SEARCH · Engineering Papers

Results for “unknowns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Impacts of Precipitation Events on Concentrations of Oxygenated Gas- and Particle-Phase Compounds Observed in the Amazon

Removal of gases and particles by precipitation (wet deposition) is a critical process that significantly influences the transport and chemical transformation of atmospheric compounds. However, there are few studies that directly measure or constrain the rates of this process under real-world conditions. This work quantifies the net change in ambient concentrations during precipitation events (removal rates) of gas- and particle-phase organic compounds at a surface site near Manaus, Brazil, during the GoAmazon2014/5 campaign. Removal rates of identified and unknown compounds that have been previously classified into source-based clusters are measured during rain events and categorized based on estimated properties of compounds and clusters. Highly oxygenated gases, such as isoprene oxidation products, are removed during precipitation events with a median removal rate of 0.09 h –1 and the fastest analyte is removed at a rate of 0.22 h –1 . Removal rates of particle-phase compounds are observed at roughly this median rate, while less soluble gases, such as terpenes, exhibit low removal rates. These results are roughly in agreement with prior theoretical estimates of wet deposition rates for comparable compounds, providing an empirical point of comparison while noting that our metric reflects the net influence of precipitation events rather than wet deposition alone.

atmospheric chemistry↗

DOE OSTI2026

Chemoproteomic Elucidation of β-Lactam Drug Targets in Mycobacterium abscessus

The pathogen Mycobacterium abscessus (Mab) can cause severe and difficult-to-treat chronic lung infections. Despite the rising incidence and clinical concern of Mab infections, treatment options are limited and often ineffective. Treatment is complicated by Mab’s ability to persist in a nonreplicating, drug-resistant state. Several β-lactam antibiotics are potently bactericidal against Mab but are underutilized because their molecular mechanisms of action against Mab are incompletely understood. In the current study, we used β-lactam-derived activity-based probes and chemoproteomics to report the first comprehensive list of Mab enzymes targeted by β-lactams. We compared β-lactam targets across two Mab subspecies in actively replicating and nonreplicating cultures, using a new carbon starvation model of persistence. We identified 17 targets that were active in every condition tested, seven of which were previously unknown to bind β-lactams. Lastly, we characterized the β-lactamase activity and β-lactam inhibition profiles of nine Mab enzymes, demonstrating that imipenem inhibits these targets more effectively than cefoxitin. These findings demonstrate β-lactam target engagement in persistent Mab and provide clarity on the mechanisms of action of clinically relevant β-lactams in Mab, crucial steps toward fully realizing their potential for treating infections caused by this opportunistic pathogen.

Mycobacterium abscessus↗

DOE OSTI2026

Role of Amorphous Chains in Nanoplastic Formation from Semicrystalline Polymers

Semicrystalline polymers, e.g., polyethylene terephthalate (PET), release micro- (100 nm to 1 mm) and nanoplastics (up to 100 nm) [MNPL] when they are degraded under quiescent conditions. However, the exact molecular mechanisms leading to material fragmentation into MNPL are unknown. Here, we monitor the evolution of chain molecular weight and the MNPL production kinetics during hydrolysis of PET pellets. We find that only ~0.6% of the amorphous phase ester bonds are hydrolyzed at the onset of MNPL release. Then, by combining a random scission model with measured amorphous spacings, we estimate that only ~15% of the stress transmitters in the amorphous phase, namely, bridges and entangled loops, have failed by this point. Thus, spontaneous fragmentation of the semicrystalline nanostructure occurs despite significant intercrystalline connectivity. We resolve this apparent contradiction by proposing that fragmentation can only occur when progressive tie-chain scission causes the material to undergo the ductile/brittle transition. Mechanistically, we speculate that the internal stresses responsible for material fragmentation are caused by processing (i.e., residual stresses) and/or sample densification induced by chemi-crystallization. We discuss additional factors that may affect our analysis and thus require further investigation, such as skin-core effects, preferential degradation of stress transmitters and/or recrystallization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Intrinsic Defects in MoS 2 Grown by Pulsed Laser Deposition: From Monolayers to Bilayers

Pulsed laser deposition (PLD) can be considered a powerful method for the growth of two-dimensional (2D) transition-metal dichalcogenides (TMDs) into van der Waals heterostructures. However, despite significant progress, the defects in 2D TMDs grown by PLD remain largely unknown and yet to be explored. In this work, we combine atomic resolution images and first-principles calculations to reveal the atomic structure of defects, grains, and grain boundaries in mono- and bilayer MoS 2 grown by PLD. We find that sulfur vacancies and MoS antisites are the predominant point defects in 2D MoS 2 . We predict that the aforementioned point defects are thermodynamically favorable under a Mo-rich/S-poor environment. The MoS 2 monolayers are polycrystalline and feature nanometer size grains connected by a high density of grain boundaries. In particular, the coalescence of nanometer grains results in the formation of 180° mirror twin boundaries consisting of distinct 4- and 8-membered rings. We show that PLD synthesis of bilayer MoS 2 results in various structural symmetries, including AA' and AB, but also turbostratic with characteristic moiré patterns. Moreover, we report on the experimental demonstration of an electron beam-driven transition between the AB and AA' stacking orientations in bilayer MoS 2 . These results provide a detailed insight into the atomic structure of monolayer MoS 2 and the role of the grain boundaries on the growth of bilayer MoS 2 , which has importance for future applications in optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A High-Entropy Oxide as High-Activity Electrocatalyst for Water Oxidation

High-entropy materials are an emerging pathway in the development of high-activity (electro)catalysts because of the inherent tunability and coexistence of multiple potential active sites, which may lead to earth-abundant catalyst materials for energy-efficient electrochemical energy storage. In this report, we identify how the multication composition in high-entropy perovskite oxides (HEO) contributes to high catalytic activity for the oxygen evolution reaction (OER), i.e., the key kinetically limiting half-reaction in several electrochemical energy conversion technologies, including green hydrogen generation. We compare the activity of the (001) facet of LaCr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 O 3-δ with the parent compounds (single B-site in the ABO 3 perovskite). While the single B-site perovskites roughly follow the expected volcano-type activity trends, the HEO clearly outperforms all of its parent compounds with 17 to 680 times higher currents at a fixed overpotential. As all samples were grown as an epitaxial layer, our results indicate an intrinsic composition–function relationship, avoiding the effects of complex geometries or unknown surface composition. In-depth X-ray photoemission studies reveal a synergistic effect of simultaneous oxidation and reduction of different transition metal cations during the adsorption of reaction intermediates. The surprisingly high OER activity demonstrates that HEOs are a highly attractive, earth-abundant material class for high-activity OER electrocatalysts, possibly allowing the activity to be fine-tuned beyond the scaling limits of mono- or bimetallic oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Inhomogeneous Magnetic Anisotropy in an Fe 5– x GeTe 2 Nanoflake Observed by Imaging

Few-layer flakes of ferromagnetic Fe 5–x GeTe 2 with x = 0.3 (F5GT) possess a c-axis magnetocrystalline anisotropy that is large enough below ∼200 K to outcompete the easy-plane shape anisotropy, yielding distinctive magnetic microstructures with out-of-plane (OOP) magnetizations. Using photoemission electron microscopy (PEEM) with magnetic contrast from X-ray magnetic circular dichroism (XMCD) to study a thermally demagnetized h-BN-protected nanoflake of F5GT at 110 K, we observe a micron-scale coexistence between domains with OOP magnetizations (∼70% areal fraction) and hitherto unknown domains in which in-plane (IP) magnetization components dominate (∼30% areal fraction). The regions with dominant IP magnetization components do not correlate with small variations of flake thickness (6–10 nm) and instead arise from local changes of magnetocrystalline anisotropy due to a hitherto unidentified chemical inhomogeneity that we suggest to be a higher concentration of Fe vacancies. Our observation of micron-scale inhomogeneity would likely be missed if imaging a single flake orientation and should affect the viability and performance of van der Waals (vdW) spintronic devices with F5GT electrodes.

2D materials↗

DOE OSTI2026

Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride

Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdH x ) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdH x and β-PdH x phases is often considered a key to determining the transformation pathways. α/β-PdH x interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdH x interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. In conclusion, these findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.

Lee, Daewon [Lawrence Berkeley National Laboratory↗

DOE OSTI2025

Beyond Optimization: Exploring Novelty Discovery in Autonomous Experiments

Autonomous experiments (AEs) are transforming how scientific research is conducted by integrating artificial intelligence with automated experimental platforms. Current AEs primarily focus on the optimization of a predefined target; while accelerating this goal, such an approach limits the discovery of unexpected or unknown physical phenomena. Here, we introduce a novel framework, INS 2 ANE (Integrated Novelty Score−Strategic Autonomous Non-Smooth Exploration), to enhance the discovery of novel phenomena in autonomous microscopy experimentation. Our method integrates two key components: (1) a novelty scoring system that evaluates the uniqueness of experimental results and (2) a strategic sampling mechanism that promotes exploration of under-sampled regions even if they appear less promising by conventional criteria. We validate this approach on a preacquired data set with a known ground truth comprising of image−spectral pairs. We further implement the process on autonomous scanning probe microscopy experiments. INS 2 ANE significantly increases the diversity of explored phenomena in comparison to conventional optimization routines, enhancing the likelihood of discovering previously unobserved phenomena. These results demonstrate the potential for autonomous microscopy experiments to enhance the scientific discovery by navigating complex experimental spaces to uncover novel phenomena.

Materials↗

DOE OSTI2025

Streamlining and Simplifying the Chemical Separationof Berkelium (249Bk) from Other Actinides/Lanthanides andFission Products

Abstract Separation of an individual heavy actinide from other actinides, lanthanides, and coproduced fission products is challenging not only because of their similarity in chemistry but also because the chemistry of heavy actinides is largely unknown. At present, the cation-exchange chromatography with α-hydroxyisobutyric acid (CX-AHIB) method is used to isolate milli- to picogram quantities of heavy actinides (i.e., 249Bk, 252Cf, 254Es, and 257Fm). This method allows simultaneous separation of these actinides; however, isolating a clean individual product with a high yield has proven challenging. The process is also very slow and labor-intensive and requires precise control of various chemical conditions, such as pH, temperature, and AHIB concentration. Developing a separation scheme for heavy actinides requires identifying their unique feature and then harnessing this feature in the separation process design. The unique characteristic of Bk4+ is that it does not adsorb onto anion exchange resin columns, unlike other tetravalent actinides. This article discusses what makes Bk unique and how this discovery led to a new method for separating Bk from adjacent actinides, lanthanides, and coproduced fission products. The method employed two different resin columns in tandem to separate unwanted actinides from 249Bk, followed by fine cleanup of 249Bk. The advantages of the new Bk method over the CX-AHIB method in Bk production are discussed, and the performance and robustness of the proposed method were assessed in two recent production campaigns.

Chemistry↗

DOE OSTI2020

Lasing from Finite Plasmonic Nanoparticle Lattices

Small lasers can generate coherent light for integrated photonics, in-vivo cellular imaging, and solid-state lighting. Unlike conventional lasers, plasmonic lasers can generate coherent light at sub-wavelength scales, although cavity architectures based on metal films and semiconducting gain exhibit large radiative losses and lack directional emission. In contrast, two-dimensional (2D) metal nanoparticle arrays surrounded by organic dyes can support lasing with high directionality at room temperature. Yet, the relationship between the number of nanoparticles in a finite lattice and their lasing emission characteristics is unknown. Here we show that the number of units in 2D gold nanoparticle lattices is critical to generate robust cavity resonances and lasing emission. Narrower lattice plasmons associated with stronger electromagnetic near fields are observed as nanoparticle number increases. Experimentally, we demonstrate lasing from a 30x30 nanoparticle lattice. Semi-quantum modeling indicates lower lasing thresholds and faster population inversion dynamics with higher nanoparticle numbers. These findings indicate that finite lattices of nanoparticles integrated with gain can function as independent, coherent light sources for optical multiplexing and lab-on-a-chip applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Developing Fluorescence-Based Sensors to Support Rare Earth Element Separation

Rare earth elements (REEs) are essential to most renewable energy technologies. Unfortunately, as we transition to sustainable energy production, the demand for REEs is rapidly growing well beyond current rates of production. As a result, novel means of efficient, scalable, and easily adaptable methods for processing primary and recycle feedstocks are needed. Development and integration of sensors for highly selective in-line monitoring can support more efficient design and testing of such novel separation processes, as well as more cost-effective deployment of those separation flowsheets. Work here will explore the application of fluorescence spectroscopy, a highly sensitive and selective technique, to quantify multiple lanthanides in complex mixtures including known interferents or quenching agents. Results include identification of the optimal excitation wavelength and the limit of detection of various rare earth elements as well as the performance of data-science-based quantification approaches in streams where “unknowns” are present. Overall, the data science tools in conjunction with optical sensor data were able to quantify analytes in the presence of other lanthanides which can be anticipated in the actual industrial stream. Here we include characterization of lanthanides in a microfluidic device similar to those used in new process development. This study demonstrates the capability of utilizing fluorescence spectroscopy to quantify analytes in a complicated solution matrix, suggesting this is a successful approach for in-line monitoring to optimize the separation efficiency in an industrial stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Orthogonal Degron System for Controlled Protein Degradation in Cyanobacteria

Synechococcus elongatus PCC 7942 is a model cyanobacterium for study of the circadian clock, photosynthesis, and bioproduction of chemicals, yet nearly 40% of its gene identities and functions remain unknown, in part due to limitations of the existing genetic toolkit. While classical techniques for the study of genes (e.g., deletion or mutagenesis) can yield valuable information about the absence of a gene and its associated protein, there are limits to these approaches, particularly in the study of essential genes. In this research, we developed a tool for inducible degradation of target proteins in S. elongatus by adapting a method using degron tags from the Mesoplasma florum transfer-messenger RNA (tmRNA) system. We observed that M. florum lon protease can rapidly degrade exogenous and native proteins tagged with the cognate sequence within hours of induction. We used this system to inducibly degrade the essential cell division factor, FtsZ, as well as shell protein components of the carboxysome. Our results have implications for carboxysome biogenesis and the rate of carboxysome turnover during cell growth. Lon protease control of proteins offers an alternative approach for the study of essential proteins and protein dynamics in cyanobacteria.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

In Situ ATR–SEIRAS of Carbon Dioxide Reduction at a Plasmonic Silver Cathode

Illumination of a voltage-biased plasmonic Ag cathode during CO 2 reduction results in a suppression of the H 2 evolution reaction while enhancing CO 2 reduction. This effect has been shown to be photonic rather than thermal, but the exact plasmonic mechanism is unknown. Here in this paper, we conduct an in situ ATR–SEIRAS (attenuated total reflectance–surface-enhanced infrared absorption spectroscopy) study of a sputtered thin film Ag cathode on a Ge ATR crystal in CO 2 -saturated 0.1 M KHCO 3 over a range of potentials under both dark and illuminated (365 nm, 125 mW cm –2 ) conditions to elucidate the nature of this plasmonic enhancement. We find that the onset potential of CO 2 reduction to adsorbed CO on the Ag surface is -0.25 V RHE and is identical in the light and the dark. As the production of gaseous CO is detected in the light near this onset potential but is not observed in the dark until -0.5 V RHE , we conclude that the light must be assisting the desorption of CO from the surface. Furthermore, the HCO 3 – wavenumber and peak area increase immediately upon illumination, precluding a thermal effect. We propose that the enhanced local electric field that results from the localized surface plasmon resonance (LSPR) is strengthening the HCO 3 – bond, further increasing the local pH. This would account for the decrease in H 2 formation and increase the CO 2 reduction products in the light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Quaternary Charge-Transfer Complex Enables Photoenzymatic Intermolecular Hydroalkylation of Olefins

Intermolecular C–C bond-forming reactions are underdeveloped transformations in the field of biocatalysis. Here we report a photoenzymatic intermolecular hydroalkylation of olefins catalyzed by flavin-dependent ‘ene’-reductases. Radical initiation occurs via photoexcitation of a rare high-order enzyme-templated charge-transfer complex that forms between an alkene, α-chloroamide, and flavin hydroquinone. This unique mechanism ensures that radical formation only occurs when both substrates are present within the protein active site. Here, this active site can control the radical terminating hydrogen atom transfer, enabling the synthesis of enantioenriched γ-stereogenic amides. This work highlights the potential for photoenzymatic catalysis to enable new biocatalytic transformations via previously unknown electron transfer mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Exploring the Role of the Central Carbide of the Nitrogenase Active-Site FeMo-cofactor through Targeted 13 C Labeling and ENDOR Spectroscopy

Mo-dependent nitrogenase is a major contributor to global biological N 2 reduction, which sustains life on Earth. Its multi-metallic active-site FeMo-cofactor (Fe 7 MoS 9 C-homocitrate) contains a carbide (C 4– ) centered within a trigonal prismatic CFe 6 core resembling the structural motif of the iron carbide, cementite. The role of the carbide in FeMo-cofactor binding and activation of substrates and inhibitors is unknown. Here, to explore this role, the carbide has been in effect selectively enriched with 13 C, which enables its detailed examination by ENDOR/ESEEM spectroscopies. 13 C-carbide ENDOR of the S = 3/2 resting state (E 0 ) is remarkable, with an extremely small isotropic hyperfine coupling constant, C a = +0.86 MHz. Turnover under high CO partial pressure generates the S = 1/2 hi-CO state, with two CO molecules bound to FeMo-cofactor. This conversion surprisingly leaves the small magnitude of the 13 C carbide isotropic hyperfine-coupling constant essentially unchanged, C a = –1.30 MHz. This indicates that both the E 0 and hi-CO states exhibit an exchange-coupling scheme with nearly cancelling contributions to C a from three spin-up and three spin-down carbide-bound Fe ions. In contrast, the anisotropichyperfine coupling constant undergoes a symmetry change upon conversion of E 0 to hi-CO that may be associated with bonding and coordination changes at Fe ions. In combination with the negligible difference between CFe 6 core structures of E 0 and hi-CO, these results suggest that in CO-inhibited hi-CO the dominant role of the FeMo-cofactor carbide is to maintain the core structure, rather than to facilitate inhibitor binding through changes in Fe-carbide covalency or tretching/breaking of carbide–Fe bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Effective Storage of Electrons in Water by the Formation of Highly Reduced Polyoxometalate Clusters

Aqueous solutions of polyoxometalates (POMs) have been shown to have potential as high-capacity energy storage materials due to their potential for multi-electron redox processes, yet the mechanism of reduction and practical limits are currently unknown. Herein, we explore the mechanism of multi-electron redox processes that allow the highly reduced POM clusters of the form {MO 3 } y to absorb y electrons in aqueous solution, focusing mechanistically on the Wells-Dawson structure X 6 [P 2 W 18 O 62 ], which comprises 18 metal centers and can uptake up to 18 electrons reversibly (y = 18) per cluster in aqueous solution when the countercations are lithium. This unconventional redox activity is rationalized by density functional theory, molecular dynamics simulations, UV-vis, electron paramagnetic resonance spectroscopy, and small-angle X-ray scattering spectra. These data point to a new phenomenon showing that cluster protonation and aggregation allow the formation of highly electron-rich meta-stable systems in aqueous solution, which produce H 2 when the solution is diluted. Finally, we show that this understanding is transferrable to other salts of [P 5 W 30 O 110 ] 15- and [P 8 W 48 O 184 ] 40- anions, which can be charged to 23 and 27 electrons per cluster, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

The Single Residue K12 Governs the Exceptional Voltage Sensitivity of Mitochondrial Voltage-Dependent Anion Channel Gating

The voltage-dependent anion channel (VDAC) is a β-barrel channel of the mitochondrial outer membrane (MOM) that passively transports ions, metabolites, polypeptides, and single-stranded DNA. VDAC responds to a transmembrane potential by “gating,” i.e. transitioning to one of a variety of low-conducting states of unknown structure. The gated state results in nearly complete suppression of multivalent mitochondrial metabolite (such as ATP and ADP) transport, while enhancing calcium transport. Voltage gating is a universal property of β-barrel channels, but VDAC gating is anomalously sensitive to transmembrane potential. Here, we show that a single residue in the pore interior, K12, is responsible for most of VDAC’s voltage sensitivity. Using the analysis of over 40 μs of atomistic molecular dynamics (MD) simulations, we explore correlations between motions of charged residues inside the VDAC pore and geometric deformations of the β-barrel. Residue K12 is bistable; its motions between two widely separated positions along the pore axis enhance the fluctuations of the β-barrel and augment the likelihood of gating. Single channel electrophysiology of various K12 mutants reveals a dramatic reduction of the voltage-induced gating transitions. The crystal structure of the K12E mutant at a resolution of 2.6 Å indicates a similar architecture of the K12E mutant to the wild type; however, 60 μs of atomistic MD simulations using the K12E mutant show restricted motion of residue 12, due to enhanced connectivity with neighboring residues, and diminished amplitude of barrel motions. We conclude that β-barrel fluctuations, governed particularly by residue K12, drive VDAC gating transitions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

How the Bioinspired Fe 2 Mo 6 S 8 Chevrel Breaks Electrocatalytic Nitrogen Reduction Scaling Relations

The nitrogen reduction reaction (NRR) is a renewable alternative to the energy- and CO 2 -intensive Haber–Bosch NH 3 synthesis process but is severely limited by the low activity and selectivity of studied electrocatalysts. The Chevrel phase Fe 2 Mo 6 S 8 has a surface Fe–S–Mo coordination environment that mimics the nitrogenase FeMo-cofactor and was recently shown to provide state-of-the-art activity and selectivity for NRR. Here, we elucidate the previously unknown NRR mechanism on Fe 2 Mo 6 S 8 via grand-canonical density functional theory (GC-DFT) that realistically models solvated and biased surfaces. Fe sites of Fe 2 Mo 6 S 8 selectively stabilize the key *NNH intermediate via a narrow band of free-atom-like surface d-states that selectively hybridize with p-states of *NNH, which results in Fe sites breaking NRR scaling relationships. These sharp d-states arise from an Fe–S bond dissociation during N 2 adsorption that mimics the mechanism of the nitrogenase FeMo-cofactor. Furthermore, we developed a new GC-DFT-based approach for calculating transition states as a function of bias (GC-NEB) and applied it to produce a microkinetic model for NRR at Fe 2 Mo 6 S 8 that predicts high activity and selectivity, in close agreement with experiments. Furthermore, our results suggest new design principles that may identify effective NRR electrocatalysts that minimize the barriers for *N 2 protonation and *NH 3 desorption and that may be broadly applied to the rational discovery of stable, multinary electrocatalysts for other reactions where narrow bands of surface d-states can be tuned to selectively stabilize key reaction intermediates and guide selectivity toward a target product. Furthermore, our results highlight the importance of using GC-DFT and GC-NEB to accurately model electrocatalytic reactions.

10 SYNTHETIC FUELS↗