SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In order to predict the performance of a synthetic aperture radar for a wide variety of system and environmental parameters a computer simulation of the SAR system was developed. This model is a detailed description of the SAR imaging process on a pulse-by-pulse basis. The simulation is implemented as seven computer programs for a CDC Cyber 171 digital computer.
Detailed computer resource measurements of the NASTRAN matrix decomposition spill logic were made using a software input/output monitor. These measurements showed that, in general, job cost can be reduced by avoiding spill. The results indicated that job cost can be minimized by using dynamic memory management. A prototype memory management system is being implemented and evaluated for the CDC Cyber computer.
A description is presented for a new explicit algorithm for solving the transonic small-disturbance potential equation on the STAR-100 computer. The STAR computer has a 'pipeline' type of processor which is very efficient in doing arithmetic operations on long vectors. Unfortunately, the successive line over-relaxation method, which represents the best method for solving the considered equation, is not suitable for vector-arithmetic procedures. The described algorithm, however, can be vectorized to make an employment of the STAR-100 possible. It is found that a use of the new algorithm for solving the equation on the STAR-100 computer can almost halve the computer time required for this type of computation when compared to successive line over-relaxation on the CYBER 175 computer.
An Interpretive Computer Simulator (ICS) for the NASA Standard Spacecraft Computer-II (NSSC-II) was developed as a code verification and testing tool for the Annular Suspension and Pointing System (ASPS) project. The simulator is written in the higher level language PASCAL and implented on the CDC CYBER series computer system. It is supported by a metal assembler, a linkage loader for the NSSC-II, and a utility library to meet the application requirements. The architectural design of the NSSC-II is that of an IBM System/360 (S/360) and supports all but four instructions of the S/360 standard instruction set. The structural design of the ICS is described with emphasis on the design differences between it and the NSSC-II hardware. The program flow is diagrammed, with the function of each procedure being defined; the instruction implementation is discussed in broad terms; and the instruction timings used in the ICS are listed. An example of the steps required to process an assembly level language program on the ICS is included. The example illustrates the control cards necessary to assemble, load, and execute assembly language code; the sample program to to be executed; the executable load module produced by the loader; and the resulting output produced by the ICS.
This paper discusses a number of algorithms for solving the transonic full-potential equation in conservative form on a vector computer, such as the CDC STAR-100 or the CRAY-1. Recent research with the 'artificial density' method for transonics has led to development of some new iteration schemes which take advantage of vector-computer architecture without suffering significant loss of convergence rate. Several of these more promising schemes are described and 2-D and 3-D results are shown comparing the computational rates on the STAR and CRAY vector computers, and the CYBER-175 serial computer. Schemes included are: (1) Checkerboard SOR, (2) Checkerboard Leapfrog, (3) odd-even vertical line SOR, and (4) odd-even horizontal line SOR.
Computer program integrates path of relativistic electron through region of nonuniform static electromagnetic fields with accuracy of 1 micrometer in 10 centimeters. Program can ue be used to evaluate and modify design of electron-imaging systems. Language is FORTRAN IV, for batch or interactive execution on PDP 10, 11, CYBER 70, 170, and CDC 6000.
Program considers combustion and diffusive effects in analysis of supersonic, combustion-flow fields with imbedded subsonic regions. Effects of finite-rate chemistry, mixing, and wave propagation are linked together. Program handles up to 20 simultaneous shock waves. Some chemistry terms are computed for seven-species, eight-mechanism, hydrogen-and-air reaction scheme. Program is aid for supersonic-combustor development studies and is written in FORTRAN IV for batch execution on CYBER 175.
Program is revised of NASA/Lockheed program to numerically analyze complex viscous flow about slotted airfoils. Airfoil to be analyzed can contain as many as 10 components with negative or positive overlap. Program is written in FORTRAN IV and Assembled for batch execution on CYBER 175 only.
Program provides analytic solutions to nonlinear equations of motion describing spin conditions. Stability characteristics also are determined. Program can be used to study effects of aerodynamic and inertial parameters on spin and could be modified to compute equilibrium conditions for steady maneuvers. Program is written in FORTRAN IV for batch execution on CYBER 173.
Program calculates viscous effects on lift and pressure distribution for arbitrary-dimensional lifting configuration. Geometry package generates input data from reduced amount of user-supplied configuration data. Calculated inviscid and viscous lift and pressure distribution agree well with experimental data for variety of wings and wing/fuselages. Program is in FORTRAN IV for batch execution on CYBER 175.
Program computes incompressible linear stability characteristics for swept and tapered wings. Amplification rates of boundary-layer disturbances also are calculated. Program is useful in designing tapered, laminar-flow control wings incorporating suction to prevent boundary layer separation. Program is written in FORTRAN IV and Assembler for batch execution on CYBER 70-series.
Program estimates cell probabilities for data observed to fall in one of two or more categories when exact category cannot be determined. Data are assumed to be randomly incomplete. Estimation minimizes risk of quadratic loss. Program should be useful in projects where multinomial data is analyzed, but where observations are sometimes incomplete. Program is in FORTRAN IV and Assembler for batch execution on CYBER 173.
Program solves physical problems governed by diffusion-type equations, provided that equations can be modeled by lumped-parameter representation. Program is used for thermal analysis, and could be adapted to solve Fourier, Poisson, and Laplace differential equations. Program is in FORTRAN IV and Assembler for execution on UNIVAC 1100-series or CYBER 175.
Three-dimensional corners occur in many aerodynamic engineering situations. Supersonic flow about such geometries is characterized by strong inviscid-viscid interactions which are analyzed adequately only through the solution of the Navier-Stokes equations. In this paper numerical solution for the laminar compressible Navier-Stokes equations are presented for a family of three-dimensional corners consisting of wedge-plate and wedge-cylinder intersecting boundaries. The equations of motion are transformed to a uniform rectangular computational domain. The computational technique is the MacCormack time-split algorithm vectorized and programmed to run on the CDD CYBER 203 computer. The metric data for the transformation is obtained from the 'two-boundary technique.'
A hybrid computational technique which splits the flowfield into inviscid and viscous regions is used to investigate the complete flowfield about axisymmetric parabolic blunt bodies in a supersonic stream. The solutions are carried out on the CDC CYBER-203 computer which, with its extensive memory, allows for the use of a large number of finite-difference mesh points, allowing resolution of important flowfield features. A range of freestream Mach number of 2-5 and a range of Re number based on nose radius of 500-125,000 was run for a sonic corner body. Contour plots of density, pressure, and Mach number, velocity vector plots, and surface distributions of pressure, heat transfer, and shear stress are presented. Also, correlations of the downstream extent of the base recirculation region with Re number based on nose radius are given.
An investigation was conducted into ways to improve the involvement of state and local user personnel in the digital image analysis process by isolating those elements of the analysis process which require extensive involvement by field personnel and providing means for performing those activities apart from a computer facility. In this way, the analysis procedure can be converted from a centralized activity focused on a computer facility to a distributed activity in which users can interact with the data at the field office level or in the field itself. A general image processing software was developed on the University of Minnesota computer system (Control Data Cyber models 172 and 74). The use of color hardcopy image data as a primary medium in supervised training procedures was investigated and digital display equipment and a coordinate digitizer were procured.
The Network Generation Program (NETGEN), which creates logic networks from task chart data is presented. NETGEN is written in CDC FORTRAN IV (Extended) and runs in a batch mode on the CDC 6000 and CYBER 170 series computers. Data is input via a two-card format and contains information regarding the specific tasks in a project. From this data, NETGEN constructs a logic network of related activities with each activity having unique predecessor and successor nodes, activity duration, descriptions, etc. NETGEN then prepares this data on two files that can be used in the Project Planning Analysis and Reporting System Batch Network Scheduling program and the EZPERT graphics program.
The finite element codes were improved using Hermitian elements and numerical integration of element relations. The question of real variable versus complex variable formulation was resolved and an integrated civil engineering system was implemented on the Georgia Tech Cyber 70/74. Efforts are underway to restructure the program to obtain the most efficient use of array storage.