Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPONENTIAL FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Analysis of the interaction of a laser pulse with a silicon wafer - Determination of bulk lifetime and surface recombination velocity

The decay of excess minority carriers produced in a silicon wafer of thickness d by a laser pulse is analyzed. A comprehensive theory based on this analysis is presented for the determination of bulk lifetime Tau(b) and surface recombination velocity S. It is shown that, starting with an exponential spatial profile, the carrier profile assumes a spatially symmetrical form after approximately one time constant of the fundamental mode of decay. Expressions for the spatial average of the carrier density as a function of time are derived for three temporal laser pulse shapes: impulse, square, and Gaussian. Particular attention is paid to the time constants of the fundamental and higher modes of decay. The ratios of the time constants of the higher modes to the fundamental mode, as well as the time constant of the fundamental mode, are presented over wide ranges of values of S and d. For Sd less than about 40 sq cm/s, a two-wafer method is developed to determine Tau(b) and S; it is also shown that the requirement of d/Tau(b) greater than about 20S is sufficient to adequately guarantee that the asymptotic value of the instantaneous observed lifetime differs from the bulk lifetime by no more than 10 percent.

Luke, Keung L.↗

Rapid exploration of curvilinear grids using direct volume rendering

Fast techniques for direct volume rendering over curvilinear grids of hexahedral cells are developed. This type of 3D grid is common in computational fluid dynamics and finite element analysis. Four new projection methods are presented and compared with each other and with previous methods for tetrahedral grids and rectilinear grids. All four methods use polygon-rendering hardware for speed. A simplified algorithm for visibility ordering, which is based on a combination of breadth-first and depth-first searches, is described. A new multi-pass blending method is described that reduces visual artifacts that are introduced by linear interpolation in hardware where exponential interpolation is needed. Multi-pass blending is of equal interest to hardware-oriented projection methods used on rectilinear grids. Visualization tools that permit rapid data banding and cycling through transfer functions, as well as region restrictions, are described.

Vangelder, Allen↗

The Ultra-Luminous X-ray Source Population from the Chandra Archive of Galaxies

One hundred fifty-four discrete non-nuclear Ultra-Luminous X-ray (ULX) sources, with spectroscopically-determined intrinsic X-ray luminosities greater than 1 e39 ergs/s, are identified in 82 galaxies observed with Chandra's Advanced CCD Imaging Spectrometer. Source positions, X-ray luminosities, and spectral and timing characteristics are tabulated. Statistical comparisons between these X-ray properties and those of the weaker discrete sources in the same fields (mainly neutron star and stellar-mass black hole binaries) are made. Sources above approximately le38 ergs per second display similar spatial, spectral, color, and variability distributions. In particular, there is no compelling evidence in the sample for a new and distinct class of X-ray object such as the intermediate-mass black holes. 83% of ULX candidates have spectra that can be described as absorbed power laws with index = 1.74 and column density = 2.24e21 l per square centimeter, or approximately 5 times the average Galactic column. About 20% of the ULX's have much steeper indices indicative of a soft, and likely thermal, spectrum. The locations of ULXs in their host galaxies are strongly peaked towards their galaxy centers. The deprojected radial distribution of the ULX candidates is somewhat steeper than an exponential disk, indistinguishable from that of the weaker sources. About 5--15% of ULX candidates are variable during the Chandra observations (which average 39.5 ks). Comparison of the cumulative X-ray luminosity functions of the ULXs to Chandra Deep Field results suggests approximately 25% of the sources may be background objects including 14% of the ULX candidates in the sample of spiral galaxies and 44% of those in elliptical galaxies implying the elliptical galaxy ULX population is severely compromised by background active galactic nuclei. Correlations with host galaxy properties confirm the number and total X-ray luminosity of the ULXs are associated with recent star formation and with galaxy merging and interactions. The preponderance of ULXs in star-forming galaxies as well as their similarities to less-luminous sources suggest they originate in a young but short-lived population such as the high-mass X-ray binaries with a smaller contribution (based on spectral slope) from recent supernovae. The number of ULXs in elliptical galaxies scales with host galaxy mass and can be explained most simply as the high-luminosity end of the low-mass X-ray binary population.

Swartz, Douglas A.↗

Stochastic Representation of Chaos using Terminal Attractors

A nonlinear version of the Liouville equation based upon terminal attractors is proposed for describing post-instability motions of dynamical systems with exponential divergence of trajectories such as those leading to chaos and turbulence. As a result, the post-instability motions are represented by expectations, variances, and higher moments of the state variables as functions of time. The proposed approach can be applied to conservative chaos, and in particular, to n-bodies problem, as well as to dissipative systems, and in particular, to chaotic attractors and turbulence.

stochastic processes↗

THE TWO STATES OF STAR-FORMING CLOUDS

We examine the effects of self-gravity and magnetic fields on supersonic turbulence in isothermal molecular clouds with high-resolution simulations and adaptive mesh refinement. These simulations use large root grids (512{sup 3}) to capture turbulence and four levels of refinement to follow the collapse to high densities, for an effective resolution of 8192{sup 3}. Three Mach 9 simulations are performed, two super-Alfvenic and one trans-Alfvenic. We find that gravity splits the clouds into two populations, one low-density turbulent state and one high-density collapsing state. The low-density state exhibits properties similar to non-self-gravitating in this regime, and we examine the effects of varied magnetic field strength on statistical properties: the density probability distribution function is approximately lognormal, the velocity power spectral slopes decrease with decreasing mean field strength, the alignment between velocity and magnetic field increases with the field, and the magnetic field probability distribution can be fitted to a stretched exponential. The high-density state is well characterized by self-similar spheres: the density probability distribution is a power law, collapse rate decreases with increasing mean field, density power spectra have positive slopes, P({rho}, k){proportional_to}k, thermal-to-magnetic pressure ratios are roughly unity for all mean field strengths, dynamic-to-magnetic pressure ratios are larger than unity for all mean field strengths, the magnetic field distribution follows a power-law distribution. The high Alfven Mach numbers in collapsing regions explain the recent observations of magnetic influence decreasing with density. We also find that the high-density state is typically found in filaments formed by converging flows, consistent with recent Herschel observations. Possible modifications to existing star formation theories are explored. The overall trans-Alfvenic nature of star-forming clouds is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Observational constraints on assisted k-inflation

We study observational constraints on the assisted k-inflation models in which multiple scalar fields join an attractor characterized by an effective single field {phi}. This effective single-field system is described by the Lagrangian P=Xg(Y), where X is the kinetic energy of {phi}, {lambda} is a constant, and g is an arbitrary function in terms of Y=Xe{sup {lambda}{phi}}. Our analysis covers a wide variety of k-inflation models such as dilatonic ghost condensate, Dirac-Born-Infeld field, and tachyon, as well as the canonical field with an exponential potential. We place observational bounds on the parameters of each model from the WMAP 7yr data combined with baryon acoustic oscillations and the Hubble constant measurement. Using the observational constraints of the equilateral non-Gaussianity parameter f{sub NL}{sup equil}, we further restrict the allowed parameter space of dilatonic ghost condensate and Dirac-Born-Infeld models. We extend the analysis to more general models with several different choices of g(Y) and show that the models such as g(Y)=c{sub 0}+c{sub p}Y{sup p} (p{>=}3) are excluded by the joint data analysis of the scalar/tensor spectra and primordial non-Gaussianities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Legendre-Tau approximation for functional differential equations. Part 3: Eigenvalue approximations and uniform stability

The stability and convergence properties of the Legendre-tau approximation for hereditary differential systems are analyzed. A charactristic equation is derived for the eigenvalues of the resulting approximate system. As a result of this derivation the uniform exponential stability of the solution semigroup is preserved under approximation. It is the key to obtaining the convergence of approximate solutions of the algebraic Riccati equation in trace norm.

Ito, K.↗

Quantitative analysis of the reconstruction performance of interpolants

The analysis presented provides a quantitative measure of the reconstruction or interpolation performance of linear, shift-invariant interpolants. The performance criterion is the mean square error of the difference between the sampled and reconstructed functions. The analysis is applicable to reconstruction algorithms used in image processing and to many types of splines used in numerical analysis and computer graphics. When formulated in the frequency domain, the mean square error clearly separates the contribution of the interpolation method from the contribution of the sampled data. The equations provide a rational basis for selecting an optimal interpolant; that is, one which minimizes the mean square error. The analysis has been applied to a selection of frequently used data splines and reconstruction algorithms: parametric cubic and quintic Hermite splines, exponential and nu splines (including the special case of the cubic spline), parametric cubic convolution, Keys' fourth-order cubic, and a cubic with a discontinuous first derivative. The emphasis in this paper is on the image-dependent case in which no a priori knowledge of the frequency spectrum of the sampled function is assumed.

Lansing, Donald L.↗

Greenhouse Gas Concentration Data Recovery Algorithm for a Low Cost, Laser Heterodyne Radiometer

The goal of a coordinated effort between groups at GWU and NASA GSFC is the development of a low-cost, global, surface instrument network that continuously monitors three key carbon cycle gases in the atmospheric column: carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), as well as oxygen (O2) for atmospheric pressure profiles. The network will implement a low-cost, miniaturized, laser heterodyne radiometer (mini-LHR) that has recently been developed at NASA Goddard Space Flight Center. This mini-LHR is designed to operate in tandem with the passive aerosol sensor currently used in AERONET (a well established network of more than 450 ground aerosol monitoring instruments worldwide), and could be rapidly deployed into this established global network. Laser heterodyne radiometry is a well-established technique for detecting weak signals that was adapted from radio receiver technology. Here, a weak light signal, that has undergone absorption by atmospheric components, is mixed with light from a distributed feedback (DFB) telecommunications laser on a single-mode optical fiber. The RF component of the signal is detected on a fast photoreceiver. Scanning the laser through an absorption feature in the infrared, results in a scanned heterodyne signal io the RF. Deconvolution of this signal through the retrieval algorithm allows for the extraction of altitude contributions to the column signal. The retrieval algorithm is based on a spectral simulation program, SpecSyn, developed at GWU for high-resolution infrared spectroscopies. Variations io pressure, temperature, composition, and refractive index through the atmosphere; that are all functions of latitude, longitude, time of day, altitude, etc.; are modeled using algorithms developed in the MODTRAN program developed in part by the US Air Force Research Laboratory. In these calculations the atmosphere is modeled as a series of spherically symmetric shells with boundaries specified at defined altitudes. Temperature, pressure, and species mixing ratios are defined at these boundaries. Between the boundaries, temperature is assumed to vary linearly with altitude while pressure (and thus gas density) vary exponentially. The observed spectrum at the LHR instrument will be the integration of the contributions along this light path. For any absorption measurement the signal at a particular spectral frequency is a linear combination of spectral line contributions from several species. For each species that might absorb in a spectral region, we have pre-calculated its contribution as a function of temperature and pressure. The integrated path absorption spectrum can then by calculated using the initial sun angle (from location, date, and time) and assumptions about pressure and temperature profiles from an atmospheric model. The modeled spectrum is iterated to match the experimental observation using standard multilinear regression techniques. In addition to the layer concentrations, the numerical technique also provides uncertainty estimates for these quantities as well as dependencies on assumptions inherent in the atmospheric models.

Miller, J. Houston↗

The long-term centimeter variability of active galactic nuclei: a new relation between variability timescale and accretion rate

We study the long-term (≈30 years) radio variability of 43 radio-bright active galactic nuclei (AGNs) by exploiting the database of the University of Michigan Radio Astronomy Observatory monitoring program. We model the periodograms (temporal power spectra) of the observed light curves as simple power-law noise (red noise, spectral power P(f)∝f{sup −β}) using Monte Carlo simulations, taking into account windowing effects (red-noise leak, aliasing). The power spectra of 39 (out of 43) sources are in good agreement with the models, yielding a range in power spectral index (β) from ≈1 to ≈3. We fit a Gaussian function to each flare in a given light curve to obtain the flare duration. We discover a correlation between β and the median duration of the flares. We use the derivative of a light curve to obtain a characteristic variability timescale, which does not depend on the assumed functional form of the flares, incomplete fitting, and so on. We find that, once the effects of relativistic Doppler boosting are corrected for, the variability timescales of our sources are proportional to the accretion rate to the power of 0.25 ± 0.03 over five orders of magnitude in accretion rate, regardless of source type. We further find that modeling the periodograms of four of our sources requires the assumption of broken power-law spectra. From simulating light curves as superpositions of exponential flares, we conclude that strong overlap of flares leads to featureless simple power-law periodograms of AGNs at radio wavelengths in most cases.

79 ASTRONOMY AND ASTROPHYSICS↗

A near-stationary subspace for ridge approximation

Response surfaces are common surrogates for expensive computer simulations in engineering analysis. However, the cost of fitting an accurate response surface increases exponentially as the number of model inputs increases, which leaves response surface construction intractable for high-dimensional, nonlinear models. Here we describe ridge approximation for fitting response surfaces in several variables. A ridge function is constant along several directions in its domain, so fitting occurs on the coordinates of a low-dimensional subspace of the input space. We review essential theory for ridge approximation – e.g., the best mean-squared approximation and an optimal low-dimensional subspace – and we prove that the gradient-based active subspace is near-stationary for the least-squares problem that defines an optimal subspace. Motivated by the theory, we propose a computational heuristic that uses an estimated active subspace as an initial guess for a ridge approximation fitting problem. We show a simple example where the heuristic fails, which reveals a type of function for which the proposed approach is inappropriate. We then propose a simple alternating heuristic for fitting a ridge function, and we demonstrate the effectiveness of the active subspace initial guess applied to an airfoil model of drag as a function of its 18 shape parameters.

42 ENGINEERING↗

Extreme Decoherence and Quantum Chaos

Here, we study the ultimate limits to the decoherence rate associated with dephasing processes. Fluctuating chaotic quantum systems are shown to exhibit extreme decoherence, with a rate that scales exponentially with the particle number, thus exceeding the polynomial dependence of systems with fluctuating k -body interactions. Our findings suggest the use of quantum chaotic systems as a natural test bed for spontaneous wave function collapse models. Lastly, we further discuss the implications on the decoherence of AdS/CFT black holes resulting from the unitarity loss associated with energy dephasing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The impacts of rising vapour pressure deficit in natural and managed ecosystems

Abstract An exponential rise in the atmospheric vapour pressure deficit (VPD) is among the most consequential impacts of climate change in terrestrial ecosystems. Rising VPD has negative and cascading effects on nearly all aspects of plant function including photosynthesis, water status, growth and survival. These responses are exacerbated by land–atmosphere interactions that couple VPD to soil water and govern the evolution of drought, affecting a range of ecosystem services including carbon uptake, biodiversity, the provisioning of water resources and crop yields. However, despite the global nature of this phenomenon, research on how to incorporate these impacts into resilient management regimes is largely in its infancy, due in part to the entanglement of VPD trends with those of other co‐evolving climate drivers. Here, we review the mechanistic bases of VPD impacts at a range of spatial scales, paying particular attention to the independent and interactive influence of VPD in the context of other environmental changes. We then evaluate the consequences of these impacts within key management contexts, including water resources, croplands, wildfire risk mitigation and management of natural grasslands and forests. We conclude with recommendations describing how management regimes could be altered to mitigate the otherwise highly deleterious consequences of rising VPD.

54 ENVIRONMENTAL SCIENCES↗

Through the lens of bioenergy crops: advances, bottlenecks, and promises of plant engineering

Advances in engineering of bioenergy crops were driven over the past years by adapting technological breakthroughs and accelerating conventional applications but also exposed intriguing challenges. New tools revealed rich interconnectivity in the exponentially growing and dynamic 'big' omics data' of metabolomes, transcriptomes, and genomes at previously inaccessible magnitude (global, cross-species, meta-) and resolution (single cell). Insights enabled fresh hypotheses and stimulated disciplines such as functional genomics with discovery of broad regulatory networks and their determinants, that is, DNA parts, including promoters, regulatory elements, and transcription factors. Their rational design, assembly into increasingly complex blueprints, and installation into diverse chassis is an existing frontier that may benefit from emerging technologies to address bottlenecks. Interweaving nature-inspired to fully synthetic parts has already allowed building of fine-tuned regulatory circuits, or new-to-nature metabolic routes insulated from the biological context of the chassis species. Similarly, developments and the evolving need for unifying principles in plant transformation and species-agnostic technologies highlight future opportunities for engineering the next generation of bioenergy plants.

60 APPLIED LIFE SCIENCES↗

Two-color field enhancement at an STM junction for spatiotemporally resolved photoemission

Here, we report measurements and numerical simulations of ultrafast laser-excited carrier flow across a scanning tunneling microscope (STM) junction. The current from a nanoscopic tungsten tip across a ~1 nm vacuum gap to a silver surface is driven by a two-color excitation scheme that uses an optical delay-modulation technique to extract the two-color signal from background contributions. The role of optical field enhancements in driving the current is investigated using density functional theory and full three-dimensional finite-difference time-domain computations. We find that simulated field-enhanced two-photon photoemission (2PPE) currents are in excellent agreement with the observed exponential decay of the two-color photoexcited current with increasing tip–surface separation, as well as its optical-delay dependence. The results suggest an approach to 2PPE with simultaneous subpicosecond temporal and nanometer spatial resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BigData Express: Toward Predictable, Schedulable, and High-Performance Data Transfer [Slides]

Big data has emerged as a driving force for scientific discoveries. Large scientific instruments (e.g., colliders, and telescopes) generate exponentially increasing volumes of data. To enable scientific discovery, science data must be collected, indexed, archived, shared, and analyzed, typically in a widely distributed and highly collaborative manner. Data transfer is now an essential function for science discoveries, particularly within big data environments. To support data transfer for big data science, there is a need for predictable, high performance, scalable, end-to-end, programmable networks that enable science applications to use network resources most efficiently. Software-Defined Networking (SDN) is a novel network architecture and technological approach that separates the network control and data planes.

97 MATHEMATICS AND COMPUTING↗

A novel nonperturbative renormalization scheme for local operators

The gradient flow exponentially suppresses ultraviolet field fluctuations and removes ultraviolet divergences (up to a multiplicative fermionic wavefunction renormalization). It can be used to describe real-space Wilsonian renormalization group transformations and determine the corresponding beta function. We propose a new nonperturbative renormalization scheme for local composite fermionic operators that uses the gradient flow and is amenable to lattice QCD calculations. We present preliminary nonperturbative results for the running of quark bilinear operators in this scheme and outline the calculation of perturbative matching to the MS-bar scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Spiral Galaxies Flat Rotational Velocity Curve Explained by the Constant Group Velocity of a Nonlinear Density Wave

The rotation velocity curves of stars in galaxies, the motions of pairs of galaxies, and the behavior of galaxies in clusters and super-clusters all indicate that there is a lack of mass on different scales in the universe. In this paper, we derive the expression for rotational velocity using the nonlinear density wave theory considering only stellar components and we show that such theory can support the observed flat rotational velocity curve due to the main property of the soliton wave, which is a constant group velocity of the wave. The surface mass density (SMD) function, used to derive gravitational potential gradient and rotational velocity, is not assumed but rather derived as a solution of the nonlinear Srödinger equation, on the contrary to the widely used, in the literature, exponential disk approximation. Three parameters relevant to the curve shape are the intensities of equilibrium SMD, the amplitude of the wave, and total angular velocity or differential rotation, equivalently. Since the shape of the rotational velocity is highly sensitive to the mentioned parameters, this theory eventually provides a method for a very accurate estimation of galaxy mass and angular velocity as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗