Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPETENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Localization properties and high-fidelity state transfer in hopping models with correlated disorder

We investigate a tight-binding chain featuring diagonal and off-diagonal disorder, these being modeled through the long-range-correlated fractional Brownian motion. Particularly, by employing exact diagonalization methods, we evaluate how the eigenstate spectrum of the system and how its related single-particle dynamics respond to both competing sources of disorder. Moreover, we report the possibility of carrying out efficient end-to-end quantum-state transfer protocols even in the presence of such generalized disorder due to the appearance of extended states around the middle of the band in the limit of strong correlations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic field-, strain-, and disorder-induced responses in an energy spectrum of graphene

We study numerically a role of the uniaxial tensile strains and disordered defects in their impact on electronic density of states (DOS) in graphene exposed to an external magnetic field. The DOS curves are calculated using the tight-binding Hamiltonian, where the perpendicular magnetic field and uniaxial tension are included via the relevant modifications of the hopping parameters. Observed non-equidistant Landau levels (LLs) in the energy spectrum of a defectless graphene undergo the displacement towards the non-shiftable zero-energy Landau level (LL), thus they get contraction as the uniaxial tension is applied independently on the stretching direction. The presence of both point and extended defects reduces LLs peaks, broadens, smears, and can even suppress the LLs depending on a degree of disorders, their strength, and largely effective ranges. Splitting of the zero-energy LL is observable in case of a short-range disorder. Alteration of the localized electronic states in graphene is sensitive to the axis of strain: the uniaxial tensile strains along armchair- and zigzag-edge directions can result to competing phenomena associated with enhancement and reduction of the DOS, respectively. Mutual action of the perpendicular magnetic field and uniaxial stress along the zigzag-edge direction in graphene contributes to the band gap observed in its energy spectrum: the gap becomes more pronounced and even wider as compared with that emerges in case of a zigzag strain effect only, i.e. beyond magnetic field effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A unique but flexible space–time could challenge multiverse theories

Highlights: The growing law of a billiard multiverse is independent of the discretization scale E. The time for any final state to be accessible from any initial one is around 3E shocks. The paths of billiard balls can change without changing initial or final states. Space-time flexibility can be achieved through paths commutations and entanglement. -- Abstract: In a previous paper (Guillemant et al., 2018), we have shown using a 2D billiard toy model that the propagation of uncertainties resulting from space–time discretization leads to a classical multiverse. In this one we estimate the growing law of the number of its branches, thanks to an original shock indexation method that permits a very fast comparison of trajectories. For different involved parameters we use random sets of infinitesimally perturbed initial conditions. From each set, we compute a collection up to hundred millions of different billiard histories. Our main result is the calculation of a Brownian saturation time when the number of branches begins to exceed the total number of billiard states. We discuss the possibility suggested by this result to change locally the paths of objects without changing their past and future histories and then subverting their global system. We conclude that a unique but flexible space–time could compete with the current many-worlds interpretation claiming that each branch is a different universe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient transfer hydrodehalogenation of halophenols catalyzed by Pd supported on ceria

We report the transfer hydrodehalogenation (THD) of halophenols is efficiently catalyzed by palladium supported on high surface area ceria (Pd/CeO 2 ) under mild conditions (65 °C) using isopropanol (iPrOH) as hydrogen source. The reactivity of 4-halophenols (4-X-PhOH) varies in the order 4-F-PhOH > 4-Cl-PhOH > 4-Br-PhOH > > 4-I-PhOH and appears to be controlled by the desorption of halides from the catalyst surface. Kinetic analysis of the reactions and temperature programmed surface reaction (TPSR) experiments indicate that oxidative addition of C-X bonds and H-abstraction from isopropoxide compete for the same active sites on Pd. The catalyst was able to conduct the THD of various hazardous pollutants and emerging contaminants (dichlorodiphenyltrichloroethane (DDT), pentachlorophenol, pentafluorophenol and triclosan).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of residual chlorine on Ru/TiO 2 active sites during CO 2 methanation

Titania-supported ruthenium (Ru/TiO 2 ) is an established catalyst for the hydrogenation of carbon dioxide to methane (Sabatier reaction). Chlorine contamination, owed to the RuCl 3 precursor, is demonstrated to have a detrimental impact on methanation activity. After calcination and reduction the catalyst contains residual chlorine, shown by XPS. An aqueous ammonia wash removes Cl without leaching Ru. The washed catalysts exhibit improvements in CH 4 site-time yields. Low Ru loading catalysts encounter the greatest activity enhancements after washing (~4.5-fold). DFT calculations indicate that chlorine and CO 2 directly compete for adsorption on Ru step sites, with Cl impeding the adsorption of CO 2 at under-coordinated sites and at higher Cl coverages. H 2 -chemisorption/TPR show that Cl removal lowers the onset of low temperature H 2 dissociation on Ru. Finally, DRIFTS provide evidence that the removal of Cl facilitates low temperature dissociative binding of CO 2 , indicated by the formation of surface bound linear CO species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward hydrogen economy: Selective guaiacol hydrogenolysis under ambient hydrogen pressure

The conversion of guaiacol into the nylon precursors, cyclohexanol and cyclohexanone, is catalyzed by palladium supported on high surface area ceria (Pd/HS CeO 2 ) under mild conditions (100 °C, ≤1 bar H 2 ) via sequential hydrodemethoxylation and hydrogenation. In contrast, the 2-methoxycyclohexanol side product is generated by direct guaiacol hydrogenation. Reaction selectivity is determined by competing CO bond hydrogenolysis versus arene hydrogenation. Hydrogenolysis selectivity increases as H 2 pressure decreases, and over 80 % H 2 is incorporated into the products at 1 bar H 2 . Higher reactivity of guaiacol than anisole implies that the hydroxyl group is essential in Pd/HS CeO 2 catalysis. Participation of water in the conversion is evidenced by deuterium incorporation at non-exchangeable positions when the reaction is performed in D 2 O. Here, the combination of near quantitative mass balance of H 2 , high recyclability, and use of water as a solvent offers a simple, green and efficient conversion of lignin-derived aromatics into commercial products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic production of δ-valerolactone (DVL) from biobased 2-hydroxytetrahydropyran (HTHP) – Combined experimental and modeling study

δ-Valerolactone (DVL) is a five-carbon (C5) cyclic ester that can undergo ring-opening polymerization to yield high-performance, biocompatible polyesters. But current market prices of C5 chemicals like DVL are very high due to poor availability of C5 feedstock in petroleum. Herein, we demonstrate a novel route to DVL synthesis via dehydrogenation of biomass-derived 2-hydroxytetrahydropyran (HTHP) over Cu/SiO 2 without the use of toxic reagents. Since HTHP exists in thermal equilibrium with 3,4-dihydropyran (DHP) via dehydration, and with 2,2’-oxybis(tetrahydropyran) and 5-(tetrahydropyran-2-yloxy)pentanal via acetalization, we have also determined the thermochemistry (ΔH rxn and ΔG rxn ) of each competing reaction using density functional theory (DFT) calculations at the M06-2X/cc-pVTZ level. Finally, by developing a kinetic model of all 8 reactions involved, we have achieved 84% selectivity to DVL at 150°C in a packed bed reactor for over 72 hours of time on stream.

42 ENGINEERING↗

Migration of Al within dealuminated beta extruded catalysts influences olefin distribution during ethanol upgrading

Zeolites serve as essential catalytic platforms for many industrial processes, including emerging ethanol-to-olefins (ETO) upgrading technologies. Although metal-loaded (Cu, Zn, Y) dealuminated beta (deAlBeta) zeolite powders are promising catalysts for direct ETO conversion with high selectivity to butene-rich C3+ olefins necessary for production of sustainable aviation fuels (SAF), development of these materials as shaped technical bodies through the incorporation of binders is required for scale-up and commercial viability. Here, we report the ethanol upgrading performance of Cu-Zn-Y/deAlBeta extruded catalysts formulated with either alumina or kaolin clay binders. Both extrudates exhibit high ethanol dehydration reactivity which competes with the initial ethanol dehydrogenation step in the direct ETO reaction network. Consequently, elevated selectivity to dehydration side products (ethylene, diethyl ether) at ∼100% ethanol conversion is observed on Cu-Zn-Y/deAlBeta extrudates compared to the powder catalyst, which inhibits production of desired C3+ olefins. Utilizing microscopy and spectroscopic characterizations, we attribute this to Al migration from binder to zeolite particles within the extrudates, thus re-aluminating the zeolite and generating Brønsted acid sites active for dehydration reactions. This work elucidates the effects of binder incorporation on ETO product distributions and emphasizes that binder selection must be carefully considered during design of extruded zeolite catalysts.

Jacobs, Hunter [ORNL] (ORCID:000000016190874X)↗

Adapting a GIS-Based Multicriteria Decision Analysis Approach for Evaluating New Power Generating Sites

There is a growing need to site new power generating plants that use cleaner energy sources due to increased regulations on air and water pollution and a sociopolitical desire to develop more clean energy sources. To assist utility and energy companies as well as policy-makers in evaluating potential areas for siting new plants in the contiguous United States, a geographic information system (GIS)-based multicriteria decision analysis approach is presented in this paper. The presented approach has led to the development of the Oak Ridge Siting Analysis for power Generation Expansion (OR-SAGE) tool. The tool takes inputs such as population growth, water availability, environmental indicators, and tectonic and geological hazards to provide an in-depth analysis for siting options. To the utility and energy companies, the tool can quickly and effectively provide feedback on land suitability based on technology specific inputs. However, the tool does not replace the required detailed evaluation of candidate sites. To the policy-makers, the tool provides the ability to analyze the impacts of future energy technology while balancing competing resource use.

20 FOSSIL-FUELED POWER PLANTS↗

Lifecycle assessment of microalgae to biofuel: Comparison of thermochemical processing pathways

Microalgae are currently being investigated as a renewable transportation fuel feedstock based on various advantages that include high annual yields, utilization of poor quality land, does not compete with food, and can be integrated with various waste streams. This study focuses on directly assessing the impact of two different thermochemical conversion technologies on the microalgae to biofuel process through life cycle assessment. A system boundary of a “well to pump” (WTP) is defined and includes sub-process models of the growth, dewatering, thermochemical bio-oil recovery, bio-oil stabilization, conversion to renewable diesel, and transport to the pump. Models were validated with experimental and literature data and are representative of an industrial-scale microalgae to biofuel process. Two different thermochemical bio-oil conversion systems are modeled and compared on a systems level, hydrothermal liquefaction (HTL) and pyrolysis. The environmental impact of the two pathways were quantified on the metrics of net energy ratio (NER), defined here as energy consumed over energy produced, and greenhouse gas (GHG) emissions. Results for WTP biofuel production through the HTL pathway were determined to be 1.23 for the NER and GHG emissions of -11.4 g CO 2-eq (MJ renewable diesel) -1 . WTP biofuel production through the pyrolysis pathway results in a NER of 2.27 and GHG emissions of 210 g CO2 eq (MJ renewable diesel)-1. The large environmental impact associated with the pyrolysis pathway is attributed to feedstock drying requirements and combustion of co-products to improve system energetics. Discussion focuses on a detailed breakdown of the overall process energetics and GHGs, impact of modeling at laboratory- scale compared to industrial-scale, environmental impact sensitivity to engineering systems input parameters for future focused research and development and a comparison of results to literature.

09 BIOMASS FUELS↗

A comparative energy analysis of three electrochromic glazing technologies in commercial and residential buildings

Here, we present a simulation study of three dynamic electrochromic window glazings, including a novel glazing capable of independently modulating its optical properties in both the visible and near-infrared spectrums. This capability allows this so-called “dual-band” technology to actively manage the solar heat and visible light transmitted into a building's interior, and creates the potential for heating, cooling, and lighting savings vis-à-vis competing window technologies. In this study EnergyPlus is used to simulate annual energy performance of the dual-band electrochromic (DBEC) glazing in three building types and 16 U.S. climate regions. The savings potential of DBEC windows are presented relative to a conventional electrochromic glazing; a visibly transparent, near-infrared switching electrochromic glazings; and several static alternatives, including ASHRAE 90-2010 standard compliant windows. Results indicate that the DBEC glazings are capable of outperforming alternatives in a diverse set of locations and building types, including both heating and cooling-dominated regions. Relative to code-compliant static windows, the DBEC is capable of achieving annual primary energy savings between 6 and 30 kW h/ft 2 of window area from reduced heating, cooling, and lighting demand. Relative to other advanced glazings, the savings are significantly lower, ranging from 0 to 1.2 kW h/ft 2 . Regional DBEC energy cost savings versus high performance static windows are presented to identify early potential market entries based on energy savings. Lastly, the impacts of widespread deployment of high-efficiency LED lighting on DBEC energy savings potentials are also presented.

14 SOLAR ENERGY↗

Techno-economic analysis of hybrid PV/T systems for process heat using electricity to subsidize the cost of heat

Process heat applications make up a large potential market for renewable energy. Despite heating demand being approximately double that of electricity, relatively little work has been done to develop renewable energy for process heat applications. Concentrated solar thermal (CST) systems are capable of reaching temperatures necessary for industrial and commercial steam applications but are often overlooked due to the difficulty of competing with natural gas. Novel hybrid photovoltaic/thermal systems (PV/T) are capable of simultaneously generating electricity and heat. The electricity produced is of higher value and offsets the lifetime cost of the system by producing a cost savings to the facility, ultimately making solar heat competitive with natural gas, propane, coal, and other fuels. The design and economic feasibility of a dish concentrator PV/T (CPV/T) system utilizing a transmissive CPV array is explored through a techno-economic model including technical, financial, and geographical inputs. Through practical design choices, the levelized cost of heat (LCOH) is competitive with natural gas or could even be reduced to zero in some locations by factoring in the electricity savings from additional energy generated by the transmissive CPV module.

14 SOLAR ENERGY↗

Cost comparison of printed circuit heat exchanger to low cost periodic flow regenerator for use as recuperator in a s-CO 2 Brayton cycle

Supercritical Carbon Dioxide (sCO 2 ) power cycles have the potential to deliver high efficiency at low cost. However, in order for an sCO 2 cycle to reach high efficiency, highly effective recuperators are needed. These recuperative heat exchangers must transfer heat at a rate that is substantially larger than the heat transfer to the cycle itself and can therefore represent a significant portion of the power block costs. Regenerators are proposed as a cost saving alternative to high cost printed circuit recuperators for this application. A regenerator is an indirect heat exchanger which periodically stores and releases heat to the working fluid. The simple design of a regenerator can be made more inexpensively compared to current options. The objective of this paper is a detailed evaluation of regenerators as a competing technology for recuperators within an sCO 2 Brayton cycle. The level of the analysis presented here is sufficient to identify issues with the regenerator system in order to direct future work and also to clarify the potential advantage of pursuing this technology. A reduced order model of a regenerator is implemented into a cycle model of an sCO 2 Brayton cycle. An economic analysis investigates the cost savings that is possible by switching from recuperative heat exchangers to switched-bed regenerators. The cost of the regenerators was estimated using the amount of material required if the pressure vessel is sized using ASME Boiler Pressure Vessel Code (BPVC) requirements. The cost of the associated valves is found to be substantial for the regenerator system and is estimated in collaboration with an industrial valve supplier. The result of this analysis suggests that a 21.2% reduction in the contribution to the Levelized Cost of Electricity (LCoE) from the power block can be realized by switching to a regenerator-based system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Impact of ethanol blending into gasoline on aromatic compound evaporation and particle emissions from a gasoline direct injection engine

This study examined the interactions of ethanol with aromatic compounds on aromatic species evolution during gasoline evaporation and the consequent impacts on particle emissions from a single-cylinder, gasoline direct injection engine. From a chemical kinetic standpoint, the dilution of the aromatic species in gasoline by ethanol blending should reduce particle emissions because aromatics are the primary species that form particles during gasoline combustion. However, increased evaporative cooling from the ethanol and ethanol's effect on when aromatics in the fuel droplet (or surface film or pool) evaporate can drive an increase in particle emissions. The objective of this study was to quantify these competing effects. The results show that a combination of ethanol's increased evaporative cooling and impact on aromatic compound vapor-liquid equilibrium can extend droplet lifetime and cause aromatics to evaporate later in the droplet evaporation process than would be the case without ethanol. When fuels were burned in a direct-injection single-cylinder engine at high speed (2500 rpm) and relatively high load, ethanol blending caused an increase in particle emissions for fuels containing a low vapor pressure aromatic. At a lower speed (1500 rpm), no statistically significant increase in particle emissions was observed, likely because more time was available for evaporation and mixing to occur. In contrast, particle emissions from a fuel blended with a high vapor pressure aromatic were either insensitive to or reduced by ethanol blending, likewise to engine operating conditions. Current models for predicting particle emissions from gasoline engines, such as particulate matter index (PMI), generally lack variables for non-linear interactions between ethanol and gasoline hydrocarbons. To identify nonlinear interactions between predictor variables that might better explain the observed particle emissions, the least absolute shrinkage and selection operator (LASSO) regularized regression approach was employed. Among the predictor variables evaluated was the Yield Sooting Index (YSI) which is as an improved measure to quantify the aromatic's chemical tendency to generate particle emissions. Following this analysis, two variables were selected based on their frequent appearance. The first was ethanol mole percent multiplied by aromatic mole percent divided by aromatic vapor pressure [(EtOH * Aro%)/Aro VP@443 K]. The second was aromatic mole percent multiplied by aromatic YSI divided by aromatic molecular weight [(Aro% * Aro YSI)/Aro MW]. The results of linear regression including only these two combined explanatory variables achieved an r 2 = 0.959, substantially improved over the PMI model (r 2 = 0.688) and provides insight into how the PMI formalism might be modified to account for non-linear oxygenate-hydrocarbon coupling.

09 BIOMASS FUELS↗

Replacing liquid fossil fuels and hydrocarbon chemical feedstocks with liquid biofuels from large-scale nuclear biorefineries

Liquid fossil fuels (1) enable transportation and (2) provide energy for mobile work platforms and (3) supply dispatchable energy to highly variable demand (seasonal heating and peak electricity). We describe a system to replace liquid fossil fuels with drop-in biofuels including gasoline, diesel and jet fuel. Because growing biomass removes carbon dioxide from the air, there is no net addition of carbon dioxide to the atmosphere from burning biofuels. In addition, with proper management, biofuel systems can sequester large quantities of carbon as soil organic matter, improving soil fertility and providing other environmental services. In the United States liquid biofuels can potentially replace all liquid fossil fuels. The required system has two key features. First, the heat and hydrogen for conversion of biomass into high-quality liquid fuels is provided by external low-carbon energy sources--nuclear energy or fossil fuels with carbon capture and sequestration. Using external energy inputs can almost double the energy content of the liquid fuel per unit of biomass feedstock by fully converting the carbon in biomass into a hydrocarbon fuel. Second, competing effectively with fossil fuels requires very large biorefineries—the equivalent of a 250,000 barrel per day oil refinery. This requires commercializing methods for converting local biomass into high-density storable feedstocks that can be economically shipped to large-scale biorefineries.

09 - BIOMASS FUELS↗

Customer trust in their utility company and interest in household-level battery storage

Here we seek to contribute to understanding household interest in battery storage, particularly the role of customer trust in their utility company. Using data from a survey of California households, we examine whether customers’ trust in their utility company is associated with their interest in battery storage. We find that customer trust that their utility company acts in their best interest is associated with lower levels of interest. Trust that the utility company is competent has some effect. Perceptions that battery storage has financial and environmental benefits and low nonmonetary costs are also associated with higher levels of interest.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Nth-plant scenario for forest resources and short rotation woody crops: Biorefineries and depots in the contiguous US

Estimating the US potential of woody material is of vital importance to ensure cost-effective supply logistics and develop a sustainable bioenergy and bioproducts industry. We analyzed a mature conversion technology for woody resources for the contiguous US that takes advantage of economies of scale: the nth-plant. Here, we developed a database to quantify the total accessible woody biomass within a distributed network of preprocessing depots and biorefineries considering both quality specifications for conversion and a target cost to compete with fossil fuels. We considered two categories of woody biomass: 1) forest residues from trees, tops and limbs produced from conventional thinning and timber harvesting operations as well as non-timber tree removal; and 2) short rotation woody crops such as poplar, willow, pine, and eucalyptus. A mixed integer linear programming model was developed to analyze scenarios with woody feedstock blends at variable biomass ash contents and cost targets at the biorefinery. When considering a target cost of 85.51 dollars/dry ton (2016$) at the biorefinery, the maximum accessible biomass from forest residues in 2040 remained constant at 106 million dry tons regardless of ash targets. Including short rotation woody crops as part of the blend increased the total accessible biomass to 153 and 195 million dry tons at ash targets of 1% and 1.75%, respectively. We concluded from our analysis that woody resources could address about 55% of EPA’s (Environmental Protection Agency) target of 16 billion gallons of cellulosic biofuel.

09 BIOMASS FUELS↗