Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Local intensity adaptive image coding

The objective of preprocessing for machine vision is to extract intrinsic target properties. The most important properties ordinarily are structure and reflectance. Illumination in space, however, is a significant problem as the extreme range of light intensity, stretching from deep shadow to highly reflective surfaces in direct sunlight, impairs the effectiveness of standard approaches to machine vision. To overcome this critical constraint, an image coding scheme is being investigated which combines local intensity adaptivity, image enhancement, and data compression. It is very effective under the highly variant illumination that can exist within a single frame or field of view, and it is very robust to noise at low illuminations. Some of the theory and salient features of the coding scheme are reviewed. Its performance is characterized in a simulated space application, the research and development activities are described.

Huck, Friedrich O.↗

NASA Lewis Stirling engine computer code evaluation

In support of the U.S. Department of Energy's Stirling Engine Highway Vehicle Systems program, the NASA Lewis Stirling engine performance code was evaluated by comparing code predictions without engine-specific calibration factors to GPU-3, P-40, and RE-1000 Stirling engine test data. The error in predicting power output was -11 percent for the P-40 and 12 percent for the Re-1000 at design conditions and 16 percent for the GPU-3 at near-design conditions (2000 rpm engine speed versus 3000 rpm at design). The efficiency and heat input predictions showed better agreement with engine test data than did the power predictions. Concerning all data points, the error in predicting the GPU-3 brake power was significantly larger than for the other engines and was mainly a result of inaccuracy in predicting the pressure phase angle. Analysis into this pressure phase angle prediction error suggested that improvements to the cylinder hysteresis loss model could have a significant effect on overall Stirling engine performance predictions.

Sullivan, Timothy J.↗

HOMAR: A computer code for generating homotopic grids using algebraic relations: User's manual

A computer code for fast automatic generation of quasi-three-dimensional grid systems for aerospace configurations is described. The code employs a homotopic method to algebraically generate two-dimensional grids in cross-sectional planes, which are stacked to produce a three-dimensional grid system. Implementation of the algebraic equivalents of the homotopic relations for generating body geometries and grids are explained. Procedures for controlling grid orthogonality and distortion are described. Test cases with description and specification of inputs are presented in detail. The FORTRAN computer program and notes on implementation and use are included.

Moitra, Anutosh↗

Experimental program for real gas flow code validation at NASA Ames Research Center

The experimental program for validating real gas hypersonic flow codes at NASA Ames Rsearch Center is described. Ground-based test facilities used include ballistic ranges, shock tubes and shock tunnels, arc jet facilities and heated-air hypersonic wind tunnels. Also included are large-scale computer systems for kinetic theory simulations and benchmark code solutions. Flight tests consist of the Aeroassist Flight Experiment, the Space Shuttle, Project Fire 2, and planetary probes such as Galileo, Pioneer Venus, and PAET.

Deiwert, George S.↗

Determining mode excitations of vacuum electronics devices via three-dimensional simulations using the SOS code

The SOS code is used to compute the resonance modes (frequency-domain information) of sample devices and separately to compute the transient behavior of the same devices. A code, DOT, is created to compute appropriate dot products of the time-domain and frequency-domain results. The transient behavior of individual modes in the device is then plotted. Modes in a coupled-cavity traveling-wave tube (CCTWT) section excited beam in separate simulations are analyzed. Mode energy vs. time and mode phase vs. time are computed and it is determined whether the transient waves are forward or backward waves for each case. Finally, the hot-test mode frequencies of the CCTWT section are computed.

Warren, Gary↗

The development of an intelligent interface to a computational fluid dynamics flow-solver code

Researchers at NASA Lewis are currently developing an 'intelligent' interface to aid in the development and use of large, computational fluid dynamics flow-solver codes for studying the internal fluid behavior of aerospace propulsion systems. This paper discusses the requirements, design, and implementation of an intelligent interface to Proteus, a general purpose, three-dimensional, Navier-Stokes flow solver. The interface is called PROTAIS to denote its introduction of artificial intelligence (AI) concepts to the Proteus code.

Williams, Anthony D.↗

Codes and modalities in multiple resources - A success and a qualification

The relevance of codes and modalities in a multiple-resource model to the prediction of task interference was investigated in an experiment in which either verbal or spatial decision tasks, responded to with either voice or key press, were time-shared with second-order tracking. Results indicate the importance of the dichotomy between verbal and spatial processing codes in accounting for task interference. Interference with tracking was consistently greater, and difficulty/performance trade-offs were stronger, when the spatial decision task was performed and the manual response was used. A review of the literature on the interference between a continuous visual task and a discrete task whose modality is either auditory or visual suggests that scanning produces a dominant cost to intramodal configurations when visual channels are separated in space. In absence of visual separation, the differences between cross-modal and intramodal performance may be best accounted for by a mechanism of preemption.

Wickens, Christopher D.↗

Vector excitation coding with dynamic bit allocation

Vector excitation coding (VXC) has shown promise for digital transmission of fairly high communications quality speech at low bit rates, but current version of the algorithm still suffer from audible degradations, particularly at 4.8 kb/s. The authors examine the technique of dynamic bit allocation (DBA) to improve the performance of VXC for a given bit rate. The approach is based on the observation that the minimum bit rate needed to code adequately both the long-term and short-term predictors in VXC varies dynamically with time. Therefore, in frames where fewer bits suffice for the predictors, the unneeded bits can be reallocated to other coder parameter sets such as excitation vectors. By dynamically distributing available bits among the different coder parameter sets while keeping the total number of bits in each frame fixed, it is possible to improve overall coder performance without increasing bit rate.

Yong, Mei↗

Application of the hypercube parallel processor to a large-scale moment method code

The applicability of a parallel computing architecture to the solution of a large-scale moment-method code is investigated. Specifically, the NEC (Numerical Electromagnetics Code) method-of-moments scattering program is implemented on a hypercube parallel processor. The accuracy and the increase in the speed of execution on this parallel architecture are demonstrated. The results show a very large reduction in execution time for large problems. The great potential of this parallel processor is shown for interactive solution of large NEC problems as well as other moment-method techniques such as the finite-element method.

Manshadi, Farzin↗

Some algorithmic problems of plotting codes for unstructured grids

Some algorithmic problems encountered during the development of unstructured grid plotting codes are described. Chief among them are the interpolation of three-dimensional data on planes, the plotting of a three-dimensional surface with a constant value for a given unknown, and the calculation of particle and oil-flow paths. Some special features of the unstructured grid plotting code, FEPLOT3D, are also described.

Loehner, Rainald↗

A validation study of four Navier-Stokes codes for high-speed flows

A code validation study has been conducted for four different codes for solving the compressible Navier-Stokes equations. Computations for a series of nominally two-dimensional high-speed laminar separated flows were compared with detailed experimental shock-tunnel results. The shock wave-boundary layer interactions considered were induced by a compression ramp in one case and by an externally-generated incident shock in the second case. In general, good agreement was reached between the grid-refined calculations and experiment for the incipient- and small-separation conditions. For the most highly separated flow, three-dimensional calculations which included the finite-span effects of the experiment were required in order to obtain agreement with the data. The finite-span effects were important in determining the extent of separation as well as the time required to establish the steady-flow interaction. The results presented provide a resolution of discrepancies with the experimental data encountered in several recent computational studies.

Rudy, David H.↗

The POLAR code wake model - Comparison with in situ observations

Measurements made by the plasma diagnostics package during Spacelab 2 are discussed and compared with predictions made with the Air Force Geophysics Laboratory POLAR wake code. This code uses a complex geometric model of the orbiter and the self-similar solution of the expansion of a plasma into a vacuum as its model basis. Excellent qualitative and quantitative agreement is found at distances greater than about 30 m. At least to the first order, the model's approximations are justified.

Murphy, G.↗

Simplified Correction Of Errors In Reed-Solomon Codes

New decoder realized by simplified pipeline architecture. Simplified procedure for correction of errors and erasures in Reed-Solomon codes expected to result in simpler decoding equipment. Development widens commercial applicability of Reed-Solomon codes, used to correct bursts of errors in digital communication and recording systems. Improved decoder less complex. Made more regular, simple, and suitable for implementation in both VLSI and software.

Truong, T. K.↗

Multiple-Trellis-Coded Modulation

Theoretical gain over simple multiple-phase-shift keying at least 2 to 3 decibels. Multiple-trellis-coded modulation scheme combined with M-ary modulation shows theoretically to yield asymptotic gains in performance over uncoded multiple-phase-shift keying, while employing symmetric multiple-phase-shift signal constellations and avoiding code catastrophe. Suitable for satellite and terrestrial-mobile/satellite communications or other communications requiring burst-error correction. Extended to such higher dimensional modulations as quadrature amplitude modulation.

Divsalar, D.↗

Computer-Access-Code Matrices

Authorized users respond to changing challenges with changing passwords. Scheme for controlling access to computers defeats eavesdroppers and "hackers". Based on password system of challenge and password or sign, challenge, and countersign correlated with random alphanumeric codes in matrices of two or more dimensions. Codes stored on floppy disk or plug-in card and changed frequently. For even higher security, matrices of four or more dimensions used, just as cubes compounded into hypercubes in concurrent processing.

Collins, Earl R., Jr.↗

Simplified Correlator For Ranging Codes

Improved correlating subsystem of pseudorandom-code ranging system made possible by advent of fast, custom-made, very-large-scale integrated circuits. Performs far fewer arithmetical operations, contains much less specialized analog and digital circuitry, and used with large number of different codes.

Tausworthe, R. C.↗

Procedure For Labeling Linear Finite-State Codes

Method for labeling state diagrams of linear finite-state codes developed. Simplifies implementation of encoder hardware. Used to label state diagram not completely connected to obtain linear finite-state code that has larger free distance.

Cheung, Kar-Ming↗

Systems Improved Numerical Fluids Analysis Code

Systems Improved Numerical Fluids Analysis Code, SINFAC, consists of additional routines added to April, 1983, version of SINDA. Additional routines provide for mathematical modeling of active heat-transfer loops. Simulates steady-state and pseudo-transient operations of 16 different components of heat-transfer loops, including radiators, evaporators, condensers, mechanical pumps, reservoirs, and many types of valves and fittings. Program contains property-analysis routine used to compute thermodynamic properties of 20 different refrigerants. Source code written in FORTRAN 77.

Costello, F. A.↗