Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base Line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

CHANDRA DISCOVERY OF A BINARY ACTIVE GALACTIC NUCLEUS IN Mrk 739

We have discovered a binary active galactic nucleus (AGN) in the galaxy Mrk 739 using Chandra and Swift BAT. We find two luminous (L{sub 2-10 keV} = 1.1 x 10{sup 43} and 1.0 x 10{sup 42} erg s{sup -1}), unresolved nuclei with a projected separation of 3.4 kpc (5.''8 {+-} 0.''1) coincident with two bulge components in the optical image. The western X-ray source (Mrk 739W) is highly variable (x 2.5) during the 4 hr Chandra observation and has a very hard spectrum consistent with an AGN. While the eastern component was already known to be an AGN based on the presence of broad optical recombination lines, Mrk 739W shows no evidence of being an AGN in optical, UV, and radio observations, suggesting the critical importance of high spatial resolution hard X-ray observations (>2 keV) in finding these binary AGNs. A high level of star formation combined with a very low L{sub [O{sub III}]/L{sub 2-10 keV}} ratio cause the AGN to be missed in optical observations. {sup 12}CO observations of the (3-2) and (2-1) lines indicate large amounts of molecular gas in the system that could be driven toward the black holes during the violent galaxy collision and be key to fueling the binary AGN. Mrk 739E has a high Eddington ratio of 0.71 and a small black hole (log M{sub BH} = 7.05 {+-} 0.3) consistent with an efficiently accreting AGN. Other than NGC 6240, this stands as the nearest case of a binary AGN discovered to date.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR ACTIVE GALACTIC NUCLEUS DRIVEN OUTFLOWS IN YOUNG RADIO QUASARS

We present near-infrared spectra of young radio quasars (P{sub 1.4GHz} Almost-Equal-To 26-27 W Hz{sup -1}) selected from the Wide-Field Infrared Survey Explorer. The detected objects have typical redshifts of z Almost-Equal-To 1.6-2.5 and bolometric luminosities {approx}10{sup 47} erg s{sup -1}. Based on the intensity ratios of narrow emission lines, we find that these objects are mainly powered by active galactic nuclei (AGNs), although star formation contribution cannot be completely ruled out. The host galaxies experience moderate levels of extinction, A{sub V} Almost-Equal-To 0-1.3 mag. The observed [O III] {lambda}5007 luminosities and rest-frame J-band magnitudes constrain the black hole masses to lie in the range {approx}10{sup 8.9}-10{sup 9.7} M{sub Sun }. From the empirical correlation between black hole mass and host galaxy mass, we infer stellar masses of {approx}10{sup 11.3}-10{sup 12.2} M{sub Sun }. The [O III] line is exceptionally broad, with FWHM {approx}1300-2100 km s{sup -1}, significantly larger than that of ordinary distant quasars. We argue that these large line widths can be explained by jet-induced outflows, as predicted by theoretical models of AGN feedback.

79 ASTRONOMY AND ASTROPHYSICS↗

A DEEP SEARCH FOR MOLECULAR GAS IN TWO MASSIVE LYMAN BREAK GALAXIES AT z = 3 AND 4: VANISHING CO-EMISSION DUE TO LOW METALLICITY?

We present deep IRAM Plateau de Bure Interferometer observations, searching for CO-emission toward two massive, non-lensed Lyman break galaxies at z = 3.216 and 4.058. With one low significance CO detection (3.5σ) and one sensitive upper limit, we find that the CO lines are ∼>3-4 times weaker than expected based on the relation between IR and CO luminosities followed by similarly massive galaxies at z = 0-2.5. This is consistent with a scenario in which these galaxies have low metallicity, causing an increased CO-to-H{sub 2} conversion factor, i.e., weaker CO-emission for a given molecular (H{sub 2}) mass. The required metallicities at z > 3 are lower than predicted by the fundamental metallicity relation at these redshifts, consistent with independent evidence. Unless our galaxies are atypical in this respect, detecting molecular gas in normal galaxies at z > 3 may thus remain challenging even with ALMA.

79 ASTRONOMY AND ASTROPHYSICS↗

Confident detection of doubly ionized thorium in the extreme Ap star CPD-62° 2717

Despite the Universe containing primordial thorium (Th) of sufficient abundance to appear in stellar spectra, detection of Th has to date been tentative and based on just a few weak and blended lines. Here, we present convincing evidence not only for the first Th detection in a magnetic chemically peculiar Ap star but also for the first detection of Th iii in a stellar spectrum. CPD-62° 2717 was initially recognized as a highly magnetized Ap star due to resolved magnetically split lines captured in H-band spectra from the SDSS/APOGEE survey. The star was subsequently pinpointed as extraordinarily peculiar when careful inspection of the H-band line content revealed the presence of five lines of Th iii, none of which are detected in the other ∼1500 APOGEE-observed Ap stars. Follow-up with the VLT + UVES confirmed a similarly peculiar optical spectrum featuring dozens of Th iii lines, among other peculiarities. Unlike past claims of Th detection, and owing to high-resolution observations of the strong (∼8–12 kG) magnetic field of CPD-62° 2717, the detection of Th iii can in this case be supported by matches between the observed and theoretical magnetic splitting patterns. Comparison of CPD-62° 2717 to stars for which Th overabundances have been previously reported (e.g. Przybylski’s Star) indicates that only for CPD-62° 2717 is the Th detection certain. Along with the focus on Th iii, we use time series measurements of the magnetic field modulus to constrain the rotation period of CPD-62° 2717 to ∼4.8 yr, thus establishing it as a new example of a superslowly rotating Ap star.

79 ASTRONOMY AND ASTROPHYSICS↗

Extraordinary frequency stabilization by resonant nonlinear mode coupling

Here, we show that a self-sustained oscillator with a frequency-selective element operating with two nonlinearly coupled modes can achieve a level of frequency stability well beyond that available using single-mode operation. The system of interest consists of a self-sustained oscillator based on a nonlinear primary mode that is coupled via an internal resonance to a passive secondary mode. Analysis of a generic model for this resonance with both additive and multiplicative noises reveals that the stability improvements accrue from two sources: (i) nonlinear frequency veering in the primary mode, a classical analogue to quantum-level repulsion, that eliminates amplitude-to-frequency noise conversion; and (ii) phase cleaning of the oscillator through an intrinsic phase constraint arising from synchronization of the modes. This latter effect can significantly reduce the effects of intrinsic frequency fluctuations of the primary mode, which are not accessible by any known strategy using single-mode operation. The theoretical predictions are supported by experimental measurements of a microelectromechanical systems-based oscillator that demonstrate a reduction in oscillator line width of several orders of magnitude. This approach offers a means of optimizing frequency stability in self-sustained oscillators, which has direct implications for applications in timekeeping and sensing.

36 MATERIALS SCIENCE↗

Resonant optical spectroscopy and coherent control of C r 4 + spin ensembles in SiC and GaN

Spins bound to point defects are increasingly viewed as an important resource for solid-state implementations of quantum information technologies. In particular, there is a growing interest in the identification of new classes of defect spin that can be controlled optically. Here we demonstrate ensemble optical spin polarization and optically detected magnetic resonance (ODMR) of the S = 1 electronic ground state of chromium (Cr 4+ ) impurities in silicon carbide (SiC) and gallium nitride (GaN). Polarization is made possible by the narrow optical linewidths of these ensembles (< 8.5 GHz), which are similar in magnitude to the ground state zero-field spin splitting energies of the ions at liquid helium temperatures. We therefore are able to optically resolve individual spin sublevels within the ensembles at low magnetic fields using resonant excitation from a cavity-stabilized, narrow-linewidth laser. Additionally, these near-infrared emitters possess exceptionally weak phonon sidebands, ensuring that > 73% of the overall optical emission is contained with the defects’ zero-phonon lines. Lastly, these characteristics make this semiconductor-based, transition metal impurity system a promising target for further study in the ongoing effort to integrate optically active quantum states within common optoelectronic materials.

36 MATERIALS SCIENCE↗

Suppression of bremsstrahlung losses from relativistic plasma with energy cutoff

We study the effects of redistributing superthermal electrons on Bremsstrahlung radiation from hot relativistic plasma. We consider thermal and nonthermal distribution of electrons with an energy cutoff in the phase space and explore the impact of the energy cutoff on Bremsstrahlung losses. We discover that the redistribution of the superthermal electrons into lower energies reduces radiative losses, which is in contrast to nonrelativistic plasma. Lastly, we discuss the possible relevance of our results for open magnetic field line configurations and prospects of the aneutronic fusion based on proton-Boron11 (p-B11) fuel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heat transport in active harmonic chains

We show that a harmonic lattice model with amplifying and attenuating elements, when coupled to two thermal baths, exhibits unique heat transport properties. Some of these novel features include anomalous nonequilibrium steady-state heat currents, negative differential thermal conductance, as well as nonreciprocal heat transport. We find that when these elements are arranged in a PT-symmetric manner, the domain of existence of the nonequilibrium steady state is maximized. We propose an electronic experimental setup based on resistive-inductive-capacitive (RLC) transmission lines, where our predictions can be tested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Droop Control-Based Dispatch of an Islanded Microgrid with Multiple Grid-Forming Sources

Before rotating, fossil fuel-based, synchronous generators (SGs) are phased out, in line with renewable generation goals, grid-forming (GFM) inverters are expected to parallel SGs. Primary droop control allows GFM inverters to share power without communication; however, it is necessary to dispatch GFM inverters and/or SGs with the desired output power for better energy management (e.g., one GFM inverter needs to charge the battery due to a low state of charge). Therefore, this paper develops an analytic approach to dispatching GFM inverters and SGs with the desired output power by shifting the droop intercept up/down while maintaining the same frequency operating point for improved transient stability. This concept is demonstrated through a pure hardware setup with two off-the-shelf inverters and one diesel generator under an islanded microgrid, and we provide insight on the real-world implementation of the proposed concept.

droop control↗

Novel Health Assessment Techniques for a Modern Power Distribution System

Distribution systems are large and complex systems that grow over time. When contingencies occur dispatchers, engineers, and executives need to know the answer to the question, "How bad is it?", in order to make timely and meaningful decisions. Therefore, a scalable method to add context to system conditions is needed. In this paper we present novel deviation-based techniques which enable scaled bus voltage and line power measurement deviations to quickly assess local and global health, and lend context to the severity of contingencies. The proposed techniques are demonstrated using simulations of line-to-line, line-to-ground, and three-phases-to-ground fault conditions on an IEEE 33-bus distribution model.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electromechanical Mode On-line Estimation using Regularized Robust RLS Methods

This paper proposes a regularized robust recursive least squares (R3LS) method for on-line estimation of power-system electromechanical modes based on synchronized phasor measurement unit (PMU) data. The proposed method utilizes an autoregressive moving average exogenous (ARMAX) model to account for typical measurement data, which includes low-level pseudo-random probing, ambient, and ringdown data. A robust objective function is utilized to reduce the negative influence from non-typical data, which include outliers and missing data. A dy-namic regularization method is introduced to help include a priori knowledge about the system and reduce the influence of under-determined problems. Based on a 17-machine simulation model, it is shown through the Monte-Carlo method that the proposed R3LS method can estimate and track electromechanical modes by effectively using combined typical and non-typical measurement data.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Hybrid Modulation Method for Single-Stage Soft-Switching Inverter Based on Series Resonant Converter

Pseudo-dc-link inverters are promising due to the single-stage configuration. The inverters can be isolated by high-frequency transformers, which also provide the freedom of step-up/down through winding turns ratio. Conventionally, a pseudo-dc-link inverter is based upon a pulsewidth modulation converter like flyback converter, but the accompanying switching losses can degrade efficiency and overall system performance. Alternatively, resonant converters (e.g., series resonant converter) seem to fit the need as they typically display soft-switching characteristics. However, the relevant research results are scarce because of two main reasons: high resonant current and limited soft-switching range. To overcome the difficulties, a hybrid modulation method is proposed in this article for a pseudo-dc-link inverter based on series resonant converter. In high-line region, the inverter operates with variable-frequency modulation, which leads to zero-voltage switching and relatively low-resonant current. In low-line region, the inverter operates with a short-pulse density modulation so that switching losses are greatly curtailed without excessive resonant current. The merits in both regions together contribute toward the high efficiency of the inverter. This article presents the operational principle of the proposed modulation as well as a comparison with other modulation methods. In addition, a 400 V-230 Vac, 2-kW prototype was built to verify the proposed modulation and the peak efficiency reaches 98.0%.

42 ENGINEERING↗

Electromechanical Mode Online Estimation using Regularized Robust RLS Methods

This paper proposes a regularized robust recursive least square (R3LS) method for on-line estimation of power-system electromechanical modes based on synchronized phasor measurement unit (PMU) data. The proposed method utilizes an autoregressive moving average exogenous (ARMAX) model to account for typical measurement data, which includes low-level pseudo-random probing, ambient, and ringdown data. A robust objective function is utilized to reduce the negative influence from non-typical data, which include outliers and missing data. A dynamic regularization method is introduced to help include a priori knowledge about the system and reduce the influence of under-determined problems. Based on a 17-machine simulation model, it is shown through the Monte-Carlo method that the proposed R3LS method can estimate and track electromechani-cal modes by effectively using combined typical and non-typical measurement data.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Noninvasive, real-time measurements of plasma parameters via optical emission spectroscopy

Plasma process control applications require acquisition of diagnostic data at a rate faster than the characteristic timescale of perturbations to the plasma. Diagnostics based on optical emission spectroscopy of intense emission lines permit rapid noninvasive measurements with low-resolution ({approx}1 nm), fiber-coupled spectrographs, which are included on many plasma process tools for semiconductor processing. Here the authors report on rapid analysis of Ar emissions with such a system to obtain electron temperatures, electron densities, and metastable densities in argon and argon/mixed-gas (Ar/N{sub 2}, Ar/O{sub 2}, Ar/H{sub 2}) inductively coupled plasmas. Accuracy of the results (compared to measurements made by Langmuir probe and white-light absorption spectroscopy) are typically better than {+-}15% with a time resolution of 0.1 s, which is more than sufficient to capture the transient behavior of many processes, limited only by the time response of the spectrograph used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dual H and D cavity for the PAX target polarimeter

The Spin Filtering tests with antiprotons proposed to the CERN-SPSC by the PAX-collaboration require that the filter target is operated subsequently with polarized hydrogen and deuterium gas. Therefore the target polarime-ter must enable to measure both species. A special resonator with both transverse magnetic rf -components relative to the static B -field for the polarimeter’s rf -transitions has been developed that can be operated on two adjustable frequencies. The design and successful test of the resonator based on two sets of tilted twin-lines is described.

43 PARTICLE ACCELERATORS↗

evaluation of the bioconversion of genetically modified switchgrass using simultaneous saccharification and fermentation ans a consolidated bioprocessing approach

Abstract Background: The inherent recalcitrance of lignocellulosic biomass is one of the major economic hurdles for the production of fuels and chemicals from biomass. Additionally, lignin is recognized as having a negative impact on enzymatic hydrolysis of biomass, and as a result much interest has been placed on modifying the lignin pathway to improve bioconversion of lignocellulosic feedstocks. Results: Previous results showed down-regulation of the caffeic acid 3-O-methyl transferase (COMT) gene in the lignin pathway yielded switchgrass (Panicum virgatum) that was more susceptible to bioconversion after dilute acid pretreatment. Here we examined the response of these plant lines to milder pretreatment conditions with yeast-based SSF, CBP with Clostridium thermocellum, and fermentations with the cellulolytic extreme thermophiles, Caldicellulosiruptor bescii and Caldicellulosiruptor obsidiansis. Unlike the S. cerevisiae SSF conversions, fermentations of pretreated down-regulated COMT transgenic switchgrass with C. thermocellum showed an apparent inhibition of fermentation not observed in the wild-type switchgrass. This inhibition can be eliminated by hot water extraction of the pretreated biomass which resulted in superior conversion yield with transgenic versus wild-type switchgrass for C. thermocellum, also exceeding the yeast-based SSF yield. Further fermentation evaluation of the transgenic switchgrass indicated differential inhibition for the Caldicellulosiruptor strains, which could not be rectified by additional processing conditions. Gas chromatography-mass spectrometry metabolite profiling was used to examine the fermentation broth to elucidate the relative abundance of lignin derived aromatic compounds. The types and abundance of fermentation-derived lignin constituents varied between C. thermocellum and each of the Caldicellulosiruptor strains. Conclusions: The down-regulation of the COMT gene improves the bioconversion of switchgrass relative to the wild-type regardless of the pretreatment condition or fermentation microorganism. However, bacterial fermentations demonstrated strain-dependent sensitivity to the COMT transgenic biomass, likely due to additional soluble lignin pathway-derived constituents resulting from the COMT gene disruption. Removal of these inhibitory constituents permitted completion of fermentation by C. thermocellum, but not by the Caldicellulosiruptor strains. The reason for this difference needs to be explored further.

Caldicellulosiruptor bescii↗

A Unified Data-Driven Approach for Programming In Situ Analysis and Visualization: An Interim Report of Sandia Sub-Team Contributions

As we look ahead to next generation high performance computing platforms, the placement and movement of data is becoming the key-limiting factor on both performance and energy efficiency. Furthermore, the increased quantities of data the systems are capable of generating, in conjunction with the insufficient rate of improvements in the supporting I/0 infrastructure, is forcing applications away from the off-line post-processing of data towards techniques based on in ,situ analysis and visualization. Together, these challenges are shaping how we will both design and develop effective, performant and energy-efficient software. In particular, the challenges highlight the need for data and data-centric operations to be fundamental in the reasoning about, and optimization of, scientific workflows on extreme-scale architectures.

97 MATHEMATICS AND COMPUTING↗

MODAL CLASSIFICATION: Processing and Anomaly Detection in a Noisy Vibrational Environment

n this report we summarize the development of a model-based detection scheme capable of the on-line detection of structural anomalies applying both system identification methods to extract a modal model and state estimation/detection methods to both detect an anomaly and locate all affected sensor positions specified by measurement location. Background information evolving from a simple single input/single output (SISO) mechanical system introducing the state-space formulation which leads directly to a multiple input/multiple output (MIMO) state-space formulation is discussed.From that representation the modal state-space model is introduced through an eigenvalue-eigenvector formulation leading to a similarity transformation and complex modes. Next the sampled-data state-space system is introduced leading to discrete state-space systems which provide the basis for the system identification methods to follow.

42 ENGINEERING↗