Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Soft materials with recoverable shape factors from extreme distortion states

We present elastomeric polysiloxane nanocomposites with elongations of >5000% (more than 3× greater than any previously reported material) with excellent shape recovery. Highly deformable materials are desirable for the fabrication of stretchable implants and microfluidic devices. No crosslinking or domain formation is observed by a variety of analytical techniques, suggesting that their elastomeric behavior is caused by polymer chain entanglements.

36 MATERIALS SCIENCE↗

Anatomy of Ag/Hafnia-Based Selectors with 10 10 Nonlinearity

We developed a novel Ag/oxide-based threshold switching device with attractive features including ≈10 10 nonlinearity. Furthermore, in a high-resolution transmission electron microscopic analysis of the nanoscale crosspoint device it is suggested that elongation of an Ag nanoparticle under voltage bias followed by spontaneous reformation of a more spherical shape after power off, is responsible for the observed threshold switching.

36 MATERIALS SCIENCE↗

Fast Deposition of Aligning Edge‐On Polymers for High‐Mobility Ambipolar Transistors

Abstract Fast deposition of aligning ambipolar polymers for high‐performance organic field‐effect transistors (OFETs) and inverter circuits are highly desired for both scientific studies and industry applications. Here, large‐area and ordered polymer films are prepared by a bar‐coating method at a rate of 120 mm s −1 in air. Atomic force microscopy and grazing‐incidence wide‐angle X‐ray scattering analysis indicate uniform edge‐on poly(fluoroisoindigo‐difluorobithiophene‐fluoroisoindigo‐bithiophene) (PFIBI‐BT) in 11.7 ± 1 nm film (≈5 layers). The elongated, uniformly oriented grains can reduce the adverse effects of the grain boundaries and facilitate charge transport in polymers. Furthermore, OFETs based on parallel film show high hole/electron mobilities up to 5.5/4.5 cm 2 V −1 s −1 , which are approximately nine times of the devices prepared by spin‐coating. The gain of the inverter is as high as 174, which is one of the highest values in polymer inventers currently. These results demonstrate that the excellent bipolar performance of few‐layer PFIBI‐BT can be ensured while achieving the compatibility of the experimental process with industrial preparation.

Jiang, Yingying↗

Poly(vinyl alcohol) Hydrogels with Broad-Range Tunable Mechanical Properties via the Hofmeister Effect

Hydrogels, exhibiting wide applications in soft robotics, tissue engineering, implantable electronics, etc., often require sophisticately tailoring of the hydrogel mechanical properties to meet specific demands. For examples, soft robotics necessitates tough hydrogels; stem cell culturing demands various tissue-matching modulus; and neuron probes desire dynamically tunable modulus. Herein, a strategy to broadly alter the mechanical properties of hydrogels reversibly via tuning the aggregation states of the polymer chains by ions based on the Hofmeister effect is reported. An ultratough poly(vinyl alcohol) (PVA) hydrogel as an exemplary material (toughness 150 ± 20 MJ m -3 ), which surpasses synthetic polymers like poly(dimethylsiloxane), synthetic rubber, and natural spider silk is fabricated. With various ions, the hydrogel's various mechanical properties are continuously and reversibly in situ modulated over a large window: tensile strength from 50 ± 9 kPa to 15 ± 1 MPa, toughness from 0.0167 ± 0.003 to 150 ± 20 MJ m -3 , elongation from 300 ± 100% to 2100 ± 300%, and modulus from 24 ± 2 to 2500 ± 140 kPa. Importantly, the ions serve as gelation triggers and property modulators only, not necessarily required to remain in the gel, maintaining the high biocompatibility of PVA without excess ions. Overall, this strategy, enabling high mechanical performance and broad dynamic tunability, presents a universal platform for broad applications from biomedicine to wearable electronics.

36 MATERIALS SCIENCE↗

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. In this paper, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

36 MATERIALS SCIENCE↗

Observation of Topological Chirality Switching Induced Freezing of a Skyrmion Crystal

Magnetic skyrmions are topologically protected quasi-particles with a well-defined chirality. Control over their chirality is proposed as an additional feature for encoding data bits or as qubits in quantum computing due to their high efficiency and stability against achiral magnetic textures. Here it is shown that an in-plane magnetic field can be utilized to reshape the energy barriers between different skyrmionic bubbles (e.g., Bloch type, type-II) enabling spontaneous chirality fluctuations with a frequency that increases with the strength of the in-plane field. The insulating van der Waals ferromagnet CrBr3 is used as an archetypal system for low damping, reduced energy dissipation and a high number of magnetic phases to capture the chirality dynamics in real time through cryo-Lorentz transmission electron microscopy. It is observed that the interplay between the intrinsic Dzyaloshinskii–Moriya interaction and out-of-plane field biased the chirality dynamics, favoring one handedness over the other. A remarkable consequence of the spontaneous chirality switching mechanism is that it induces a freezing (or crystallization) process in the skyrmion lattice. As the bubbles fluctuate between Bloch and type-II they elongate and shrink parallel to the in-plane field. Subsequently, the overall lattice crystallizes along the in-plane field direction, inducing a phase transition from a disordered liquid state to a hexatic phase where skyrmions are highly ordered resembling that of a solid. The results indicate chirality as an active element in the creation of topologically protected skyrmion crystals unveiling pathways toward chiral spintronic device platforms with tunable embedded configuration.

2D Phase Transition↗

Ultrafast Jahn‐Teller Photoswitching in Cobalt Single‐Ion Magnets

Abstract Single‐ion magnets (SIMs) constitute the ultimate size limit in the quest for miniaturizing magnetic materials. Several bottlenecks currently hindering breakthroughs in quantum information and communication technologies could be alleviated by new generations of SIMs displaying multifunctionality. Here, ultrafast optical absorption spectroscopy and X‐ray emission spectroscopy are employed to track the photoinduced spin‐state switching of the prototypical complex [Co(terpy) 2 ] 2+ (terpy = 2,2′:6′,2″‐terpyridine) in solution phase. The combined measurements and their analysis supported by density functional theory (DFT), time‐dependent‐DFT (TD‐DFT) and multireference quantum chemistry calculations reveal that the complex undergoes a spin‐state transition from a tetragonally elongated doublet state to a tetragonally compressed quartet state on the femtosecond timescale, i.e., it sustains ultrafast Jahn‐Teller (JT) photoswitching between two different spin multiplicities. Adding new Co‐based complexes as possible contenders in the search for JT photoswitching SIMs will greatly widen the possibilities for implementing magnetic multifunctionality and eventually controlling ultrafast magnetization with optical photons.

36 MATERIALS SCIENCE↗

In‐Plane Anisotropy in van der Waals NiTeSe Ternary Alloy

Abstract The anisotropic properties of materials profoundly influence their electronic, magnetic, optical, and mechanical behaviors and are critical for a wide range of applications. In this study, the anisotropic characteristics of Ni‐based van der Waals materials, specifically NiTe 2 and its alloy NiTeSe, utilizing a combination of comprehensive scanning tunneling microscopy (STM), angle‐resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) calculations, are explored. Unlike 1T‐NiTe 2 , which exhibits trigonal in‐plane symmetry, the substitution of Te with Se in NiTe 2 (resulting in the NiTeSe alloy) induces a pronounced in‐plane anisotropy. This anisotropy is clear in the STM topographs, which reveal a distinct linear order of charge distribution. Corroborating these observations, ARPES measurements and DFT calculations reveal an anisotropic Fermi surface centered at the point, which is notably elongated along the k y direction, leading to directional variations in in‐plane carrier velocities. Consequently, the Fermi velocity is highest along the k x direction where the linear charge distribution aligns in real space and is lowest along the k y direction. These findings offer valuable insights into the tunability of anisotropic properties in ternary transition metal dichalcogenide systems, highlighting their potential applications in the development of anisotropic electronic and optoelectronic devices.

Chemistry↗

Molecular Precision Engineering for Efficient Binary Organic Photovoltaics through Energy Level and Fibrillar Structure Modulation

Adjusting the energy levels and fibrillar morphology is paramount to enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). In the present study, an increase in the open-circuit voltage (VOC) is facilitated through the elongation of the alkyl chain within AQx (namely AQx-8), aiming to decrease the free volume ratio (FVR). This reduction in FVR attenuates electron-phonon coupling, thereby augmenting emission efficiency and diminishing the non-radiative energy loss (ΔEnr). To further refine the energy levels and morphological characteristics, the external undecyl chain of AQx-8 is substituted with a shorter carbon chain and cyclohexane noted for its considerable steric hindrance (AQx-H). Additionally, this alteration significantly mitigates intermolecular aggregation, expands the bandgap, and elevates the lowest unoccupied molecular orbital (LUMO) energy level, culminating in an elevated VOC of 0.923 V in devices based on AQx-H. Morphological analysis reveals that blends based on AQx-H exhibit an enhanced multi-length-scale fibrillar structure, which is conducive to exciton dissociation and charge transport, thereby contributing to a high fill factor (FF) nearing 80%. Consequently, this study reports one of the highest binary PCEs documented, standing at 19.5% (with certification at 19.0%).

14 SOLAR ENERGY↗

Open source implementation of glued sphere discrete element method and nonspherical biomass fast pyrolysis simulation

Here, in this research, a glued-sphere Discrete Element Method (DEM) method was implemented in the open-source, Computational Fluid Dynamics (CFD) software MFiX. The implementation was verified using a cylinder-wall collision and then validated by simulating the packing and fluidization of non-spherical particles. The validated code was applied to simulate fast pyrolysis of non-spherical biomass particles in a bubbling fluidized bed. The glued sphere occupancy ratio was proposed to quantify the quality of shape resolution using glued sphere. Shape resolution showed significant influence on the packing height in the simulation of particle packing and an occupancy ratio of 80 % was recommended. Its influence is minor in fully fluidized bed but can be 8 times higher in fixed fluidized bed. Three tested heat transfer models predicted similar yields of elongated biomass fast pyrolysis. The solver developed in this research can be used to simulate other multiphase reacting flows involving non-spherical particles.

42 ENGINEERING↗

Supramolecular Modulation of Structural Polymorphism in Pathogenic α‐Synuclein Fibrils Using Copper(II) Coordination

Abstract Structural variation of α‐synuclein (αSyn) fibrils has been linked to the diverse etiologies of synucleinopathies. However, little is known about what specific mechanism provides αSyn fibrils with pathologic features. Herein, we demonstrate Cu(II)‐based supramolecular approach for unraveling the formation process of pathogenic αSyn fibrils and its application in a neurotoxic mechanism study. The conformation of αSyn monomer was strained by macrochelation with Cu(II), thereby disrupting the fibril elongation while promoting its nucleation. This non‐canonical process formed shortened, β‐sheet enriched αSyn fibrils (<0.2 μm) that were rapidly transmitted and accumulated to neuronal cells, causing neuronal cell death, in sharp contrast to typical αSyn fibrils (ca. 1 μm). Our approach provided the supramolecular basis for the formation of pathogenic fibrils through physiological factors, such as brain Cu(II).

Choi, Tae Su↗

Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single‐Molecule Spectroscopy

Abstract The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single‐catalyst‐level behavior is hidden by the bulk catalytic behavior. Here, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single‐catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single‐chain‐elongation or a single‐chain‐termination event during ruthenium‐catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single‐molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time‐variable.

Garcia, IV, Antonio↗

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Abstract Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd δ + (0< δ <2) that has greatly enhanced activity for methane oxidation: T 50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd δ + site is related to its oxygen‐deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

Yang, Weiwei↗

Pressure-induced sequential orbital reorientation in a magnetic framework material.

Pressure has been applied to manipulate the structure-property relationship of the copper(II)-based coordination network CuF{sub 2}(H{sub 2}O){sub 2}(pyz) (pyz=pyrazine). The elongated Jahn-Teller axis was found to switch sequentially from the NCuN (<0.9 GPa), to the O-Cu-O (0.9-3.1 GPa), to the F-Cu-F bonds (>3.1 GPa; see picture). This orbital reordering leads to a drastic change in the magnetic properties, whereby the magnetic structure changes from two-dimensional to one-dimensional above 0.9 GPa.

36 MATERIALS SCIENCE↗

Visualizing the chain-flipping mechanism in fatty-acid biosynthesis

The acyl carrier protein (ACP) from fatty acid synthases sequesters elongating products within its hydrophobic core, but this dynamic mechanism remains poorly understood. In this paper, we exploited solvatochromic pantetheine probes attached to ACP that fluoresce when sequestered. The addition of a catalytic partner lures the cargo out of the ACP and into the active site of the enzyme, thus enhancing fluorescence to reveal the elusive chain-flipping mechanism. This activity was confirmed by the use of a dual solvatochromic cross-linking probe and solution-phase NMR spectroscopy. Finally, the chain-flipping mechanism was visualized by single-molecule fluorescence techniques, thus demonstrating specificity between the Escherichia coli ACP and its ketoacyl synthase catalytic partner KASII.

59 BASIC BIOLOGICAL SCIENCES↗

Facile Recoding of Selenocysteine in Nature

Selenocysteine (Sec or U) is encoded by UGA, a stop codon reassigned by a Sec-specific elongation factor and a distinctive RNA structure. To discover possible code variations in extant organisms we analyzed 6.4 trillion base pairs of metagenomic sequences and 24,903 microbial genomes for tRNASec species. As expected, UGA is the predominant Sec codon in use. We also found tRNASec species that recognize the stop codons UAG and UAA, and ten sense codons. Selenoprotein synthesis programmed by UAG in Geodermatophilus and Blastococcus, and by the Cys codon UGU in Aeromonas salmonicida was confirmed by metabolic labeling with 75Se or mass spectrometry. Other tRNASec species with different anticodons enabled Escherichia coli to synthesize active formate dehydrogenase H, a selenoenzyme. This illustrates the ease by which the genetic code may evolve new coding schemes, possibly aiding organisms to adapt to changing environments. Lastly, our results reveal that the genetic code is much more flexible than previously thought.

59 BASIC BIOLOGICAL SCIENCES↗

Atomic-scale determination of active facets on the MoVTeNb oxide M1 phase and their intrinsic catalytic activity for ethane oxidative dehydrogenation

Atomic resolution aberration-corrected HAADF-STEM imaging has been used to directly image the basal (001) plane of the catalytically relevant M1 phase in MoVTeNb complex oxides. Facets {010}, {120} and {210} are identified as the most stable lateral terminations of the crystals. For each of these surface facets the average concentration of active sites is determined directly from the images. The most stable {010} facet does not expose active sites and is therefore regarded to be inactive. As a consequence, large flattened M1 particles are concluded to have a lower activity than other morphologies. This hypothesis is validated by a statistical analysis of two samples with rod vs. plate morphology. The concentration of sites and the catalytic activity in ethane oxidative dehydrogenation correlate perfectly, demonstrating quantitatively that the differences in reactivity between MoVTeNbOx catalysts of equal crystallinity and chemical composition depend primarily on the terminating facets that constitute the elongated catalyst particles.

MoVTeNbO, Oxidative Dehydrogenation, M1 phase, STE↗