Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Experimental study of a metal-matrix composite

A metal-matrix specimen was investigated using moire interferometry with 2400 lines/m (60,960 l/in.). The specimen was a 6-ply (0/ + or - 45)s boron-aluminum tensile coupon with a central slot. The unequal deformations in fibers and matrix were evident. Special attention was given to a plastic slip zone in the matrix. Normal and shear strains were calculated in the slip zone; the shear-strain concentration factor rose dramatically with the onset of plastic slip and continued to rise gradually with load to 95 percent of the failure load. The precipitous change from maximum tensile strain in one fiber to zero tensile strain in the neighboring fiber was accommodated by the very high shear strains of the matrix in the slip zone. Experimental considerations are discussed: shear strains are independent of rigid-body rotations; simplified strain calculations are justified; averaging across the narrow slip region and the influence of finite thickness of the specimen grating contribute to underestimation of peak strains.

Post, D.↗
NASA NTRS1986

Linewidth characteristics of Raman-shifted dye laser output at 720 and 940 nm

Raman conversion efficiency and line broadening are reported for Stokes operation at 720 and 940 nm, with hydrogen and deuterium as the Raman source, and using an Nd:YAG pumped Quanta-Ray PDL-2 dye laser. The dye laser linewidth is 0.2/cm (FWHM) with the grating alone as an intracavity element, and the conversion efficiency at 400 psi was found to be 40 and 20 percent for outputs of 720 and 940 nm, respectively. Pressure broadening coefficients of (9.2 + or - 0.9) x 10 to the -5th per cm/psi for hydrogen, and 7.7 x 10 to the -5th per cm/psi for deuterium, were obtained in good agreement with previous results. The linewidth at the first Stokes wavelength was shown to be determined by pressure broadening in the Raman medium.

Grossmann, B. E.↗
NASA NTRS1986

Gas correlation lidar for methane detection

A new type of DIAL system for the detection of methane in the atmosphere is being developed. The main feature of this lidar is the use of a gas correlation technique to obtain the reference signal by means of a single laser pulse, instead of two shots at different wavelengths. This fact is useful to make measurements on fast moving platforms. To meet the infrared absorption band of methane an optical parametric oscillator (OPO) was used with a LiNbO3 crystal as active element, and a tuning range between 1.5 divided by 4 microns. As known, the major problem to overcome in parametric oscillators are the pump beam quality and the difficulty in reducing the linewidth. The first requirement is met by using, as a pump, a Nd-YAG laser based on a new type of resonator cavity, named SFUR (Self Filtering Unstable Resonator). The laser emits, with high efficiency, near diffraction limited pulsed beams of about 250 mJ of energy, 20 ns of duration at 10 pps of frequency repetition rate. On the other hand, the gas correlation technique allows the operation with a bandwidth as large as 1/cm, which is obtainable using only a diffraction grating as a dispersive element in the OPO cavity.

Galletti, E.↗
NASA NTRS1986

Research relative to high resolution camera on the advanced X-ray astrophysics facility

The HRC (High Resolution Camera) is a photon counting instrument to be flown on the Advanced X-Ray Astrophysics Facility (AXAF). It is a large field of view, high angular resolution, detector for the x-ray telescope. The HRC consists of a CsI coated microchannel plate (MCP) acting as a soft x-ray photocathode, followed by a second MCP for high electronic gain. The MCPs are readout by a crossed grid of resistively coupled wires to provide high spatial resolution along with timing and pulse height data. The instrument will be used in two modes, as a direct imaging detector with a limiting sensitivity of 10 to the -15 ergs sq cm sec in a 10 to the 5th second exposure, and as a readout for an objective transmission grating providing spectral resolution of several hundreds to thousands.

Source record↗
NASA NTRS1986

Search for volatiles in the surface of icy satellites

It is proposed to measure the reflectance spectra of the icy satellites of Jupiter, Saturn and Uranus in the spectral region 1.8 to 2.4 micrometers. These observations use the new Cooled Grating Array Spectrometer using a 32-element InSb photodiode array detector and produce spectra of higher resolution and precision than any data yet obtained; the ultimate scientific objective is to search for the signatures of methane clathrate, ammonium hydroxide or carbon monoxide clathrate (compounds predicted to exist on icy surfaces in the outer solar system by several theories of formation of these bodies) in the region of the spectrum where water ice has a relative maximum in reflectance. At the very least, these data will allow upper limits to be placed on the amount of these chemical species that can be present. The specific targets is Europa, Ganymede, Enceladus, Ariel and Titania, bodies that have the highest probability of having some or all of these volatiles on their surface according to current formation models.

Brown, R. H.↗
NASA NTRS1986

Infrared observations of planetary atmospheres

Infrared data was obtained on planetary atmospheres which provides critical information on atmospheric structure, composition, and cloud properties in support of planetary missions such as Voyager and Galileo. Mapping of Jupiter and Saturn in thermal and reflected solar radiation is a high-priority monitoring and exploratory activity. Some of these images of Jupiter are shown. Radiation at 17.8 micrometer probes the upper tropospheric temperature structure where spatial structure bears a strong resemblance to visible and near-infrared reflected sunlight such as at 2.0 micrometer. At 7.8 micrometer, stratospheric temperatures appear to have a three-banded structure, enhancements near the magnetic poles and occasional transient features such as the equatorial filament near the right limb. Clouds or hazes are observed high in the stratosphere looking at wavelengths such as 2.2 micrometer, where gaseous opacity is very strong. Other maps examine cloud properties from thermal radiation not strongly influenced by gaseous opacity and the distribution of condensable gases, such as ammonia. Millimeter and submillimeter filtered radiometric observations were made of Jupiter, Uranus and Neptune via collaborative work. Radiometric observations of Uranus and Neptune at 21 and 32 micrometer were acquired and analyzed as well as grating array spectra in the ranges of 8 to 14 micrometer, 16 to 23 micrometer, and 18 to 32 micrometer. These showed evidence for C2H2 in the stratosphere of Uranus and C2H4 in the stratosphere of Neptune.

Orton, G. S.↗
NASA NTRS1986

Infrared observations of small solar-system bodies

Observations of Europa using the Cooled Grating Array Spectrometer have resulted in the discovery of new absorption features in the spectrum of the trailing side of Europa which have been attributed to either magnetospherically implanted sulfur compounds or recently emplaced hydrates of ammonia. More observations are planned to determine which of these two classes of compounds are responsible. Two asteroid occultations have been observed so far, but with some negative results (the occultations paths shifted sufficiently that the groups responsible for timing the visual occultation got no data). High-quality data in the thermal infrared were obtained nevertheless; those data are useful for constraint of thermal models of asteroids and will be analyzed in that context. Work was completed to perfect a computer code that will fit a triaxial-ellipsoid thermal model to the IR data while constrained by the visual lightcurve.

Brown, R. H.↗
NASA NTRS1986

Airborne spectroradiometry: The application of AIS data to detecting subtle mineral absorption features

Analysis of Airborne Imaging Spectrometer (AIS) data acquired in Australia has revealed a number of operational problems. Horizontal striping in AIS imagery and spectral distortions due to order overlap were investigated. Horizontal striping, caused by grating position errors can be removed with little or no effect on spectral details. Order overlap remains a problem that seriously compromises identification of subtle mineral absorption features within AIS spectra. A spectrometric model of the AIS was developed to assist in identifying spurious spectral features, and will be used in efforts to restore the spectral integrity of the data.

Cocks, T. D.↗
NASA NTRS1986

Comparison of the 1984 and 1985 AIS data over the Singatse Range (Yerington), Nevada

The Singatse Range is composed of a series of 53 types of volcanic, plutonic, metamorphic, and sedimentary rocks. In addition the Jurassic plutonic rocks are also of economic interest for their copper mineralization which is contained in a porphyry dike swarm. The 1984 and 1985 flight results from the Airborne Imaging Spectrometer (AIS) instrument flown in the NASA/JPL C-130 aircraft are contrasted and compared. The 1984 data are less noisy than the 1985, in which many sets of vertical stripings from bad detectors can be seen. Significantly however, enough of the hydrothermal alteration patterns can be seen in each line at the mutual crossing points that one can say that the specific targets were detected in both year's flights. The spectra of both years are corrupted by the second-order effect from the grating, but 0-H bond absorption at essentially correct wavelengths for sericite and/or kaolinite can be seen.

Lyon, R. J. P.↗
NASA NTRS1986

More interstellar emission features at 3.3-3.6 micrometers!

The present data set consists of 3.20 to 3.55 micron spectra of HD44179, NGC 7027, BD+30 3639, and Elias 1 obtained with a cooled-grating array spectrometer (CGAS) at the NASA Infrared Telescope Facility. Emission features and details of the emission feature profiles are presented for high resolution spectra. Greater complexity is shown than might be expected. It is significant that the 3.29 micron feature has an invariant central wavelength, even at high resolution, and this strongly supports the case for a very specific substance or mixture of substances which is giving rise to this feature.

Tokunaga, A. T.↗
NASA NTRS1986

Moderate spectral resolution observations of 3 micron absorption features in highly obscured objects

The 3 micron absorption spectra of sources seen in or behind molecular clouds generally show a variety of absorption features. Three separate absorptions are used to explain these features. The cooled-grating array spectrometer (CGAS) at the NASA Infrared Telescope Facility was used to obtain spectra of the late-type mass-loss star OH 0739-12 and the protostars MonR2 IRS-2 and IRS-3 (solid circles). The differences between the spectra are discussed.

Smith, R. G.↗
NASA NTRS1986

Some recent infrared spectroscopy of interstellar processes

The potential which infrared spectroscopic techniques provide for studying interstellar process is demonstrated. Several examples are given. The data were obtained at UKIRT, using its frequency-chopped Fabry-Perot spectrometer and its seven-channel cooled grating spectrometer.

Geballe, T. R.↗
NASA NTRS1986

Enhanced acetylene emission near the north pole of Jupiter

The present paper is concerned with observations of acetylene fundamental and hot band vibrational emission lines from the planet Jupiter. It is pointed out that the observation of a polar bright spot in the atmosphere of Jupiter is characterized by an enhancement in the individual lines of C2H2 which can be interpreted as an enhancement in the acetylene abundance. However, a purely thermal effect, on non-LTE phenomena cannot be excluded. The intensity of the observed hot band lines is also consistent with either hypothesis. The reported observations were performed with a cooled Fabry-Perot Grating Spectrometer (FPGS). Observations and instrumentation are considered in detail along with the calculation of synthetic spectra on the basis of a line-by-line computation, and the interpretation of the obtained data.

Drossart, Pierre↗
NASA NTRS1986

Far infrared spectroscopy of star formation regions in M82

Emission lines of (O III) at 52 microns and 88 microns and of (N III) at 57 microns in the nucleus of the galaxy M82 have been observed from the Kuiper Airborne Observatory with the facility's cooled grating spectrometer. The (N III) line has not been previously detected in any extragalactic source. The fluxes in the lines indicate approx 4 x 10 to the 7th power M of ionized gas and a large population of massive stars (equivalent to 5 x 10 to the 5th power 08.5 stars), sufficient to power the infrared luminosity of the nucleus. We use the 52 to 88 micron line intensity ratio to find an average electron density of 210 + or 75 in the nucleus; this is 10 to 100 times lower than values typically observed in individual compact HII regions in our Galaxy. The relative line strengths of the (O III) and (N III) lines imply an N(++)/O(++) ratio of 0.45 + or - 0.1, significantly lower than is measured by the same method in individual HII regions at similar galactocentric distances (equal to or less than 400 pc) in our Galaxy. This lower N(++)/O(++) ratio may be due to a lower N/O ratio, higher stellar temperatures, or both, in M82. At spectral resolutions of approx. 90 km/s, all three line profiles are similarly asymmetric. They can be well fitted by two Gaussian distributions with widths of approx. 150 km/s and central velocities of approx. 110 and approx. 295 km/s, bracketing the systemic velocity of the nucleus of approx. 210 km/s. Within uncertainties, both the N(++)/O(++) ratio and the electron density are the same for both Gaussian components; this indicates no major large-scale gradient in either quantity within the nucleus.

Duffy, P. B.↗
NASA NTRS1987

Melting of troilite at high pressure in a diamond cell by laser heating

A system for measuring melting temperatures at high pressures is described. The sample is heated with radiation from a YAG laser. The beam is reflected downward through a microscope objective, through the upper diamond anvil, and focused onto the sample. Hense, intense heating is produced only at the sample and not within the diamond anvils. A vidicon system is used to observe the sample during heating. Incandescent light from the heated sample passes back through the objective lens into a grating spectrometer. The spectrum of the incandescent light is received by the photodiode array and stored in the multichannel analyzer. These data can then be transferred to floppy disk for analysis. A curve fitting program is used to compare the spectra with standard blackbody curves and to determine the temperature. Pressure is measured by the ruby fluorescence method. The system was used to study the melting behavior of natural troilite (FeS).

Bassett, William A.↗
NASA NTRS1987

Electronic heterodyne moire deflectometry: A method for transient and three dimensional density fields measurements

Effects of diffraction and nonlinear photographic emulsion characteristics on the performance of deferred electronic heterodyne moire deflectometry are investigated. The deferred deflectometry is used for measurements of nonsteady phase objects where it is difficult to complete the analysis of the field in real time. The sensitivity, accuracy and resolution of the system are calculated and it is shown that they are weakly affected by diffraction and by nonlinear recording. The feactures of the system are significantly improved compared with the conventional deferred intensity moire technique, and are comparable with the online heterodyne moire. The system was evaluated experimentally by deferred measurements of the refractive index gradients of a weak phase object consisting of a large KD*P crystal. This was done by photographing the phase object through a Ronchi grating and analyzing the tranparency with the electronic heterodyne readout system. The results are compared with the measurements performed on the same phase object with online heterodyne moire deflectometry and with heterodyne holographic interferometry methods. Some practical considerations for system improvement are discussed.

Stricker, Josef↗
NASA NTRS1986

Airborne spectrophotometry of P/Halley from 20 to 65 microns

Simultaneous 20 to 65 microns spectrometry and 100 microns photometry of P/Halley obtained on board the Kuiper Airborne Observatory (KAO) in 1985 Dec. and 1986 April are discussed. Spectra with resolution 30 to 50 were obtained with the NASA/Goddard 24 channel grating spectrometer. Measurements were made on the nucleus as well as 5 points along and perpendicular to the Sun-tail direction. The observations reveal the absence of any strong spectral features. The color temperature of the dust varies over time scales as short as 2 days, but is higher than that expected for a rapidly rotating blackbody at the same distance from the Sun. The color temperature does not vary within 1 arcmin of the nucleus, but the coma is brighter on the sunward side than on the antisunward side.

Glaccum, W.↗
NASA NTRS1985

Performance comparison of two interferometric droplet sizing techniques

In this paper, two interferometric techniques (Visibility/Itensity Validation and Phase Doppler) are critically examined in characterizing the spray of an air-assist nozzle with Sauter mean diameter of less than 35 microns. The two techniques are compared to each other and are evaluated against a Malvern diffraction unit. With the use of a rotating grating for Visibility/Intensity Validation, the interference techniques compare well to each other and to the diffraction method. The Phase Doppler technique is more easily applied to the spray, due largely to its broadened size and velocity ranges. The consistency of the interferometric results raises questions with regard to the use of the Malvern's most frequently applied distribution model.

Jackson, T. A.↗