were performed to study the interaction of the prepared nanoparticles with human MCF-7 breast cancer cells and leukocytes. An intense interaction of the MCF-7 cells with these particles was found whereas the leukocytes showed a lower tendency of interaction. Based on these finding, the novel magnetic nanoparticles possess the potential for use in depletion of tumor cells from peripheral blood.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoplastic deformation of silicon surfaces induced by ultrashort pulsed lasers in submelting conditions

A hybrid theoretical model is presented to describe thermoplastic deformation effects on silicon surfaces induced by single and multiple ultrashort pulsed laser irradiation in submelting conditions. An approximation of the Boltzmann transport equation is adopted to describe the laser irradiation process. The evolution of the induced deformation field is described initially by adopting the differential equations of dynamic thermoelasticity while the onset of plastic yielding is described by the von Mises stress. Details of the resulting picometre sized crater, produced by irradiation with a single pulse, are discussed as a function of the imposed conditions and thresholds for the onset of plasticity are computed. Irradiation with multiple pulses leads to ripple formation of nanometre size that originates from the interference of the incident and a surface scattered wave. It is suggested that ultrafast laser induced surface modification in semiconductors is feasible in submelting conditions, and it may act as a precursor of the incubation effects observed at multiple pulse irradiation of materials surfaces.

36 MATERIALS SCIENCE↗

Femtosecond laser fabrication of micro and nano-disks in single layer graphene using vortex Bessel beams

We report the fabrication of micro and nano-disks in single layer chemical vapor deposition graphene on glass substrate using femtosecond laser ablation with vortex Bessel beams. The fabricated graphene disks with diameters ranging from 650 nm to 4 μm were characterized by spatially resolved micro-Raman spectroscopy. The variation of ablation threshold was investigated as a function of the number of pulses showing an incubation effect. A very high degree of size control of the fabricated graphene disks is enabled using a sequence of femtosecond pulses with different vortex orders.

36 MATERIALS SCIENCE↗

Biomimetic synthesis of modified calcium phosphate fine powders and their in vitro studies

Biomimetic approach and subsequent high-temperature treatment were used to synthesize ion modified calcium phosphate fine powders. Thus, using Simulated Body Fluid (SBF) as an ion modifier, a bi-phase mixture of ion modified β-tricalcium phosphate and hydroxyapatite (β-TCP + HA) was prepared. The use of SBF electrolyte solution enriched with Mg{sup 2+} or Zn{sup 2+} yielded monophase β-tricalcium phosphate additionally modified with Mg{sup 2+} or Zn{sup 2+} (Mg-β-TCP or Zn-β-TCP). The in vitro behavior of the prepared powders on cell viability and proliferation of murine BALB/c 3T3 fibroblasts and of human Lep 3 cells was studied by MTT test assays and Mosmann method after 72 h incubation. The relative cell viability was calculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel facility for 3D micro-irradiation of living cells in a controlled environment by MeV ions

We present a novel facility for micro-irradiation of living targets with ions from a 1.7 MV tandem accelerator. We show results using 1 MeV protons and 2 MeV He{sup 2+}. In contrast to common micro-irradiation facilities, which use electromagnetic or electrostatic focusing and specially designed vacuum windows, we employ a tapered glass capillary with a thin end window, made from polystyrene with a thickness of 1–2 μm, for ion focusing and extraction. The capillary is connected to a beamline tilted vertically by 45°, which allows for easy immersion of the extracted ions into liquid environment within a standard cell culture dish. An inverted microscope is used for simultaneously observing the samples as well as the capillary tip, while a stage-top incubator provides an appropriate environment for the samples. Furthermore, our setup allows to target volumes in cells within a μm{sup 3} resolution, while monitoring the target in real time during and after irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Biodegradation test of SPS-LS blends as polymer electrolyte membrane fuel cells

Sulfonated polystyrene (SPS) can be applied as a proton exchange membrane fuel cell due to its fairly good chemical stability. In order to be applied as polymer electrolyte membrane fuel cells (PEMFCs), membrane polymer should have a good ionic conductivity, high proton conductivity, and high mechanical strength. Lignosulfonate (LS) is a complex biopolymer which has crosslinks and sulfonate groups. SPS-LS blends with addition of SiO{sub 2} are used to increase the proton conductivity and to improve the mechanical properties and thermal stability. However, the biodegradation test of SPS-LS blends is required to determine whether the application of these membranes to be applied as an environmentally friendly membrane. In this study, had been done the synthesis of SPS, biodegradability test of SPS-LS blends with variations of LS and SiO{sub 2} compositions. The biodegradation test was carried out in solid medium of Luria Bertani (LB) with an activated sludge used as a source of microorganism at incubation temperature of 37°C. Based on the results obtained indicated that SPS-LS-SiO{sub 2} blends are more decomposed by microorganism than SPS-LS blends. This result is supported by analysis of weight reduction percentage, functional groups with Fourier Transform Infrared (FTIR) Spectroscopy, and morphological surface with Scanning Electron Microscopy (SEM)

36 MATERIALS SCIENCE↗

Microstructure, impurity and metal cap effects on Cu electromigration

Electromigration (EM) lifetimes and void growth of pure Cu, Cu(Mn) alloy, and pure Cu damascene lines with a CoWP cap were measured as a function of grain structure (bamboo, near bamboo, and polycrystalline) and sample temperature. The bamboo grains in a bamboo-polycrystalline grained line play the key role in reducing Cu mass flow. The variation in Cu grain size distribution among the wafers was achieved by varying the metal line height and wafer annealing process step after electroplating Cu and before or after chemical mechanical polishing. The Cu grain size was found to have a large impact on Cu EM lifetime and activation energy, especially for the lines capped with CoWP. The EM activation energy for pure Cu with a CoWP cap from near-bamboo, bamboo-polycrystalline, mostly polycrystalline to polycrystalline only line grain structures was reduced from 2.2 ± 0.2 eV, to 1.7 ± 0.1 eV, to 1.5 ± 0.1 eV, to 0.72 ± 0.05 eV, respectively. The effect of Mn in Cu grain boundary diffusion was found to be dependent on Mn concentration in Cu. The depletion of Cu at the cathode end of the Cu(Mn) line is preceded by an incubation period. Unlike pure Cu lines with void growth at the cathode end and hillocks at the anode end of the line, the hillocks grew at a starting position roughly equal to the Blech critical length from the cathode end of the Cu(Mn) polycrystalline line. The effectiveness of Mn on Cu grain boundary migration can also be qualitatively accounted for by a simple trapping model. The free migration of Cu atoms at grain boundaries is reduced by the presence of Mn due to Cu-solute binding. A large binding energy of 0.5 ± 0.1 eV was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled epitaxial growth of mesoporous silica/gold nanorod nanolollipops and nanodumb-bells

In this work, we describe the controlled synthesis of novel heterogeneous nanostructures comprised of mesoporous silica-coated gold nanorods (MSGNRs) in the form of core–shell nanolollipops and nanodumb-bells, using a seed-mediated sol–gel method. Although MSGNR core–shell (θ-MSGNR) structures have been reported previously by us and others, we herein discuss the first ever fabrication of MSGNR nanolollipops (φ-MSGNR) and nanodumb-bells (β-MSGNR), achieved by simply controlling the aging time of gold nanorods (GNRs), the residual cetyltrimethylammonium bromide (CTAB) coating of GNRs, and the addition of dimethyl formamide during incubation, centrifugation, and sonication, respectively. Transmission electron microscopy revealed two bare GNR isoforms, with aspect ratios of approximately 4 and 6, while scanning electron microscopy was used to further elucidate the morphology of φ-MSGNR and β-MSGNR heterostructures. In agreement with the smaller dielectric constants afforded by incomplete silica encasement, spectroscopic studies of φ-MSGNR and β-MSGNR, surface plasmon resonance (SPR) bands revealed 20-40 nm blue shifts relative to the SPR of θ-MSGNR. On the basis of the attributes and applications of more conventional θ-MSGNRs, φ-MSGNRs and β-MSGNRs are anticipated to provide most of the utility of θ-MSGNRs, but with the additional functionalities that accompany their incorporation of both bare gold and mesoporous silica encased tips; with significant/unique implications for biomedical and catalytic applications.

36 MATERIALS SCIENCE↗