Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control Account”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Active power control of solar PV generation for large interconnection frequency regulation and oscillation damping

Because of zero greenhouse gas emission and decreased manufacture cost, solar photovoltaic (PV) generation is expected to account for a significant portion of future power grid generation portfolio. Because it is indirectly connected to the power grid via power electronic devices, solar PV generation system is fully decoupled from the power grid, which will influence the interconnected power grid dynamic characteristics as a result. In this study, the impact of solar PV penetration on large interconnected power system frequency response and inter-area oscillation is evaluated, taking the United States Eastern Interconnection (EI) as an example. Furthermore, based on the constructed solar PV electrical control model with additional active power control loops, the potential contributions of solar PV generation to power system frequency regulation and oscillation damping are examined. The advantages of solar PV frequency support over that of wind generator are also discussed. Finally, simulation results demonstrate that solar PV generations can effectively work as ‘actuators’ in alleviating the negative impacts they bring about.

14 SOLAR ENERGY↗

A Learning Framework for Control-Oriented Modeling of Buildings

Buildings consume a significant amount of energy worldwide. Several building optimization and control use cases require models of energy consumption which are control oriented, have high predictive capability, imposes minimal data pre-processing requirements, and have the ability to be adapted continuously to account for changing conditions as new data becomes available. Data driven modeling techniques, that have been investigated so far, while promising in the context of buildings, have been unable to simultaneously satisfy all the requirements mentioned above. In this context, deep learning techniques such as Recurrent Neural Networks (RNNs) hold promise, empowered by advanced computational capabilities and big data opportunities. In this paper, we propose a deep learning based methodology for the development of control oriented models for building energy management and test in on data from a real building. Results show that the proposed methodology outperforms other data driven modeling techniques significantly. We perform a detailed analysis of the proposed methodology along dimensions such as topology, sensitivity, and downsampling. Lastly, we conclude by envisioning a building analytics suite empowered by the proposed deep framework, that can drive several use cases related to building energy management.

buildings↗

Tailoring engineered cementitious composites for impact resistance

This paper presents results of deliberate tailoring of engineered cementitious composites (ECC) for impact resistance. Microstructure control involving fiber, matrix and fiber/matrix interface was based on steady-state dynamic crack growth analyses accounting for rate dependence of composite phases. Uniaxial tensile stress-strain curves of the resulting impact resistant ECC were experimentally determined for strain rates ranging from 10{sup -5} s{sup -1} to 10{sup -1} s{sup -1}. Low speed drop weight tower test on ECC panels and beams was also conducted. Damage characteristics, load and energy dissipation capacities, and response to repeated impacts, were studied.

36 MATERIALS SCIENCE↗

The 3D printing and modeling of functionally graded Kelvin foams for controlling crushing performance

Mechanical impact protection is an important consideration in many applications, ranging from product transportation to sports. Cellular materials are typically used due to their desirable energy absorption properties and light weight. However, their large deformation and rate dependent responses (especially of polymer foams) are challenging to consider in design. Additionally, the use of foams with uniform properties, such as uniform density and uniform stiffness, often restricts the designed foams to only be suitable for a narrow range of mechanical impact conditions whereas real applications commonly face unpredictable situations. 3D printing offers fabrication flexibility and thus opens the door to create foams with tailored properties. In this work, we investigate the feasibility of using 3D printing for functionally graded foams (FGFs) that are optimal over a broad range of mechanical environments. The foams are fabricated by the recently developed grayscale digital light processing (g-DLP) method which can print parts with locally designed properties. These foams are tested under drop test conditions and with slower displacement control. We also model the large deformation behavior of FGFs using finite element analysis in which we account for the different viscoelastic behaviors of the distinct grayscale regions. We then use the model to examine the impact mitigation capabilities of FGFs in different loading scenarios. Finally, we show how FGFs can be used to satisfy real-world design goals using the case study of a motorcycle helmet. In contrast to prior work, we investigate continuous, functionally graded foams of a single density that differ in their viscoelastic responses. This work provides further insight into the benefits of viscoelastic properties and modulus graded foams and presents a manufacturing approach that can be used to produce the next generation of flexible lattice foams as mechanical absorbers.

3D printing↗

Preparation of In{sub 2}O{sub 3} octahedrons by heating InCl{sub 3} aqueous solution on the Si substrate

In{sub 2}O{sub 3} octahedrons have been synthesized by heating InCl{sub 3} aqueous solution on the Si substrate at 400-900 deg. C for 2 h. The average size of In{sub 2}O{sub 3} octahedrons is decreased by increasing the heating temperature. The In{sub 2}O{sub 3} octahedrons are single-crystalline with the body-centered cubic structure and have controllable sizes in the range of 0.7-1.0 {mu}m. A possible mechanism was also proposed to account for the formation of In{sub 2}O{sub 3} octahedrons. A strong photoluminescence with a peak at 458 nm was observed from the In{sub 2}O{sub 3} octahedrons at room temperature. This emission can be attributed to oxygen vacancies and indium-oxygen vacancy centers.

36 MATERIALS SCIENCE↗

Selective triplet exciton formation in a single molecule

The formation of excitons in organic molecules by charge injection is an essential process in organic light-emitting diodes (OLEDs). According to a simple model based on spin statistics, the injected charges form spin-singlet (S1) excitons and spin-triplet (T 1 ) excitons in a 1:3 ratio. After the first report of a highly efficient OLED based on phosphorescence, which is produced by the decay of T 1 excitons, more effective use of these excitons has been the primary strategy for increasing the energy efficiency of OLEDs. Another route to improving OLED energy efficiency is reduction of the operating voltage. Because T 1 excitons have lower energy than S 1 excitons (owing to the exchange interaction), use of the energy difference could—in principle—enable exclusive production of T 1 excitons at low OLED operating voltages. However, a way to achieve such selective and direct formation of these excitons has not yet been established. Here we report a single-molecule investigation of electroluminescence using a scanning tunnelling microscope and demonstrate a simple method of selective formation of T 1 excitons that utilizes a charged molecule. A 3,4,9,10-perylenetetracarboxylicdianhydride (PTCDA) molecule adsorbed on a three-monolayer NaCl film atop Ag(111) shows both phosphorescence and fluorescence signals at high applied voltage. In contrast, only phosphorescence occurs at low applied voltage, indicating selective formation of T 1 excitons without creating their S 1 counterparts. The bias voltage dependence of the phosphorescence, combined with differential conductance measurements, reveals that spin-selective electron removal from a negatively charged PTCDA molecule is the dominant formation mechanism of T 1 excitons in this system, which can be explained by considering the exchange interaction in the charged molecule. Our findings show that the electron transport process accompanying exciton formation can be controlled by manipulating an electron spin inside a molecule. We anticipate that designing a device taking into account the exchange interaction could realize an OLED with a lower operating voltage.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anions in Crystal Engineering

This tutorial review presents a current account of anions in crystal engineering, organized around two main questions: (i) how do anions influence and control crystal structures, and (ii) how do crystal environments recognize and select anions? The first part pertains to deliberate assembly of new crystalline materials using anionic components, by taking advantage of the strong and directional interactions of anions in the solid state. Along this line, the various structural roles of anions in crystals are examined. The second question is related to selective separation of anions by crystallization, by exploiting chemical recognition phenomena in the well-defined and highly structured environment inside crystals.

36 MATERIALS SCIENCE↗

Aerosol-assisted synthesis and assembly of nanoscale building blocks

We describe how aerosol methods, including spray drying and spray pyrolysis, represent industrial scale routes to materials on account of their continuous nature. Recently, these methods have been used to prepare size-, shape- and architecturally controlled nanostructures for a range of inorganic materials. In this Feature Article, a brief overview of traditional aerosol methods is provided. Then, the new chemical methods that have been integrated into aerosol techniques to achieve high quality nanomaterials are highlighted. Given that the properties of nanomaterials are dependent on their structural features, these synthetic advances help to address the critical need for new nanomanufacturing routes to materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Model of a laser gyroscope with frequency dithering

The model of a laser gyroscope (LG) with frequency dithering is described by a system of recurrent equations for the electric fields of counterpropagating waves. The phenomenon of frequency locking is taken into account in the form of the wave coupling through backward scattering; the frequency bias factor is the controlled phase nonreciprocity. The character of the output signal is considered, which corresponds to two types of frequency dithering, namely, sinusoidal and in the form of meander that are produced by various methods, including intracavity phase modulation. Results of calculation of a frequency characteristic of the LG are presented as functions of frequency dithering, rotational velocity and LG parameters. It is shown that the method of processing an output signal by measuring the time interval between intensity oscillations has an advantage due to the absence of so-called dynamic lock-in zones in the output characteristic. (laser gyroscope)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Planet traps and planetary cores: origins of the planet-metallicity correlation

Massive exoplanets are observed preferentially around high metallicity ([Fe/H]) stars while low-mass exoplanets do not show such an effect. This so-called planet-metallicity correlation generally favors the idea that most observed gas giants at r < 10 AU are formed via a core accretion process. We investigate the origin of this phenomenon using a semi-analytical model, wherein the standard core accretion takes place at planet traps in protostellar disks where rapid type I migrators are halted. We focus on the three major exoplanetary populations—hot Jupiters, exo-Jupiters located at r ≅ 1 AU, and the low-mass planets. We show using a statistical approach that the planet-metallicity correlations are well reproduced in these models. We find that there are specific transition metallicities with values [Fe/H] = –0.2 to –0.4, below which the low-mass population dominates, and above which the Jovian populations take over. The exo-Jupiters significantly exceed the hot Jupiter population at all observed metallicities. The low-mass planets formed via the core accretion are insensitive to metallicity, which may account for a large fraction of the observed super-Earths and hot-Neptunes. Finally, a controlling factor in building massive planets is the critical mass of planetary cores (M {sub c,} {sub crit}) that regulates the onset of rapid gas accretion. Assuming the current data is roughly complete at [Fe/H] > –0.6, our models predict that the most likely value of the 'mean' critical core mass of Jovian planets is (M {sub c,} {sub crit}) ≅ 5 M {sub ⊕} rather than 10 M {sub ⊕}. This implies that grain opacities in accreting envelopes should be reduced in order to lower M {sub c,} {sub crit}.

79 ASTRONOMY AND ASTROPHYSICS↗

Propagation and attenuation of sound in one-dimensional quantum liquids

At low temperatures, elementary excitations of a one-dimensional quantum liquid form a gas that can move as a whole with respect to the center of mass of the system. This internal motion attenuates at exponentially long time scales. As a result, in a broad range of frequencies, the liquid is described by two-fluid hydrodynamics, and the system supports two sound modes. The physical nature of the two sounds depends on whether the particles forming the quantum liquid have a spin degree of freedom. For particles with spin, the modes are analogous to the first and second sound modes in superfluid 4 He, which are the waves of density and entropy, respectively. When dissipative processes are taken into account, we find that at low frequencies, the second sound is transformed into heat diffusion, while the first sound mode remains weakly damped and becomes the ordinary sound. In a spinless liquid, the entropy and density oscillations are strongly coupled and the resulting sound modes are hybrids of the first and second sound. As the frequency is lowered and dissipation processes become important, the crossover to a single-fluid regime occurs in two steps. First the hybrid modes transform into predominantly density and entropy waves, similar to the first and second sound, and then the density wave transforms to the ordinary sound and the entropy wave becomes a heat-diffusion mode. Lastly, we account for the dissipation due to viscosity and intrinsic thermal conductivity of the gas of excitations, which controls attenuation of the sound modes at high frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Insulating band gaps both below and above the Néel temperature in d -electron LaTi O 3 , LaV O 3 , SrMn O 3 , and LaMn O 3 perovskites as a symmetry-breaking event

Metal d-electron oxides having an odd number of electrons per cell should exhibit band degeneracy at the Fermi energy, making them, in band theory, formally metallic. In many cases, however, these are “false metals”, as evidenced by the observation that many ABO 3 oxide perovskites with a magnetic 3d B-atom are observed to be insulators both below and above the Néel temperature. These inconsistencies between experimental observation and expectation have historically been resolved by invoking degeneracy-breaking physics, based largely on -pure electron effects, such as strong interelectronic correlation for d-electron compounds (the Mott mechanism). Such explanations generally consider microscopic lattice or magnetic degrees of freedom (m-DOF) as largely passive spectators, not a cause of the formally metallic being an insulator. Yet, it has long been known that ABO 3 perovskites can manifest an arrangement of m-DOFs in the form of octahedral tilting, bond dimerization, Jahn-Teller distortions, and ordering of local magnetic moments. It appears reasonable that such structural and magnetic local degrees of freedom need to be allowed to compete with purely electronic strong correlation. To answer this question, we explored a range of d-electron oxide perovskites exemplified by the archetypes LaTiO 3 , LaVO 3 , SrMnO 3 , and LaMnO 3 with 1, 2, 3, or 4 d -electrons, respectively. Using a mean-field-like electronic structure method (here, density functional theory), we find that a combination of magnetic symmetry breaking with structural distortions can account for insulating band gaps in this series while at the same time correctly predicting for the control case an intrinsic paramagnetic metal in SrVO 3 as symmetry-breaking is insufficiently strong to remove the degeneracy. Finally, this indicates that calculating quantitatively local magnetic and positional symmetry-breaking motifs in unit cells that avoid averaging at the outset over the low symmetry motifs can provide consistent trends in a Mott transition without Mott U.

36 MATERIALS SCIENCE↗

Reduced-Order Modeling of Aggregated Thermostatic Loads With Demand Response

Demand Response is playing an increasingly important role in smart grid control strategies. Modeling the behavior of populations of appliances under demand response is especially important to evaluate the effectiveness of these demand response programs. In this paper, an aggregated model is proposed for a class of Thermostatically Controlled Loads (TCLs). The model efficiently includes statistical information of the population, systematically deals with heterogeneity, and accounts for a second-order effect necessary to accurately capture the transient dynamics in the collective response. However, an accurate characterization of the collective dynamics however requires the aggregate model to have a high state space dimension. Most of the existing model reduction techniques require the stability of the underlying system which does not hold for the proposed aggregated model. In this work, a novel model reduction approach is developed for the proposed aggregated model, which can significantly reduce its complexity with small performance loss. The original and the reducedorder aggregated models are validated against simulations of thousands of detailed building models using GridLAB-D, which is a realistic open source distribution simulation software. Index Terms – demand response, aggregated model, ancillary

Zhang, Wei↗

Double Deep Q-Networks for Optimizing Electricity Cost of a Water Heater

Electric water heaters represent 14% of the electricity consumption in the residential buildings and the cost associated with domestic water heating account for a good portion of the household expenses in the United States. In this context, intelligent control of water heaters gained a lot of research attention. In recent years, a significant number of intelligent water heater controllers, with various methods and intended uses, have been proposed. However, existing studies are mostly model-based approaches that require an accurate modelling of the water heater. Towards addressing this research gap, this paper presents a model-free reinforcement learning-based controller for a day-ahead price market. The controller aims to minimize the cost of domestic water heating while maintaining the user comfort. The results showed that the developed controller can help save energy cost while maintaining the temperatures within the desired comfort band.

Amasyali, Kadir↗

Monte Carlo Hauser-Feshbach computer code system to model nuclear reactions: YAHFC

A computer program framework, YAHFC, to model low-energy nuclear reactions is presented. The framework allows for reactions with incident particles ranging from protons/neutrons to alphas and is designed to address reactions that ultimately lead to the formation of compound nuclear systems that then decay statistically as outlined in concepts of Hauser and Feshbach. Additionally, instead of a reaction, it is also possible to model the decay of a nuclear system with an initial excitation and population. The code models nuclear decays with a Monte Carlo process that tracks the decay of each state. This allows for an exact representation of the spectra for all emitted particles in each of the final exit channels and the possibility of generating reaction data for simulation purposes. The program is interfaced with the optical model code system FRESCOX to calculate transmission coefficients as well as the effects of coupled channels and other direct excitations via the distorted wave Born approximation (DWBA). Modules are included to account for nuclear processes such as width corrections, pre-equilibrium emission, and fission. The program is controlled by a series of input commands and while a set of input parameters exists for each projectile and target, the input commands allow for complete control over each input parameter. Extensive data files are produced and a program is provided that converts YAHFC data files into nuclear data library entries in the generalized nuclear data structure (GNDS).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Welding at the Kennedy Space Center.

Brief description of the nature of the mechanical equipment at a space launch complex from a welding viewpoint. including an identification of the major welding applications used in the construction of this complex. The role played by welding in the ground support equipment is noted, including the welded structures and systems required in the vehicle assembly building, the mobile launchers, transporters, mobile service structure, launch pad and launch site, the propellants system, the pneumatics system, and the environmental control system. The welding processes used at the Kennedy Space Center are reviewed, and a particularly detailed account is given of the design and fabrication of the liquid hydrogen and liquid oxygen storage spheres and piping. Finally, the various methods of testing and inspecting the storage spheres are cited.

Clautice, W. E.↗

Propagation mechanism of daytime Pc 3-4 pulsations observed at synchronous orbit and multiple ground-based stations

Observational data obtained during the last two decades show that the amplitude of daytime Pc 3-4 magnetic pulsations is controlled by the solar wind conditions. The high degree of correlation between the solar wind parameters and Pc 3-4 pulsations in the dayside magnetosphere suggests that the ultimate cause of the daytime Pc 3-4 pulsations must be the interaction of the solar wind with the earth's magnetosphere. The present paper is concerned with details regarding the control of the properties of the Pc 3-4 pulsations by the solar wind parameters, taking into account observations made at multiple ground-based stations. It is attempted to establish the relation between the daytime Pc 3-4 pulsations at the ground stations and the compressional Pc 3-4 waves in the magnetosphere. Attention is given to the most probable propagation mechanism of the daytime Pc 3-4 pulsations in the magnetosphere.

Yumoto, K.↗