Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Evolution of pyramid morphology during InAs(001) homoepitaxy

Growth of InAs(001) homoepitaxial layer has been carried out especially at the bistable region, where the coexistence of both In-stabilized (4x2) and As-stabilized (2x4) surface reconstruction are found to be predominant. The observation of pyramid morphology in this bistable region is reported here. Atomic force microscopy studies have been performed on such pyramids. The heights of the observed pyramids vary from 12 to 26 nm with their bases from 3.6x1.2 to 18x6.3 {mu}m{sup 2}. Formation of such pyramids in the bistable region is attributed to the unique anomalous As-desorption observed during the surface reconstruction.

36 MATERIALS SCIENCE↗

Low frequency noise in InSb/GaAs and InSb/Si channels

The low frequency noise features of InSb grown on GaAs and Si substrates using molecular-beam epitaxy are investigated in the temperature range from 80 to 300 K. In all samples the flicker noise dominates the spectra, with Hooge factors as low as 2x10{sup -5} and 9x10{sup -5} for InSb on GaAs and Si, respectively. The temperature dependence of the Hooge factors is investigated.

36 MATERIALS SCIENCE↗

Low gap amorphous GaN{sub 1-x}As{sub x} alloys grown on glass substrate

Amorphous GaN{sub 1-x}As{sub x} layers with As content in the range of x=0.1 to 0.6 were grown by molecular beam epitaxy on Pyrex glass substrate. These alloys exhibit a wide range of band gap values from 2.2 to 1.3 eV. We found that the density of the amorphous films is {approx}0.8-0.85 of their corresponding crystalline value. These amorphous films have smooth morphology, homogeneous composition, and sharp well defined optical absorption edges. The measured band gap values for the crystalline and amorphous GaN{sub 1-x}As{sub x} alloys are in excellent agreement with the predictions of the band anticrossing model. The high absorption coefficient of {approx}10{sup 5} cm{sup -1} for the amorphous GaN{sub 1-x}As{sub x} films suggests that relatively thin films (on the order of 1 {mu}m) are necessary for photovoltaic application.

36 MATERIALS SCIENCE↗

Epitaxial EuO thin films on GaAs

We demonstrate the epitaxial growth of EuO on GaAs by reactive molecular beam epitaxy. Thin films are grown in an adsorption-controlled regime with the aid of an MgO diffusion barrier. Despite the large lattice mismatch, it is shown that EuO grows well on MgO(001) with excellent magnetic properties. Epitaxy on GaAs is cube-on-cube and longitudinal magneto-optic Kerr effect measurements demonstrate a large Kerr rotation of 0.57 deg., a significant remanent magnetization, and a Curie temperature of 69 K.

36 MATERIALS SCIENCE↗

Congruent evaporation temperature of GaAs(001) controlled by As flux

The congruent evaporation temperature T{sub c} is a fundamental surface characteristic of GaAs and similar compounds. Above T{sub c} the rate of As evaporation exceeds that of Ga during Langmuir (free) evaporation into a vacuum. However, during molecular beam epitaxy (MBE) there is generally an external As flux F incident on the surface. Here we show that this flux directly controls T{sub c}. We introduce a sensitive approach to measure T{sub c} based on Ga droplet stability, and determine the dependence of T{sub c} on F. This dependence is explained by a simple model for evaporation in the presence of external flux. The capability of manipulating T{sub c} via changing F offers a means of controlling congruent evaporation with relevance to MBE, surface preparation methods, and droplet epitaxy.

36 MATERIALS SCIENCE↗

Tuning perpendicular magnetic anisotropy in (Ga,Mn)(As,P) by thermal annealing

We have investigated the effects of postgrowth low temperature annealing on the magnetic, electrical, and structural properties of (Ga{sub 0.94}Mn{sub 0.06})(As{sub 0.9}P{sub 0.1}) layers grown by molecular beam epitaxy. By controlling the annealing time, we are able to tune the magnetic anisotropy between an easy axis in the plane for the as-grown samples, to an easy axis perpendicular to the plane for fully annealed samples. The increase in the carrier density, as a result of annealing, is found to be the primary reason for the sign reversal of the magnetic anisotropy, in qualitative agreement with theoretical predictions.

36 MATERIALS SCIENCE↗

Reduction of native oxides on InAs by atomic layer deposited Al{sub 2}O{sub 3} and HfO{sub 2}

Thin high-{kappa} oxide films on InAs, formed by atomic layer deposition, are the key to achieve high-speed metal-oxide-semiconductor devices. We have studied the native oxide and the interface between InAs and 2 nm thick Al{sub 2}O{sub 3} or HfO{sub 2} layers using synchrotron x-ray photoemission spectroscopy. Both films lead to a strong oxide reduction, obtaining less than 10% of the native As-oxides and between 10% and 50% of the native In-oxides, depending on the deposition temperature. The ratio of native In- to As-oxides is determined to be 2:1. The exact composition and the influence of different oxidation states and suboxides is discussed in detail.

36 MATERIALS SCIENCE↗

Tensile strained island growth at step-edges on GaAs(110)

We report the growth of tensile strained GaP islands on a GaAs(110) surface. Three-dimensional island formation proceeds via a step-edge nucleation process. To explain the dislocation-free nature of these islands, we consider the kinetics of strain relief within the context of a model for dislocation glide as a function of surface orientation and sign of strain.

36 MATERIALS SCIENCE↗

Heteroepitaxy of single-crystal LaLuO{sub 3} on GaAs(111)A by atomic layer deposition

We demonstrate that LaLuO{sub 3} films can be grown epitaxially on sulfur-passivated GaAs(111)A substrates by atomic layer deposition (ALD). Transmission electron microscopy and x-ray diffraction analyses reveal that the oxide film exhibits a cubic structure with a lattice mismatch of -3.8% relative to GaAs. The epitaxial layer has a high degree of crystalline perfection and is relaxed. Electrical characterizations performed on this structure show interfaces with a low interface state density of {approx}7x10{sup 11} cm{sup -2} eV{sup -1}. The measured dielectric constant is around 30, which is close to its bulk crystalline value. In contrast, ALD LaLuO{sub 3} is polycrystalline on GaAs(100) and amorphous on Si(111).

36 MATERIALS SCIENCE↗

Evolution Of Surface Topography On GaAs(100) And GaAs(111) At Normal And Oblique Incidence Of Ar{sup +}-Ions

Nanoscale surface structures emerging from medium energy (50-60 keV)Ar{sup +}-ion sputtering of p-type GaAs(100) and semi-insulating GaAs(111) substrates have been investigated. For normally incident 50 keV Ar{sup +}-ions of fluence 1x10{sup 17} ions/cm{sup 2} on GaAs(100) and GaAs(111) features in the form of nanoscale pits/holes without short range ordering are observed with densities 5.2x10{sup 9} /cm{sup 2} and 5.9x10{sup 9} /cm{sup 2}, respectively along with irregularly shaped patches of islands. For GaAs(111) on increasing the influence to 5x10{sup 17} /cm{sup 2} the pit density increases marginally to 6.2x10{sup 9} /cm{sup 2}. For 60 deg. off-normal incidence of 60 keV Ar.{sup +}-ions of fluence 2x10{sup 17} ions/cm{sup 2} on GaAs(100) microscale wavelike surface topography is observed. In all cases well-defined nanodots are absent on the surface.

36 MATERIALS SCIENCE↗

Structural and resistance switching properties of ZnO/SrTiO{sub 3}/GaAs heterostructure grown by laser molecular beam epitaxy

ZnO thin films were epitaxially grown on (001) GaAs substrate by laser molecular beam epitaxy with SrTiO{sub 3} (STO) as a buffer layer. The interface properties of ZnO/GaAs heterostructure are greatly improved by inserting STO buffer layer. The interfacial effects on the transport and dielectric characteristics of the heterostructure have been investigated. The current-voltage characteristic of the heterostructure reveals an asymmetric and resistance switching behavior, exhibiting a temperature-dependent resistance hysteresis in the temperature range of 50-300 K. These measured properties could be attributed to the charge effect at the interface of the heterostructure.

36 MATERIALS SCIENCE↗

Terahertz generation and power limits in In{sub 0.53}Ga{sub 0.47}As photomixer coupled to transverse-electromagnetic-horn antenna driven at 1.55 {mu}m wavelengths

We report continuous wave generation at frequencies up to 2 THz using ion-irradiated In{sub 0.53}Ga{sub 0.47}As photomixers coupled to transverse-electromagnetic-horn antennae driven at {approx}1.55 {mu}m wavelength. Output powers up to 0.1 {mu}W at 700 GHz have been achieved. The dependence of the output power on incident optical power and the bias voltage is analyzed in the both regimes of Ohmic transport and recombination-limited transport. The fundamental limitations of the performance of the photomixer devices based on photoconductive phenomenon in recombination-limited transport are analyzed.

36 MATERIALS SCIENCE↗

Structural and optical properties of dilute InAsN grown by molecular beam epitaxy

We perform a structural and optical characterization of InAs{sub 1-x}N{sub x} epilayers grown by molecular beam epitaxy on InAs substrates (x < or approx. 2.2%). High-resolution x-ray diffraction (HRXRD) is used to obtain information about the crystal quality and the strain state of the samples and to determine the N content of the films. The composition of two of the samples investigated is also obtained with time-of-flight secondary ion mass spectroscopy (ToF-SIMS) measurements. The combined analysis of the HRXRD and ToF-SIMS data suggests that the lattice parameter of InAsN might significantly deviate from Vegard's law. Raman scattering and far-infrared reflectivity measurements have been carried out to investigate the incorporation of N into the InAsN alloy. N-related local vibrational modes are detected in the samples with higher N content. The origin of the observed features is discussed. We study the compositional dependence of the room-temperature band gap energy of the InAsN alloy. For this purpose, photoluminescence and optical absorption measurements are presented. The results are analyzed in terms of the band-anticrossing (BAC) model. We find that the room-temperature coupling parameter for InAsN within the BAC model is C{sub NM}=2.0{+-}0.1 eV.

36 MATERIALS SCIENCE↗

Piezoelectric InAs (211)B quantum dots grown by molecular beam epitaxy: Structural and optical properties

The structural and optical properties of piezoelectric (211)B InAs nanostructures grown by molecular beam epitaxy are systematically investigated as a function of the various growth parameters. Depending on the specific growth conditions, we show that the InAs nanostructures take the form of a quantum dot (QD) or a quantum dash, their height ranges between 2 and 20 nm, and their density varies from a few times 10{sup 8} cm{sup -2} all the way up to a few times 10{sup 10} cm{sup -2}. The (211)B QDs are characterized by large aspect ratios, which are compatible with a truncated pyramid morphology. By analyzing the QD emission spectrum, we conclude that only small size QDs, with heights less than 3 nm, are optically active. This is consistent with high resolution transmission electron microscopy observations showing that large QDs contain misfit dislocations, whereas small QDs are dislocation-free. The formation of a two-dimensional wetting layer is observed optically, and its thickness is determined to be between 0.30 and 0.39 nm. Finally, the large blueshift in the QD emission observed with increasing excitation power represents a clear evidence of the strong built-in piezoelectric field present in these dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic ellipsometric analysis of ZnSe{sub 1-x}O{sub x} layers with different O compositions

In this study, ZnSe{sub 1-x}O{sub x} layers with oxygen contents of up to 7.0% are successfully grown at 300 deg. C on semi-insulating GaAs substrates by molecular beam epitaxy. The deposited ZnSe{sub 1-x}O{sub x} films are characterized by Raman spectroscopy and the optical properties studied by spectroscopic ellipsometry. We examine the complex dielectric function obtained by spectroscopic ellipsometry in the photon range from 1.5 to 5 eV. The shifting and broadening of the critical points in the ZnSe{sub 1-x}O{sub x} epilayers as a function of the O composition are investigated for the first time. The characteristics of the peaks change as the O composition increases. The second derivative of the dielectric function is presented and analyzed. The dielectric function spectra reveal distinct structures which can be attributed to the band gap and optical transitions at higher energy.

36 MATERIALS SCIENCE↗

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Zinc-blende (Cubic) GaN and AlGaN Layers, Structures and Bulk Crystals by Molecular Beam Epitaxy

We have studied the growth of zinc-blende GaN and AlGaN layers, structures and bulk crystals by molecular beam epitaxy (MBE). We have developed a process for growth by MBE of free-standing cubic GaN layers. Undoped thick cubic GaN films were grown on semi-insulating GaAs (001) substrates by a modified plasma-assisted molecular beam epitaxy (PA-MBE) method and were removed from the GaAs substrate after the growth. The resulting free-standing GaN wafers with thicknesses in the 30-100 {mu}m range may be used as substrates for further epitaxy of cubic GaN-based structures and devices. We have developed procedures to cleave the wafers into 10x10 mm{sup 2} square substrates and to polish them to produce epi-ready surfaces. The first GaN/InGaN LEDs on our zinc-blende GaN substrates have been demonstrated by our collaborators at Sharp Laboratories of Europe.

36 MATERIALS SCIENCE↗

Density Functional Theory of Structural and Electronic Properties of III-N Semiconductors

In this wok, we present the density functional theory (DFT) calculations of cubic III-N based semiconductors by using the full potential linear augmented plane-wave method plus local orbitals as implemented in the WIEN2k code. Our aim is to predict the pressure effect on structural and electronic properties of III-N binaries and ternaries. Results are given for structural properties (e.g., lattice constant, elastic constants, bulk modulus, and its pressure derivative) and electronic properties (e.g., band structure, density of states, band gaps and band widths) of GaAs, GaN, AlN, and InN binaries and GaAsN ternaries. The proposed model uses GGA exchange-correlation potential to determine band gaps of semiconductors at {Gamma}, L and X high symmetry points of Brillouin zone. The results are found in good agreement with available experimental data for structural and electronic properties of these semiconductors.

36 MATERIALS SCIENCE↗