Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Cycle Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Modeling of the Reduction of Hematite in the Chemical Looping Combustion of Methane using Barracuda

Chemical looping combustion is a promising technology for the capture of CO 2 involving reduction and oxidation of materials known as oxygen carriers. One particular carrier is hematite as it is readily available and relatively inexpensive as well as being non-toxic. The objective of this paper is to present a new particle model and reaction kinetics that can be applied to Barracuda® simulations of the fuel reactor. This was done since Barracuda does not allow for the JMA (nucleation and growth) type kinetics that were developed from analytical study the results from TGA and fixed bed experiments. This paper summarizes the analytical analysis of the fixed bed reduction experiments conducted in a cycling fixed bed reactor and subsequently modeled with Barracuda® CFD software to develop the new model. The experiments were conducted using nominally 1000 g of hematite material. The cyclic processing began with the reduction step then proceeded to the oxidation step repeating this analysis for several cycles (5 to 10). The effects of fuel partial pressure (8.4, 7.2 and 5 mole %) on the conversion were investigated. The JMA analysis assumed the reactions to occur in the shell surrounding the particle grains with diffusion of oxygen to the grain surface from the core. In contrast, working with the particle kinetics allowed in Barracuda®, the reactions occur with different hematite species (surface and core) homogeneously mixed. Therefore it is necessary to develop a new particle model with the rates being related to the amount of reactant (surface or core) in the particle. This paper presents the development of such a particle model and compares the results with experimental results.

01 COAL, LIGNITE, AND PEAT↗

Modeling of Cr 2 O 3 -doped UO 2 as a near-term accident tolerant fuel for LWRs using the BISON code

The near-term Accident Tolerant Fuel (ATF) concepts consist of minor modifications of the standard UO 2 -Zr fuel rod materials to provide enhanced accident tolerance. Uranium dioxide fuel with chromia dopant, developed by AREVA, is of interest in view of its enhanced fission gas retention. The predictive capability of the BISON fuel performance code for chromia-doped UO 2 fuel is assessed through simulation of the Halden IFA-677.1 fuel rod experiment. A sensitivity analysis is conducted to interpret the deviation of code’s predictions from the experimental data. A power ramp test is also modeled with BISON and calculations are compared to the experimental database. Finally, a large-break LOCA (LBLOCA) case is simulated with BISON, leading to an initial assessment of the enhanced safety associated with chromia-doped fuel compared to the standard UO 2 fuel in LWRs

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of the Magneto-Hydrodynamic (MHD) Energy Bypass Engine for High-Speed Air-Breathing Propulsion

The performance of the MHD energy bypass air-breathing engine for high-speed propulsion is analyzed in this investigation. This engine is a specific type of the general class of inverse cycle engines. In this paper, the general relationship between engine performance (specific impulse and specific thrust) and the overall total pressure ratio through an engine (from inlet plane to exit plane) is first developed and illustrated. Engines with large total pressure decreases, regardless of cause or source, are seen to have exponentially decreasing performance. The ideal inverse cycle engine (of which the MHD engine is a sub-set) is then demonstrated to have a significant total pressure decrease across the engine; this total pressure decrease is cycle-driven, degrades rapidly with energy bypass ratio, and is independent of any irreversibility. The ideal MHD engine (inverse cycle engine with no irreversibility other than that inherent in the MHD work interaction processes) is next examined and is seen to have an additional large total pressure decrease due to MHD-generated irreversibility in the decelerator and the accelerator. This irreversibility mainly occurs in the deceleration process. Both inherent total pressure losses (inverse cycle and MHD irreversibility) result in a significant narrowing of the performance capability of the MHD bypass engine. The fundamental characteristics of MHD flow acceleration and flow deceleration from the standpoint of irreversibility and second-law constraints are next examined in order to clarify issues regarding flow losses and parameter selection in the MM modules. Severe constraints are seen to exist in the decelerator in terms of allowable deceleration Mach numbers and volumetric (length) required for meaningful energy bypass (work interaction). Considerable difficulties are also encountered and discussed due to thermal/work choking phenomena associated with the deceleration process. Lastly, full engine simulations utilizing inlet shock systems, finite-rate chemistry, wall cooling with thermally balanced engine (fuel heat sink), fuel injection and mixing, friction, etc. are shown and discussed for both the MHD engine and the conventional scramjet. The MHD bypass engine has significantly lower performance in all categories across the Mach number range (8 to 12.2). The lower performance is attributed to the combined effects of 1) additional irreversibility and cooling requirements associated with the MHD components and 2) the total pressure decrease associated with the inverse cycle itself.

Riggins, David W.↗

A Study of Propane Combustion in a Spark-Ignited Cooperative Fuel Research (CFR) Engine

Liquefied petroleum gas (LPG), whose primary composition is propane, is a promising candidate for heavy-duty vehicle applications as a diesel fuel alternative due to its CO 2 reduction potential and high knock resistance. To realize diesel-like efficiencies, spark-ignited LPG engines are proposed to operate near knock-limit over a wide range of operating conditions, which necessitates an investigation of fuel-engine interactions that leads to end-gas autoignition with propane combustion. This work presents both experimental and numerical studies of stoichiometric propane combustion in a sparkignited (SI) cooperative fuel research (CFR) engine. Engine experiments are initially conducted at different compression ratio (CR) values, and the effects of CR on engine combustion are characterized. A three-pressure analysis (TPA) model based on the two-zone combustion concept is developed in GT-Power and validated using test results to estimate in-cylinder wall temperatures, residual gas fraction, etc. This model is further utilized to examine end-gas chemistry by enabling the SI turbulent flame combustion and unburned gas chemical kinetics modules. Finally, a three-dimensional (3D) computational fluid dynamic (CFD) model of the CFR engine is developed in CONVERGE, where the G-equation and SAGE detailed chemical kinetics models are implemented for combustion modeling. Here, a 153 species reduced chemical kinetics mechanism derived from the detailed NUIGMech1.1 mechanism based on the ignition delay and laminar flame speed (LFS) studies is used to generate an LFS lookup table and to describe end-gas autoignition chemistry. Multi-cycle Reynolds-averaged Navier-Stokes (RANS) simulations are then performed for the tested CRs, and the numerical model is shown to be capable of predicting the propane combustion characteristics, particularly the end-gas autoignition behavior.

20 FOSSIL-FUELED POWER PLANTS↗

Multidimensional Multiphysics Simulation of TRISO Particle Fuel

Multidimensional multiphysics analysis of TRISO-coated particle fuel using the BISON finite-element based nuclear fuels code is described. The governing equations and material models applicable to particle fuel and implemented in BISON are outlined. Code verification based on a recent IAEA benchmarking exercise is described, and excellant comparisons are reported. Multiple TRISO-coated particles of increasing geometric complexity are considered. It is shown that the code's ability to perform large-scale parallel computations permits application to complex 3D phenomena while very efficient solutions for either 1D spherically symmetric or 2D axisymmetric geometries are straightforward. Additionally, the flexibility to easily include new physical and material models and uncomplicated ability to couple to lower length scale simulations makes BISON a powerful tool for simulation of coated-particle fuel. Future code development activities and potential applications are identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fiscal Year (FY) 2017 Activities for the Spent Fuel Nondestructive Assay Project

The main focus of research in the NA-241 spent fuel nondestructive assay (NDA) project in FY17 has been completing the fabrication and testing of two prototype instruments for upcoming spent fuel measurements at the Clab interim storage facility in Sweden. One is a passive instrument: Differential Die-away Self Interrogation-Passive Neutron Albedo Reactivity (DDSI), and one is an active instrument: Differential Die-Away-Californium Interrogation with Prompt Neutron (DDA). DDSI was fabricated and tested with fresh fuel at Los Alamos National Laboratory in FY15 and FY16, then shipped to Sweden at the beginning of FY17. Research was performed in FY17 to simplify results from the data acquisition system, which is complex because signals from 56 different 3He detectors must be processed using list mode data. The DDA instrument was fabricated at the end of FY16. New high count rate electronics better suited for a spent fuel environment (i.e., KM-200 preamplifiers) were built specifically for this instrument in FY17, and new Tygon tubing to house electrical cables was purchased and installed. Fresh fuel tests using the DDA instrument with numerous configurations of fuel rods containing depleted uranium (DU), low enriched uranium (LEU), and LEU with burnable poisons (Gd) were successfully performed and compared to simulations.1 Additionally, members of the spent fuel NDA project team travelled to Sweden for a “spent fuel characterization and decay heat” workshop involving simulations of spent fuel and analysis of uncertainties in decay heat calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Vacuum Drying Study of Simulated Failed Nuclear Fuel (FY23)

This report documents work performed under the Office of Spent Fuel and Waste Disposition’s (SFWD’s) Spent Fuel and Waste Science and Technology program for the US Department of Energy (DOE) Office of Nuclear Energy (NE). This work was performed to fulfill Level 4 milestone M4SF-23OR010203013. Over the 70 years of light-water reactor (LWR) operation, fuel rod failures have occurred during reactor operation. Based on the Unified Database that SFWD maintains, there are ~5,400 LWR fuel rods that developed leaks during reactor operation of the >19 million rods operated. The Unified Database indicates that ~4,200 of these rods remain in the spent fuel pool, and ~1,200 are in dry storage canisters. It is expected that all failed rods are “waterlogged” in the spent fuel pool, meaning the inside of the rods contain some volume of water. There are two related objectives of this work. The first is to develop a simple and inexpensive experiment to better understand removal of water from inside failed spent nuclear fuel (SNF) rods, and the second is to develop a model to predict drying of simulated failed fuel in the simple experiment. Once a model captures the phenomenon in the simple experiment, it can be extended to predict drying under more prototypical conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

M5 Alloy Specification for TREAT Conceptual Fuel Cladding Selection

The Idaho National Laboratory (INL) Transient Reactor Test Facility (TREAT) is a nuclear test facility designed to provide safety data for fuel designs by simulating conditions during various types of nuclear excursions. The M5 alloy cladding material for the conceptual TREAT Low Enriched Uranium fuel core shall be supplied according to this specification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of modeling choices on inventory and in-cask criticality calculations for FORSMARK 3 BWR spent fuel - 14441

Simulation of boiling water reactor (BWR) fuel depletion poses a challenge for nuclide inventory validation and nuclear criticality safety analyses. This challenge is due to the complex operating conditions and assembly design heterogeneities that characterize these nuclear systems. Fuel depletion simulations and in-cask criticality calculations are affected by (1) completeness of design information, (2) variability of operating conditions needed for modeling purposes, and (3) possible modeling choices. These effects must be identified, quantified, and ranked according to their significance. This paper presents an investigation of BWR fuel depletion using a complete set of actual design specifications and detailed operational data available for five operating cycles of the Swedish BWR Forsmark 3 reactor. The data includes detailed axial profiles of power, burnup, and void fraction in a very fine temporal mesh for a GE14 (10x10) fuel assembly. The specifications of this case can be used to assess the impacts of different modeling choices on inventory prediction and in-cask criticality, specifically regarding the key parameters that drive inventory and reactivity throughout fuel burnup. This study focused on the effects of the fidelity with which power history and void fraction distributions are modeled. The corresponding sensitivity of the reactivity in storage configurations is assessed, and the impacts of modeling choices on decay heat and inventory are addressed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Solid-Fueled Pressurized Chemical Looping with Flue-Gas Turbine Combined Cycle for Improved Plant Efficiency and CO 2 Capture

The purpose of this document is to report the final result of techno-economic analysis for the proposed 550MWe integrated pressurized chemical looping combustion combined cycle process. An Aspen Plus based model is delivered in this report along with the results from three sensitivity scenarios including the operating pressure, excess air ratio and oxygen carrier performance. A process flow diagram and detailed stream table for the base case are also provided with the overall plant energy balance, carbon balance, sulfur balance and water balance. The approach to the process and key component simulation are explained. The economic analysis (OPEX and CAPX) on four study cases via DOE NETL Reference Case 12 are presented and explained.

20 FOSSIL-FUELED POWER PLANTS↗

Fuel performance of chromium-coated zirconium alloy and silicon carbide accident tolerant fuel claddings

The U.S. Department of Energy’s Accident Tolerant Fuel program is focused on extending the time for fuel failure during postulated severe accidents compared to the standard UO2-Zr alloy fuel system. This research investigates the feasibility of two different chromium-coated cladding concepts, one of which is zirconium-alloy based and the other is composite-SiC based. Both claddings had 50µm coatings, deducted from the base layer thicknesses. The claddings were reported on, using the multi- physics fuel performance tool BISON, under steady-state PWR operating conditions as well as two transients: power ramp and a loss-of-coolant accident (LOCA). The chromium-coated claddings showed comparable thermo-mechanical performance to the reference Zircaloy-4 cladding. As chromium is reported to provide an order of magnitude improvement in oxidation resistance, it is expected to be a better alternative in accident scenarios. Simulation results for both concepts call for further experimental investigation as well as modeling of beyond design-basis accidents.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty Studies of Real Anode Surface Area in Computational Analysis for Molten Salt Electrorefining

This study examines how much cell potential changes with five differently assumed real anode surface area cases. Determining real anode surface area is a significant issue to be resolved for precisely modeling molten salt electrorefining. Based on a three-dimensional electrorefining model, calculated cell potentials compare with an experimental cell potential variation over 80 hours of operation of the Mark-IV electrorefiner with driver fuel from the Experimental Breeder Reactor II. We succeeded to achieve a good agreement with an overall trend of the experimental data with appropriate selection of a mode for real anode surface area, but there are still local inconsistencies between theoretical calculation and experimental observation. In addition, the results were validated and compared with two-dimensional results to identify possible uncertainty factors that had to be further considered in a computational electrorefining analysis. These uncertainty factors include material properties, heterogeneous material distribution, surface roughness, and current efficiency. Zirconium's abundance and complex behavior have more impact on uncertainty towards the latter period of electrorefining at given batch of fuel. The benchmark results found that anode materials would be dissolved from both axial and radial directions at least for low burn-up metallic fuels after active liquid sodium bonding was dissolved.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Automatic information extraction from neutron radiography imaging to estimate axial fuel expansion in $\mathrm{EBR-II}$

Approximately 130,000 metal fuel pins were irradiated in the Experimental Breeder Reactor II (EBR-II) during its 30 years of operation to develop and characterize existing and prospective fuels. For many of the metal fuel irradiation experiments, neutron radiography imaging was performed to characterize fuel behavior, like fuel swelling. However, due to the lack of technology or resources, many of the images have not been processed or were processed manually through visual examination. This paper represents first-attempt to develop an image processing algorithm capable of automatically extracting information regarding the degree of fuel swelling from neutron radiography imaging. The algorithm was applied to 120 images of three different metallic fuel pin compositions—U-10Zr, U-8Pu-10Zr, and U-19Pu-10Zr. The algorithm performs operations of image intensity adjustment, image binarization, region finding, and labeling to extract information about fuel swelling. The average growth for U-10Zr was found to be 8.49% with 95% Confidence Interval (CI) [8.33 –8.66%], for U-8Pu-10Zr — 7.50% with 95% CI [7.23 – 7.78%], and for U-19Pu-10Zr — 3.15%, with 95% CI [2.40 – 3.91%]. The results obtained by applying this automatic image processing algorithm are consistent with previously reported studies of the same types of fuels. The automatic image processing algorithm will be expanded to include thousands of available neutron radiography images and different types of fuels to investigate empirical dependencies of fuel swelling, which can be subsequently applied to advanced fuel modeling. Results from this study can later be compared to BISON simulations to further benchmark modeling efforts and develop assessment cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First-principles DFT+U modeling of defect behaviors in anti-ferromagnetic uranium mononitride

A series of point defects in uranium mononitride (UN) have been studied by first-principles DFT+U calculations. The influence of intrinsic defects on the properties of UN was explored by considering the anti-ferromagnetic (AFM) order along the [001] direction. Our results show that all the point defects lead to obvious volume swelling of UN crystal. Energetically, the interstitial nitrogen defect is the most favorable one among single-point defects in UN crystal with the formation energy of 4.539 eV, while the N-Frenkel pair becomes the most preferable one among double-point defects. The AFM order induces obvious electron spin polarization of uranium towards neighboring uranium atoms with opposite spin orientations in UN crystal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Casting Process Modeling and Validation

Computational simulations of gravity casting for metallic U-Pu-Zr nuclear fuel rods were performed with the free surface flow solver Flow3d. Two different casting apparatus designs were explored for studying the effects on the final cast rod profiles. Experimental data for the casting problem obtained from Idaho National Laboratory (INL) was validated with numerical simulations on one of the designs considered. The volume of the rods cast, length of the rods, and temperature profiles were predicted through the transient casting process and were found to match closely with experimental data. A sensitivity analysis with vent locations, pressure, mesh refinement, and effects of surface tension at the interface were explored. This work serves as a validation benchmark for the casting problem and provides guidelines when performing simulation exercises for modeling casting. This paper also provides the mathematical framework to enabling modeling of the casting process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling defect and fission gas properties in U-Si fuels

Uranium silicides, in particular U 3 Si 2 , are being explored as an advanced nuclear fuel with increased accident tolerance as well as competitive economics compared to the baseline UO 2 fuel. They benefit from high thermal conductivity (metallic) compared to UO 2 fuel (insulator or semi-conductor) used in current Light Water Reactors (LWRs). The U-Si fuels also have higher fissile density. In order to perform meaningful engineering scale nuclear fuel performance simulations, the material properties of the fuel, including the response to irradiation environments, must be known. Unfortunately, the data available for USi fuels are rather limited, in particular for the temperature range where LWRs would operate. The ATF HIP is using multi-scale modeling and simulations to address this knowledge gap.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal Transport and Fracture Behavior of Sintered Fuel Pellets: Experimental Validation of NEAMS Tool MARMOT

The project targets at experimental validation of NEAMS tool MARMOT for predicting thermal transport and fuel fracture. The key components of the project include: (1) sintering UO 2 samples with well-controlled microstructures (grain size, pore, fission bubble, porosity and pore distribution either in intra- or inter-granular pores); (2) thermal conductivity measurements of these wellcharacterized polycrystalline samples; (3) indentation testing of sintered UO 2 with various grain size, porosity and stoichiometry to obtain fracture and crack propagation mechanisms (inter or intragranular fracture); and (4) validation and uncertainty quantification of the MARMOT thermal transport and fracture models. The high quality experimental data will be used to validate the predictions of MARMOT for thermal transport and fracture, using average data and local microstructure information. In this work, UO 2 fuels with controlled microstructure (grain size, pore size/structure and fuel chemistry) were successfully prepared by high energy ball milling of the hyper-stoichiometric UO 2+x powders purchased commercially, and consolidated by spark plasma sintering. Dense nano-sized UO 2 fuel pellets with controlled stoichiometry were sintered by SPS. The effects of different SPS sintering parameters on the pore size and distribution were investigated, and the correlation among the SPS parameter – microstructure control – stoichiometry/defect structure was established. To further control the pore structure and fuel chemistry, systematic thermal annealing of the sintered fuels with the controlled pore structure was performed in a reduced. The controlled microstructure and fuel chemistry enable the investigation of the separate effects of pore structure and fuel chemistry on thermal transport behavior. The mechanical properties of the sintered UO 2 fuels were tested by nanoindentation and microindentation testing at different temperatures. The fracture behavior of the sintered fuels as functions of grain structure and temperature was investigated. Nanocrystalline UO 2 display higher hardness than microcrystalline counterpart, consistent with the Hall-Petch strengthening mechanism. Greater Young’s modulus and fracture toughness are also identified for the nanocrystalline UO 2 , and hardness and Young’s modulus decrease with temperature, suggesting better ductility of oxide fuels at greater temperature at small length scale. Hyper-stoichiometric UO 2 specimen displays higher hardness and fracture toughness than stoichiometric UO 2 , due to the impediment of the crack propagation by the oxygen interstitial atoms. These results are useful in understanding the mechanical properties of the high burn-up structure (HBS) formed in nuclear fuels during reactor operation, and also provide critical experimental data as the input for the development and validation of the MARMOT fracture model of nuclear fuels. The thermal properties of the sintered UO 2 fuel pellets with controlled grain structure, fuel chemistry and pore structures are measured by laser flash and the impact of the microstructure characteristics on the thermal transport properties is elucidated. Through a close collaboration with the MARMOT team at Idaho National Laboratory, the thermal properties of the sintered oxide fuel pellets with controlled microstructures are measured experimentally, and modeled using the developed MARMOT thermal transport models for a joint effort of demonstrating high spatial resolution measurements at the microstructural level on as-fabricated nuclear fuels and materials and obtain critical experimental data for model validation and properties predictions. In this work, we also conducted sensitivity analysis and uncertainty quantification (UQ) on a mesoscale simulation that has been applied to understand the effective thermal conductivity of UO 2 reactor fuel using the MARMOT tool. We also conduced UQ on mechanistic macroscale models that have been developed to predict the effective thermal conductivity. The most sensitive parameter is the thermal conductivity of bulk UO 2 for the thermal conductivity models. In the future, the predicted simulation distributions need to be compared to experimental data for validation of the models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗