Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extreme scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

The Potential of Small Space Telescopes for Exoplanet Observations

The imaging of faint exoplanets near bright stars requires the development of very high contrast detection techniques, including both precise wavefront control and deep starlight rejection. A system-level proof-of-principle experiment carried out at at the Palomar Observatory has recently demonstrated that exoplanets can be detected very near stars even with a fairly small (1.5 m diameter) telescope aperture, such as someday might be used by a first space-based exoplanet imaging mission. Using fine-scale wavefront correction across this small aperture, together with fine pointing and focus control, pre- and post-detection speckle reduction, and a vector vortex coronagraph, it has been possible to achieve extremely good starlight rejection within a small number of diffractions beams of the stellar position. This performance has recently allowed the imaging of the three HR8799 planets and the HD32297 disk, thus providing a first system-level validation of the steps needed to achieve high-contrast observations at very small angles. These results thus serve to highlight the potential of small space telescopes aiming at high-contrast exoplanet observations. Specifically, a small-angle coronagraph enables the use of smaller telescopes, thus potentially reducing mission cost significantly.

coronagraphy↗

Chandra Reveals Heavy Obscuration and Circumnuclear Star Formation in Seyfert 2 Galaxy NGC 4968

We present the Chandra imaging and spectral analysis of NGC 4968, a nearby (z = 0.00986) Seyfert 2 galaxy. We discover extended (approx. 1 kpc) X-ray emission in the soft band (0.5-2 keV) that is neither coincident with the narrow line region nor the extended radio emission. Based on spectral modeling, it is linked to on-going star formation [approx. 2.6-4 Mass compared to Earth yr(exp.− 1)]. The soft emission at circumnuclear scales (inner approx. 400 pc) originates from hot gas, with kT approx. 0.7 keV, while the most extended thermal emission is cooler (kT approx. 0.3 keV). We refine previous measurements of the extreme Fe K alpha equivalent width in this source (EW 2.5 + 2.6/-1.0 keV), which suggests the central engine is completely embedded within Compton-thick levels of obscuration. Using physically motivated models fit to the Chandra spectrum, we derive a Compton-thick column density [N(sub H) is greater than 1.25× 10(exp 24) cm(exp.− 2)] and an intrinsic hard (2-10 keV) X-ray luminosity of approx. 3-8× 10(exp. 42) erg s(exp. − 1) (depending on the presumed geometry of the obscurer), which is over two orders of magnitude larger than that observed. The large Fe K Alpha EW suggests a spherical covering geometry, which could be confirmed with X-ray measurements above 10 keV. NGC 4968 is similar to other active galaxies that exhibit extreme Fe K Alpha EWs (i.e., greater than 2 keV) in that they also contain on-going star formation. This work supports the idea that gas associated with nuclear star formation may increase the covering factor of the enshrouding gas and play a role in obscuring active galactic nuclei.

LaMassa, Stephanie M.↗

Disk-resolved Photometric Properties of Pluto and the Coloring Materials across its Surface

A multiwavelength regionally dependent photometric analysis of Pluto's anti-Charon-facing hemisphere using images collected by New Horizons' Multispectral Visible Imaging Camera (MVIC) reveals large variations in the absolute value and spectral slope of the single-scattering albedo. Four regions of interest are analyzed: the dark equatorial belt, Pluto's north pole, nitrogen-rich regions, and the mid-latitude terrains. Regions dominated by volatile ices such as Lowell Regio and Sputnik Planitia present single-scattering albedos of ~0.98 at 492 nm, almost neutral across MVIC's visible wavelength range (400–910 nm), indicating limited contributions from tholin materials. Pluto's dark equatorial regions, informally named Cthulhu and Krun Maculae, have single-scattering albedos of ~0.16 at 492 nm and are the reddest regions. Applying the Hapke radiative transfer model to combined MVIC and Linear Etalon Imaging Spectral Array (LEISA) spectra (400–2500 nm) of Cthulhu Macula and Lowell Regio successfully reproduces the spectral properties of these two regions of dramatically disparate coloration, composition, and morphology. Since this model uses only a single coloring agent, very similar to the Titan-like tholin of Khare et al., to account for all of Pluto's colors, this result supports the Grundy et al. conclusion that Pluto's coloration is the result of photochemical products mostly produced in the atmosphere. Although cosmic rays and extreme ultraviolet photons reach Pluto's surface where they can drive chemical processing, observations of diverse surface colors do not require different chemical products produced in different environments. We report a correction scaling factor in the LEISA radiometric calibration of 0.74 ± 0.05.

Silvia Protopapa↗

Hawai‘i Island Disasters: Using NASA Earth Observations to Assess Coastal Flood Risk with Measures of Land Cover Change, Flood Extent, and Vulnerability for Adaptation and Mitigation Planning on Hawai‘i Island

As the County of Hawai‘i faces an increased risk of extreme flooding events, sea-level rise, and other hazards associated with climate change, the need for building geospatial capacity to make better-informed decisions is critical. The County of Hawai‘i and Arizona State University partnered with NASA DEVELOP to complete a macro-scale risk analysis for the island of Hawai‘i analyzing flooding, land cover, vulnerability, and exposure factors using Earth observations and socio-economic data. The team assessed the variation in urban coastal vulnerability around the entire island of Hawai‘i, using satellite imagery of coastal land cover typology from satellite products such as Landsat 8 Operational Land Imager (OLI), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Sentinel-1 Synthetic Aperture Radar (SAR). The team made a sharable geodatabase containing datasets modeling vulnerability to coastal flooding as well as the Hawai‘i Flood Risk Toolbox (HiFloRT) which contains multiple tools for the County to map land cover, extreme rainfall and flood extent across the Island. The end products will allow the County of Hawai‘i to establish a protocol and standard framework for the utilization of Earth observations in future planning.

Garren Kalter↗

Isosurface Extraction in Time-Varying Fields Using a Temporal Hierarchical Index Tree

Many high-performance isosurface extraction algorithms have been proposed in the past several years as a result of intensive research efforts. When applying these algorithms to large-scale time-varying fields, the storage overhead incurred from storing the search index often becomes overwhelming. this paper proposes an algorithm for locating isosurface cells in time-varying fields. We devise a new data structure, called Temporal Hierarchical Index Tree, which utilizes the temporal coherence that exists in a time-varying field and adoptively coalesces the cells' extreme values over time; the resulting extreme values are then used to create the isosurface cell search index. For a typical time-varying scalar data set, not only does this temporal hierarchical index tree require much less storage space, but also the amount of I/O required to access the indices from the disk at different time steps is substantially reduced. We illustrate the utility and speed of our algorithm with data from several large-scale time-varying CID simulations. Our algorithm can achieve more than 80% of disk-space savings when compared with the existing techniques, while the isosurface extraction time is nearly optimal.

Shen, Han-Wei↗

Nonequilibrium universality of the nonreciprocally coupled 𝑂⁡(𝑛 1 ) × 𝑂⁡(𝑛 2 ) model

Nonequilibrium dynamics play an important role in all contexts of physics, both classical and quantum as well as living and nonliving, so it is crucial to develop a foundational understanding of nonequilibrium phase transitions. In this work we investigate an important class of nonequilibrium dynamics in the form of nonreciprocal interactions. In particular we study how nonreciprocal coupling between two 𝑂⁡(𝑛𝑖) order parameters (with 𝑖 = 1,2) affects the universality at a multicritical point, extending the analysis of J. T. Young et al. [Phys. Rev. X 10, 011039 (2020)], which considered the case 𝑛 1 = 𝑛 2 = 1, i.e., a ℤ 2 × ℤ 2 model. We show that nonequilibrium fixed points (NEFPs) emerge for a broad range of 𝑛 1 ,𝑛 2 and exhibit intrinsically nonequilibrium critical phenomena, namely a violation of fluctuation-dissipation relations at all scales and underdamped oscillations near criticality in contrast to the overdamped relaxational dynamics of the corresponding equilibrium models. Furthermore, the NEFPs exhibit an emergent discrete scale invariance in certain physically relevant regimes of 𝑛 1 ,𝑛 2 , but not others, depending on whether the critical exponent 𝜈 is real or complex. The boundary between these two regions is described by an exceptional point in the renormalization group (RG) flow, leading to distinctive features in correlation functions and the phase diagram. Another contrast with the previous work is the number and stability of the NEFPs as well as the underlying topology of the RG flow. Lastly, we investigate an extreme form of nonreciprocity where one order parameter is independent of the other order parameter but not vice versa. Unlike the ℤ 2 × ℤ 2 model, which becomes nonperturbative in this case, we identify a distinct nonequilibrium universality class whose dependent field similarly violates fluctuation-dissipation relations but does not exhibit discrete scale invariance or underdamped oscillations near criticality.

Critical phenomena↗

Death at watersheds: Galaxy quenching in low-density environments

The evolution of galaxies is influenced by their local and global environment in the cosmic web. Galaxies with very old stellar populations (VO galaxies with D n (4000) index ≥1.75) mostly lie in the centres of galaxy clusters, where they evolve under the influence of processes characteristic of high-density cluster environments. However, VO galaxies have also been found in poor groups in global low-density environments between superclusters, which we call watershed regions. Our aim is to analyse the properties of galaxies in various cosmic environments with a focus on VO galaxies in the watershed regions to understand their evolution, and the origin of the large-scale morphology–density relation. We employ the Sloan Digital Sky Survey DR10 MAIN spectroscopic galaxy sample in the redshift range 0.009 ≤ z ≤ 0.200 to calculate the luminosity–density field of galaxies, to determine groups and filaments in the galaxy distribution, and to obtain data on galaxy properties. The luminosity–density field with smoothing length 8 h -1 Mpc, D8, characterises the global environment of galaxies. We analyse the group and galaxy contents of regions with various D8 thresholds. We divide groups into low- and high-luminosity groups based on the highest luminosity of groups in the watershed region, L gr ≤ 15 × 10 12 h -2 L ⊙ . We compare the stellar masses, the concentration index, and the stellar velocity dispersions of quenched and star-forming galaxies among single galaxies, satellite galaxies, and the brightest group galaxies (BGGs) in various environments. We show that the global density is most strongly related to the richness of galaxy groups. Its influence on the overall star formation quenching in galaxies is less strong. Correlations between the morphological properties of galaxies and the global density field are the weakest. The watershed regions with D8 < 1 are populated mostly by single galaxies, constituting 70% of all galaxies there, and by low-luminosity groups. Still, approximately one-third of all galaxies in the watershed regions are VO galaxies. They have lower stellar masses, smaller stellar velocity dispersions, and stellar populations that are up to 2 Gyr younger than those of VO galaxies in other global environments. In higher density global environments (D8 > 1), the morphological properties of galaxies are very similar. Differences in galaxy properties are the largest between satellites and BGGs in groups. Our results suggest that galaxy evolution is determined by the birthplace of galaxies in the cosmic web, and mainly by internal processes which lead to the present-day properties of galaxies. This may explain the similarity of (VO) galaxies in extremely different environments.

79 ASTRONOMY AND ASTROPHYSICS↗

How Have Hydrological Extremes Changed Over the Past 20 Years?

Severe floods and droughts, including their back-to-back occurrences (weather whiplash), have been increasing in frequency and severity around the world. Improved understanding of systematic changes in hydrological extremes is essential for preparation and adaptation. In this study, we identified and quantified extreme wet and dry events globally by applying a clustering algorithm to terrestrial water storage (TWS) data from the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (FO). The most intense events, ranked using an intensity metric, often reflect impacts of large-scale oceanic oscillations such as El Niño–Southern Oscillation and consequences of climate change. The severity of both wet and dry events, represented by standardized TWS anomalies, increased significantly in most cases, likely associated with intensification of wet and dry weather regimes in a warmer world, and consequently, exhibited strongest correlation with global temperature. In the Dry climate, the number of wet events decreased while the number of dry events increased significantly, suggesting a drying trend that may be attributed to climate variability and possible increases in irrigation and reliance on groundwater. In the Continental climate where temperature has risen faster than global average, dry events increased significantly. Characteristics of extreme events often showed strong correlations with global temperature, especially when averaged over all climates. These results suggest changes in hydrological extremes and underscore the importance of quantifying total water storage changes when studying hydrological extremes. Extending the GRACE/FO record, which spans 2002 to the present, is essential to continuously tracking changes in TWS and hydrological extremes.

Bailing Li↗

Reviews and syntheses: Arctic fire regimes and emissions in the 21st century

In recent years, the pan-Arctic region has experienced increasingly extreme fire seasons. Fires in the northern high latitudes are driven by current and future climate change, lightning, fuel conditions, and human activity. In this context, conceptualizing and parameterizing current and future Arctic fire regimes will be important for fire and land management as well as understanding current and predicting future fire emissions. The objectives of this review were driven by policy questions identified by the Arctic Monitoring and Assessment Programme (AMAP) Working Group and posed to its Expert Group on Short-Lived Climate Forcers. This review synthesizes current understanding of the changing Arctic and boreal fire regimes, particularly as fire activity and its response to future climate change in the pan-Arctic have consequences for Arctic Council states aiming to mitigate and adapt to climate change in the north. The conclusions from our synthesis are the following. (1) Current and future Arctic fires, and the adjacent boreal region, are driven by natural (i.e. lightning) and human-caused ignition sources, including fires caused by timber and energy extraction, prescribed burning for landscape management, and tourism activities. Little is published in the scientific literature about cultural burning by Indigenous populations across the pan-Arctic, and questions remain on the source of ignitions above 70_ N in Arctic Russia. (2) Climate change is expected to make Arctic fires more likely by increasing the likelihood of extreme fire weather, increased lightning activity, and drier vegetative and ground fuel conditions. (3) To some extent, shifting agricultural land use and forest transitions from forest–steppe to steppe, tundra to taiga, and coniferous to deciduous in a warmer climate may increase and decrease open biomass burning, depending on land use in addition to climate-driven biome shifts. However, at the country and landscape scales, these relationships are not well established. (4) Current black carbon and PM2:5 emissions from wildfires above 50 and 65_ N are larger than emissions from heanthropogenic sectors of residential combustion, transportation, and flaring. Wildfire emissions have increased from 2010 to 2020, particularly above 60_ N, with 56% of black carbon emissions above 65_ N in 2020 attributed to open biomass burning – indicating how extreme the 2020 wildfire season was and how severe future Arctic wildfire seasons can potentially be. (5) What works in the boreal zones to prevent and fight wildfires may not work in the Arctic. Fire management will need to adapt to a changing climate, economic development, the Indigenous and local communities, and fragile northern ecosystems, including permafrost and peatlands. (6) Factors contributing to the uncertainty of predicting and quantifying future Arctic fire regimes include underestimation of Arctic fires by satellite systems, lack of agreement between Earth observations and official statistics, and still needed refinements of location, conditions, and previous fire return intervals on peat and permafrost landscapes. This review highlights that much research is needed in order to understand the local and regional impacts of the changing Arctic fire regime on emissions and the global climate, ecosystems, and pan-Arctic communities.

Arctic↗

Process Development and Hot-fire Testing of Additively Manufactured NASA HR-1 for Liquid Rocket Engine Applications

Additive manufacturing (AM) has provided new design and manufacturing opportunities to reduce cost and schedules, consolidate parts, and optimize performance. One technique being evaluated is Laser Powder Directed Energy Deposition (LP-DED), which provides a significant increase in scale compared to Laser Powder Bed Fusion (L-PBF). NASA along with industry partners have been developing the LP-DED process to demonstrate internal channel geometry and development components for use in liquid rocket engine channel cooled nozzles. Optimized materials in the extreme high pressure and hydrogen environment for liquid rocket engines remains a key challenge. NASA has advanced an enabling material called NASA HR-1 (Hydrogen Resistant -1) as a solution using AM techniques. NASA HR-1 is a high-strength Fe-Ni superalloy designed to resist high pressure, hydrogen environment embrittlement, oxidation, and corrosion. NASA HR-1 meets materials requirements for liquid rocket engine components, including good hydrogen resistance, high conductivity, good low cycle fatigue performance, and high elongation and strength for components in high heat flux environments. Material properties and process characterization have been completed on the high density thin-wall material in addition to advancements of the supply chain. NASA has also completed fabrication of several subscale and full-scale channel wall nozzles in LP-DED NASA HR-1 and completed hot-fire testing. This includes refinement of the process to produce thin-walls and various channel geometries to meet the requirements for channel wall nozzle applications. This paper will provide an overview of the LP-DED process development, material characterization and properties, component manufacturing, and hot-fire testing. Hot-fire testing was completed for a lander-class 7K-lbf thrust chamber using Liquid Oxygen (LOX)/Methane. The design overview and results from hot-fire testing will be presented in addition to hardware development for future testing on 2K-lbf and 35k-lbf thrust chambers and large-scale manufacturing technology demonstrators.

DED↗

Process Development and Hot-fire Testing of Additively Manufactured NASA HR-1 for Liquid Rocket Engine Applications

Additive manufacturing (AM) has provided new design and manufacturing opportunities to reduce cost and schedules, consolidate parts, and optimize performance. One technique being evaluated is Laser Powder Directed Energy Deposition (LP-DED), which provides a significant increase in scale compared to Laser Powder Bed Fusion (L-PBF). NASA along with industry partners have been developing the LP-DED process to demonstrate internal channel geometry and development components for use in liquid rocket engine channel cooled nozzles. Optimized materials in the extreme high pressure and hydrogen environment for liquid rocket engines remains a key challenge. NASA has advanced an enabling material called NASA HR-1 (Hydrogen Resistant -1) as a solution using AM techniques. NASA HR-1 is a high-strength Fe-Ni superalloy designed to resist high pressure, hydrogen environment embrittlement, oxidation, and corrosion. NASA HR-1 meets materials requirements for liquid rocket engine components, including good hydrogen resistance, high conductivity, good low cycle fatigue performance, and high elongation and strength for components in high heat flux environments. Material properties and process characterization have been completed on the high density thin-wall material in addition to advancements of the supply chain. NASA has also completed fabrication of several subscale and full-scale channel wall nozzles in LP-DED NASA HR-1 and completed hot-fire testing. This includes refinement of the process to produce thin-walls and various channel geometries to meet the requirements for channel wall nozzle applications. This paper will provide an overview of the LP-DED process development, material characterization and properties, component manufacturing, and hot-fire testing. Hot-fire testing was completed for a lander-class 7K-lbf thrust chamber using Liquid Oxygen (LOX)/Methane. The design overview and results from hot-fire testing will be presented in addition to hardware development for future testing on 2K-lbf and 35k-lbf thrust chambers and large-scale manufacturing technology demonstrators.

Additive Manufacturing↗

Optically controlling the competition between spin flips and intersite spin transfer in a Heusler half-metal on sub–100-fs time scales

The direct manipulation of spins via light may provide a path toward ultrafast energy-efficient devices. However, distinguishing the microscopic processes that can occur during ultrafast laser excitation in magnetic alloys is challenging. Here, we study the Heusler compound Co 2 MnGa, a material that exhibits very strong light-induced spin transfers across the entire M-edge. By combining the element specificity of extreme ultraviolet high-harmonic probes with time-dependent density functional theory, we disentangle the competition between three ultrafast light-induced processes that occur in Co 2 MnGa: same-site Co-Co spin transfer, intersite Co-Mn spin transfer, and ultrafast spin flips mediated by spin-orbit coupling. By measuring the dynamic magnetic asymmetry across the entire M-edges of the two magnetic sublattices involved, we uncover the relative dominance of these processes at different probe energy regions and times during the laser pulse. Our combined approach enables a comprehensive microscopic interpretation of laser-induced magnetization dynamics on time scales shorter than 100 femtoseconds.

36 MATERIALS SCIENCE↗

Milwaukee Urban Development: Assessing Climate Vulnerability through the InVEST Model on Urban Cooling in Milwaukee Using NASA Earth Observations

Milwaukee’s neighborhoods experience increased social, health, and ecological stress from the Urban Heat Island (UHI) effect due to changing land cover and climate. Extreme urban heat disproportionately affects Black and Latine communities due to systematic disinvestment in infrastructure and lack of resources to cope with heat. Our partner, Groundwork Milwaukee, supports Environmental Justice organizing around urban heat in historically redlined neighborhoods. This study explores heat mitigation in Metcalfe Park, one such neighborhood that is a focus area for our partner, as well as across the city and county of Milwaukee. Our team utilized the Natural Capital Project’s Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Model for urban cooling to model heat mitigation scenarios for Milwaukee in support of Groundwork’s climate resilience and heat mitigation work. The data inputs used in our analysis were Land Use Land Cover (LULC), evapotranspiration, and surface temperature derived from NASA Earth observations, as well as a biophysical table containing land cover class attributes. We developed a heat vulnerability index from American Community Survey datasets and satellite imagery to identify areas in most need of heat mitigation intervention. We found that central and northwest city areas, home to a majority of Milwaukee’s Black and Latine population, have low heat mitigation and high vulnerability to heat impacts compared to the rest of the county. We also found that tree canopy increases across scales are effective in promoting heat mitigation. Our results and end products will bolster the efforts of our partners to make decisions on heat mitigation strategies, build community resilience, and reverse legacies of environmental racism in the face of extreme heat and climate change.

urban heat island↗

Resolving the Large Scale Spectral Variability of the Luminous Seyfert 1 Galaxy 1H 0419-577: Evidence for a New Emission Component and Absorption by Cold Dense Matter

An XMM-Newton observation of the luminous Seyfert 1 galaxy 1H 0419-577 in September 2002, when the source was in an extreme low-flux state, found a very hard X-ray spectrum at 1-10 keV with a strong soft excess below -1 keV. Comparison with an earlier XMM-Newton observation when 1H 0419-577 was X-ray bright indicated the dominant spectral variability was due to a steep power law or cool Comptonised thermal emission. Four further XMM-Newton observations, with 1H 0419-577 in intermediate flux states, now support that conclusion, while we also find the variable emission component in intermediate state difference spectra to be strongly modified by absorption in low ionisation matter. The variable soft excess then appears to be an artefact of absorption of the underlying continuum while the core soft emission can be attributed to re- combination in an extended region of more highly ionised gas. We note the wider implications of finding substantial cold dense matter overlying (or embedded in) the X-ray continuum source in a luminous Seyfert 1 galaxy.

Pounds, K. A.↗

On the Structure–Property Relationship of Semi‐Coherent FeCr 2 O 4 /Cr 2 O 3 Spinel/Corundum Interfaces

Abstract Oxide heterointerfaces are extremely common in both natural and artificial composite structures, including corroded structural materials. Often, key properties such as segregation and atomic transport are dictated by the structure of these interfaces. However, despite this critical link, very few heterointerfaces have been studied in any detail at the atomic scale. Here, one important oxide heterointerface is examined, between spinel and corundum, using the chemical system FeCr 2 O 4 /Cr 2 O 3 as a representative and technologically important case. Using atomistic simulation techniques, it is found that the structure, particularly the local chemistry, of the interface depends on the crystal chemistry at the interface. This atomic and chemical structure further impacts important properties such as defect segregation and mass transport. It is found that defects can nucleate at some regions of these interfaces and migrate back and forth across the corundum layer, suggesting high atomic mobility that may be important for the evolution of spinel/corundum composite structures in extreme conditions.

36 MATERIALS SCIENCE↗

Femtoscopic study of the proton-proton and proton-deuteron systems in heavy-ion collisions at the LHC

This work reports femtoscopic correlations of p – – p ($\overline{p}$ – – $\overline{p}$) and p – – d ($\overline{p}$ – – $\overline{d}$) pairs measured in Pb–Pb collisions at center-of-mass energy per nucleon $\sqrt{s_{NN}}$ = 5.02 TeV in the ALICE Collaboration. A fit to the measured proton-proton correlation functions allows one to extract the dependence of the nucleon femtoscopic radius of the particle-emitting source on the pair transverse mass (m T ) and on the average charge particle multiplicity $\langle$dN ch /dη$\rangle$ 1/3 for three centrality intervals (0–10%, 10 – – 30 %, 30 – – 50 %). In both cases, the expected power-law and linear scalings are observed, respectively. The measured p–d correlations can be described by both two- and three-body calculations, indicating that the femtoscopy observable is not sensitive to the short-distance features of the dynamics of the p-(p-n) system, due to the large inter-particle distances in Pb–Pb collisions at the LHC. Indeed, in this study, the minimum measured femtoscopic source sizes for protons and deuterons have a minimum value at 2.73$^{+0.05}_{–0.05}$ and 3.10$^{+1.04}_{–0.86}$ fm, respectively, for the 30–50% centrality collisions. Moreover, the m T -scaling obtained for the p–p and p–d systems is compatible within 1σ of the uncertainties. These findings provide new input for fundamental studies on the production of light (anti)nuclei under extreme conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Future Atmospheric Rivers and Impacts on Precipitation: Overview of the ARTMIP Tier 2 High–Resolution Global Warming Experiment

Atmospheric rivers (ARs) are long, narrow synoptic scale weather features important for Earth’s hydrological cycle typically transporting water vapor poleward, delivering precipitation important for local climates. Understanding ARs in a warming climate is problematic because the AR response to climate change is tied to how the feature is defined. The Atmospheric River Tracking Method Intercomparison Project (ARTMIP) provides insights into this problem by comparing 16 atmospheric river detection tools (ARDTs) to a common data set consisting of high resolution climate change simulations from a global atmospheric general circulation model. ARDTs mostly show increases in frequency and intensity, but the scale of the response is largely dependent on algorithmic criteria. Across ARDTs, bulk characteristics suggest intensity and spatial footprint are inversely correlated, and most focus regions experience increases in precipitation volume coming from extreme ARs. The spread of the AR precipitation response under climate change is large and dependent on ARDT selection.

54 ENVIRONMENTAL SCIENCES↗

Traversable wormholes in four dimensions

Here, we present a wormhole solution in four dimensions. It is a solution of an Einstein Maxwell theory plus charged massless fermions. The fermions give rise to a negative Casimir-like energy, which makes the wormhole possible. It is a long wormhole that does not lead to causality violations in the ambient space. It can be viewed as a pair of entangled near extremal black holes with an interaction term generated by the exchange of fermion fields. The solution can be embedded in the Standard Model by making its overall size small compared to the electroweak scale.

79 ASTRONOMY AND ASTROPHYSICS↗