Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HIGH EXPLOSIVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Dynamics of filaments during the edge-localized mode crash on NSTX

Edge localized modes (ELMs) are routinely observed in H-mode plasma regimes of the National Spherical Torus Experiment (NSTX). Due to the explosive nature of the instability, only diagnostics with high temporal and spatial resolution could provide a detailed insight into the dynamics associated with the ELMs. Gas-puff imaging at NSTX provides 2D measurements of the magnetic field aligned fluctuations (e.g., ELM filaments) in the scrape-off layer and at the plasma edge with 2.5 μs temporal and 10 mm optical resolution. A novel analysis technique was developed to estimate the frame-by-frame velocities and the spatial parameters of the dominant structures associated with the ELMs. The analysis was applied to single ELM events to characterize the ELM crash dynamics and then extended to a database of 159 ELM events. Statistical analysis was performed in order to find the characterizing dynamics of the ELM crash. The results show that on average, an ELM crash consists of a filament with a circular cross section, which is propelled outward with a characterizing peak radial velocity of ~3.3 km/s. The radial velocity was found to be linearly dependent on the distance of the filament from the separatrix, which has never been seen before. The ELM filament is characterized by propagation in the ion-diamagnetic direction poloidally with a peak velocity of 11.4 km/s. The ELM crash lasts for approximately 100 μs until the radial propulsion settles back to the pre-ELM level. Furthermore, the experimental findings were compared with analytical theory. Two possible mechanisms were identified for explaining the observations: the curvature interchange model and the current–filament interaction model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MODELING THE MULTI-WAVELENGTH EMISSION OF THE SHELL-TYPE SUPERNOVA REMNANT RX J1713.7-3946

Emission mechanisms of the shell-type supernova remnant (SNR) RX J1713.7-3946 are studied with multi-wavelength observational data from the radio, X-ray, GeV {gamma}-ray, and TeV {gamma}-ray bands. A Markov Chain Monte Carlo method is employed to explore the high-dimensional model parameter space systematically. Three scenarios for the {gamma}-ray emission are investigated: the leptonic, the hadronic, and a hybrid. Thermal emission from the background plasma is also included to constrain the gas density, assuming ionization equilibrium, and a 2{sigma} upper limit of about 0.03 cm{sup -3} is obtained as far as thermal energies account for a significant fraction of the dissipated kinetic energy of the SNR shock. Although systematic errors dominate the {chi}{sup 2} of the spectral fit of all models, we find that (1) the leptonic model has the best constrained model parameters, whose values can be easily accommodated with a typical supernova, but gives a relatively poor fit to the TeV {gamma}-ray data; (2) the hybrid scenario has one more parameter than the leptonic one and improves the overall spectral fit significantly; and (3) the hadronic one, which has three more parameters than the leptonic model, gives the best fit to the overall spectrum with relatively poorly constrained model parameters and very hard spectra of accelerated particles. The uncertainties of the model parameters decrease significantly if the spectral indices of accelerated electrons and protons are the same. The hybrid and hadronic models also require an energy input into high-energy protons, which seems to be too high compared with typical values for a supernova explosion. Further investigations are required to reconcile these observations with SNR theories.

79 ASTRONOMY AND ASTROPHYSICS↗

Big Data Analytics for Demand Response: Clustering Over Space and Time

The pervasive deployment of advanced sensing infrastructure in Cyber-Physical systems, such as the Smart Grid, has resulted in an unprecedented data explosion. Such data exhibit both large volumes and high velocity characteristics, two of the three pillars of Big Data, and have a time-series notion as datasets in this context typically consist of successive measurements made over a time interval. Time-series data can be valuable for data mining and analytics tasks such as identifying the “right” customers among a diverse population, to target for Demand Response programs. However, time series are challenging to mine due to their high dimensionality. In this paper, we motivate this problem using a real application from the smart grid domain. We explore novel representations of time-series data for BigData analytics, and propose a clustering technique for determining natural segmentation of customers and identification of temporal consumption patterns. Our method is generizable to large-scale, real-world scenarios, without making any assumptions about the data. We evaluate our technique using real datasets from smart meters, totaling ~ 18,200,000 data points, and show the efficacy of our technique in efficiency detecting the number of optimal number of clusters.

97 MATHEMATICS AND COMPUTING↗

Pulsed electron beam generation with fast repetitive double pulse system

Longer duration high voltage pulse (∼ 100 kV, 260 ns) is generated and reported using helical pulse forming line in compact geometry. The transmission line characteristics of the helical pulse forming line are also used to develop fast repetition double pulse system with very short inter pulse interval. It overcomes the limitations caused due to circuit parameters, power supplies and load characteristics for fast repetitive high voltage pulse generation. The high voltage double pulse of 100 kV, 100 ns with an inter pulse repetition interval of 30 ns is applied across the vacuum field emission diode for pulsed electron beam generation. The electron beam is generated from cathode material by application of negative high voltage (> 100 kV) across the diode by explosive electron emission process. The vacuum field emission diode is made of 40 mm diameter graphite cathode and SS mesh anode. The anode cathode gap was 6 mm and the drift tube diameter was 10 cm. The initial experimental results of pulsed electron beam generation with fast repetitive double pulse system are reported and discussed. (author)

43 PARTICLE ACCELERATORS↗

Dynamics of filaments during the edge-localized mode crash on NSTX

Edge localized modes (ELMs) are routinely observed in H-mode plasma regimes of the National Spherical Torus Experiment (NSTX). Due to the explosive nature of the instability, only diagnostics with high temporal and spatial resolution could provide a detailed insight into the dynamics associated with the ELMs. Gas-puff imaging (GPI) at NSTX provides 2D measurements of the magnetic field aligned fluctuations (e.g. ELM filaments) in the scrape-off layer and the at the plasma edge with 2.5 us temporal and 10 mm optical resolution.A novel analysis technique was developed to estimate the frame-by-frame velocities and the spatial parameters of the dominant structures associated with the ELMs. The analysis was applied to single ELM events to characterize the ELM crash dynamics, and then extended to a database of 169 ELM events.Statistical analysis was performed in order to find the characterizing dynamics of the ELM crash. The results show that on average an ELM crash consists of a filament with a circular cross-section which is propelled outwards with a characterizing peak radial velocity of ~3.3 km/s. The radial velocity was found to be linearly dependent on the distance of the filament from the separatrix, which has never been seen before. The ELM filament is characterized by propagation in the ion-diamagnetic direction poloidally with a peak velocity of 11.4 km/s. The ELM crash lasts for approximately 100us until the radial propulsion settles back to the pre-ELM level. The experimental findings were compared with analytical theory. Two possible mechanisms were identified for explaining the observations: the curvature interchange model and the current-filament interaction model.

correlation↗

Generation of radio sources.

Radio source model applied to small sources of high surface brightness occurring at great distances from explosion centers

Burbidge, G.↗

An emerging flux model for the solar flare phenomenon

An outline is presented of the physical processes involved in the emerging flux model, which appears to explain naturally many solar flare observations. The separate physical phases of the basic model include a preflare heating phase as the new flux emerges, an impulsive phase as high-energy particles are accelerated, a flash (or explosive) phase when the H-alpha intensity increases, and a main phase while it decreases. The extent and morphology of the main phase emission depend on the structure of the magnetic field region in which the new flux finds itself imbedded. It is suggested that a (small) simple loop flare occurs if the new flux appears in a region where no great amount of magnetic energy in excess of potential is stored. A two-ribbon flare occurs if the flux emerges near the polarity inversion line of an active region that has begun to develop filaments.

Heyvaerts, J.↗

The Sudbury Structure (Ontario, Canada) and Vredefort Structure (South Africa): A comparison

Both the Sudbury Structure (SS) and the Witwatersrand Basin surrounding the Vredefort Structure (VS) host some of the most important base and precious metal deposits on earth. In both structures Precambrian igneous, sedimentary and volcanic rocks were affected by the structure forming process, either meteorite impact or endogenic explosion, or as some VS workers propose, by high strain tectonics. Besides these general features there are some geological and geophysical characteristics that are strikingly similar in both structures. There are, however, some obvious differences. Directly related to the structure forming processes are breccias in the footwall rocks of both structures. Pseudotachylite breccias occurring in both structures display great similarities. Chemical and physical characteristics of the pseudotachylites are similar in both structures. Both structures are characterized by overturned collar rocks, not evident everywhere around the SS. The VS is rimmed by an up or overturned collar of sediments and volcanics of the Witwatersrand, Ventersdorp and Transvaal Supergroups. Drilling information proved that the strata of the Witwatersrand Supergroup in the south of the VS are lying horizontally. Shockmetamorphic features such as planar microdeformations in rock forming minerals and shatter cones are present in both structures in the footwall rocks and in the SS also in the breccias of the OF. Both structures have large geophysical anomalies associated with them. In both structures the anomalies were interpreted as being caused by mafic-ultramafic complexes underlying the structures.

Dressler, B. O.↗

Catastrophic volcanism as a cause of shocked features found at the K/T boundary and in cryptoexplosion structures

The presence of quartz grains containing shock lamellae at the Cretaceous/Tertiary (K/T) boundary is viewed by many as the single most compelling evidence of meteoritic or cometary impact because there is no known endogenous mechanism for producing these features. Similarly the presence of shocked quartz, shatter cones, coesite and stishovite at cryptoexplosion structures is comonly taken as conclusive evidence of impact. However, several recent studies have cast doubt on this interpretation. It is argued that basaltic volcanism, although not normally explosive, can under exceptional circumstances produce overpressures sufficiently high to produce shock features. The exceptional circumstances include a high content of volatiles, usually CO2, and no preestablished pathway to the surface. Rapid cooling of the saturated basaltic magma can occur if it underlies a cooler more evolved magma in a chamber. Initial slow cooling and partial exsolution of the volatiles will cause the density of the basaltic magma to become less than that of the overlying magma, leading to overturning and mixing. Gas will escape the magma chamber along planar cracks once the pressure becomes sufficiently high. In the vicinity of the crack tip there is a smallscale deviatoric stress pattern which is thought to be sufficiently high to produce transient cracks along secondary axes in the quartz crystals, causing the planar features. The CO2-rich fluid inclusions which have been found along planar elements of quartz in basement rocks of the Vredefort Dome were likely to have been emplaced by such a process. If the mechanism described is capable of producing shocked features as above, it would require a reassessment of the origin of many cryptoexplosion structures as well as seriously weakening the case for an impact origin of the K/T event.

Loper, D. E.↗

Spray automated balancing of rotors - How process parameters influence performance

This paper addresses the application of spray-automated balancing of rotors, and the influence that various operating parameters will have on balancing performance. Spray-automated balancing uses the fuel-air repetitive explosion process to imbed short, discrete bursts of high velocity, high temperature powder into a rotating part at an angle selected to reduce unbalance of the part. The shortness of the burst, the delay in firing of the gun, the speed of the disk and the variability in speed all influence the accuracy and effectiveness of the automated balancing process. The paper evaluates this influence by developing an analytical framework and supplementing the analysis with empirical data obtained while firing the gun at a rotating disk. Encouraging results are obtained, and it is shown that the process should perform satisfactorily over a wide range of operating parameters. Further experimental results demonstrate the ability of the method to reduce vibration levels induced by mass unbalance in a rotating disk.

Smalley, A. J.↗

Permanent wire splicing by an explosive joining process

The invention is an apparatus and method for wire splicing using an explosive joining process. The apparatus consists of a prebent, U-shaped strap of metal that slides over prepositioned wires. A standoff means separates the wires from the strap before joining. An adhesive means holds two ribbon explosives in position centered over the U-shaped strap. A detonating means connects to the ribbon explosives. The process involves spreading strands of each wire to be joined into a flat plane. The process then requires alternating each strand in alignment to form a mesh-like arrangement with an overlapped area. The strap slides over the strands of the wires, and the standoff means is positioned between the two surfaces. The detonating means then initiates the ribbon explosives that drive the strap to accomplish a high velocity, angular collision between the mating surfaces. This collision creates surface melts and collision bonding results in electron sharing linkups.

Bement, Laurence J.↗

Automata network models of galaxy evolution

Two ideas appear frequently in theories of star formation and galaxy evolution: (1) star formation is nonlocally excitatory, stimulating star formation in neighboring regions by propagation of a dense fragmenting shell or the compression of preexisting clouds; and (2) star formation is nonlocally inhibitory, making H2 regions and explosions which can create low-density and/or high temperature regions and increase the macroscopic velocity dispersion of the cloudy gas. Since it is not possible, given the present state of hydrodynamic modeling, to estimate whether one of these effects greatly dominates the other, it is of interest to investigate the predicted spatial pattern of star formation and its temporal behavior in simple models which incorporate both effects in a controlled manner. The present work presents preliminary results of such a study which is based on lattice galaxy models with various types of nonlocal inhibitory and excitatory couplings of the local SFR to the gas density, temperature, and velocity field meant to model a number of theoretical suggestions.

Chappell, David↗

Explosive Spot Joining of Metals

The invention is an apparatus and method for wire splicing using an explosive joining process. The apparatus consists of a prebend, U-shaped strap of metal that slides over prepositioned wires. A standoff means separates the wires from the strap before joining. An adhesive means holds two ribbon explosives in position centered over the U-shaped strap. A detonating means connects to the ribbon explosives. The process involves spreading strands of each wire to be joined into a flat plane. The process then requires alternating each strand in alignment to form a mesh-like arrangement with an overlapped area. The strap slides over the strands of the wires. and the standoff means is positioned between the two surfaces. The detonating means then initiates the ribbon explosives that drive the strap to accomplish a high velocity. angular collision between the mating surfaces. This collision creates surface melts and collision bonding resulting in electron-sharing linkups.

Bement, Laurence J.↗

Bulk X-ray Doppler Velocities in the Supernova Remnant Cassiopeia A

We map the average line-of-sight velocities of the X-ray-emitting mass in the supernova remnant Cassiopeia A using measurements of the centroid of the Si-Healpha blend with the Advanced CCD Imaging Spectrometer on the Chandra X-Ray Observatory. This 4 inch scale map confirms the broad trends noted in previous studies, namely, that the line-of-sight velocity scale is roughly 2000-3000 kilometers per second with relatively more blueshifted material in the southeastern region of the remnant than in the northwest; new details are that the northwestern region consists of two arcs, with the southernmost one representing the most redshifted X-ray-emitting material in Cas A. These results are consistent with contemporaneous results from XMM-Newton. The X-ray patterns resemble the complex velocity patterns measured at optical wavelengths for much denser ejecta, and they support the growing body of evidence that the explosion and subsequent evolution of Cas A were highly asymmetrical.

Hwang, Una↗

Gamma Ray Burst Discoveries with the Swift Mission

Gamma-ray bursts are among the most fascinating occurrences in the cosmos. They are thought to be the birth cries of black holes throughout the universe. There has been tremendous recent progress in our understanding of bursts with the new data from the Swift mission. Swift was launched in November 2004 and is an international multiwavelength observatory designed to determine the origin of bursts and use them to probe the early Universe. The two years of findings fiom the mission will be presented. A huge step forward has been made in our understanding of the mysterious short GRBs. High redshift bursts have been detected from enormous explosions early in the universe. GRBs have been found with giant X-ray flares occurring in their afterglow. These, and other topics, will be discussed.

Gehrels, Neil↗

Gamma Ray Burst Discoveries with SWIFT

Gamma-ray bursts are among the most fascinating occurrences in the cosmos. They are thought to be the birth cries of black holes throughout the universe. There has been tremendous recent progress in our understanding of bursts with the new data from the SWIFT mission. SWIFT was launched in November 2004 and is an international multiwavelength observatory designed to determine the origin of bursts and use them to probe the early Universe. Findings from the mission will be presented with emphasis on the relativistic outflows from GRBs. A huge step forward has been made in our understanding of the mysterious short GRBs. High redshift bursts have been detected from enormous explosions early in the universe. GRBs have been found with giant X-ray flares occurring in their afterglow, challenging predictions of the fireball model. These, and other topics, will be discussed.

Gehrels, Neil↗

SN 2010ay is a Luminous and Broad-lined Type Ic Supernova within a Low-metallicity Host Galaxy

We report on our serendipitous pre-discovery detection and detailed follow-up of the broad-lined Type Ic supernova SN2010ay at z approx 0.067 imaged by the Pan-STARRS1 3pi survey just approx 4 days after explosion. Combining our photometric observations with those available in the literature, we estimate the explosion date and the peak luminosity of the SN, M(sub R) approximately equals 20.2 mag, significantly brighter than known GRB-SNe and one of the most luminous SNe Ibc ever discovered. We measure the photospheric expansion velocity of the explosion from our spectroscopic follow-up observations, v(sub ph) approximately equals 19.2 X 10 (exp 3) km/s at approx 40 days after explosion. In comparison with other broad-lined SNe, the characteristic velocity of SN2010ay is 2 - 5 X higher and similar to the measurements for GRB-SNe at comparable epochs. Moreover the velocity declines two times slower than other SNe Ic-BL and GRB-SNe. Assuming that the optical emission is powered by radioactive decay, the peak magnitude implies the synthesis of an unusually large mass of Ni-56, M(sub Ni) = 0.9(+0.1/-0.1) solar mass. Our modeling of the light-curve points to a total ejecta mass, M(sub ej) approx 4.7 Solar Mass, and total kinetic energy, E(sub K,51) approximately equals 11. Thus the ratio of M(sub Ni) to M(sub ej) is at least twice as large for SN2010ay than in GRB-SNe and may indicate an additional energy reservoir. We also measure the metallicity (log(O/H) + 12 = 8.19) of the explosion site within the host galaxy using a high S/N optical spectrum. Our abundance measurement places this SN in the low-metallicity regime populated by GRB-SNe, and approx 0.2(0.5) dex lower than that typically measured for the host environments of normal (broad-lined) Ic supernovae. Despite striking similarities to the recent GRB-SN100316D/2010bh, we show that gamma-ray observations rule out an associated GRB with E(sub gamma) approx < 6 X 10(exp 48) erg (25-150 keV). Similarly, our deep radio follow-up observations with the Expanded Very Large Array rule out relativistic ejecta with energy, E approx > 10(exp 48) erg. These observations challenge the importance of progenitor metallicity for the production of a GRB, and suggest that other parameters also play a key role.

Sanders, N. E.↗

Operator Informational Needs for Multiple Autonomous Small Vehicles

With the anticipated explosion of small unmanned aerial vehicles, it is highly likely that operators will be controlling fleets of autonomous vehicles. To fulfill the promise of autonomy, vehicle operators will not be concerned with manual control of the vehicle; instead, they will deal with the overall mission. Furthermore, the one operator to many vehicles is becoming a constant meme with various industries including package delivery, search and rescue, and utility companies. In order for an operator to concurrently control several vehicles, his station must look and behave very differently than the current ground control station instantiations. Furthermore, the vehicle will have to be much more autonomous, especially during non-normal operations, in order to accommodate the knowledge deficit or the information overload of the operator in charge of several vehicles. The expected usage increase of small drones requires presenting the operational information generated by a fleet of heterogeneous autonomous agents to an operator. NASA Langley Research Center's Autonomy Incubator has brought together researchers in various disciplines including controls, trajectory planning, systems engineering, and human factors to develop an integrated system to study autonomy issues. The initial human factors effort is focusing on mission displays that would give an operator the overall status of all autonomous agents involved in the current mission. This paper will discuss the specifics of the mission displays for operators controlling several vehicles.

Trujillo, Anna C.↗