Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Promoting the Furan Ring‐Opening Reaction to Access New Donor–Acceptor Stenhouse Adducts with Hexafluoroisopropanol

Abstract Donor–acceptor Stenhouse adducts (DASAs) are visible‐light‐responsive photoswitches with a variety of emerging applications in photoresponsive materials. Their two‐step modular synthesis, centered on the nucleophilic ring opening of an activated furan, makes DASAs readily accessible. However, the use of less reactive donors or acceptors renders the process slow and low yielding, which has limited their development. We demonstrate here that 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) promotes the ring‐opening reaction and stabilizes the open isomer, allowing greatly reduced reaction times and increased yields for known derivatives. In addition, it provides access to previously unattainable DASA‐based photoswitches and DASA–polymer conjugates. The role of HFIP and the photochromic properties of a set of new DASAs is probed using a combination of 1 H NMR and UV/Vis spectroscopy. The use of sterically hindered, electron‐poor amines enabled the dark equilibrium to be decoupled from closed‐isomer half‐lives for the first time.

Clerc, Michèle↗
DOE OSTI2021

Copper‐Catalyzed Dehydrogenative Amidation of Light Alkanes

Abstract The functionalization of C−H bonds in light alkanes, particularly to form C−N bonds, remains a challenge. We report the dehydrogenative coupling of amides with C1–C4 hydrocarbons to form N‐alkyl amide products with tBuOOtBu as oxidant, and a copper complex of a phenanthroline‐type ligand as catalyst. The reactions occurred in good yields in benzene or supercritical carbon dioxide as solvents. This strategy allowed for the determination of the relative reactivity of these alkane C−H bonds toward this amination process and showed, in contrast to prior work with larger alkanes, that the reactivity correlated with bond dissociation energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Preparation of Potassium Acyltrifluoroborates (KATs) from Carboxylic Acids by Copper-Catalyzed Borylation of Mixed Anhydrides**

Here we report the preparation of potassium acyltrifluoroborates (KATs) from widely available carboxylic acids. Mixed anhydrides of carboxylic acids were prepared using isobutyl chloroformate and transformed to the corresponding KATs using a commercial copper catalyst, B 2 (pin) 2 , and aqueous KHF 2 . This method allows for the facile preparation of aliphatic, aromatic, and amino acid-derived KATs and is compatible with a variety of functional groups including alkenes, esters, halides, nitriles, and protected amines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nitrogen Atom Transfer Catalysis by Metallonitrene C−H Insertion: Photocatalytic Amidation of Aldehydes

Abstract C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd II . Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N 3 SiMe 3 . Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation–Resistant Cyclodextrin–Based Metal–Organic Frameworks

Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine-based sorbents—the current leading technology—is poor stability towards O 2 . Here, we demonstrate that CO 2 chemisorption in γ-cylodextrin-based metal-organic frameworks (CD-MOFs) occurs via HCO 3 – formation at nucleophilic OH – sites within the framework pores, rather than via previously proposed pathways. Here, the new framework KHCO 3 CD-MOF possesses rapid and high-capacity CO 2 uptake, good thermal, oxidative, and cycling stabilities, and selective CO 2 capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO 3 CD-MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH – sites within a porous framework represents a potentially general strategy for the design of oxidation-resistant adsorbents for CO 2 capture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal–Organic Frameworks

We report reversible high capacity adsorption of SO 2 in robust Zr-based metal–organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Self-Assembly of Helical Nanofibrous Chiral Covalent Organic Frameworks

Despite significant progress on the design and synthesis of covalent organic frameworks (COFs), precise control over microstructures of such materials remains challenging. Herein, two chiral COFs with well-defined one-handed double-helical nanofibrous morphologies were constructed via an unprecedented template-free method, capitalizing on the diastereoselective formation of aminal linkages. Detailed time-dependent experiments reveal the spontaneous transformation of initial rod-like aggregates into the double-helical microstructures. Impoirtantly, we have further demonstrated that the helical chirality and circular dichroism signal can be facilely inversed by simply adjusting the amount of acetic acid during synthesis. Moreover, by transferring chirality to achiral fluorescent molecular adsorbents, the helical COF nanostructures can effectively induce circularly polarized luminescence with the highest luminescent asymmetric factor (g lum ) up to ≈0.01.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synergizing Electron and Heat Flows in Photocatalyst for Direct Conversion of Captured CO 2

We report a ternary hybrid photocatalyst architecture with tailored interfaces that boost the utilization of solar energy for photochemical CO 2 reduction by synergizing electron and heat flows in the photocatalyst. The photocatalyst comprises cobalt phthalocyanine (CoPc) molecules assembled on multiwalled carbon nanotubes (CNTs) that are decorated with nearly monodispersed cadmium sulfide quantum dots (CdS QDs). The CdS QDs absorb visible light and generate electron-hole pairs. The CNTs rapidly transfer the photogenerated electrons from CdS to CoPc. The CoPc molecules then selectively reduce CO 2 to CO. Here, the interfacial dynamics and catalytic behavior are clearly revealed by time-resolved and in situ vibrational spectroscopies. In addition to serving as electron highways, the black body property of the CNT component can create local photothermal heating to activate amine-captured CO 2 , namely carbamates, for direct photochemical conversion without additional energy input.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rewritable Surface‐Grafted Polymer Brushes with Dynamic Covalent Linkages

Abstract Surface grafting of polymer brushes drastically modifies surface properties, including wettability, compatibility, responsiveness, etc. A broad variety of functionalities can be introduced to the surface via different types of polymers. Bringing together properties of two or more types of polymer brushes to one surface opens up even more possibilities in brush‐modified materials. However, while it is generally feasible to introduce several chemical compositions along the brushes via copolymerization, it is challenging to vary the types of polymer brushes along a surface. Although previous studies have demonstrated binary brushes via orthogonal polymerization techniques or partial deactivation/regrafting, they commonly limit the number of polymer types to two. Here, we propose a strategy to introduce dynamic covalent diketoenamine linkages at the root of polymer brushes. The grafting density could be precisely tuned during surface functionalization. The surface‐anchored polymer brushes were cleaved by the addition of small molecule amines. New polymer brushes can be regrafted from the surface following refunctionalization of exposed sites. The maneuverability allows tuning of the types and densities of the polymer brushes, pointing the way to the preparation of a new generation of well‐defined brush‐modified materials with mixed grafts, with potential applications in the design of smart materials and surfaces.

Cui, Feichen↗
DOE OSTI2016

Thin film initiation of cracks for fracture toughness measurements in epoxy resins

ABSTRACT The first step in accurately measuring the fracture toughness of a polymeric material is to generate a sharp crack in the sample. Often this is accomplished by tapping a razor blade into the sample, allowing a natural crack to grow; however, it can be difficult to control the crack propagation. Alternate methods for initial crack generation are investigated, including scoring the sample with a razor blade and inserting thin films or foils into the samples during cure. Fluoropolymer films and aluminum and stainless steel foils of various thicknesses are examined in a number of epoxy‐amine resins with a range of toughness and glass transition values. None of the alternative methods replicate the results of starting with a natural crack. Furthermore, it is difficult to form satisfactory test samples using fluoropolymer films. For relative toughness comparisons, either the scoring method or thin, ≤25.4 μm, foils can be used to initiate cracks with similar results. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 44364.

McAninch, Ian M.↗
DOE OSTI2023

Experimental and modeling studies of IPDI-based polyurea elastomers – The role of hard segment fraction

Segmented polyureas (PUa) are industrially important class of polymers widely used in coatings, sealant, and adhesive applications. Here, in this paper, we report synthesis, characterization, and modeling of Isophorone Diisocyanate-Diethyl-Toluene-Diamine-Polyether amine (IPDI-DETDA-PO PUa) with varied hard segment contents of 20, 30, and 40 weight percent. For each of the three materials, we study its structure and phase behavior using FTIR, DSC, and TEM, and clearly show the presence of microphase separation between the hard and soft nanodomains. We then measure the linear viscoelastic response of the PUa-s using DMA (frequency sweeps at multiple temperatures). The DMA data are shown to obey the time-temperature superposition. Finally, we develop a new micromechanical model describing the DMA results; the model describes a phase-separated PUa as two “Fractional-order Maxwell gels” branches, connected in parallel, with the first FMG branch representing the “percolated hard phase" and the second one modeling the “filled soft phase". In agreement with the earlier thermodynamic theories, the volume-fraction of the percolated hard phase is related to the hard segment weight-fraction (HSWF), defined as the combined mass of IPDI and DETDA normalized to the total mass of the polymer. The data and model are found to be in a good qualitative and quantitative agreement.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental and theoretical rationalization for the base pairing abilities of inosine, guanosine, adenosine, and their corresponding 8-oxo -7,8-dihydropurine, and 8-bromopurine analogues within A-form duplexes of RNA

Inosine is an important RNA modification, furthermore RNA oxidation has gained interest due, in part, to its potential role in the development/progression of disease as well as on its impact on RNA structure and function. In this report we established the base pairing abilities of purine nucleobases G, I, A, as well as their corresponding, 8-oxo-7,8-dihydropurine (common products of oxidation at the C8-position of purines), and 8-bromopurine (as probes to explore conformational changes), derivatives, namely 8-oxoG, 8-oxoI, 8-oxoA, 8-BrG, and 8-BrI. Dodecamers of RNA were obtained using standard phosphoramidite chemistry via solid-phase synthesis, and used as models to establish the impact that each of these nucleobases have on the thermal stability of duplexes, when base pairing to canonical and noncanonical nucleobases. Thermal stabilities were obtained from thermal denaturation transition (Tm) measurements, via circular dichroism (CD). The results were then rationalized using models of base pairs between two monomers, via density functional theory (DFT), that allowed us to better understand potential contributions from H-bonding patterns arising from distinct conformations. Overall, some of the important results indicate that: (a) an anti-I:syn-A base pair provides thermal stability, due to the absence of the exocyclic amine; (b) 8-oxoG base pairs like U, and does not induce destabilization within the duplex when compared to the pyrimidine ring; (c) a U:G wobble-pair is only stabilized by G; and (d) 8-oxoA displays an inherited base pairing promiscuity in this sequence context. Gaining a better understanding of how this oxidatively generated lesions potentially base pair with other nucleobases will be useful to predict various biological outcomes, as well as in the design of biomaterials and/or nucleotide derivatives with biological potential.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

On the Limited Role of Electronic Support Effects in Selective Alkyne Hydrogenation: A Kinetic Study of Au/MO x Catalysts Prepared from Oleylamine‐Capped Colloidal Nanoparticles

Abstract We report a quantitative kinetic evaluation and study of support effects for partial alkyne hydrogenation using oleylamine‐capped Au colloids as catalyst precursors. The amine capping agents can be removed under reducing conditions, generating supported Au nanoparticles of ∼2.5 nm in diameter. The catalysts showed high alkene selectivity (>90 %) at all conversions during alkyne partial hydrogenation. Catalytic activity, observed rate constants, and apparent activation energies (25–40 kJ/mol) were similar for all Au catalysts, indicating support effects are relatively small. Alkyne adsorption, probed with FTIR and DFT, showed adsorption on the support was associated with hydrogen‐bonding interactions. DFT calculations indicate strong alkyne adsorption on Au sites, with the strongest adsorption sites at the metal‐support interface (MSI). The catalysts had similar hydrogen reaction orders (0.7–0.9), and 1‐octyne reaction orders (∼−0.2), suggesting a common mechanism. The reaction kinetics are most consistent with a mechanism involving the non‐competitive activated adsorption of H 2 on an alkyne‐covered Au surface.

Bruno, James E.↗
DOE OSTI2020

Additive-Free Formic Acid Dehydrogenation Using a Pincer- Supported Iron Catalyst

The iron complex ( iPr PN Me P)Fe(H) 2 (CO) ( iPr PN Me P = CH 3 N(CH 2 CH 2 P i Pr 2 ) 2 ), which features a pincer ligand with a tertiary amine, can give up to 100,000 turnovers for additive-free formic acid dehydrogenation (FADH). This is two orders of magnitude higher than any previously reported base metal system. Furthermore, mechanistic studies reveal the catalytic reaction pathway and provide guidance for the development of improved catalytic systems for additive-free FADH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sub‐5 nm Intermetallic Nanoparticles Confined in Mesoporous Silica Wells for Selective Hydrogenation of Acetylene to Ethylene

Abstract We report the synthesis and catalytic application of intermetallic PtSn nanoparticles confined in MSWs (Mesoporous Silica Wells) in the semi‐hydrogenation of acetylene. Platinum nanoparticles with a size of 2.9 nm supported on amine‐functionalized ∼180 nm silica spheres were enmeshed in a mesoporous silica shell. After the addition of tin via a polyol synthesis method, we obtained the final PtSn x @MSW (x=0.30, 0.50, 0.70, 1.0 and 2.0). Owing to the mesoporous encapsulation the sub‐5 nm bimetallic particles are shown to be monodisperse and well protected against aggregation on the silica sphere even under high‐temperature treatment conditions. In the gas phase semi‐hydrogenation of acetylene, the PtSn@MSW with Sn/Pt molar ratios equal to or greater than one displayed higher selectivity to ethylene. Meanwhile, increasing Sn content decreases acetylene conversion. The intermetallic PtSn@MSW catalysts also displayed long‐term stability and regenerability due to the confined environment provided by MSW.

Maligal‐Ganesh, Raghu V.↗
DOE OSTI2026

Hydrotreatment of Nylon 66 and Amide Model Compounds Over Sulfided NiMo Catalysts

Molybdenum sulfide-based catalysts, such as nickel–molybdenum on alumina (NiMoS x /Al 2 O 3 ), are widely used in hydrotreating and have potential for catalyzing waste plastic conversion via hydrogenolysis, yet their performance, such as reaction kinetics and network, for amide-rich polymer feeds is poorly defined. Here we combine Nylon 66 with the amide model compound, N,N-dibutylhexanediamide (DBDAD), to quantify hydrodeoxygenation (HDO) and hydrodenitrogenation (HDN) chemistry in a stirred batch reactor (53 bar H 2 , 280–320°C). DBDAD conversion is near-linear with time, indicating strong adsorption of the substrates on the active sites. Time-resolved product identification indicates parallel C─O first-cleavagedeoxygenation (DO) and C─N first-cleavagedenitrogenation (DN) sequences proceeding through amine and diol intermediates, respectively, to C 4 ─C 6 alkanes. Increasing temperature shifts selectivity toward DN, decreasing the initial r(DO)/r(DN) from 1.38 (280°C) to 0.69 (320°C), with an apparent activation energy of 173 kJ mol −1 for DBDAD conversion. At 300°C, nylon 66 converts faster than DBDAD, producing a complex mixture of oxygen- and nitrogen-containing species and an initial rate ratio r(DO)/r(DN) of 1.6. No heteroaromatic nitrogen products are detected by the method used. These results provide reaction pathways and product signatures relevant to hydro-processing catalysts exposed to polyamide-derived streams.

Nylon 66↗
DOE OSTI2015

Combined Spectroscopic and Electrochemical Detection of a NiI•••H–N Bonding Interaction with Relevance to Electrocatalytic H2 Production

The [Ni(PR2NR’2)2]2+ family of complexes are exceptionally active catalysts for proton reduction to H2. In this manuscript, we explore the first protonation step of the proposed catalytic cycle by using a catalytically inactive NiI complex possessing a sterically demanding variation of the ligand. Due to the paramagnetic nature of the NiI oxidation state, the protonated NiI intermediate has been characterized through a combination of cyclic voltammetry, ENDOR, and HYSCORE spectroscopy. Both the electrochemical and spectroscopic studies indicate that the NiI complex is protonated at a pendant amine that is endo to Ni, which suggests the presence of an intramolecular NiI•••HN bonding interaction. Using density functional theory, the proton was found to hydrogen bond to three doubly-occupied, localized molecular orbitals: the 3dxz, 3dz2, and 3dyz orbitals of nickel. These studies provide the first direct experimental evidence for this critical catalytic intermediate, and implications for catalytic H2 production are discussed. Research was supported by the Max Planck Society (EPR, ENDOR, and HYSCORE spectroscopy, computational studies), and as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (electrochemistry, NMR spectroscopy). Pacific Northwest National Laboratory is operated by Battelle for DOE.

electrocatalysis↗