Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hubbard Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Evolution and infrared spectra of brown dwarfs

Self-consistent models are constructed for the structure, evolution, and observable properties of degenerately cooling objects, or 'brown dwarfs'. Model atmospheres composed of a range of likely gaseous and particulate opacity sources are calculated in order to provide a boundary condition for interior temperature-pressure profiles and to determine the emergent spectra for such objects. The radius derived from the interior models is combined with the emergent fluxes calculated from the atmosphere model to fit the data of McCarthy, Probst, and Low (1985) and to derive the luminosity and mass of VB 8B. The latter is found to be most probably an 0.05 solar mass object with effective temperature in the 1200-1500 K range and an atmosphere which very likely contains particulate absorbers. Key changes in chemical oxidation state and condensation of major constituents during the evolution of brown dwarfs are presented.

Lunine, Jonathan I.↗

Results from a Si(Li) gamma ray detector stack for future Mars missions

We present Monte Carlo analysis and experimental data from a novel lithium-drifted silicon detector stack for gamma ray spectroscopy instrumentation in future Mars surface landers and other planetary missions. The Monte Carlo analysis shows full energy photopeaks even in the range of about 100 keV to 2 MeV where, in Si, Compton scattering dominates the absorption processes. Laboratory data is shown for an experimental detector stack of four planar Si(Li) devices, each 5 mm thick with an active area 2 cm in diameter. All the experimental data were collected with maximum temperature of the stack at 175 K. Background reduction is achieved by using the detector of the stack closest to the source in anticoincidence. We present a comparison of experimental data from the stack with the Monte Carlo model for Cs-137 (662 keV). Agreement is shown to be good, with a full energy photopeak clearly seen (FWHM about 10 keV). Experimental stack data is also shown for multiple peaks at 511 keV (Na-22) and 662 keV (Cs-137). The peaks are clearly resolved (FWHM 10 keV), and are compared with the results obtained using a 8 percent resolution, 3 in. x 3 in. NaI(TI) device (FWHM about 50 keV).

Hubbard, G. S.↗

Some Effects of Frequency on the Contribution of a Vertical Tail to the Free Aerodynamic Damping of a Model Oscillating in Yaw

The damping in yaw and the directional stability of a model freely oscillating in yaw were measured tail-off and tail-on and compared with the values obtained by theoretical consideration of the unsteady lift associated with an oscillating vertical tail. A range of low frequencies comparable to those of the lateral motions of airplanes was covered. The analysis includes the effects of vertical-tail aspect ratio and the two-dimensional effects of compressibility.

Bird, John D↗

Structure of scintillations in Neptune's occultation shadow

An exceptionally high-quality data set from a Neptune occultation is used here to derive a number of new results about the statistical properties of the fluctuations of the intensity distribution in various parts of Neptune's occultation shadow. An approximate numerical ray-tracing model which successfully accounts for many of the qualitative aspects of the observed intensity fluctuation distribution is introduced. Strong refractive scintillation is simulated by including the effects of 'turbulence' with projected atmospheric properties allowed to vary in both the direction perpendicular and parallel to the limb, and an explicit two-dimensional picture of a typical intensity distribution throughout an occulting planet's shadow is presented. The results confirm the existence of highly anisotropic turbulence.

Hubbard, W. B.↗

On the ρ * scaling of intrinsic rotation in C-Mod plasmas with edge transport barriers

Here, changes in the core intrinsic toroidal rotation velocity following L- to H- and L- to I-mode transitions have been investigated in Alcator C-Mod tokamak plasmas. The magnitude of the co-current rotation increments is found to increase with the pedestal temperature gradient and $q_{95}$ , and to decrease with toroidal magnetic field. These results are captured quantitatively by a model of fluctuation entropy balance which gives the Mach number $M_i \cong \rho _*/2 L_s/L_T \sim \nabla T q_{95}/B_{T}$ in an ITG turbulence dominant regime. The agreement between experiment and theory gives confidence for extrapolation to future devices in similar operational regimes. Core thermal Mach numbers of ~0.07 and ~0.2 are expected for ITER and ARC, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics and performance of the I-mode regime over an expanded operating space on Alcator C-Mod

New results on the I-mode regime of operation on the Alcator C-Mod tokamak are reported. This ELM-free regime features high energy confinement and a steep temperature pedestal, while particle confinement remains at L-mode levels, giving stationary density and avoiding impurity accumulation. I-mode has now been obtained over nearly all of the magnetic fields and currents possible in this high field tokamak (I p 0.55–1.7 MA, B T 2.8–8 T) using a configuration with B × ∇B drift away from the X-point. Results at 8 T confirm that the L–I power threshold varies only weakly with B T , and that the power range for I-mode increases with B T ; no 8 T discharges transitioned to H-mode. Parameter dependences of energy confinement are investigated. Core transport simulations are giving insight into the observed turbulence reduction, profile stiffness and confinement improvement. Pedestal models explain the observed stability to ELMs, and can simulate the observed weakly coherent mode. Conditions for I–H transitions have complex dependences on density as well as power. I-modes have now been maintained in near-DN configurations, leading to improved divertor power flux sharing. Overall, prospects for I-mode on future fusion devices such as ITER and ARC are encouraging. Further experiments on other tokamaks are needed to improve confidence in extrapolation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of the Jovian oblateness on Pioneer 10/11 radio occultations

The oblateness of Jupiter, which was neglected in the standard inversion technique for radio occultation data, has a substantial effect on the refractivity profiles of the neutral Jovian atmosphere derived from the Pioneer 10/11 occultations. The geometry of the Pioneer 10 entry and exit occultations has the effect that oblateness should account for much of the discrepancy of the results with plausible atmospheric models. The effect of the oblateness on Pioneer 11 entry is smaller, where much of the discrepancy could be due to other effects, such as cycle-slip in the spacecraft transponder. Theory indicates that the Pioneer 11 exit occultation should be affected by the oblateness in the opposite sense from the first three occultations; and, indeed, the data which had not been invertible under the spherical assumption produced reasonable results when an oblateness correction was applied.

Hubbard, W. B.↗

Time-lapse 3-D electrical resistance tomography inversion for crosswell monitoring of dissolved and supercritical CO 2 flow at two field sites: Escatawpa and Cranfield, Mississippi, USA

In this study, we advance the understanding of three-dimensional (3-D) electrical resistivity tomography (ERT) for monitoring long-term CO 2 storage by analyzing two previously published field time-lapse data sets. We address two important aspects of ERT inversion-the issue of resolution decay, a general impediment to the ERT method, and the issue of potentially misleading imaging artifacts due to 2-D model assumptions. The first study analyzes data from a shallow dissolved-CO 2 injection experiment near Escatawpa (Mississippi), where ERT data were collected in a 3-D crosswell configuration. Here, we apply a focusing approach designed for crosswell configurations to counteract resolution loss in the inter-wellbore area, with synthetic studies demonstrating its effectiveness. The 3-D field data analysis reveals an initially southwards-trending flow path development and a dispersing plume development in the downgradient inter-well region. The second data set was collected during a deep (over 3 km) injection of supercritical CO 2 near Cranfield (Mississippi). Comparative 2-D and 3-D inversions reveal the projection of off-planar anomalies onto the cross-section, a typical artifact introduced by 2-D model assumptions. Conforming 3-D images from two different algorithms support earlier hydrological investigations, indicating a conduit system where flow velocity variations lead to a circumvention of a close observation well and an onset of increased CO 2 saturation downgradient from this well. We relate lateral permeability variations indicated by an independently obtained hydrological analysis to this consistently observed pattern in the CO 2 spatial plume evolution.

3-D inversion↗

Visual Data Analysis as an Integral Part of Environmental Management

The U.S. Department of Energy's (DOE) Office of Environmental Management (DOE/EM) currently supports an effort to understand and predict contaminant fate and transport in natural and engineered systems. Geologists, hydrologists, physicists and computer scientists are working together to create models of existing contaminated sites and to simulate their behavior. Simulation results are verified based on historical data and extrapolated into the future. Visualization is used for model setup verification, visual analysis of high-performance computing simulation results, and uncertainty quantification. This article describes the challenges and solutions for visual data analysis, which impacts the decision-making process for each of the contaminated sites. Lessons learned from these simulations will also have an impact on deciding on treatment measures for other, similarly contaminated areas, including those affected by more recent events, such as Chernobyl and Fukushima.

Meyer, Joerg↗

Observations of Uranus occultation events

An analysis of photometric data obtained during the Uranus appulse to SAO 158687 shows three occultation events which appear to coincide with portions of the Uranian ring system. Two occultation events were associated with the alpha ring and one with the beta ring of the planet; the alpha ring event suggests a ring model with a random distribution of occulting bodies of about 1 km diameter, and an areal density of about 50% over a band 10 km wide. Calculations indicate that neither the inner nor outer rings of the planet are truly concentric circles (to within their radius). In addition, determination of the ring centers can be used to locate the center of mass of the planet, and an upper limit of 26,300 km can be assigned to its radius.

Hubbard, W. B.↗

The relationships between geology and soil chemistry at the Apollo 17 landing site

Within the wide compositional range of the Apollo 17 soils, three distinct chemical groups have been recognized, each one corresponding broadly with a major geological and physiographic unit. These groups are: (1) Valley Floor type soils, (2) South Massif type soils, and (3) North Massif type soils. The observed chemical variations within and between these three groups is interpreted by means of mixing models in terms of lateral transport and mixing of prevailing local rock types, such as high-titanium basalts, KREEP-like noritic breccias, anorthositic gabbro breccias and orange glass. According to these models, North Nassif types evolved on the lower slopes of the North Massif and Sculptured Hills where anorthositic gabbro predominates over noritic breccia and where lateral mixing with basalt is effective, whereas the South Massif type soils originally developed on the upper slopes of the South Massif, where anorthositic breccia and noritic breccias are equally abundant, and where lateral mixing with basalt was minimal.

Rhodes, J. M.↗

Effects of differential rotation on the gravitational figures of Jupiter and Saturn

It is assumed that observed zonal currents in the atmospheres of Jupiter and Saturn correspond to a state of permanent rotation, and that the angular velocity is constant on cylindrical surfaces parallel to the rotation axis. The equation of hydrostatic equilibrium for a rotating planet is solved under these restrictive assumptions, and the effect of the hypothesized rotation state on the planet's gravity harmonics and external shape is investigated. Spacecraft data on zonal currents are used to derive nearly model-independent corrections to the first four zonal gravity harmonic coefficients, which can be used to correct observed gravity harmonics to values appropriate for solid-body rotation. If the assumed rotation state is applicable, then zonal currents lead to measurable topography of isopycnic surfaces with respect to the reference figure defined by the magnetospheric rotation period and the gravity harmonics. The amplitude of the topography is on the order of 5 km for Jupiter and 60 km for Saturn.

Hubbard, W. B.↗

Estimating Permafrost Distribution Using Co‐Located Temperature and Electrical Resistivity Measurements

Abstract Assessing the lateral and vertical extent of permafrost is critical to understanding the fate of Arctic ecosystems under climate change. Yet, direct measurements of permafrost distribution and temperature are often limited to a small number of borehole locations. Here, we assess the use of co‐located shallow temperature and electrical resistivity tomography (ERT) measurements to estimate at high‐resolution the distribution of permafrost in three watersheds underlain by discontinuous permafrost. Synthetic modeling shows that co‐located temperature and ERT measurements allow for supervised classification schemes that provide 60% higher accuracy compared to unsupervised methods. Linking resistivity and size of the identified permafrost bodies to surface observations, we show that tall vegetation (>0.5 m) and gentle slopes (<15°) are related to warmer and smaller permafrost bodies, and a more frequent occurrence of taliks.

54 ENVIRONMENTAL SCIENCES↗

Attenuating Sulfidogenesis in a Soured Continuous Flow Column System With Perchlorate Treatment

Hydrogen sulfide production by sulfate reducing bacteria (SRB) is the primary cause of oil reservoir souring. Amending environments with chlorate or perchlorate [collectively denoted (per)chlorate] represents an emerging technology to prevent the onset of souring. Recent studies with perchlorate reducing bacteria (PRB) monocultures demonstrated that they have the innate capability to enzymatically oxidize sulfide, thus PRB may offer an effective means of reversing souring. (Per)chlorate may be effective by (i) direct toxicity to SRB; (ii) competitive exclusion of SRB by PRB; or (iii) reversal of souring through re-oxidation of sulfide by PRB. To determine if (per)chlorate could sweeten a soured column system and assign a quantitative value to each of the mechanisms we treated columns flooded with San Francisco bay water with temporally decreasing amounts (50, 25, and 12.5 mM) of (per)chlorate. Geochemistry and the microbial community structure were monitored and a reactive transport model was developed, Results were compared to columns treated with nitrate or untreated. Souring was reversed by all treatments at 50 mM but nitrate-treated columns began to re-sour when treatment concentrations decreased (25 mM). Re-souring was only observed in (per)chlorate-treated columns when concentrations were decreased to 12.5 mM and the extent of re-souring was less than the control columns. Microbial community analyses indicated treatment-specific community shifts. Nitrate treatment resulted in a distinct community enriched in genera known to perform sulfur cycling metabolisms and genera capable of nitrate reduction. (Per)chlorate treatment enriched for (per)chlorate reducing bacteria. (Per)chlorate treatments only enriched for sulfate reducing organisms when treatment levels were decreased. A reactive transport model of perchlorate treatment was developed and a baseline case simulation demonstrated that the model provided a good fit to the effluent geochemical data. Subsequent simulations teased out the relative role that each of the three perchlorate inhibition mechanisms played during different phases of the experiment. These results indicate that perchlorate addition is an effective strategy for both souring prevention and souring reversal. It provides insight into which organisms are involved, and illuminates the interactive effects of the inhibition mechanisms, further highlighting the versatility of perchlorate as a sweetening agent.

02 PETROLEUM↗

Neutron diffraction measurements and modeling of residual strains in metal matrix composites

Neutron diffraction measurements at room temperature are used to characterize the residual strains in tungsten fiber-reinforced copper matrix, tungsten fiber-reinforced Kanthal matrix, and diamond particulate-reinforced copper matrix composites. Results of finite element modeling are compared with the neutron diffraction data. In tungsten/Kanthal composites, the fibers are in compression, the matrix is in tension, and the thermal residual strains are a strong function of the volume fraction of fibers. In copper matrix composites, the matrix is in tension and the stresses are independent of the volume fraction of tungsten fibers or diamond particles and the assumed stress free temperature because of the low yield strength of the matrix phase.

Saigal, A.↗

Ion irradiation of electronic-type-separated single wall carbon nanotubes: A model for radiation effects in nanostructured carbon

The structural and electrical properties of electronic-type-separated (metallic and semiconducting) single wall carbon nanotube (SWCNT) thin-films have been investigated after irradiation with 150 keV {sup 11}B{sup +} and 150 keV {sup 31}P{sup +} with fluences ranging from 10{sup 12} to 10{sup 15} ions/cm{sup 2}. Raman spectroscopy results indicate that the ratio of the Raman D to G Prime band peak intensities (D/G Prime ) is a more sensitive indicator of SWCNT structural modification induced by ion irradiation by one order of magnitude compared to the ratio of the Raman D to G band peak intensities (D/G). The increase in sheet resistance (R{sub s}) of the thin-films follows a similar trend as the D/G Prime ratio, suggesting that the radiation induced variation in bulk electrical transport for both electronic-types is equal and related to localized defect generation. The characterization results for the various samples are compared based on the displacement damage dose (DDD) imparted to the sample, which is material and damage source independent. Therefore, it is possible to extend the analysis to include data from irradiation of transferred CVD-graphene films on SiO{sub 2}/Si substrates using 35 keV C{sup +} ions, and compare the observed changes at equivalent levels of ion irradiation-induced damage to that observed in the SWCNT thin-film samples. Ultimately, a model is developed for the prediction of the radiation response of nanostructured carbon materials based on the DDD for any incident ion with low-energy recoil spectra. The model is also related to the defect concentration, and subsequently the effective defect-to-defect length, and yields a maximum defect concentration (minimum defect-to-defect length) above which the bulk electrical transport properties in SWCNT thin-films and large graphene-based electronic devices rapidly degrade when exposed to harsh environments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Competing stripe and magnetic phases in the cuprates from first principles

Realistic description of competing phases in complex quantum materials has proven extremely challenging. For example, much of the existing density-functional-theory-based first-principles framework fails in the cuprate superconductors. Various many-body approaches involve generic model Hamiltonians and do not account for the interplay between the spin, charge, and lattice degrees of freedom. Here, by deploying the recently constructed strongly constrained and appropriately normed (SCAN) density functional, we show how the landscape of competing stripe and magnetic phases can be addressed on a first-principles basis both in the parent insulator YBa 2 Cu 3 O 6 and the near-optimally doped YBa 2 Cu 3 O 7 as archetype cuprate compounds. In YBa 2 Cu 3 O 7 , we find many stripe phases that are nearly degenerate with the ground state and may give rise to the pseudogap state from which the high-temperature superconducting state emerges. We invoke no free parameters such as the Hubbard U , which has been the basis of much of the existing cuprate literature. Lattice degrees of freedom are found to be crucially important in stabilizing the various phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗