Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Copper”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Molecular-dynamics simulations of stacking-fault-induced dislocation annihilation in prestrained ultrathin single-crystalline copper films

We report results of large-scale molecular-dynamics simulations of dynamic deformation under biaxial tensile strain of prestrained single-crystalline nanometer-scale-thick face-centered cubic (fcc) copper films. Our results show that stacking faults, which are abundantly present in fcc metals, may play a significant role in the dissociation, cross slip, and eventual annihilation of dislocations in small-volume structures of fcc metals. The underlying mechanisms are mediated by interactions within and between extended dislocations that lead to annihilation of Shockley partial dislocations or formation of perfect dislocations. Our findings demonstrate dislocation starvation in small-volume structures with ultrathin film geometry, governed by a mechanism other than dislocation escape to free surfaces, and underline the significant role of geometry in determining the mechanical response of metallic small-volume structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of sputter rate and crystal orientation on the distribution of carbon in polycrystalline copper surfaces treated by plasma immersion ion implantation

The sputter rate influences the resulting thickness of the carbon containing layer within a surface that was treated by plasma immersion ion implantation. Choosing a polycrystalline substrate with rather large crystals and a material with an inherent high sputter rate, inhomogeneous distributions of carbon over the substrate area due to different thicknesses of the incorporated carbon can be detected. A correlation of three factors namely the carbon x-ray intensity in electron probe microanalysis, the thickness of the carbon layer, and the sputter rate in depth profiling measurements via secondary ion mass spectrometry can be shown. Essential for these factors is the crystal orientation that is visualized by mapping via electron backscatter diffraction. The differences in carbon content due to the orientation are most likely one of the reasons that the adhesion of diamond-like carbon films on copper does not improve with an interlayer of implanted carbon.

36 MATERIALS SCIENCE↗

Copper Nanoparticle Synthesis By The Wire Explosion Technique

Wire explosion technique is performed by passing a high power pulsed current through a metallic wire to disintegrate it through Joule heating effect. In this work, the production of nanoparticles by the wire explosion technique has been investigated. Copper wires with a diameter of 125 mum and a length of 3.5 cm are exploded in air at two different pressures, namely, 1 bar and 10{sup -2} mbar. Particles produced from the wire explosion are collected for characterization. The characterization of the particles is done by using field emission scanning electron microscope (FE-SEM) and energy dispersive analysis by X-rays (EDAX). The morphology and chemical composition of the particles produced at the two different pressures are compared. Discharge current and optical emission spectra of the wire explosion at the two pressures are also presented.

36 MATERIALS SCIENCE↗

Enhancement of electrical property by oxygen doping to copper phthalocyanine in inverted top emitting organic light emitting diodes

We reported the evidence of oxygen doping to copper-phthalocyanine (CuPc) by O{sub 2}-plasma treatment to inverted top-emitting organic light-emitting diodes (ITOLEDs). In situ synchrotron-radiation photoelectron spectroscopy results showed that a new Cu-O bond appeared and the energy difference between the highest-occupied molecular orbital and E{sub F} is lowered by 0.15 eV after plasma treatment. The oxygen ions chemically interacted with Cu atoms and transferred charges to the CuPc. Thus the hole injection barrier was lowered, enhancing the electroluminescent property of ITOLEDs.

36 MATERIALS SCIENCE↗

MEASUREMENT OF ADHESION STRENGTH OF SOLID-STATE DIFFUSION BONDING BETWEEN NICKEL AND COPPER BY MEANS OF LASER SHOCK SPALLATION METHOD

Coating and bonding techniques between different materials are essential to the field of technology. Bond mechanism is of interest from scientific point of view. A well-established method to make bonding between unalloyed nickel and copper was utilized, that was solid-state diffusion bonding at elevated temperatures. Irradiation by Nd:YAG laser with 7ns-pulse width created shock wave that caused tensile stress after reflection at free surface. The adhesion strength was determined by the critical laser power that caused exfoliation of the bonding interface.

36 MATERIALS SCIENCE↗

Simulation and Experiment on Direct Continuous Casting Process of Lead Frame Copper Alloy

Direct Continuous Casting (D.C.C) is an important method in casting lead frame copper alloy. In this paper, numerical simulation is adopted to investigate the casting process in order to optimize the D.C.C technical parameters, such as the casting temperature, casting speed and cooling intensity. According to the numerical results, the reasonable parameters are that the casting temperature is between 1413 Kapprox1413 K, the casting speed is between 8 m/happrox10 m/h and the speed of cooling water is between 4.2 m/sapprox4.6 m/s. And the depth of liquid-solid boundary is measured in different casting temperature and casting speed by experiments. The results show the actual measurements have a little deviation with the numerical simulation. The results of numerical simulation provide the significant reference to the actual experiments.

36 MATERIALS SCIENCE↗

X-ray and EUV Emission Studies of Copper Vacuum Spark Plasma

A vacuum spark system with a copper anode and electrode of gap 1.5 mm is investigated for the purpose of developing it as a possible radiation source for Next Generation Lithography (NGL). At discharge voltage in the range of 10 to 15 kV and an ambient pressure of about 10{sup -3} mbar, both X-ray (measured by PIN diode) and extreme ultraviolet, EUV (measured by SXUV5A with integrated filter) can be measured simultaneously when good pinching discharge as indicated by sharp dip in the waveform of the rate of current is achieved. For discharge with mild pinching, only EUV emission is observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical conductivities of aluminum, copper, and tungsten observed by an underwater explosion

Conductivities of dense aluminum, copper, and tungsten are evaluated using exploding wire discharges in water. Evolutions of the radius and the electrical resistance of exploding wire are measured together with direct pyrometric estimation of the temperature. The conductivities are evaluated based on the measurements and their density dependence is compared with theoretical predictions at a fixed temperature. The results indicate that regardless of materials, the conductivity has a minimum around 3% of solid density at temperature of 5000 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-enabled growth of separated, vertically aligned copper-capped carbon nanocones on silicon

The formation of vertically aligned, clearly separated, copper-capped carbon nanocones with a length of up to 500 nm and base diameter of about 150 nm via three-stage process involving magnetron sputtering, N{sub 2} plasma treatment, and CH{sub 4}+N{sub 2} plasma growth is studied. The width of gaps between the nanocones can be controlled by the gas composition. The nanocone formation mechanism is explained in terms of strong passivation of carbon in narrow gaps, where the access of plasma ions is hindered and the formation of large C{sub n}H{sub 2n+2} molecules is possible. This plasma-enabled approach can be used to fabricate nanoelectronic, nanofluidic, and optoelectronic components and devices.

36 MATERIALS SCIENCE↗

A Quantitative Analysis of Room Temperature Recrystallization Kinetics in Electroplated Copper Films using High Resolution X-ray Diffraction

Time-resolved in situ x-ray diffraction measurements were used to study the room-temperature recrystallization kinetics of electroplated copper thin films with thicknesses between 400 and 1000 nm. The thinnest films exhibited limited recrystallization and subsequent growth of grains, while recrystallized grains in the thicker films grew until all as-plated microstructure was consumed. For all films, recrystallized grains that belonged to the majority texture component, <111>, started growing after the shortest incubation time. These grains exhibited volumetric growth until they achieved the film thickness. After this point the growth mode became planar, with the <111>-type grains growing in the plane of the film. Grains with the <111> direction normal to the film surface started growing after the <111>-type grains switched to planar growth. However, the planar growth of this texture component finished at the same time as the growth of the <111> grains. Profile fitting of the 111 peak permitted the separation of the diffraction signals from recrystallized and as-plated grain populations. The average strains in these two populations, calculated from the peak position of the corresponding {l_brace}111{r_brace} reflections, were different, indicating a heterogeneous stress state within this texture component. The increasing volume fraction of recrystallized <111> grains with time was monitored via the variation in the diffracted intensity. This variation could be represented by the Johnson-Mehl-Avrami-Kolmogorov model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cryogenic RF Material Testing with a High-Q Copper Cavity

An X-band RF cryogenic material testing system has been developed in the past few years. This system employs a high-Q copper cavity with an interchangeable flat bottom working under a TE{sub 013} like mode. By measuring the cavity Qs with a network analyzer, the system can characterize the surface resistance of different samples at different temperatures. Using a 50 MW 2{mu}s pulsed klystron, the system can measure the quenching H field for superconducting samples, up to 300-400 mT. In this paper, we will present the most recent developments of the system and testing results.

36 MATERIALS SCIENCE↗

Room Temperature ppb Level Chlorine Gas Sensor Based on Copper (II) 1, 4, 8, 11, 15, 18, 22, 25-octabutoxy-29 H, 31 H-phthalocyanine Films

Spin coating technique has been used to fabricate room temperature chlorine gas sensor based on copper (II) 1, 4, 8, 11, 15, 18, 22, 25-octabutoxy-29 H, 31 H-phthalocyanine (CuPc(OBu){sub 8}) films. Gas sensor shows a response of 185% to few parts per billion level of Cl{sub 2} gas with response time of 9.5 minutes at room temperature. The interactions between sensor and analytes followed first order kinetics with rate constant 0.01{<=}k{<=}0.02. The chemiresistive sensor showed very good stability at room temperature over a long period of time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface nanostructuring of laser ablated copper in ambient gas atmosphere and a magnetic field

A comprehensive study on deposition of copper nanoclusters back on to the laser ablated target in combined ambient of gas and a magnetic field is reported. The characteristics and mechanism of the inverse plume deposition are investigated by characterizing the laser ablated plasma plume using time resolved imaging and optical emission of the plume. The morphology of the deposited particles in presence of magnetic field depends on the nature of the ambient gas used; the elliptical shape of reverse deposited particles changes to spherical with the increase in mass of the ambient gas. The structural, morphological, and optical properties of the deposited nanoclusters were studied by using x-ray diffraction, scanning electron microscope and photoluminescence spectra respectively. The possibility of enhanced deposition rates in combined ambient gas and a magnetic field has potentials of industrial applications of the process.

36 MATERIALS SCIENCE↗

Hot hole-induced dissociation of NO dimers on a copper surface

We use reflection-absorption infrared spectroscopy (RAIRS) to study the photochemistry of NO on Cu(110) in the UV-visible range. We observe that the only photoactive species of NO on Cu(110) is the NO dimer, which is asymmetrically bound to the surface. RAIRS shows that photoinduced dissociation proceeds via breaking of the weak N-N bond of the dimer, photodesorbing one NO{sub g} to the gas phase and leaving one NO{sub ads} adsorbed on the surface in a metastable atop position. We model the measured wavelength-dependent cross sections assuming both electron- and hole-induced processes and find that the photochemistry can be described by either electron attachment to a level 0.3 eV above the Fermi energy E{sub F} or hole attachment to a level 2.2 eV below E{sub F}. While there is no experimental or theoretical evidence for an electron attachment level so close to E{sub F}, an occupied NO-related molecular orbital is known to exist at E{sub F}- 2.52 eV on the Cu(111) surface [I. Kinoshita, A. Misu, and T. Munakata, J. Chem. Phys. 102, 2970 (1995)]. We, therefore, propose that photoinduced dissociation of NO dimers on Cu(110) in the visible wavelength region proceeds by the creation of hot holes at the top of the copper d-band.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Laser-based Resonant Ultrasound Spectroscopy to Study Texture in Copper

Copper specimens having two distinct grain microstructures are investigated using laser resonant ultrasound spectroscopy (LRUS). One consists of randomly oriented crystallites and exhibits isotropic elastic behavior (two elastic constants) and the other is highly textured by rolling and exhibits anisotropic elastic behavior (three elastic constants). The elastic constants are measured using electron backscatter diffraction, LRUS, and time domain laser ultrasound (LU). The elastic constants for the isotropic sample obtained using EBSD, LU and LRUS agree closely. However, for the anisotropic sample, there is considerable disagreement between results obtained using LRUS and results obtained using LU and EBSD. Analysis revels that increasing the dimensionality of the modulus space leads to questions of whether the solution is unique to within experimental error. The consequence is that small uncertainties in the assumed symmetry of the elastic stiffness tensor for anisotropic materials can lead to large uncertainties in the calculated elastic constants.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Morphology of size-selected copper nanocluster film

We report a preliminary study of the morphology of size-selected Copper nanocluster film grown on Si substrate using a state of the art nanocluster deposition system. The clusters are produced in a dc magnetron and gasaggregation type cluster source at room temperature. The size or mass of the nanoclusters are analysed by a quadrupole mass filter. The morphology of cluster assembled surface has been investigated by Scanning electron microscopy (SEM) and atomic force microscopy (AFM).

36 MATERIALS SCIENCE↗

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

36 MATERIALS SCIENCE↗

A photoelectron spectroscopy study of the electronic structure evolution in CuInSe{sub 2}-related compounds at changing copper content

Evolution of the valence-band structure at gradually increasing copper content has been analysed by x-ray photoelectron spectroscopy (XPS) in In{sub 2}Se{sub 3}, CuIn{sub 5}Se{sub 8}, CuIn{sub 3}Se{sub 5}, and CuInSe{sub 2} single crystals. A comparison of these spectra with calculated total and angular-momentum resolved density-of-states (DOS) revealed the main trends of this evolution. The formation of the theoretically predicted gap between the bonding and non-bonding states has been observed in both experimental XPS spectra and theoretical DOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗