Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADAPTIVE SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Influence of the least-squares phase on optical vortices in strongly scintillated beams

The optical vortices that exist in strongly scintillated beams make it difficult for conventional adaptive optics systems to remove the phase distortions. When the least-squares reconstructed phase is removed, the vortices still remain. However, we found that the removal of the least-squares phase induces a portion of the vortices to be annihilated during subsequent propagation, causing a reduction in the total number of vortices. This can be understood in terms of the restoration of equilibrium between explicit vortices, which are visible in the phase function, and vortex bound states, which are somehow encoded in the continuous phase fluctuations. Numerical simulations are provided to show that the total number of optical vortices in a strongly scintillated beam can be reduced significantly after a few steps of least-squares phase corrections.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Projection phase contrast microscopy with a hard x-ray nanofocused beam: Defocus and contrast transfer

We report a projection phase contrast microscopy experiment using hard x-ray pink beam undulator radiation focused by an adaptive mirror system to 100-200 nm spot size. This source is used to illuminate a lithographic test pattern with a well-controlled range of spatial frequencies. The oscillatory nature of the contrast transfer function with source-to-sample distance in this holographic imaging scheme is quantified and the validity of the weak phase object approximation is confirmed for the experimental conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimentation in Exploring Photovoltaic Inverter Dynamics Under Different Irradiance Levels Through a Data-Driven Approach

As conventional direct connections of synchronous generators are being phased out, inverter-based resources (IBRs) with grid support functions are increasingly being integrated into power systems. This transition requires the development of accurate dynamic models for IBRs to predict how power systems will adapt to varying levels of IBRs penetration, establish grid code requirements, and ensure compliance. Here, this study introduces an active probing signal-based data-driven modeling technique to accurately derive the dynamics model of a smart photovoltaic inverter operating in Volt-Watt and Freq-Watt modes, in compliance with the IEEE 1547–2018 standard. The paper focuses on investigating how the dynamics of the PV inverter model respond to fluctuations in solar irradiance, utilizing real-time digital simulator experimentation. The experimental analysis demonstrates that the amplitude of dynamics fluctuates with changes in irradiance across both operational modes and confirms the active power’s dependence on irradiance levels. Furthermore, the nature of inverter dynamics varies distinctly between the different modes of activation. Critically, our findings indicate that dynamic models require DC-gain adjustments to accommodate contrasting irradiance levels, highlighting a negative gradient linear relationship between the DC-gain of each model and the irradiance.

14 SOLAR ENERGY↗

Device Feasibility Analysis of Multi-level FeFETs for Neuromorphic Computing

As an emerging non-volatile memory device technology, Ferroelectric Field-Effect Transistors (FeFETs) can enable low-power, adaptive intelligent system design. However, device dimension and operating voltage dependent reliability issues of scaled FeFETs can ultimately lead to degraded performance in solving machine learning tasks. In this article, detailed experimental characterization of FeFET devices of different dimensions have been carried out to explicitly evaluate the non-ideal behavior in device conductance programming properties like number of programming states, cycle-to-cycle (C2C) variations, device-to-device (D2D) variations, and state retention. A hardware-aware software simulation approach has been adopted to capture the adversarial effects of the non-idealities on recognition accuracy through algorithm-level performance assessment by including them in NeuroSim, a popular neural network hardware simulator, to execute a neural network model considering all other hardware constraints. With the added non-idealities, significant accuracy degradation has been observed compared to the ideal scenarios where D2D variations play the most critical role. Thereafter, feasibility of a variation-aware training method has been evaluated to tackle the accuracy drop.

42 ENGINEERING↗

A View from ORNL: Scientific Data Research Opportunities in the Big Data Age

One of the core issues across computer and computational science today is adapting to, managing, and learning from the influx of "Big Data". In the commercial space, this problem has led to a huge investment in new technologies and capabilities that are well adapted to dealing with the sorts of human-generated logs, videos, texts, and other large-data artifacts that are processed and resulted in an explosion of useful platforms and languages (Hadoop, Spark, Pandas, etc.). However, translating this work from the enterprise space to the computational science and HPC community has proven somewhat difficult, in part because of some of the fundamental differences in type and scale of data and timescales surrounding its generation and use. We describe a forward-looking research and development plan which centers around the concept of making Input/Output (I/O) intelligent for users in the scientific community, whether they are accessing scalable storage or performing in situ workflow tasks. Much of our work is based on our experience with the Adaptable I/O System (ADIOS 1.X), and our next generation version of the software ADIOS 2.X [1].

Klasky, Scott↗

Framework for Supporting Adaptive Droop Based Power Electronic Systems

The electric grid is evolving into an electrical network composed of power electronic converters interconnected with renewable and energy storage technologies. This requires the adoption of more advanced control such as volt/var regulation, fast frequency control, and active power frequency response. This work presents a communication and control framework to support dynamically changing droop control segments that can be used for different optimization schemes. Results are presented to work in a controller hardware in the loop testbed.

Starke, Michael↗

Aggregated DER_A Model Parameterization via Online Moving Horizon Estimation

Here, this paper introduces a methodology for parameterizing the DER_A model using a novel smooth mathematical representation, simplifying the process and preserving accuracy in modeling inverter-based generator (IBG). The methodology employs an online parameterization process that can operate in real-time. The model parameterization process is structured into five sequential steps, each targeting a specific aspect of the DER_A model through moving horizon estimation. This approach adapts to systems with varying voltage and frequency support requirements by selectively applying each step. Simulation results on systems with both known and unknown parameters validate the methodology’s effectiveness. The online moving horizon estimation technique accurately captures the dynamics of the overall system and ensures that the parameterized DER_A model closely mirrors the real system’s voltage, current, and power dynamics. The findings highlight the potential of this methodology to substantially improve and simplify the dynamic modeling of power systems, paving the way for more reliable and robust IBG and grid integration.

42 ENGINEERING↗

Local adaptation of both plant and pathogen: an arms‐race compromise in switchgrass rust

In coevolving species, parasites locally adapt to host populations as hosts locally adapt to resist parasites. Parasites often outpace host local adaptation since they have rapid life cycles, but host diversity, the strength of selection, and external environmental influence can result in complex outcomes. To better understand local adaptation in host–parasite systems, we examined locally adapted switchgrass (Panicum virgatum), and its leaf rust pathogen (Puccinia novopanici) across a latitudinal range in North America. We grew switchgrass genotypes in 10 replicated multiyear common gardens, measuring rust severity from natural infection in a ‘host reciprocal transplant’ framework for testing local adaptation. We conducted genome-wide association mapping to identify genetic loci associated with rust severity. Genetically differentiated rust populations were locally adapted to northern and southern switchgrass, despite host local adaptation to environmental conditions in the same regions. Rust resistance was polygenic, and distinct loci were associated with rust severity in the north and south. We narrowed a previously identified large-effect quantitative trait locus for rust severity to a candidate YELLOW STRIPE-LIKE gene and linked numerous other loci to defense-related genes. Overall, our results suggest that both hosts and parasites can be simultaneously locally adapted, especially when parasites impose less selection than other environmental factors.

59 BASIC BIOLOGICAL SCIENCES↗

Smart Adaptive Structures for an Ocean Wave Energy Converter

Ocean wave energy converters face significant challenges including cost-effectiveness, minimizing maintenance requirements, and withstanding extreme conditions. However, by utilizing smart materials, these converters could overcome these challenges. Such energy harvesters could use dielectric elastomer generators to convert ocean wave energy into electricity through their dynamic straining. Conversely, by applying electricity to these generators, they become actuators - dielectric elastomer actuators - thereby enabling them to alter their stiffness and adapt to the ever-changing ocean energy environments. Such active adaptation could enhance the converter's ability to: reach resonance with ocean waves and protect itself from dangerous waves. This study utilizes numerical analyses through the COMSOL software framework to evaluate the potential energy that could be harvested by a conceptual ocean wave energy converter based upon dielectric elastomer generators/actuators. The converter is composed of an external hull (that is a hollow cylinder), an inertial mass (that is a hollow cylinder and concentric with the hull), and 'spokes' - made of dielectric elastomer generators/actuators - that connect the hull to the inertial mass. Results of the numerical analyses include those outcomes arising from the conceptual converter being simulated via a sinusoidal motion analogous to ocean waves. That motion, therefore, causes relative motion between the converter's hull and inertial mass thereby dynamically stretching the corresponding connecting elastomers. The stretching of the elastomers enables them to 'gain elastic strain energy' and is, therefore, considered to be the theoretical limit of possible electrical energy conversion for the dielectric elastomer generator/actuator spokes. Additionally, the elastomer material properties of the spokes were altered to simulate the actuation of those same elastomers; with overall strain energy being subsequently investigated. Ultimately this is a preliminary study exploring the ability of such smart materials - electricity-generating and self-actuating elastomers - to actively adapt an ocean wave energy converter's structure to address and overcome the aforementioned challenges.

active materials↗

Dedicated short range communications used as fail-safe in autonomous navigation

Here in this paper, we have analyzed scenarios for leader-follower vehicle convoys that have the potential to be unsafe, hazardous, or even fatal in order to provide insight on dangerous driving conditions for autonomous vehicle platoons. These scenarios were created in a simulation software called Prescan, and are made to reflect the behavior of the vehicle dynamics and sensor characteristics of a real-world vehicle convoy that is currently being tested at the American Center for Mobility (ACM) and sponsored by the Department of Energy (DOE), National Renewable Energy Laboratory (NREL), the U.S. Army Combat Capabilities Development Command - Ground Vehicle Systems Center (U.S. Army CC-DEVCOM) and the Michigan Department of Transportation (MDOT). The follower vehicle in this study is tested under multiple scenarios, equipped with a Dedicated Short Range vehicle-to-vehicle communication system (DSRC), a radar-based adaptive cruise control system (ACC) and a precision global positioning system (GPS).

42 ENGINEERING↗

The use of a high-order MEMS deformable mirror in the Gemini Planet Imager

We briefly review the development history of the Gemini Planet Imager's 4K Boston Micromachines MEMS deformable mirror. We discuss essential calibration steps and algorithms to control the MEMS with nanometer precision, including voltage-phase calibration and influence function characterization. We discuss the integration of the MEMS into GPI's Adaptive Optics system at Lawrence Livermore and present experimental results of 1.5 kHz closed-loop control. We detail mitigation strategies in the coronagraph to reduce the impact of abnormal actuators on final image contrast.

79 ASTRONOMY AND ASTROPHYSICS↗

Sci-Thur AM: YIS – 05: Prediction of lung tumor motion using a generalized neural network optimized from the average prediction outcome of a group of patients

Purpose: In image-guided adaptive radiotherapy systems, prediction of tumor motion is required to compensate for system latencies. However, due to the non-stationary nature of respiration, it is a challenge to predict the associated tumor motions. In this work, a systematic design of the neural network (NN) using a mixture of online data acquired during the initial period of the tumor trajectory, coupled with a generalized model optimized using a group of patient data (obtained offline) is presented. Methods: The average error surface obtained from seven patients was used to determine the input data size and number of hidden neurons for the generalized NN. To reduce training time, instead of using random weights to initialize learning (method 1), weights inherited from previous training batches (method 2) were used to predict tumor position for each sliding window. Results: The generalized network was established with 35 input data (∼4.66s) and 20 hidden nodes. For a prediction horizon of 650 ms, mean absolute errors of 0.73 mm and 0.59 mm were obtained for method 1 and 2 respectively. An average initial learning period of 8.82 s is obtained. Conclusions: A network with a relatively short initial learning time was achieved. Its accuracy is comparable to previous studies. This network could be used as a plug-and play predictor in which (a) tumor positions can be predicted as soon as treatment begins and (b) the need for pretreatment data and optimization for individual patients can be avoided.

60 APPLIED LIFE SCIENCES↗

Conservation and diversity in the ultralong third heavy-chain complementarity-determining region of bovine antibodies

Antibodies provide a broad defense against a vast array of antigens; however, the structural features that contribute to this diverse antigen recognition vary in different vertebrates. In cows, a subset of antibodies have an exceptionally long third heavy-chain complementarity-determining region (CDR H3) that is highly variable in sequence and includes multiple cysteines. These long CDR H3s (up to 69 residues) fold into a long stalk atop which sits a knob domain that is located far from the antibody surface. We have determined crystal structures of three bovine Fabs to decipher the conserved and variable features of ultralong CDR H3s that lead to diversity in antigen recognition. Despite high sequence variability, the stalks adopt a conserved β-ribbon structure, whereas the knob regions share a conserved β sheet that serves as a scaffold for two connecting loops of variable length and conformation, as well as one conserved disulfide. Variation in patterns and connectivity of the remaining disulfides contribute to the structural diversity of the knob. Finally, the unusual architecture of these ultralong bovine CDR H3s for generating diversity is unique in adaptive immune systems and may inform efforts in antibody engineering.

60 APPLIED LIFE SCIENCES↗

Hurtado summer 2025 REDWOODS PWFS code

This release includes code developed by Benjamin Gerard and Joel Hurtado in summer 2025 to model the performance of different modes of the reflective three-sided pyramid wavefront sensor instrument within the REDWOODS module of the Shane Adaptive Optics system at Lick observatory.

Gerard, BenjaminL [Lawrence Livermore National Lab↗

Adaptive Optics control GUI

This is a GUI to explore adaptive optics system performance related to closed-loop control theory.

Gerard, BenjaminL↗

PaRSEC: Scalability, flexibility, and hybrid architecture support for task-based applications in ECP

This paper highlights the most significant enhancements made to PaRSEC, a scalable task-based runtime system designed for hybrid machines, during the Exascale Computing Project (ECP). The enhancements focus on expanding the capabilities of PaRSEC to address the evolving landscape of parallel computing. Notable achievements include the integration of support for three major types of accelerators (NVIDIA, AMD, and Intel GPUs), the refinement and increased flexibility of the communication subsystem, and the introduction of new programming interfaces tailored for irregular applications. Additionally, the project resulted in the development of powerful debugging and performance analysis tools aimed at assisting users in understanding and optimizing their applications. We present a comprehensive demonstration of these advancements through a series of benchmarks and applications within ECP and beyond, thereby showcasing the enhanced capabilities of PaRSEC across the diverse architectures within the ECP, providing valuable insights into the runtime system’s adaptability and performance across varied computing environments.

Bouteiller, Aurelien↗

Breakup dynamics in a pressure-swirl injector for urea-water solution applications: A computational study

The co-optimization of in-cylinder combustion and after-treatment technology has become a major aspect in engine design and development, with the goal of meeting the increasingly restrictive emission regulations in the transportation industry. Selective Catalytic Reduction is a robust technology to control the emission of NO x , and the injection of urea in water solution is the exhaust tailpipe is a key aspect of its operation. The proposed work uses high-fidelity Computational Fluid Dynamics to characterize the atomization dynamics of the liquid jet in relevant cross-flow conditions. The study focuses on a commercial low-pressure (9 bar) pressure-swirl injector which is characterized in its internal geometry through high-resolution X-ray micro-computational tomography. The internal two-phase flow has been modeled according to the volume-of-fluid approach in a large eddy simulation framework and validated against near-nozzle X-ray radiography measurement. Moreover, characterizing the breakup dynamics for the swirling hollow cone formation, and assessing the influence of the cross-flow in the breakup dynamics was completed. The results have been reported proposing Re-Oh maps and probability density functions of the spray kinematics. Higher cross-flow momentum generates an increase in the jet intact length and a reduction of the liquid droplet diameters. The axial momentum of the jet is affected by the cross-flow already in the near-nozzle region, determining a relevant deviation of the spray velocities. In conclusion, this work aims to inform the initialization of Eulerian-Lagrangian spray models through the assignment of droplet kinematics and static one-way coupling between volume-of-fluid results and Lagrangian spray parcels, to be used for system-size domain simulations.

33 ADVANCED PROPULSION SYSTEMS↗