Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variable conductance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Rheology of composite solid propellants during motor casting

In a study conducted to evaluate flow parameters of uncured solid composite propellants during motor casting, two motors (1.8M-lb grain wt) were cast with a PBAN propellant exhibiting good flow characteristics in a 260-in. dia solid rocket motor. Attention is given to the effects of propellant compositional and processing variables on apparent viscosity as they pertain to rheological behavior and grain defect formation during casting. It is noted that optimized flow behavior is impaired with solid propellant loading. Non-Newtonian pseudoplastic flow is observed, which is dependent upon applied shear stress and the age of the uncured propellant.

Rogers, C. J.↗
NASA NTRS1978

Use of change detection in assessing development plans - A Philippine example

An aircraft/Landsat change-detection study conducted 1948-1972 on Marinduque Province, Republic of the Philippines, is discussed, and a procedure using both remote sensing and information systems for collection, spatial analysis, and display of periodic data is described. Each of the 4,008 25-hectare cells representing Marinduque were observed, and changes in and between variables were measured and tested using nonparametric statistics to determine the effect of specific land cover changes. Procedures using Landsat data to obtain a more continuous updating of the data base are considered. The system permits storage and comparison of historical and current data.

Coiner, J. C.↗
NASA NTRS1982

The feasibility of thermal inertia mapping for detection of perched water tables in semi-arid irrigated lands

The thermal inertia mapping remote sensing technique is evaluated as a potential method for delineating areas of shallow perched water tables and related salinization problems on a regional basis. This method for detecting shallow water tables is based on the existence of significant differences in soil thermal properties between wet and dry soil profiles. Ground observations were conducted at two different test sites in California along the flight line, with one site located in a perched water table area and the other site in a well drained area. Measurements were taken hourly during a four day period (two days before and two days after the flight) for variables such as radiometric, meteorologic, soil moisture and temperature profiles, and surface characteristics. Results indicate that it is not feasible using present apparent thermal inertia remote sensing techniques to reliably delineate regional patterns of very shallow water tables due to the complex environmental system. However, some features within specific fields which may be directly related to the local presence of shallow water tables, such as differences in evaporative cooling due to soil moisture effects between and within fields, can be detected using the thermal inertia technique.

Ezra, C. E.↗
NASA NTRS1986

High Reynolds number tests of a Douglas DLBA 032 airfoil in the Langley 0.3-meter transonic cryogenic tunnel

A wind-tunnel investigation of a Douglas advanced-technology airfoil was conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel (0.3-m TCT). The temperature was varied from 227 K (409 R) to 100 K (180 R) at pressures ranging from about 159 kPa (1.57 atm) to about 514 kPa (5.07 atm). Mach number was varied from 0.50 to 0.78. These variables provided a Reynolds number range (based on airfoil chord) from 6.0 to 30.0 x 10 to the 6th power. This investigation was specifically designed to: (1) test a Douglas airfoil from moderately low to flight-equivalent Reynolds numbers, and (2) evaluate sidewall-boundary-layer effects on transonic airfoil performance characteristics by a systematic variation of Mach number, Reynolds number, and sidewall-boundary-layer removal. Data are included which demonstrate the effects of fixing transition, Mach number, Reynolds number, and sidewall-boundary-layer removal on the aerodynamic characteristics of the airfoil. Also included are remarks on model design and model structural integrity.

Johnson, Charles B.↗
NASA NTRS1991

Boundary-element shape sensitivity analysis for thermal problems with nonlinear boundary conditions

Implicit differentiation of the discretized boundary integral equations governing the conduction of heat in solid objects subjected to nonlinear boundary conditions is shown to generate an accurate and economical approach for the computation of shape sensitivities for this class of problems. This approach involves the employment of analytical derivatives of boundary-element kernel functions with respect to shape design variables. A formulation is presented that can consistently account for both temperature-dependent convection and radiation boundary conditions. Several iterative strategies are presented for the solution of the resulting sets of nonlinear equations and the computational performances examined in detail. Multizone analysis and zone condensation strategies are demonstrated to provide substantive computational economies in this process for models with either localized nonlinear boundary conditions or regions of geometric insensitivity to design variables. A series of nonlinear example problems are presented that have closed-form solutions.

Kane, James H.↗
NASA NTRS1999

Flame Spread and Extinction in Partial-Gravity Environments

Considerable progress has been made in understanding the mechanisms of spreading flames under certain conditions, nearly all under the influence of normal Earth gravity. Recently, several investigators have studied some aspects of flame spread in purely forced flows in microgravity. However, very few have considered (especially experimentally) purely-buoyant flow influences, using gravity as a variable. In addition to the scientific interest in understanding how variable gravity affects flame spread in purely-buoyant flow, prospective human exploration of the Moon and Mars provides an incentive to obtain practical knowledge for use in fire-safety related engineering and mission operations in those partial-gravity environments. The purpose of this research effort is to conduct a focused experimental effort to observe the behavior of flames spreading both upward (concurrent flow) and downward (opposed flow) over thin fuels in partial-gravity environments, and to extend an existing numerical model of flame spread to predict flammability and flame spread behavior in these two regimes. A significant aspect of the experimental effort is to use a special device to improve the simulated partial-gravity environment achievable aboard reduced-gravity aircraft facilities.

K R Sacksteder↗
NASA NTRS1999

Focused Experimental and Analytical Studies of the RBCC Rocket-Ejector

The rocket-ejector mode of a Rocket Based Combined Cycle Engine (RBCC) was studied through a joint experimental/analytical approach. A two-dimensional variable geometry rocket-ejector system with enhanced optical access was designed and fabricated for experimentation. The rocket-ejector system utilizes a single two-dimensional gaseous oxygen/gaseous hydrogen rocket as the ejector. To gain a systematic understanding of the rocket ejector's internal fluid mechanic/combustion phenomena, experiments were conducted with both direct-connect and sea-level static configurations for a range of rocket operating conditions Overall system performance was obtained through Global measurements of wall static pressure profiles, heat flux profiles and engine thrust, whereas detailed mixing and combustion information was obtained through Raman spectroscopy measurements of major species (gaseous oxygen, hydrogen. nitrogen and water vapor). These experimental efforts were complemented by Computational Fluid Dynamic (CFD) flowfield analyses.

Lehman, M.↗
NASA NTRS2001

Vibration Sensitivity of a Wide-Temperature Electronically Scanned Pressure Measurement (ESP) Module

A vibration sensitivity test was conducted on a Wide-Temperature ESP module. The test object was Module "M4," a 16-channel, 4 psi unit scheduled for installation in the Arc Sector of NTF. The module was installed on a vibration exciter and loaded to positive then negative full-scale pressures (+/-2.5 psid). Test variables were the following: Vibration frequencies: 20, 55, 75 Hz. Vibration level: 1 g. Vibration axes: X, Y, Z. The pressure response was measured on each channel, first without and then with the vibration turned on, and the difference analyzed by means of the statistical t-test. The results show that the vibration sensitivity does not exceed 0.01% Full Scale Output per g (with the exception of one channel on one axis) to a 95 percent confidence level. This specification, limited by the resolution of the pressure source, lies well below the total uncertainty specification of 0.1 percent Full Scale Output.

Zuckerwar, Allan J.↗
NASA NTRS2007

Midodrine as a Countermeasure for Post-spaceflight Orthostatic Hypotension

Up to 30 % of astronauts exhibit post-spaceflight orthostatic hypotension due to inadequate norepinephrine release during upright posture following short duration spaceflight. We hypothesize that the (alpha)1-adrenergic agonist midodrine will be an effective countermeasure. This study is being conducted in 2 phases. The first phase is complete and consisted testing six short duration crew members. All of these subjects participated in preflight and postflight tilt testing on a control flight as well as on the test flights, where midodrine was administered after landing, 1 hour before testing. Hemodynamic variables were compared between the 2 flights. Midodrine improved stroke volume, cardiac output, systolic pressure and heart rate, without increasing vascular resistance. None of these subjects experienced orthostatic hypotension on landing day. Phase II is similar to phase I, except that midodrine is ingested in flight (near TIG) and the tilt test is performed immediately after landing on the CTV. One crewmember has completed phase II testing. This crewmember had no evidence of orthostatic hypotension or presyncope, four additional crewmembers have volunteered for this study. To date, midodrine has been shown to be a safe and effective countermeasure to post-spaceflight orthostatic hypotension.

Platts, Steven H.↗
NASA NTRS2016

Pre-Mission Input Requirements to Enable Successful Sample Collection by A Remote Field/EVA Team

The FINESSE (Field Investigations to Enable Solar System Science and Exploration) team, part of the Solar System Exploration Virtual Institute (SSERVI), is a field-based research program aimed at generating strategic knowledge in preparation for human and robotic exploration of the Moon, near-Earth asteroids, Phobos and Deimos, and beyond. In contract to other technology-driven NASA analog studies, The FINESSE WCIS activity is science-focused and, moreover, is sampling-focused with the explicit intent to return the best samples for geochronology studies in the laboratory. We used the FINESSE field excursion to the West Clearwater Lake Impact structure (WCIS) as an opportunity to test factors related to sampling decisions. We examined the in situ sample characterization and real-time decision-making process of the astronauts, with a guiding hypothesis that pre-mission training that included detailed background information on the analytical fate of a sample would better enable future astronauts to select samples that would best meet science requirements. We conducted three tests of this hypothesis over several days in the field. Our investigation was designed to document processes, tools and procedures for crew sampling of planetary targets. This was not meant to be a blind, controlled test of crew efficacy, but rather an effort to explicitly recognize the relevant variables that enter into sampling protocol and to be able to develop recommendations for crew and backroom training in future endeavors.

FINESSE↗
NASA NTRSDate not supplied

Comparing the Regional Variability of Emission Factors of Greenhouse Gases Over Different Landscape During FIREX-AQ Campaign

Biomass burning (wildfires, prescribed and agricultural burning) is one of the major sources of trace gases and particulate emissions and annual variability in growth rates. Biomass burning can impact local, regional, and global air quality, as well as climate. Measurements of emissions from biomass burning are crucial to a better understanding of how it influences and interacts with biogeochemical cycles. High resolution in-situ measurements were recorded onboard the NASA DC-8 aircraft during the FIREX-AQ (Fire Influence on Regional to Global Environments and Air Quality) airborne field campaign July-September, 2019, which was conducted over the continental U.S. Fire emission factors (EF) are essential input for emissions models used to develop biomass burning emission inventories. Here we present the Emission Ratio (ER), MCE (Modified Combustion Efficiency), and EF (Emission Factor) of CO2, CO, and CH4, which constitute the majority of carbon emitted from the wildland, prescribed, and agricultural fires. EFCO2, EFCO, and EFCH4 from the Wildland fires at Williams Flats, WA (primarily Douglas Fir, Ponderosa pine, wheatgrass: 50-75%), ranged from 1527 – 1820 g/kg (Avg. 1641±42), 6.5 – 174.1 g/kg (110.5±24.1), and 0.7 – 11.3 g/kg (6.2±1.9), respectively. EFs from the Arizona CASTLE fire, with somewhat different fuel sources (primarily Ponderosa pine, Douglas fir: 40-70%) ranged from 1266 – 1667 g/kg (1596±59), 99.5 – 344.5 g/kg (136.7±36.8), and 0.4 – 9.2 g/kg (7.2±1.7), respectively. Another primary driver of EFs is likely fire weather. Detailed variability of greenhouse gas EFs will be examined and presented in accordance with different fuels and fire conditions at burned areas, specifically within unique wildland and croplands, using the FCCS (Fuel Characteristic Classification System) 30m land cover identification and the Cropland Data Layer (CDL).

Biomass burning↗
NASA NTRSDate not supplied

Comparing the regional variability of emission factors of greenhouse gases over different landscape during FIREX-AQ campaign

Biomass burning (wildfires, prescribed and agricultural burning) is one of the major sources of trace gases and particulate emissions and annual variability in growth rates. Biomass burning can impact local, regional, and global air quality, as well as climate. Measurements of emissions from biomass burning are crucial to a better understanding of how it influences and interacts with biogeochemical cycles. High resolution in-situ measurements were recorded onboard the NASA DC-8 aircraft during the FIREX-AQ (Fire Influence on Regional to Global Environments and Air Quality) airborne field campaign July-September, 2019, which was conducted over the continental U.S. Fire emission factors (EF) are essential input for emissions models used to develop biomass burning emission inventories. Here we present the Emission Ratio (ER), MCE (Modified Combustion Efficiency), and EF (Emission Factor) of CO2, CO, and CH4, which constitute the majority of carbon emitted from the wildland, prescribed, and agricultural fires. EFCO2, EFCO, and EFCH4 from the Wildland fires at Williams Flats, WA (primarily Douglas Fir, Ponderosa pine, wheatgrass: 50-75%), ranged from 1527 – 1820 g/kg (Avg. 1641±42), 6.5 – 174.1 g/kg (110.5±24.1), and 0.7 – 11.3 g/kg (6.2±1.9), respectively. EFs from the Arizona CASTLE fire, with somewhat different fuel sources (primarily Ponderosa pine, Douglas fir: 40-70%) ranged from 1266 – 1667 g/kg (1596±59), 99.5 – 344.5 g/kg (136.7±36.8), and 0.4 – 9.2 g/kg (7.2±1.7), respectively. Another primary driver of EFs is likely fire weather. Detailed variability of greenhouse gas EFs will be examined and presented in accordance with different fuels and fire conditions at burned areas, specifically within unique wildland and croplands, using the FCCS (Fuel Characteristic Classification System) 30m land cover identification and the Cropland Data Layer (CDL).

Biomass burning↗
NASA NTRS1985

A GIS approach to conducting biogeochemical research in wetlands

A project was initiated to develop an environmental data base to address spatial aspects of both biogeochemical cycling and resource management in wetlands. Specific goals are to make regional methane flux estimates and site specific water level predictions based on man controlled water releases within a wetland study area. The project will contribute to the understanding of the Earth's biosphere through its examination of the spatial variability of methane emissions. Although wetlands are thought to be one of the primary sources for release of methane to the atmosphere, little is known about the spatial variability of methane flux. Only through a spatial analysis of methane flux rates and the environmental factors which influence such rates can reliable regional and global methane emissions be calculated. Data will be correlated and studied from Landsat 4 instruments, from a ground survey of water level recorders, precipitation recorders, evaporation pans, and supplemental gauges, and from flood gate water release; and regional methane flux estimates will be made.

Brannon, David P.↗
NASA NTRS1972

An experimental investigation of STOL longitudinal flying qualities in the landing approach using the variable stability X-22A aircraft.

The first in-flight flying qualities experiment using the variable stability X-22A aircraft investigated longitudinal flying qualities requirements for STOL aircraft in terminal area operations. Emphasis was placed on defining minimum requirements for the short-term response in VFR and IFR landing approaches at representative steep STOL approach conditions of 65 and 80 knots. Evaluation flights were conducted in negligible and moderate turbulence for a wide range of short-term frequencies and dampings. The results were compared with the short-term requirements of MIL-F-83300. The specified Level 1 and 2 VFR boundaries were found to be approximately valid in moderate turbulence for both VFR and IFR flight conditions. In negligible turbulence, the specified VFR Level 2 boundary was also approximately valid but the Level 1 boundary was found to be too stringent. Pilot rating gradients with damping were more apparent than with frequency for the range investigated.

Schuler, J. M.↗
NASA NTRS1975

Thermal loading in the laser holography nondestructive testing of a composite structure

A laser holographic interferometry method that has variable sensitivity to surface deformation was applied to the investigation of composite test samples under thermal loading. A successful attempt was made to detect debonds in a fiberglass-epoxy-ceramic plate. Experimental results are presented along with the mathematical analysis of the physical model of the thermal loading and current conduction in the composite material.

Liu, H. K.↗
NASA NTRS1977

Novel duplex vapor-electrochemical method for silicon solar cells

Silicon obtained by the SiF4-Na reaction was analyzed by spark source mass spectrometry (SSMS). Silicon samples prepared from induction melted powder were evaluated for electrical properties using four point probe conductivity and thermoelectric methods. SiF4-Na reaction under P sub SiF4 greater than 1 atmosphere. The amount of silicon produced was increased from 25 g per batch (in the glass reactor) to greater than 70 g per batch in the stainless steel reactor. The study of the effects of reaction variables such as P sub SiF4 and maximum temperature attained on the particle size of silicon powder showed that the silicon particle size tends to grow larger with increasing pressure of the SiF4 gas in the reaction system.

Kapur, V. K.↗
NASA NTRS1984

In-flight acoustic testing techniques using the YO-3A Acoustic Research Aircraft

This report discusses the flight testing techniques and equipment employed during air-to-air acoustic testing of helicopters at Ames Research Center. The in flight measurement technique used enables acoustic data to be obtained without the limitations of anechoic chambers or the multitude of variables encountered in ground based flyover testing. The air-to-air testing is made possible by the NASA YO-3A Acoustic Research Aircraft. This "Quiet Aircraft' is an acoustically instrumented version of a quiet observation aircraft manufactured for the military. To date, tests with the following aircraft have been conducted: YO-3A background noise; Hughes 500D; Hughes AH-64; Bell AH-1S; Bell AH-1G. Several system upgrades are being designed and implemented to improve the quality of data. This report will discuss not only the equipment involved and aircraft tested, but also the techniques used in these tests. In particular, formation flying position locations, and the test matrices will be discussed. Examples of data taken will also be presented.

Cross, J. L.↗
NASA NTRS1983

In-flight acoustic testing techniques using the YO-3A acoustic research aircraft

This report discusses the flight testing techniques and equipment employed during air-to-air acoustic testing of helicopters at Ames Research Center. The in-flight measurement technique used enables acoustic data to be obtained without the limitations of anechoic chambers or the multitude of variables encountered in ground based flyover testing. The air-to-air testing is made possible by the NASA YO-3A Acoustic Research Aircraft. This 'Quiet Aircraft' is an acoustically instrumented version of a quiet observation aircraft manufactured for the military. To date, tests with the following aircraft have been conducted: YO-3A background noise; Hughes 500D; Hughes AH-64; Bell AH-1S; Bell AH-1G. Several system upgrades are being designed and implemented to improve the quality of data. This report will discuss not only the equipment involved and aircraft tested, but also the techniques used in these tests. In particular, formation flying, position locations, and the test matrices will be discussed. Examples of data taken will also be presented.

Cross, J. L.↗