Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Comparison of experimental and theoretical drag characteristics for a 10-percent-thick supercritical airfoil using a new version of an analysis code

Comparisons of experimental and theoretical drag characteristics for a 10-percent-thick supercritical airfoil using a new version of an advanced analysis code. Comparisons are made at near-design normal-force coefficients for Reynolds numbers from 2 to 11 million. Comments are made concerning various input parameters to the code.

Harris, C. D.↗

Numerical studies of laminar and turbulent drag reduction, part 2

The flow over wave shaped surfaces is studied using a Navier Stokes solver. Detailed comparisons with theoretical results are presented, including the stability of a laminar flow over wavy surfaces. Drag characteristics of nonplanar surfaces are predicted using the Navier-Stokes solver. The secondary instabilities of wall bounded and free shear flows are also discussed.

Balasubramanian, R.↗

Attitude control and drag compensation propulsion system for Gravity Probe-B spacecraft

An on board propulsion system for attitude control and drag compensation is presented which uses helium boiloff gas from an experiment package dewar as propellant. This boiloff gas would normally be vented nonpropulsively. Use of a small allowable temperature range in the dewar is exploited to store helium and accommodate incompatibilities in dewar heat leak and thruster demand flow over periods of more than one orbit. A relatively detailed thermodynamics analysis of the two phase helium dewar and simulation of pressure loss through the helium distribution system is included.

Blount, D. H.↗

Numerical optimization techniques for bound circulation distribution for minimum induced drag of Nonplanar wings: Computer program documentation

A two dimensional advanced panel far-field potential flow model of the undistorted, interacting wakes of multiple lifting surfaces was developed which allows the determination of the spanwise bound circulation distribution required for minimum induced drag. This model was implemented in a FORTRAN computer program, the use of which is documented in this report. The nonplanar wakes are broken up into variable sized, flat panels, as chosen by the user. The wake vortex sheet strength is assumed to vary linearly over each of these panels, resulting in a quadratic variation of bound circulation. Panels are infinite in the streamwise direction. The theory is briefly summarized herein; sample results are given for multiple, nonplanar, lifting surfaces, and the use of the computer program is detailed in the appendixes.

Kuhlman, J. M.↗

An experimental study of transonic flow about a supercritical airfoil. Static pressure and drag data obtained from tests of a supercritical airfoil and an NACA 0012 airfoil at transonic speeds, supplement

Surface static-pressure and drag data obtained from tests of two slightly modified versions of the original NASA Whitcomb airfoil and a model of the NACA 0012 airfoil section are presented. Data for the supercritical airfoil were obtained for a free-stream Mach number range of 0.5 to 0.9, and a chord Reynolds number range of 2 x 10 to the 6th power to 4 x 10 to the 6th power. The NACA 0012 airfoil was tested at a constant chord Reynolds number of 2 x 10 to the 6th power and a free-stream Mach number range of 0.6 to 0.8.

Spaid, F. W.↗

Ion wind drag reduction

In order to study the effect of ion wind on viscous drag, the equations of electrogasdynamics are solved numerically assuming the flow is incompressible, the electric field is steady and that the fluid velocity is negligible compared to ion drift velocity. The results obtained to date in a continuing theoretical and experimental research program are presented.

Malik, M. R.↗

Satellite drag prediction effects on Shuttle mission planning

Long-term factors, along with Shuttle performance limitations, are considered in order to illustrate the need for more reliable long-term drag (meaning 'solar cycle') prediction techniques. Such techniques would make it possible to confidently plan dual-objective Shuttle flights, which maximize Shuttle cargo loadings and thus reduce costs. In describing the coupled mission concept, it is pointed out that by deploying one payload while retrieving or servicing another, the Space Transportation System can maximize the usefulness of the Shuttle and reduce the cost per customer. It is shown here that the proposed mission coupling LDEF (Long Duration Exposure Facility) with ST (Space Telescope) must be rejected since the Shuttle performance limitations prohibit deployment of the ST at even 315 n mi with a subsequent LDEF retrieval. If, however, it were possible to predict solar cycles, then, depending on the prediction, a mission of this type could be feasible.

Young, K. A.↗

Optimization and closed loop guidance of drag modulated aeroassisted orbital transfer

An analysis of optimal and near optimal atmospheric flight trajectories for drag modulated aeroassisted orbital transfer is presented. An explicit and adaptive closed loop guidance approach for this mode of orbit transfer is also presented with performance near the optimal nominal trajectories. The orbital transfer of interest is for return from high earth orbit to low earth orbit. Most of what is discussed in this paper concerns the aeroassisted or atmospheric segment which lowers the apogee of the high earth orbit to the apogee of the low earth orbit. Minimization of the total impulsive delta-V at this low earth orbit apogee is the optimization criterion. Control about this impulse due to a number of potential error sources in atmospheric braking is the requirement imposed on closed loop guidance.

Kechichian, J. A.↗

Over-the-Wing Propeller Reduces Wing Drag

Airflow favorably altered if propeller placed above and behind wing. Relocating propeller induces flow over wing airfoil leading edge, which produces leading-edge suction forces not usually attainable by wing in free-stream flow. Concept reduced drag significantly on aircraft model in 12-foot (3.7-meter) wind tunnel. Relocation also helps to reduce cabin noise.

Johnson, J. L., Jr.↗

The drag of magnetically suspended wind-tunnel models with nose-cones of various shapes

This article concerns the experimental determination of optimum nose-cones (minimum drag) of a body of revolution at supersonic and hypersonic speeds by means of ONERA magnetic suspension. The study concerns two groups of models, specifically: a group whose nose-cone has a profile in the shape of X(n); the AGARD B group whose nose-cone is plotted in accordance with a given law. The results obtained for the first group are comparable to those calculated with the approximations of Cole and Newton and the experiments carried out by Kubota.

Dubois, G.↗

Determination of External Store Drag

The evaluation of external stores concerns single store configurations and double store configurations. The necessary considered further work for completing external store statistical basic data is listed. The external store drag is evaluated in a classical manner for all configurations and configuration components beginning with the clean aircraft as first reference configuration and than evaluating step by step additional components (e.g., gun-pod, pylons, tanks e.a.). The main effort is directed on underwing stores, as the ALPHA-Jet has only one under-fuselage station for a gun-pod.

K Lutz↗

A new method for flight test determination of propulsive efficiency and drag coefficient

A flight test method is described from which propulsive efficiency as well as parasite and induced drag coefficients can be directly determined using relatively simple instrumentation and analysis techniques. The method uses information contained in the transient response in airspeed for a small power change in level flight in addition to the usual measurement of power required for level flight. Measurements of pitch angle and longitudinal and normal acceleration are eliminated. The theoretical basis for the method, the analytical techniques used, and the results of application of the method to flight test data are presented.

Bull, G.↗

Embedded shear layer computations for increased drag reduction

One of the most promising methods of minimizing drag is the reduction of skin friction by injection of low momentum fluid into the near-wall region of turbulent boundary layer flows. This method could be made more effective by limiting the spread rate of the resulting mixing region. In order to achieve a better understanding of how this goal might be achieved, numerical investigations of the relevant fluid dynamic processes governing these regions have been conducted. A compact finite-difference algorithm has been applied to the complete form of the governing conservation equations for a two-dimensional laminar mixing layer. The ability of this computational approach to model successfully the formation and interaction of the large scale vortical structures which dominate such flow fields is verified in the present study. Parameters which affect the spread rate of the mixing region are also identified. In addition, the relative importance of viscous and momentum transport effects in the vortex interactions is determined.

Gatski, T. B.↗

Thermal response of an aeroassisted orbital-transfer vehicle with a conical drag brake

As an aeroassisted orbital-transfer vehicle (AOTV) goes through an aerobraking maneuver, a significant amount of heat is generated. In this paper, the thermal response of a specific AOTV to this aerobrake heating is examined. The vehicle has a 70 deg, conical drag-brake heat shield attached to a cylindrical body which contains the payload. The heat shield is made of silica fabric. The heat-shield thickness is varied from that of a thin cloth to a 1.5-cm blanket. The fabric thickness, the radiation absorptivity of the vehicle surface materials, and radiation from the wake are all significant parameters in the thermal response to the heating produced by the braking maneuver. The maximum temperatures occur in the vicinity of the interface between the body and the conical heat shield.

Pitts, W. C.↗

Numerical study of terrain-induced mesoscale motions and hydrostatic form drag in a heated, growing mixed layer

Han et al. (1982) have found in a previous numerical study of terrain-induced mesoscale motions that the orography caused a steady-state flow pattern to occur. The study was concerned with a simplified case in which no surface heating occurred. The present investigation considers an extension of this study to the more realistic case of a heated, growing daytime mixed layer containing horizontal variations of potential temperature as well as velocity. The model is also extended to include three layers above the mixed layer. It is found for a heated, growing mixed layer, that the mesoscale form drag is a thermal-anomaly or buoyancy effect associated with horizontal variations of potential temperature within the layer.

Deardorff, J. W.↗

Comparison of various drag coefficient expansions using polynomials and splines

The longitudinal differential equation of motion has been used to investigate various aerodynamic expansion techniques. The total drag coefficient was expanded using conventional polynomials and splines with and without floating knot locations. This paper discusses the various techniques and approaches, compares results obtained from simultaneously fitting four separate flights (time vs distance measurements) and outlines the potential advantages and/or disadvantages of the various aerodynamic expansion techniques. It is believed that this is the first time splines have been used in the aerodynamic coefficient estimation process and that these results and techniques are germane to other applications.

Sabot, S. M.↗

Low lift-to-drag aero-assisted orbit transfer vehicles

The results of systems analysis conducted on low life drag ratio (L/D) aero-assisted orbit transfer vehicle (AOTV's) are presented. The objectives for this class of vehicle and formulate technology development plans and funding levels to bring the required technologies to readiness levels, as well as develop a credible decision data base encompassing the entire range of low L/D concepts for use in future NASA Aeroassist Orbit Transfer Vehicles studies. Each candidate low L/D concept, the aerobrake, the lifting brake, and the aeromaneuvering concept could be made to work with technologies achievable by the early 1990's. All concepts require flexible structure with flexible thermal protection system (TPS) to be successfully integrated into the shuttle orbiter for launch, all required improvements in guidance and control to fly the dispersed atmospheres at high altitude, and all concepts had potential to evolve from ground-based to space-based operations.

Andrews, D. G.↗

Moderate lift-to-drag aeroassist

Significant performance benefits are realized via aerodynamic braking and/or aerodynamic maneuvering on return from higher altitude orbits to low Earth orbit. This approach substantially reduces the mission propellant requirements by using the aerodynamic drag, D, to brake the vehicle to near circular velocity and the aerodynamic lift, L, to null out accumulated errors as well as change the orbital inclination to that required for rendezvous with the Space Shuttle Orbiter. Broad concept evaluations were performed and the technology requirements and sensitivities for aeroassisted OTV's over a range of vehicle hypersonic L/D from 0.75 to 1.5 were systematically identified and assessed. The aeroassisted OTV is capable of evolving from an initial delivery only system to one eventually capable of supporting manned roundtrip missions to geosynchronous orbit. Concept screening was conducted on numerous configurations spanning the L/D = 0.75 to 1.5 range, and several with attractive features were identified. Initial payload capability was evaluated for a baseline of delivery to GEO, six hour polar, and Molniya (12 hours x 63.4 deg) orbits with return and recovery of the aeroassist orbit transfer vehicle (AOTV) at LEO. Evolutionary payload requirements that were assessed include a GEO servicing mission (6K up and 2K return) and a manned GEO mission (14K roundtrip).

Florence, D. E.↗