Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

A subsized fatigue specimen

A subsized fatigue specimen has been designed to overcome the difficulty of machining a full-sized specimen from cast superalloy components. A finite element analysis confirmed that the stress was maximum at the gauge section for any given set of clamping and tensile loads, and that the stresses developed due to clamping forces were negligible compared with those due to tensile or compressive loads. Fatigue data generated using subsized specimens of AISI 4130 steel, 2024-T4 aluminum alloy and 6Al-4V titanium alloy compared well with those available in the literature for full-sized specimens.

Jeelani, S.↗

Enhancements of energetic ions associated with travelling compression regions in the deep geomagnetic tail

This paper presents a representative example of an enhancement in energetic ion flux associated with the International Sun-Earth Explorer 3 (ISEE 3) spacecraft's encounter with a traveling compression region (TCR). Data from the energetic particle anisotropy spectrometer (EPAS) instrument on ISEE 3 are studied, along with magnetic field data from the vector helium magnetometer. It is concluded that the ion enhancements seen are spatial in nature, thus supporting the idea that TCRs are the lobe signatures of plasmoids moving along the magnetotail, away from earth.

Murphy, N.↗

The UCR gamma ray telescope data acquisition system

A description is given of an electronics system based on the DEC Falcon SBC-11/23+, which has been designed and built to support a balloon-borne double Compton gamma-ray telescope. The system provides support for commands, data acquisition, data routing and compression, and photomultiplier tube gain control. The software consists of a number of interrupt-driven routines of differing priorities to handle each system task. This includes two circular buffers for onboard processing and bit encoding before transmission of the information to the ground computer. Acquisition of gamma-ray events at rates above the 200-Hz telemetry constraint is easily achieved.

O'Neill, T. J.↗

Development of the SAMEX vector magnetograph at the Marshall Space Flight Center

A breadboard design to prove the operational feasibility of SAMEX Vector Magnetograph is being developed. Although the breadboard design will not include all of the elements of the original design concept, critical elements such as the large detector array and the high resolution polarimeter will be important parts of the breadboard design to study the data analysis and compression techniques that will be needed in a SAMEX instrument, to study the calibration techniques for systemmatic errors in the polarimeter, and to obtain high resolution vector magnetograms during the next solar maximum. Although the SAMEX polarimeter is not optimum for a ground-based patrol instrument, the design concept can be confirmed with ground-based measurements and direct comparisons with the existing vector magnetograph. The extension of the scientific objectives for this breadboard design is possible if a tunable filter can be acquired.

West, E. A.↗

A self diagnostic system for piezoelectric sensors

A technique for determining the mounting conditions of a piezoelectric accelerometer is presented. This technique electrically stimulates the piezoelectric element in the 'diagnostic' frequency band measuring the electrical frequency response characteristics across a capacitive load impedance. The diagnostic frequency band is tipically much higher than the operating bandwidth of the accelerometer. The resonant frequencies of the accelerometer are included in the diagnostic band. By monitoring the shift in these resonant frequencies, via electrical stimulation techniques, certain diagnostic conditions including mounting conditions can be determined. Experimental data from a compression mode accelerometer is used to demonstrate this technique.

Atherton, William J.↗

The Voyager 2 mission to Neptune

Voyager 2 and its twin, Voyager 1, were launched in 1977. Both spacecraft investigated Jupiter's and Saturn's systems. Voyager 2 continued on to fly past Utranus in 1986 and Neptune in 1989, while Voyager 1 headed out of the solar system. The mission at Neptune presented many engineering and scientific challenges. Neptune is about 30 Astronomical Units (AU) from the sun and earth, resulting in extremely low lights levels (nearly 1000 times lower than at earth) and in communication distances of nearly 4.5 billion kilometers. To compensate for the long communication distances, several new techniques were developed. As at Uranus, an onboard backup computer compressed the imaging data. In addition, the data return was further improved by electronically arraying and expanding several receiving antennas. As a result, the data rates from Neptune were about the same as they were from Saturn, even though the distance was three times greater. Several changes were made in the onboard software to optimize Voyager's operations at the very low light levels at Neptune. Finally, to obtain the maximum information from the Neptune encounter, a trajectory was selected which passed within just 5000 kilometers of Neptune's atmosphere, but which also posed several possible environmental hazards.

Haynes, Norman R.↗

Coding gains and error rates from the Big Viterbi Decoder

A prototype hardware Big Viterbi Decoder (BVD) was completed for an experiment with the Galileo Spacecraft. Searches for new convolutional codes, studies of Viterbi decoder hardware designs and architectures, mathematical formulations, and decompositions of the deBruijn graph into identical and hierarchical subgraphs, and very large scale integration (VLSI) chip design are just a few examples of tasks completed for this project. The BVD bit error rates (BER), measured from hardware and software simulations, are plotted as a function of bit signal to noise ratio E sub b/N sub 0 on the additive white Gaussian noise channel. Using the constraint length 15, rate 1/4, experimental convolutional code for the Galileo mission, the BVD gains 1.5 dB over the NASA standard (7,1/2) Maximum Likelihood Convolution Decoder (MCD) at a BER of 0.005. At this BER, the same gain results when the (255,233) NASA standard Reed-Solomon decoder is used, which yields a word error rate of 2.1 x 10(exp -8) and a BER of 1.4 x 10(exp -9). The (15, 1/6) code to be used by the Cometary Rendezvous Asteroid Flyby (CRAF)/Cassini Missions yields 1.7 dB of coding gain. These gains are measured with respect to symbols input to the BVD and increase with decreasing BER. Also, 8-bit input symbol quantization makes the BVD resistant to demodulated signal-level variations which may cause higher bandwidth than the NASA (7,1/2) code, these gains are offset by about 0.1 dB of expected additional receiver losses. Coding gains of several decibels are possible by compressing all spacecraft data.

Onyszchuk, I. M.↗

High rate science data handling on Space Station Freedom

A study by NASA's User Information System Working Group for Space Station Freedom (SSF) has determined that the proposed onboard Data Management System, as initially configured, will be incapable of handling the data-generation rates typical of numerous scientific sensor payloads; many of these generate data at rates in excess of 10 Mbps, and there are at least four cases of rates in excess of 300 Mbps. The SSF Working Group has accordingly suggested an alternative conceptual architecture based on technology expected to achieve space-qualified status by 1995. The architecture encompasses recorders with rapid data-ingest capabilities and massive storage capabilities, optical delay lines allowing the recording of only the phenomena of interest, and data flow-compressing image processors.

Handley, Thomas H., Jr.↗

The influence of platform attitude dynamics on the Doppler frequency synthesis of SIR-B ocean data near Hurricane Josephine

The Space Shuttle Challenger was maneuvered into an SAR data-acquisition mode to capture a SIR-B scene of Hurricane Josephine, which presented itself as an unscheduled target of opportunity during NASA Mission 41-G during October 1984. Steeply sloped seas approaching 10 m in height were observed several hundred km in advance of the hurricane track. Mission attitude data indicate that the Shuttle pitch, roll, and yaw were unstable during the data take. The statistical clutterlock used by the ground SAR processor yields a Doppler frequency estimate that tracks the Shuttle yaw variation but is ambiguous with a single discontinuity equal to one multiple of the radar pulse repetition frequency. The SIR-B signal data have been compressed under several Doppler parameterizations to investigate the ambiguity of the clutterlock. Resultant ocean images are analyzed for their contrast and resolution properties.

Tilley, David G.↗

Adaptive Vector-Quantization Scheme

Adaptive vector-quantization scheme provides for rapid encoding of signals for transmission in compressed form and for rapid decoding at receiver. Based on simple heuristic "move-to-front" protocol effecting lossless compression of high-rate textual data. Audio, video, or other signals compressed efficiently.

Cheung, Kar-Ming↗

Comments on the present state and future directions of PDF methods

The one point probability density function (PDF) method is examined in light of its use in actual engineering problems. The PDF method, although relatively complicated, appears to be the only format available to handle the nonlinear stochastic difficulties caused by typical reaction kinetics. Turbulence modeling, if it is to play a central role in combustion modeling, has to be integrated with the chemistry in a way which produces accurate numerical solutions to combustion problems. It is questionable whether the development of turbulent models in isolation from the peculiar statistics of reactant concentrations is a fruitful line of development as far as propulsion is concerned. There are three issues for which additional viewgraphs are prepared: the one point pdf method; the amplitude mapping closure; and a hybrid strategy for replacing a full two point pdf treatment of reacting flows by a single point pdf and correlation functions. An appeal is made for the establishment of an adequate data base for compressible flow with reactions for Mach numbers of unity or higher.

Obrien, E. E.↗

Development of stitching reinforcement for transport wing panels

The NASA Advanced Composites Technology (ACT) program has the objective of providing the technology required to obtain the full benefit of weight savings and performance improvements offered by composite primary aircraft structures. Achieving the objective is dependent upon developing composite materials and structures which are damage tolerant and economical to manufacture. Researchers are investigating stitching reinforcement combined with resin transfer molding to produce materials meeting the ACT program objective. Research is aimed at materials, processes, and structural concepts for application in both transport wings and fuselages, but the emphasis to date has been on wing panels. Empirical guidelines are being established for stitching reinforcement in structures designed for heavy loads. Results are presented from evaluation tests investigating stitching types, threads, and density (penetrations per square inch). Tension strength, compression strength, and compression after impact data are reported.

Palmer, Raymond J.↗

Subband And Transform Compression Of Video Signals

Class of hierarchical subband coders developed primarily for compression of image data at video rates. Coders offer good performance with limited computational complexity and with flexibility inherent in subband decomposition.

Sauer, Ken↗

Subband And Transform Compression Of Video Signals

Class of hierarchical subband coders developed primarily for compression of image data at video rates. Offers good performance with limited computational complexity and with flexibility inherent in subband decomposition. Particular subband decomposition chosen for coders appears to hide large quantitative errors effectively, largely because decomposition occurs along two-dimensional spatial-frequency-domain boundaries resembling spatial-frequency-domain curves of constant sensitivity of human visual system. Curves found approximately diamond-shaped: thus, low-pass filtering for reduction of data ideally involves nonrectangular passbands.

Sauer, Ken↗

Develop advanced nonlinear signal analysis topographical mapping system

This study will provide timely assessment of SSME component operational status, identify probable causes of malfunction, and indicate feasible engineering solutions. The final result of this program will yield an advanced nonlinear signal analysis topographical mapping system (ATMS) of nonlinear and nonstationary spectral analysis software package integrated with the Compressed SSME TOPO Data Base (CSTDB) on the same platform. This system will allow NASA engineers to retrieve any unique defect signatures and trends associated with different failure modes and anomalous phenomena over the entire SSME test history across turbopump families.

Jong, Jen-Yi↗

Effects of temperature and humidity cycling on the strengths of textile reinforced carbon/epoxy composite materials

Results are presented from an experimental evaluation of the combined effects of temperature and humidity cycling on AS4/3501-6 composites (unstitched, Kevlar 29 stitched, and S-2 glass stitched uniweave fabric) and AS4/E905L composites (2-D, S-2 glass stitched 2-D, and 3-D braided fabric). The AS4/3501-6 uniweave material had a quasi-isotropic layup, whereas the AS4/E905L materials were braided in a (+/-30 deg/0 deg)(sub s) orientation. Data presented include compression strengths and compression-compression fatigue results for uncycled composites and cycled composites (160, 480, 720, and 1280 cycles from 140 deg F at 95 percent relative humidity to -67 deg F). To observe the presence of microcracking within the laminates, photomicrographs were taken of each material type at the end of each cycling period. Microcracks were found to be more prevalent within stitched laminates, predominantly around individual stitches. The glass stitched laminates showed significant microcracking even before cycling. Less microcracking was evident in the Kevlar stitched materials, whereas the unstitched uniweave material developed microcracks only after cycling. The 3-D braid did not develop microcracks. The static compression strengths of the unstitched and Kevlar stitched uniweave materials were degraded by about 10 percent after 1280 temperature/humidity cycles, whereas the reduction in compression strength for the glass stitched uniweave was less than 3 percent. The reduction in compression strength for the glass stitched 2-D braid was less than 8 percent. The unstitched 2-D and 3-D braids did not lose strength from temperature/humidity cycling. The compression-compression fatigue properties of all six material types were not affected by temperature/humidity cycling.

Cano, Roberto J.↗

Enhancing Images By Nonlinear Extrapolation In Frequency

Improved method of enchancing edges in image involves nonlinear filter operation creating image-intensity components having spatial frequencies higher than those present in input image and locked in phase to lower-frequency input components. In comparison with other edge-enhancement methods involving mostly strengthening of higher-frequency components already present in input, this method computationally simpler and yields better results. Better suited to real-time applications like high-definition television and compression of image data.

Anderson, Charles H.↗

VLSI Processor For Vector Quantization

Pixel intensities in each kernel compared simultaneously with all code vectors. Prototype high-performance, low-power, very-large-scale integrated (VLSI) circuit designed to perform compression of image data by vector-quantization method. Contains relatively simple analog computational cells operating on direct or buffered outputs of photodetectors grouped into blocks in imaging array, yielding vector-quantization code word for each such block in sequence. Scheme exploits parallel-processing nature of vector-quantization architecture, with consequent increase in speed.

Tawel, Raoul↗