Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Multidisciplinary study of Wyoming test sites

The author has identified the following significant results. Investigation of a variety of applications of EREP photographic data demonstrated that EREP S-190 data offer a unique combination of synoptic coverage and image detail. The broad coverage is ideal for regional geologic mapping and tectonic analysis while the detail is adequate for mapping of crops, mines, urban areas, and other relatively small features. The investigative team at the University of Wyoming has applied the EREP S-190 data to: (1) analysis of photolinear elements of the Powder River Basin, southern Montana, and the Wind River Mountains; (2) drainage analysis of the Powder River Basin and Beartooth Mountains; (3) lithologic and geologic mapping in the Powder River Basin, Black Hills, Green River Basin, Bighorn Basin and Southern Bighorn Mountains; (4) location of possible mineralization in the Absaroka Range; and (5) land use mapping near Riverton and Gillette. All of these applications were successful to some degree. Image enhancement procedures were useful in some efforts requiring distinction of small objects or subtle contrasts.

Houston, R. S.↗
NASA NTRS2005

Salt Kinematics and InSAR

As part of a long-term attempt to learn how the climatic and tectonic signal interact to shape a steady state mountain monitored displacement of a markers in SE termination and also near the summit of a small viscous salt fountain extruding onto the Central plateau of Iran. The marker displacements relate to the first InSAR interferograms of salt extrusion (980913 to 990620) calculated Earth tides, winds, air pressures and temperatures. In the first documented staking exercise, hammered wooden stakes vertically through the surgical marl (c. 1 Ocm deep) onto the top of crystalline salt. These stakes installed in an irregular array elongate E-W along the c.50 m high cliff marking the effective SE terminus of the glacier at Qum Kuh(Centra1 Iran) ,just to the E of a NE trending river cliff about 40 m high. We merely measured the distances between pairs of stakes with known azimuth about 2 m apart to calculate sub horizontal strain in a small part of Qum Kuh. Stakes moved and micro strains for up to 46 pairs of stakes (p strain= ((lengthl-length2)/1engthl) x 10-1) was calculated for each seven stake epochs and plotted against their azimuth on simplified array maps. The data fit well the sine curves cxpected of the maximum and minimum strain ellipses. The first documented stakes located on the SE where the InSAR image show -1 1 to 0 mm pink to purple, 0 to lOmm purple to blue, and show high activity of salt in low activity area of the InSAR image (980913 to 990620).Short term micro strains of stake tie lines record anisotropic expansions due to heating and contraction due to cooling. All epochs changed between 7 to 1 17 days (990928 to000 1 16), showed 200 to 400 micro strain lengthening and shortening. The contraction and extension existed in each epoch, but the final strain was extension in E-W in Epoch land 6, contraction in E-W direction during epochs 2-3-4-5 and 7. The second pair of stakes hammered about 20 cm deep into the deep soils(more than 1 m) , near summit, where the colors change between 19 to 29mm in InSAR image(9809 13 to 990620). Additional information is included in the original abstract.

Aftabi, Pedarm↗
DOE OSTI2025

Suppression of the collisionless tearing mode by flow shear: implications for reconnection onset in the Alfvénic solar wind

We analyse the collisionless tearing mode instability of a current sheet with a strong shear flow across the layer. The growth rate decreases with increasing shear flow, and is completely stabilised as the shear flow becomes Alfvénic. We also show that, in the presence of strong flow shear, the tearing mode growth rate decreases with increasing background ion-to-electron temperature ratio, the opposite behaviour to the tearing mode without flow shear. We find that even a relatively small flow shear is enough to dramatically alter the scaling behaviour of the mode, because the growth rate is small compared with the shear flow across the ion scales (but large compared with shear flow across the electron scales). Our results may explain the relative absence of reconnection events in the near-Sun Alfvénic solar wind observed recently by NASA’s Parker Solar Probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

Determination of aerodynamic parameters of a fighter airplane from flight data at high angles of attack

A procedure for the estimation of airplane model structure and parameters is applied to data from a modern fighter airplane operating within an angle of attack range of 5 to 60 deg. The paper briefly describes the airplane, flight and wind tunnel data available, and the estimation method. The results presented contain basic longitudinal characteristics of the airplane and the estimates of aerodynamic parameters in the yawing-moment equations. These estimates are obtained from small and large amplitude maneuvers. Because the latter set of data was not suitable for airplane identification, some of the large amplitude maneuvers were joined together and then partitioned into subsets according to the values of angle of attack. Each subset was then analyzed as a separate data set. Most of the estimated parameters and functions are in good agreement with the wind tunnel measurements. The estimated lateral parameters in the model equations also demonstrate good prediction capabilities.

Klein, V.↗
NASA NTRS1993

Forebody vortex control on an F/A-18 using small, rotatable 'tip-strakes'

A mechanical scheme for manipulating the forebody vortices of an F/A-18, therefore creating controlled yawing moments at moderate and high angles of attack, was investigated in a wind tunnel. The technique consists of rotating miniature strakes (single or dual) about the radome centerline very close to the tip of the model. Forces, moments, and pressures were measured for angles of attack up to 60 deg and sideslip angles up to -10 deg. Results indicate that single and dual strakes can produce changes in side force and yawing moment, with magnitudes comparable to, or in some cases higher than, the directional changes produced by a 30-deg rudder deflection at 0-deg angle of attack. According to its circumferential position, the strake alters the separation location, inducing different degrees of asymmetry in the forebody vortex flow field that are translated into changes in side force and yawing moment. In comparison, the dual strakes appear to provide more gradual and better behaved changes than the single strake. Excellent correlation was found between this test and water tunnel tests performed on a similar configuration.

Suarez, Carlos J.↗
NASA NTRS1995

Test-particle simulations in increasingly strong turbulence

Quasi-linear theory supposes that the energy in resonant fluctuations is small compared to that in the mean magnetic field. This is evident in the fact that the zeroth-order particle trajectories are helices about a mean field B(sub o) that is spatially uniform over many correlation lengths. However, in the solar wind it is often the case that the fluctuating part of the field is comparable in magnitude to the mean part. It is generally expected that quasi-linear theory remains viable for particles that are in resonance with a region of the fluctuation spectrum having only small energy density, but even so, care must be taken when comparing simulations to theoretical predictions. We have performed a series of test-particle simulations to explore the evolution of ion distributions in turbulent situations with varying levels of magnetic fluctuations. As delta-B/B(sub o) is increased the distinctions among absolute pitch angle (defined relative to B(sub o)), local pitch angle (defined relative to B(x)), and magnetic moment become important, some of them exhibiting periodic sloshing unrelated to the nonadiabatic processes of interest. Comparing and contrasting the various runs illustrates the phenomena that must be considered when the premise underlying quasi-linear theory are relaxed.

Pontius, D. H., Jr.↗
NASA NTRS1980

Dynamic properties of the thermosphere inferred from Pioneer Venus mass spectrometer measurements

The data obtained by the Pioneer Venus spectrometer experiments indicate that the day-night temperature contrast on Venus is associated with wind velocities of about 200 m/s which transport oxygen, helium, and hydrogen toward the night side. A mass exchange with the mesosphere commensurate with an eddy diffusion coefficient of 3 x 10 to the 7th is required to buffer the horizontal advection so as to reproduce the observed day time bulge in oxygen and the small diurnal variations in helium. The observed time response and magnitude of the day-night density variations require transport processes to be effective over time periods between five and ten days, implying a superrotation rate or prevailing winds in excess of 50 m/s at the equator. Nonlinear mass transport results in wave steepening and contributes to the amplification of the density extrema in hydrogen and helium.

Mayr, H. G.↗
NASA NTRS1999

Development of a 5-Component Balance for Water Tunnel Applications

The principal objective of this research/development effort was to develop a multi-component strain gage balance to measure both static and dynamic forces and moments on models tested in flow visualization water tunnels. A balance was designed that allows measuring normal and side forces, and pitching, yawing and rolling moments (no axial force). The balance mounts internally in the model and is used in a manner typical of wind tunnel balances. The key differences between a water tunnel balance and a wind tunnel balance are the requirement for very high sensitivity since the loads are very low (typical normal force is 90 grams or 0.2 lbs), the need for water proofing the gage elements, and the small size required to fit into typical water tunnel models. The five-component balance was calibrated and demonstrated linearity in the responses of the primary components to applied loads, very low interactions between the sections and no hysteresis. Static experiments were conducted in the Eidetics water tunnel with delta wings and F/A-18 models. The data were compared to forces and moments from wind tunnel tests of the same or similar configurations. The comparison showed very good agreement, providing confidence that loads can be measured accurately in the water tunnel with a relatively simple multi-component internal balance. The success of the static experiments encouraged the use of the balance for dynamic experiments. Among the advantages of conducting dynamic tests in a water tunnel are less demanding motion and data acquisition rates than in a wind tunnel test (because of the low-speed flow) and the capability of performing flow visualization and force/moment (F/M) measurements simultaneously with relative simplicity. This capability of simultaneous flow visualization and for F/M measurements proved extremely useful to explain the results obtained during these dynamic tests. In general, the development of this balance should encourage the use of water tunnels for a wider range of quantitative and qualitative experiments, especially during the preliminary phase of aircraft design.

Suarez, Carlos J.↗
NASA NTRS2019

Quantification of CO2 and CH4 emissions over Sacramento, California, based on divergence theorem using aircraft measurements

Emission estimates of carbon dioxide (CO2) and methane (CH4) and the meteorological factors affecting them are investigated over Sacramento, California, using an aircraft equipped with a cavity ring-down greenhouse gas sensor as part of the Alpha Jet Atmospheric eXperiment (AJAX) project. To better constrain the emission fluxes, we designed flights in a cylindrical pattern and computed the emission fluxes from two flights using a kriging method and Gauss’s divergence theorem. Differences in wind treatment and assumptions about background concentrations affect the emission estimates by a factor of 1.5 to 7. The uncertainty is also impacted by meteorological conditions and distance from the emission sources. The vertical layer averaging affects the flux estimate, but the choice of raw wind or mass-balanced wind is more important than the thickness of the vertical averaging for massbalanced wind for both urban and local scales. The importance of vertical mass transfer for flux estimates is examined, and the difference in the total emission estimate with and without vertical mass transfer is found to be small, especially at the local scale. The total flux estimates accounting for the entire circumference are larger than those based solely on measurements made in the downwind region. This indicates that a closed-shape flight profile can better contain total emissions relative to a one-sided curtain flight because most cities have more than one point source and wind direction can change with time and altitude. To reduce the uncertainty of the emission estimate, it is important that the sampling strategy account not only for known source locations but also possible unidentified sources around the city. Our results highlight that aircraft-based measurements using a closed-shape flight pattern are an efficient and useful strategy for identifying emission sources and estimating local- and city-scale greenhouse gas emission fluxes.

Ju-Mee Ryoo↗
NASA NTRSDate not supplied

Seeding Mechanism for High-Pressure Nozzles

NASA tests new launch and entry vehicle configurations in wind tunnels, where flow visualizations and quantitative flow field measurements are often desired. Some of these vehicles have rocket motors for propulsion, retro-propulsion, or reaction control. Unseeded,high-pressure air is often used to simulate these rocket motor plumes. However, it is difficult to make off-body measurements in these regions, for several reasons. First, the plumes themselves are usually unseeded and at such low pressures that the flow velocity cannot currently be measured. Second, the plumes displace seeded tunnel air, preventing measurements such as laser sheet visualizations. Third, they force shock waves ahead of the vehicle, which melts the ice crystal fog commonly used for many visualization and measurement techniques. The Virginia Tech Advanced Propulsion and Power Lab has designed and tested a novel method for seeding the flow in these small-scale, high-pressure nozzles to allow quantitative measurement with a particle-based measurement such as particle image velocimetry (PIV). The method involves a Venturi contraction to draw the seed liquid out of a reservoir and into the nozzle channel, wherein shearing forces atomize the seed into particles. The concept was tested with a laser sheet visualization, which showed the nozzle spray pattern and the controllability of the seeding flow rate. This relatively inexpensive and simple technique may prove useful in wind tunnel experiments involving particle-based laser diagnostics and small, high-pressure nozzles.

particle image velocimetry↗
NASA NTRS1992

Multiple scattering in wind models of gamma-ray bursts

In wind models of gamma-ray bursts, it has been assumed that soft X-ray photons are scattered only once by relativistic electrons moving away from the star; this assumes that the scattering optical depth is small. Using the observational data from the bursts, we consider three methods for estimating this optical depth: (1) the luminosity of the burst, (2) the ratio of the gamma-ray flux (greater than 10 keV) to X-ray flux (less than 10 keV), and (3) the presence or lack of cyclotron lines. Within the context of the wind models, we find that multiple scattering is likely to be important in the formation of the spectrum in gamma-ray bursts.

Smith, I. A.↗
NASA NTRS2019

Eddy Compensation Dampens Southern Ocean Sea Surface Temperature Response to Westerly Wind Trends

Anthropogenic influences have led to a strengthening and poleward shift of westerly winds over the Southern Ocean (SO), especially during austral summer. We use observations, an idealized eddy‐resolving ocean‐sea ice channel model, and a global coupled model to explore the SO response to a step‐change in westerly winds. Previous work hypothesized a two timescale response for sea surface temperature. Initially, Ekman transport cools the surface before sustained upwelling causes warming on decadal timescales. The fast response is robust across our models and the observations: we find Ekman‐driven cooling in the mixed layer, mixing‐driven warming below the mixed layer, and a small upwelling‐driven warming at the temperature inversion. The long‐term response is inaccessible from observations. Neither of our models shows a persistent upwelling anomaly, or long‐term, upwelling‐driven subsurface warming. Mesoscale eddies act to oppose the anomalous wind‐driven upwelling, through a process known as eddy compensation, thereby preventing long‐term warming.

Southern Annular Mode↗
NASA NTRS2021

HaloSat Observations of Heliospheric Solar Wind Charge eXchange

X-ray emission from solar wind charge exchange (SWCX) produced in interplanetary space contaminates every astrophysical observation, regardless of the line-of-sight. Unfortunately, the primary SWCX emission lines also happen to be important diagnostics of astrophysical plasmas. Models of SWCX emission are limited by two main uncertainties: the local solar wind fluxes along the line-of-sight, and the charge exchange cross sections. The He cone, a localized density enhancement of helium neutrals, is the only heliospheric SWCX emission feature that is small enough and bright enough to be observationally isolated from the X-ray background and the broader SWCX emission. HaloSat, an X-ray CubeSat mission, has recently completed two series of specialized observations, near and far from the ecliptic plane, during two Earth transits of the He cone. These observations were used to test the predictions of a SWCX emission model against the emission observed at low ecliptic latitudes, where the solar wind data are monitored, and at high ecliptic latitudes, where the solar wind data are extrapolated. The measured SWCX emission for the set of observations near the ecliptic plane were consistent with the line intensities predicted by the model, but were underpredicted for the set of observations at high ecliptic latitude near the south ecliptic pole. Additionally, high temperature Galactic Halo emission components are reported for both spectral sets.

Solar Wind↗
NASA NTRS1993

WINDII, the wind imaging interferometer on the Upper Atmosphere Research Satellite

The WIND imaging interferometer (WINDII) was launched on the Upper Atmosphere Research Satellite (UARS) on September 12, 1991. This joint project, sponsored by the Canadian Space Agency and the French Centre National d'Etudes Spatiales, in collaboration with NASA, has the responsibility of measuring the global wind pattern at the top of the altitude range covered by UARS. WINDII measures wind, temperature, and emission rate over the altitude range 80 to 300 km by using the visible region airglow emission from these altitudes as a target and employing optical Doppler interferometry to measure the small wavelength shifts of the narrow atomic and molecular airglow emission lines induced by the bulk velocity of the atmosphere carrying the emitting species. The instrument used is an all-glass field-widened achromatically and thermally compensated phase-stepping Michelson interferometer, along with a bare CCD detector that images the airglow limb through the interferometer. A sequence of phase-stepped images is processed to derive the wind velocity for two orthogonal view directions, yielding the vector horizontal wind. The process of data analysis, including the inversion of apparent quantities to vertical profiles, is described.

Shepherd, G. G.↗
DOE OSTI2022

Effect of the J-Shaped Wind Turbine Airfoil Opening Ratio and Thickness on the Performance of Symmetrical Airfoils

Abstract In this work, the effect of the inner opening ratio on the J-shaped airfoils aerodynamic performance was studied and documented for symmetrical airfoils. Three different airfoil thicknesses were investigated: small (NACA0008), medium (NACA0015), and large (NACA0024). For each airfoil thickness, effects of three inner opening ratios were analyzed: one-third, one-half, and two-thirds. The performance of each opening ratio was compared with the performance of the solid airfoil “zero opening ratio” for different angles of attack between 5 deg and 20 deg. All designs were simulated using the computational fluid dynamics (CFD) technology against experimental results for solid NACA4412 airfoil in the University of Wisconsin-Milwaukee (UWM) wind tunnel facility and other published experimental data. It was found that large eddy simulation yields accurate solutions with a smaller number of mesh cells compared to the k–ω turbulence model but with much longer computational time. The lift-to-drag ratio for all studied airfoils has a maximum value for solid airfoils compared to those equipped with openings. For airfoils equipped with 00.00% opening ratio “solid,” NACA0015 airfoil has the maximum lift-to-drag ratio. Furthermore, it was found that NACA0008 equipped with a 33.33% opening ratio has the best performance of all studied J-shaped airfoils.

Energy & Fuels↗
NASA NTRS1975

Recent developments in dynamic stall

Tests were performed on an airfoil in a low-turbulence subsonic wind tunnel at fixed incidence for different speeds of the wind, the airfoil being in translatory motion normal or parallel to the wind. The resulting aerodynamic forces and moment on the airfoil were measured along with local pressure and skin friction. When the incidence is small and the boundary layer attached, no unsteady effects were observed. However, for a large incidence (16 deg), in the case of boundary layer separation, strong unsteady effects are revealed when the boundary layer is reattached in periodic flow. Reattachment can be explained assuming that for the same value of free stream velocity, the gradient of the modulus of the periodic component of the relative airspeed at the upper surface of the airfoil in a direction normal to this surface is greater than the gradient of the relative air speed at the upper surface when the airfoil is not oscillating.

Mccroskey, W. J.↗
NASA NTRS1981

A synoptic analysis of the first AVE-SESAME '79 period

Key features of a severe convection observed during April 10-11, 1979 as part of the Atmospheric Variability Experiment-Severe Environmental Storms and Mesoscale Experiment (AVE-SESAME) are examined. Three-hourly rawinsonde readings from 23 stations were taken, and vertical motion and divergence parameters are considered. The data were converted into a 127 km grid at the surface, and at 50 mb intervals from 900 mb to 100 mb by an objective analysis scheme, while a kinematic method was used to compute vertical motion. A weak upper tropospheric short wave trough was found to propagate from New Mexico into the Texas panhandle, while a jet maximum propagated eastward. The development of a strong wind maximum over Oklahoma and Kansas was associated with a rapid increase in upper-level divergence and the development of a small-scale pressure perturbation in the Texas panhandle, as well as a low-level jet and convergence, which led to rapid changes over the Red River Valley, where stability was decreased.

Moore, J. T.↗