Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FRAGMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Scaling laws for the catastrophic collisions of asteroids

Collisions of asteroids have traditionally been studied through laboratory experiments involving targets with masses some 15 to 20 orders of magnitude less than the bodies they are intended to simulate. Here the problem of extrapolation of experimental results up to the size regimes of interest is considered. Scaling relations are developed for the shattering threshold and the size and velocity distributions of collisional fragments. A methodology which has often been used assumes that collisional outcomes (e.g., the size of the largest remaining fragment) are completely characterized by Q, the kinetic energy of the impactor normalized by the mass of the target body. This scaling is shown to be an unlikely special case of a more general scaling theory which indicates that collisional outcomes should depend on target size and encounter velocity, even when Q is held constant. In particular, as target size increases, the critical value of Q required to shatter a body, and the characteristic fragment velocities should initially decrease (in qualitative agreement with the recent model of Farinella et al., 1982) up to an asteroid size of perhaps 40 to 50 km; then, as the gravitational forces start to dominate, the value of Q will again increase (in qualitative agreement with the recent model of Davis et al., 1983 and 1985).

Holsapple, K. A.↗

Possible impact spherules from near the base of the Middle Ordovician in northern Illinois

Angular fragments of a greyish-white chertlike rock containing numerous sand-size spherules believed to be of impact origin have been found in northern Illinois. These fragments, many as large as a man's fist, are recognizable in the field by the presence in them of conspicuous rounded cavities which were probably bubbles. Most have been picked up as float in the bottoms of ravines, but it is clear that they come from near the base of the St. Peter sandstone and that they were already fragments when incorporated in this formation.

Read, W. F.↗

The composition and history of breccia 67015 from North Ray Crater

Feldspathic fragmental breccia (FFB) 67015 from the rim of North Ray Crater was examined and was found to be the most diverse and complex of the Apollo 16 FFBs. It contains a wider range of clast types than any of the others and is not dominated by any single lithology. Several crystalline lithologies, occurring in minor amounts, were identified that represent highland plutonic rocks. Plagioclase fragments are the most abundant breccia constituent, followed by clasts of impact melt rocks and granulites. The impact melts are of two main types: feldspathic fragment-laden melts and mafic, KREEPy melt rocks of VHA basalt composition. Textural evidence indicates that some of the VHA melts were hot and plastic when they accumulated into the breccia. Ar-40 - Ar-39 dates show that both types of melts solidified about 3.9 x 10 to the 9th years ago. Magnetic measurements on clasts show a scatter of NMR directions, making it impossible to read a consistent imprint of an ancient dipolar magnetic field. Previous studies of Apollo 16 stratigraphy suggested that KREEPy melt rocks were introduced to the site as Imbrium impact ejecta, about 3.8 million years ago. Present results indicate that the highlands crust contained KREEP components as early as 3.9 x 10 to the 9th years ago.

Marvin, Ursula B.↗

An evaluation of energy-independent heavy ion transport coefficient approximations

Utilizing a one-dimensional transport theory for heavy ion propagation, evaluations of typical energy-dependent transport coefficient approximations are made by comparing theoretical depth-dose predictions to published experimental values for incident 670 MeV/nucleon Ne-20 beams in water. Results are presented for cases where the input nuclear absorption cross sections, or input fragmentation parameters, or both, are fixed. The lack of fragment charge and mass concentration resulting from the use of Silberberg-Tsao fragmentation parameters continues to be the main source of disagreement between theory and experiment.

Townsend, L. W.↗

Absorption and dissociative photoionization cross sections of NH3 from 80 to 1120 A

The total absorption, photoionization, and dissociative photoionization cross sections of ammonia have been measured from 80 to 1120 A. All possible fragment ions have been observed including doubly ionized ammonia. The absolute ionization efficiencies have also been measured in this spectral range. The appearance potentials of the fragment ions have been measured and are compared with the calculated appearance potentials derived from published heats of formation and ionization potentials of the fragments.

Samson, James A. R.↗

Thermal instabilities in protogalactic clouds

The means by which a protogalaxy can fragment to form the first generation of stars and globular clusters remains an important problem in astrophysics. Gravitational instabilities grow on timescales too long to drive fragmentation before the background density grows by many orders of magnitude (see Murray and Lin 1989a, and references therein). Thermal instability provides a much more likely mechanism. After its initial collapse, a protogalactic cloud is expected to be shock heated to its virial temperature approx. 10(exp 6) K. Cooling by H and He+ below 10(exp 6) K has a negative slope, so that the cloud is subject to strong thermal instabilities. Density enhancements may then grow rapidly, fragmenting the protogalaxy as it cools to lower temperatures. The role of dynamical effects upon the growth of perturbations is considered here. The method used is similar to that used in Murray and Lin (1989a; see also the Erratum to appear September 15), which examined the growth of thermal instabilities with a one-dimensional Lagrangian hydrodynamics code, written for spherical symmetry. Perturbed regions therefore take the form of shells. The dynamical variables are integrated explicitly, while the temperature, ionization fraction, and molecular fraction are integrated implicitly, and account is taken for non-equilibrium values of these quantities.

Murray, S. D.↗

Stochastic histories of dust grains in the interstellar medium

The purpose is to study an evolving system of refractory dust grains within the Interstellar Medium (ISM). This is done via a combination of Monte Carlo processes and a system of partial differential equations, where refractory dust grains formed within supernova remnants and ejecta from high mass loss stars are subjected to the processes of sputtering and collisional fragmentation in the diffuse media and accretion within the cold molecular clouds. In order to record chemical detail, the authors take each new particle to consist of a superrefractory core plus a more massive refractory mantle. The particles are allowed to transfer to and fro between the different phases of the interstellar medium (ISM) - on a time scale of 10(exp 8) years - until either the particles are destroyed or the program finishes at a Galaxy time of 6x10(exp 9) years. The resulting chemical and size spectrum(s) are then applied to various astrophysical problems with the following results. For an ISM which has no collisional fragmentation of the dust grains, roughly 10 percent by mass of the most refractory material survives the rigors of the ISM intact, which leaves open the possibility that fossilized isotopically anomalous material may have been present within the primordial solar nebula. Stuctured or layered refractory dust grains within the model cannot explain the observed interstellar depletions of refractory material. Fragmentation due to grain-grain collisions in the diffuse phase plus the accretion of material in the molecular cloud phase can under certain circumstances cause a bimodal distribution in grain size.

Liffman, Kurt↗

Three basaltic earth-approaching asteroids and the source of the basaltic meteorites

Diameters of 1.2, 1.0, and 3.4 km are respectively derived for the earth-approaching asteroids 1983 RD, 1980 PA, and 1985 DO2, whose spectra are virtually identical to that of the basaltic-surfaced large asteroid, Vesta. While probably not fragments of Vesta, the three asteroids may be fragments of one or more Vesta-like parent bodies; it is suggested that they may be fragments of the source body or bodies of the HED meteorites. While these asteroids' regoliths have significant insulating properties, they differ from that of the moon in that lunar-like glasses and agglutinates are largely absent. It is noted that asteroids of this kind may have impacted the earth without leaving the chemical signatures associated with the K-T boundary event.

Cruikshank, D. P.↗

New observations on the quartz monzodiorite-granite suite

Five new fragments of quartz monzodiorite (QMD) were identified in particles from soil 15403, which was collected from the boulder sampled as rock 15405, an impact-melt breccia containing clasts of KREEP basalt, QMD, granite, and a more primitive alkali norite. Petrographic and geochemical studies of the fragments show considerable variation in modal proportions and bulk composition. This heterogeneity is due to unrepresentative sampling in small fragments of coarse-grained rocks. Variations in the proportions of accessory minerals have marked effects on incompatible-trace-element concentrations and ratios. Semiquantitative calculations support the derivation of QMD from 60-percent fractional crystallization of a KREEP basalt magma as suggested by Hess (1989). Apollo 15 KREEP basalt cannot be the actual parent magma because the evolved rocks predate volcanic KREEP basalts. It is suggested that ancient KREEP basalt magmas have crystallized as plutons, with alkali norite clasts offering the only direct evidence of this precursor.

Marvin, U. B.↗

Micrometeoroids and debris on LDEF

Part of the LDEF tray allocated to French Experiments (FRECOPA) was devoted to the study of dust particles. The tray was located on the face of LDEF directly opposed to the velocity vector. Two passive experiments were flown: a set of glass and metallic samples; and multilayer thin foil detectors. Crater size distribution made possible the evaluation of the incident microparticle flux in the near environment. Comparisons are made with measurements obtained on the other faces of LDEF and with results from similar experiments on the MIR. Of interest was the study of impact features on stacked thin foil detectors. The top foil acted as a shield, fragmenting the projectiles and spreading the fragments over the surface of the thick plate located underneath. EDS analysis has provided evidence of impactor fragments. Detectors consisting of a thin shield and thick bottom plate appear to offer a significantly higher return of data concerning chemical analysis of impactor residues than single plate detectors. The samples of various materials offer a unique opportunity for the study of the many processes involved upon hypervelocity impact phenomena.

Mandeville, Jean-Claude↗

A new angle on lunar ferroan-suite differentiation

Small fragments of rock found among soil particles in sample 67513 from Station 11 on the southern rim of North Ray Crater at Apollo 16 yield information regarding the mafic, ferroan rocks from which they drive. We have identified a set of particles that have distinctive trace element geochemistry and whose bulk and mineral compositions indicate a genetic relationship to one another. These include polymict as well as monomict lithologies. Igneous members range from fragments with abundant anorthite to some with abundant exsolved pigeonite and augite. Consideration of this set of rock fragments, combined with mafic ferroan clasts from large breccias and from lunar-highlands meteorites suggests that there may be separate differentiation trends within the ferroan suite which are subparallel and which are less steem in Fe-Mg vs. An fractionation that the vertical trend obtained when the entire ferroan suite is taken together. This may result from a complex magma system with isolated reservoirs or separate, independently evolving magmas. Mineral compositional and textural variations are consistent with a model set forth by Longhi and Boudreau wherein the anorthite-rich samples reflect adcumulus growth with mafic crystals forming only from trapped liquid, and the more mafic samples by anorthite and pyroxene orthocumulate development.

Jolliff, B. L.↗

Bohemian circular structure, Czechoslovakia: Search for the impact evidence

Test of the impact hypothesis for the origin of the circular, 260-km-diameter structure of the Bohemian Massif led to the discovery of glasses and breccias in the Upper Proterozoic sequence that can be compared to autogeneous breccias of larger craters. The black recrystallized glass contains small exsolution crystals of albite-oligoclase and biotite, regularly dispersed in the matrix recrystallized to quartz. The occurrence of these rocks is limited to a 1-sq-km area. It is directly underlain by the breccia of the pelitic and silty rocks cemented by the melted matrix, found on several tens of square kilometers. The melt has the same chemistry as rock fragments in major and in trace elements. It is slightly impoverished in water. The proportion of melted rocks to fragments varies from 1:5 to 10:1. The mineralogy of melt viens is the function of later, mostly contact metamorphism. On the contact of granitic plutons it abounds on sillimanite, cordierite, and small bullets of ilmenite. Immediately on the contact with syenodiorites it contains garnets. The metamorphism of the impact rock melt seems the most probable explanation of the mineralogy and the dry total fusion of rocks accompanied by the strong fragmentation. Other aspects of this investigation are discussed.

Rajlich, Petr↗

Impact experiments into multiple-mesh targets: Concept development of a lightweight collisional bumper

The utility of multiple-mesh targets as potential lightweight shields to protect spacecraft in low-Earth orbit against collisional damage is explored. Earlier studies revealed that single meshes comminute hypervelocity impactors with efficiencies comparable to contiguous targets. Multiple interaction of projectile fragments with any number of meshes should lead to increased comminution, deceleration, and dispersion of the projectile, such that all debris exiting the mesh stack possesses low specific energies (ergs/sq cm) that would readily be tolerated by many flight systems. The study is conceptually exploring the sensitivity of major variables such as impact velocity, the specific areal mass (g/sq cm) of the total mesh stack (SM), and the separation distance (S) between individual meshes. Most experiments employed five or ten meshes with total SM typically less than 0.5 the specific mass of the impactor, and silicate glass impactors rather than metal projectiles. While projectile comminution increases with increasing impact velocity due to progressively higher shock stresses, encounters with multiple-meshes at low velocity (1-2 km/s) already lead to significant disruption of the glass impactors, with the resulting fragments being additionally decelerated and dispersed by subsequent meshes, and, unlike most contiguous single-plate bumpers, leading to respectable performance at low velocity. Total specific bumper mass must be the subject of careful trade-off studies; relatively massive bumpers will generate too much debris being dislodged from the bumper itself, while exceptionally lightweight designs will not cause sufficient comminution, deceleration, or dispersion of the impactor. Separation distance was found to be a crucial design parameter, as it controls the dispersion of the fragment cloud. Substantial mass savings could result if maximum separation distances were employed. The total mass of debris dislodged by multiple-mesh stacks is modestly smaller than that of single, contiguous-membrane shields. The cumulative surface area of all penetration holes in multiple mesh stacks is an order of magnitude smaller than that in analog multiple-foil shields, suggesting good long-term performance of the mesh designs. Due to different experimental conditions, direct and quantitative comparison with other lightweight shields is not possible at present.

Hoerz, Friedrich↗

Interplanetary meteoroid debris in LDEF metal craters

We have examined craters in Al and Au LDEF surfaces to determine the nature of meteoroid residue in the rare cases where projectile material is abundantly preserved in the crater floor. Typical craters contain only small amounts of residue and we find that less than 10 percent of the craters in Al have retained abundant residue consistent with survival of a significant fraction (greater than 20 percent) of the projectile mass. The residue-rich craters can usually be distinguished optically because their interiors are darker than ones with little or no apparent projectile debris. The character of the meteoroid debris in these craters ranges from thin glass liners, to thick vesicular glass containing unmelted mineral fragments, to debris dominated by unmelted mineral fragments. In the best cases of meteoroid survival, unmelted mineral fragments preserve both information on projectile mineralogy as well as other properties such as nuclear tracks caused by solar flare irradiation. The wide range of the observed abundance and alteration state of projectile residue is most probably due to differences in impact velocity. The crater liners are being studied to determine the composition of meteoroids reaching the Earth. The compositional types most commonly seen in the craters are: (1) chondritic (Mg, Si, S, Fe in approximately solar proportions), (2) Mg silicate. amd (3) iron sulfide. These are also the most common compositional types of extraterrestrial particle types collected in the stratosphere. The correlation between these compositions indicates that vapor fractionation was not a major process influencing residue composition in these craters. Although the biases involved with finding analyzable meteoroid debris in metal craters differ from those for extraterrestrial particles collected in and below the atmosphere, there is a common bias favoring particles with low entry velocity. For craters this is very strong and probably all of the metal craters with abundant residue were caused by asteroidal dust impacting at minimum velocities.

Brownlee, D. E.↗

Pressure Vessel Burst Test Program - Progress paper No. 4

A status report is presented for a program studying the characteristics of the blast waves and fragmentation caused by ruptured gas-filled pressure vessels. Experimental data trends have been derived from 14 burst pressure vessels. Attention is given to energy release in bursting, blast wave and fragmentation behavior, height of burst effects, fragment velocity vs vessel pressure, and comparative blast effects for spherical/composite vs cylindrical/steel pressure vessels.

Maurice R Cain↗

Giant radiating dyke swarms on Earth and Venus

On Earth, giant radiating dyke swarms are usually preserved as fan-shaped fragments which have been dismembered from their original configuration by subsequent plate tectonic rifting events. Analysis of the largest fragments and consideration of their original configuration has led to the idea that many swarms are plume related, and that dyke swarms radiate away from plume centers. Magellan radar data reveal abundant intact giant radiating swarms on Venus which are similar in scale and pattern to those on Earth. The absence of intense weathering and plate tectonic processes on Venus accounts for the preservation of the primary radiating patterns. It is characteristic of both Earth and Venus that giant radiating dikes are emplaced laterally for distances of at least 2000 km away from plume centers. At distances beyond the influence of the plume on both Earth and Venus, the radiating dyke pattern is often swept into a linear pattern aligned with the regional stress field. There is tremendous potential synergism between the characterization and analysis of terrestrial dyke swarms (where significant erosion has revealed their structure and emplacement directions at depth) and the giant swarms of Venus (where the complete circumferential structure is preserved, and the surface fracture systems above near surface dikes and the nature of the central source regions are revealed). In this study, we report on the characteristics of radial dyke swarms on Earth and Venus and draw some preliminary comparisons from the two perspectives. In summary, on both planets there is evidence for plume-related magmatic centers associated with vertical and lateral injection of magma over considerable distances (up to at least 2000 km). The abundance of very broadly radiating swarms on Venus supports the notion that the swarms on Earth were radiating over broad sectors at the time of intrusion but were dissected by later events. The Venus data show that a swarm can change from radiating (proximal) to regional (distal) subparallel orientations. An implication for Earth is that many regional linear swarms which do not have a radiating pattern may be due to fragmentation of the swarm during later plate tectonic rifting. Completion of the global classification and census of Venus features, comparison to the terrestrial synthesis, and documentation of the mode of emplacement of dikes in these environments (buffered and unbuffered conditions) should lead to additional general insight into mechanisms of formation and evolution and their relation to plumes.

Ernst, Richard E.↗

Erosion of ejecta at Meteor Crater, Arizona

New methods for estimating erosion at Meteor Crater, Arizona, indicate that continuous ejecta deposits beyond 1/4-1/2 crater radii from the rim have been lowered less than 1 m on the average. This conclusion is based on the results of two approaches: coarsening of unweathered ejecta into surface lag deposits and calculation of the sediment budget within a drainage basin on the ejecta. Preserved ejecta morphologies beneath thin alluvium revealed by ground-penetrating radar provide qualitative support for the derived estimates. Although slightly greater erosion of less resistant ejecta locally has occurred, such deposits were limited in extent, particularly beyond 0.25R-0.5R from the present rim. Subtle but preserved primary ejecta features further support our estimate of minimal erosion of ejecta since the crater formed about 50,000 years ago. Unconsolidated deposits formed during other sudden extreme events exhibit similarly low erosion over the same time frame; the common factor is the presence of large fragments or large fragments in a matrix of finer debris. At Meteor Crater, fluvial and eolian processes remove surrounding fines leaving behind a surface lag of coarse-grained ejecta fragments that armor surfaces and slow vertical lowering.

Grant, John A.↗

Extension of the BRYNTRN code to monoenergetic light ion beams

A monoenergetic version of the BRYNTRN transport code is extended to beam transport of light ions (H-2, H-3, He-3, and He-4) in shielding materials (thick targets). The redistribution of energy in nuclear reactions is included in transport solutions that use nuclear fragmentation models. We also consider an equilibrium target-fragment spectrum for nuclei with mass number greater than four to include target fragmentation effects in the linear energy transfer (LET) spectrum. Illustrative results for water and aluminum shielding, including energy and LET spectra, are discussed for high-energy beams of H-2 and He-4.

Cucinotta, Francis A.↗