SEARCH · Engineering Papers

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Tuning the magnetic properties of the CrMnFeCoNi Cantor alloy

Magnetic properties of more than 20 Cantor alloy samples of varying composition were investigated over a temperature range of 5 K to 300 K and in fields of up to 70 kOe using magnetometry and muon spin relaxation. Two transitions are identified: a spin-glass-like transition that appears between 55K and 190K, depending on composition, and a ferrimagnetic transition that occurs at approximately 43K in multiple samples with widely varying compositions. The magnetic signatures at 43K are remarkably insensitive to chemical composition. A modified Curie-Weiss model was used to fit the susceptibility data and to extract the net effective magnetic moment for each sample. The resulting values for the net effective moment were either diminished with increasing Cr or Mn concentrations or enhanced with decreasing Fe, Co, or Ni concentrations. Beyond a sufficiently large effective moment, the magnetic ground state transitions from ferrimagnetism to ferromagnetism. The effective magnetic moments, together with the corresponding compositions, are used in a global linear regression analysis to extract element-specific effective magnetic moments, which are compared to the values obtained by ab initio based density functional theory calculations. Finally, these moments provide the information necessary to controllably tune the magnetic properties of Cantor alloy variants.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Dielectron production in proton-proton and proton-lead collisions at $\sqrt{s_{NN}}$=5.02TeV

The first measurements of dielectron production at midrapidity (|η e | < 0.8) in proton–proton and proton–lead collisions at $\sqrt{s_{NN}}$ = 5.02 TeV at the LHC are presented. The dielectron cross section is measured with the ALICE detector as a function of the invariant mass m ee and the pair transverse momentum p T,ee in the ranges mee < 3.5 GeV/c 2 and p T,ee < 8 GeV/c, in both collision systems. In proton–proton collisions, the charm and beauty cross sections are determined at midrapidity from a fit to the data with two different event generators. This complements the existing dielectron measurements performed at $\sqrt{s}$ = 7 and 13 TeV. The slope of the $\sqrt{s}$ dependence of the three measurements is described by FONLL calculations. The dielectron cross section measured in proton–lead collisions is in agreement, within the current precision, with the expected dielectron production without any nuclear matter effects for e + e - pairs from open heavy-flavor hadron decays. For the first time at LHC energies, the dielectron production in proton–lead and proton–proton collisions are directly compared at the same $\sqrt{s_{NN}}$ via the dielectron nuclear modification factor R pPb . The measurements are compared to model calculations including cold nuclear matter effects, or additional sources of dielectrons from thermal radiation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Partial muon capture rates in A = 3 and A = 6 nuclei with chiral effective field theory

Searches for neutrinoless-double beta decay rates are crucial in addressing questions within fundamental symmetries and neutrino physics. The rates of these decays depend not only on unknown parameters associated with neutrinos, but also on nuclear properties. In order to reliably extract information about the neutrino, one needs an accurate treatment of the complex many-body dynamics of the nucleus. Neutrinoless-double beta decays take place at momentum transfers on the order of 100 MeV/$c$ and require both nuclear electroweak vector and axial current matrix elements. Muon capture, a process in the same momentum transfer regime, has readily available experimental data to validate these currents. In this work, we present results of {\it ab initio} calculations of partial muon capture rates for $^3$He and $^6$Li nuclei using variational and Green's Function Monte Carlo computational methods. We estimate the impact of the three-nucleon interactions, the cutoffs used to regularize two-nucleon ($2N$) interactions, and the energy range of $2N$ scattering data used to fit these interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Microphysics of early dark energy

Early dark energy (EDE) relies on scalar field dynamics to resolve the Hubble tension, by boosting the pre-recombination length scales and thereby raising the CMB-inferred value of the Hubble constant into agreement with late universe probes. However, the collateral effect of scalar field microphysics on the linear perturbation spectra appears to preclude a fully satisfactory solution. H 0 is not raised without the inclusion of a late universe prior, and the “S 8 -tension”, a discrepancy between early- and late-universe measurements of the structure growth parameter, is exacerbated. What if EDE is not a scalar field? Here, we investigate whether different microphysics, encoded in the constitutive relationships between pressure and energy density fluctuations, can relieve these tensions. We show that EDE with an anisotropic sound speed can soften both the H 0 and S 8 tensions while still providing a quality fit to CMB data. Future observations from the CMB-S4 experiment may be able to distinguish the underlying microphysics at the 4σ level, and thereby test whether a scalar field or some richer physics is at work.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Defect Structure in Quantum-Cutting Yb3+-Doped CsPbCl3 Perovskites Probed by X-Ray Absorption and Atomic Pair Distribution Function Analysis

Ytterbium-doping in all-inorganic lead-halide perovskites (CsPb(Cl1-xBrx)3) generates novel properties including quantum cutting and narrow line emission, making these materials attractive spectral down-converters for solar photovoltaics. The relationship between this optical efficiency and the defect structure(s) associated with Yb3+ dopants within perovskites is not well understood. Various charge-neutral doping motifs have previously been proposed and studied computationally, including clusters involving two substitutional Yb3+ ions charge-compensated by a single local Pb2+ vacancy. Near-band-edge defect states associated with such motifs are believed to play an important mechanistic role in quantum cutting itself. Here, we report the results of X-ray absorption and X-ray total-scattering measurements on ytterbium-doped CsPbCl3. XANES shows that the dopant oxidation state is exclusively Yb3+, and a combination of Yb L3 and Pb L3 EXAFS shows that this Yb3+ substitutes exclusively at Pb2+ sites, where it adopts a pseudo-octahedral [YbCl6]3- coordination environment. Shell-by-shell fits to the data show a short Yb-Cl bond distance of 2.58 Å compared to the Pb-Cl bond distance of 2.83 Å. We confirm this finding by X-ray pair distribution function analysis, which also shows evidence of additional Pb2+ vacancy formation induced by Yb3+ doping. We evaluate whether this is the primary mechanism of charge compensation using simulated EXAFS and pair distribution function data for several computed defect structures. Together, these results resolve the local dopant structures and charge-compensation mechanisms in lanthanide-doped all-inorganic lead-halide perovskites, and, as such, significantly advance the understanding of structure-function relationships in this important class of materials.

Kluherz, Kyle (ORCID:0000000279865167)↗

DOE OSTI2022

diffpy.mpdf : open-source software for magnetic pair distribution function analysis

The open-source Python package diffpy.mpdf , part of the DiffPy suite for diffraction and pair distribution function analysis, provides a user-friendly approach for performing magnetic pair distribution function (mPDF) analysis. The package builds on existing libraries in the DiffPy suite to allow users to create models of magnetic structures and calculate corresponding one- and three-dimensional mPDF patterns. diffpy.mpdf can be used to perform fits to mPDF data either in isolation or in combination with atomic pair distribution function data for joint refinement of the atomic and magnetic structure. Examples are given using MnO and MnTe as representative antiferromagnetic compounds and MnSb as a representative ferromagnet.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Aging Mechanisms of Broad Area ~800 nm Laser Diodes

Here, this work presents a comprehensive study of early aging behavior (<500 hr) in ~800 nm, phosphide-based laser diodes grown by solid-source MBE with different oxygen concentration levels incorporated into the diode epitaxial layers during growth. The data indicate that lasing characteristics prior to aging are degraded by oxygen introduction, but the gradual power degradation rate after the onset of aging is not a strong function of oxygen at these concentration levels. Devices with oxygen concentrations of ~2.5 × 10 15 cm -3 showed significantly longer delay before the onset of aging (incubation time) than devices with less than 1 × 10 15 cm -3 oxygen. Generation-Recombination current and Laser Beam Induced Current measurements indicate that defect densities and aggregation are suppressed at the facets by oxygen, which can explain longer incubation times. Diagnostic data and parametric fits to diode simulation models show that increased cavity optical loss and defect density are primarily responsible for gradual power degradation during aging, rather than changes in nonradiative recombination. Mechanisms are proposed that explain this behavior, based on density functional theory (DFT) simulations and known recombination-enhanced defect generation phenomena.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

On Feature, Classifier and Detector Fusers for 235U Signatures Using Gamma Spectral Counts

Three types of information fusion strategies are studied to assess the performance of classifiers for detecting low-level 235 U radiation sources, using features obtained from gamma spectra of NaI detectors. These three strategies are based on using two spectral region features, fusing eight classifiers of diverse designs, and fusing multiple detectors located at different positions around the source. The inner, middle and outer groups of detectors, within a formation of two concentric circles and a spiral of 21 detectors, are identified based on their distance to the source, which is located at the center. This study provides two main qualitative insights into this classification task. First, the fusion of detectors leads to an overall improved classification performance, least in the inner group, most in the outer group, and in between for the middle group. Second, several classifiers and fusers achieve lower training error which does not translate to lower generalization error, indicating their over-fitting to training data.

Rao, Nageswara↗

DOE OSTI2023

Intra-Grain Local Luminescence Properties of CdSe0.1Te0.9 Thin Films

We report on the local photoluminescence properties of grains and grain boundaries of CdSe 0.1 Te 0.9 thin film deposited by the colossal grain growth method using a wide-field hyperspectral imaging technique. We observed significant variations in the photoluminescence intensity of both individual grains and also that of grain boundaries. Multiple sub-bandgap defect peaks were captured in the luminescence spectra in the energy range 1.2 eV to 1.6 eV. The intensity and peak positions of these sub-gap emissions were slightly different among various grains and at the grain boundaries, revealing intra- and inter-grain variations in these polycrystalline thin films. A recently-developed density-of-states based photoluminescence model was extended to include multiple peaks and was fitted to the data. We observed that at a fixed temperature, the quasi-Fermi level splitting energy and a disordered energy parameter can be extracted locally by use of this model.

data models↗

DOE OSTI2024

A Comprehensive Model for Analyzing the Effects of Power Outages on Customers

Power outages can cause significant inconveniences to critical services and substantial economic losses. Therefore, it is crucial to systematically analyze the impact on customers during power outages caused by various factors, such as severe thunderstorms, floods, vegetation, or mechanical problems, and to plan for reliable operation and control under such events. Power outages in different locations may exhibit varying characteristics regarding customer impact. In this paper, we present a mathematical model that captures the essential characteristics of customer impact during power outages. The parameters of our model include impact duration, recovery duration, maximum impact level, increase curve parameter, and decrease curve parameter. We demonstrate how historical power outage data can be fitted to our model, enabling a systematic comparison of outages caused by different factors in various locations.

Lee, Sangkeun (Matt) [ORNL] (ORCID:000000021317511↗

DOE OSTI2023

Glass formulation and composition optimization with property models: A review

Abstract Glass is a versatile material with a remarkable history and many practical applications. It plays a critical role in our everyday lives, the advancement of science, and the development of many technologies. The Edisonian type trial‐and‐error method was commonly used for conventional design of glass compositions, which was time‐consuming and costly. With the urgent need to develop new glass compositions for technology applications rapidly, it has become necessary to develop precise property models with predictive powers using large databases and efficient formulation approaches. This paper reviews the design of glass compositions using these analytical and numerical models of composition–structure–property relations of glasses, some based on large databases and machine learning approaches. Aspects of data collection, model fitting, feature extraction, model evaluation, and uncertainty quantification will be covered. Furthermore, advances in the glass optimization framework and available tools are summarized with examples. The outlook and perspective for further glass property model development and formulation approaches are discussed.

Lu, Xiaonan↗

DOE OSTI2025

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗

DOE OSTI2020

Activities and risk factors associated with fall-related injuries among US Army soldiers

Introduction Falls/near falls are the second leading cause of hospitalisation and outpatient visits among US Army soldiers. While numerous studies have evaluated fall-related or near fall-related injuries among elderly adults, few have evaluated this association among young adults. The objective of this study is to describe the characteristics and risk factors associated with fall-related or near fall-related injuries among male US Army soldiers. Methods This is a cross-sectional study of male US Army Airborne Division soldiers (n=5187). Electronic surveys captured demographic, lifestyle, physical training (PT), fitness and injury data during spring/summer of 2016. Multiple logistic regression was used to identify independent risk factors of fall-related or near fall-related injuries, adjusting for potential confounders. Results Primary findings indicated that activities and risk factors associated with fall-related or near fall-related injuries among soldiers included younger age (≤35 years), holding a job that required minimal lifting activities, slower 2-mile run times and not running during personal PT. Conclusions The findings from this study suggest that male US Army soldiers and other physically active men may benefit from (1) obtaining and/or maintaining higher aerobic endurance and muscular strength, and (2) training focused on preventing fall-related injuries during PT, road marching and sports/recreational activities. Moreover, prevention strategies and education should further target younger soldiers (≤35 years old), as younger age is not modifiable.

General & Internal Medicine↗

DOE OSTI2020

Design Principles to Govern Electrode Fabrication for the Lithium Trivanadate Cathode

A full depth of discharge mathematical model for the lithium trivanadate cathode, considering lithiation of the layered α-phase, phase change, and lithiation of the rock-salt like β-phase at lower potentials, is developed. The coupled electrode-scale and crystal-scale model is fit to electrochemical data, and additionally validated with operando EDXRD. There is good agreement between the simulated and measured spatial variation of the volume fraction of the β-phase. This mathematical model is used to guide electrode fabrication, accounting for both ionic and electronic transport effects. Values of three design parameters—electrode thickness, porosity, and volume fraction of conductor—are identified, and the sensitivity of the energy density to these design parameters is quantified. The model is also used to investigate electrode design to create electrodes that deliver the maximum achievable energy density under the constraint that the α to β-phase transition is avoided, since phase change has been demonstrated to reduce cycle life. The energy density sacrificed to avoid phase change decreases at higher discharge rates, but the target values for electrode fabrication remain the same as those when optimizing the electrode for the full depth of discharge.

25 ENERGY STORAGE↗

DOE OSTI2024

Physics-Based Continuum Modeling for an Aqueous Rechargeable Zn/MnO 2 Battery

This study introduces a framework for modeling the aqueous Zn/MnO 2 rechargeable battery. A reaction system and a physics-based continuum model are proposed based on two reaction types, one involving insertion and the second related to dissolution and deposition of a solid reaction product. The model, fitted to empirical data, predicts voltage behavior and capacity limitations during cycling, identifying electrolytic zinc depletion as a limiting mechanism, depending on the original cell construction. The research suggests the need for further material characterization and reaction analysis, which will advance our understanding and facilitate the development of grid-scale energy storage solutions.

Electrochemistry↗

DOE OSTI2024

HydraGNN v3.0

New or improved capabilities included in v3.0 release are as follows: 1. Enhancement in message passing layers through generalization of the class inheritance to enable the inclusion of a broader set of message passing policies Inclusion of equivariant message passing layers from the original implementations of: SchNet (https://pubs.aip.org/aip/jcp/article/148/24/241722/962591/SchNet-A-deep-learning-architecture-for-molecules); DimeNet++ (https://arxiv.org/abs/2011.14115); EGNN models (https://arxiv.org/pdf/2102.09844.pdf) 2. Restructuring of class inheritance for data management 3. Support of DDStore https://github.com/ORNL/DDStore capabilities for improved distributed data parallelism on large volumes of data that cannot fit on intra-node memory capacities 4. Large-scale system support for OLCF-Crusher and OLCF-Frontier

Lupo Pasini, Massimiliano [Oak Ridge National Labo↗

DOE OSTI2025

COBRA:COMPUTED-TOMOGRAPHY BASED RANDOM-FIELD APPROXIMATION

SF-25-115 COBRA (COmputed-tomography Based Random-field Approximation) is a Python application for generating statistically equivalent random fields from CT-scan imagery. It leverages Karhunen–Loève expansions to model microstructural variability, enabling users to: Preprocess CT scans (filtering and Gaussian transformation); Fit covariance kernels fromempirical data; Solve eigenproblems to obtain KL modes; Sample random fields onsistent with fitted statistics; Postprocess samples back into the physical domain.

Hu, Tianchen↗

DOE OSTI2025

Kinetic Deep Learning v0.1

Here, we present a method that uses protein levels to predict times series of metabolite concentrations. Understanding this type of pathway dynamics is important in order to predict the behavior of the pathway and, more pragmatically, to be able to design biological systems (such as strains bioengineered to produce chemical products) reliably. Typically, for this purpose, kinetic models consisting of differential equations based on the Michaelis-Menten dynamics have been used in the past. However, these methods can rarely produce good fits to measured data time series. Possibly, this happens because the kinetic constants are unknown or are different from the ones measured in vivo, or perhaps because Michaelis-Menten dynamics is not a satisfactory description. In order to improve the predictive nature of these kinetic models we have eliminated the Michaelis-Menten description of pathway dynamics and we have substituted it by algorithms that automatically learn these dynamics from previously obtained metabolomics and proteomics data using machine learning approaches. Specifically, kinetic deep learning uses deep learning to map proteomics time series to metabolite concentration time series, instead of learning the first metabolite derivative and integrating in (as in the first version of kinetic learning). This approach is shown to provide good to excellent results with a data set specifically collected for this purpose.

Garcia Martin, Hector [Joint BioEnergy Institute (↗