SEARCH · Engineering Papers

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Bodies with noncircular cross sections and bank-to-turn missiles

An evaluation is made of prospective missile applications for noncircular cross section bodies, and of recent developments in bank-to-turn missile configuration aerodynamics. The discussion encompasses cross-flow analysis techniques, as well as study results obtained for bodies with elliptical and square cross sections and with variable cross sections. Attention is given to both the performance advantages and the stability and control problems of bank-to-turn missile configurations; the aerodynamic data presented for monoplanar configurations extend to those incorporating airbreathing propulsion systems.

Jackson, C. M., Jr.↗

NASA NTRS1987

Measurements of electron attachment lineshapes and cross sections at ultra-low electron energies for CF2Cl2, c-C4F6, c-C4F8 and c-C7F14

Electron-attachment cross sections are reported in the electron energy range 0-160 meV, and at energy resolutions of 7.0 and 7.5 meV (FWHM), for the molecules CF2Cl2 (dichlorodifluoromethane), c-C4F6 (perfluorocyclobutene), c-C4F8 (perfluorocyclobutane), and c-C7F14 (perfluoromethylcyclohexane). Use is made of the Kr photoionization method. Measured attachment lineshapes are deconvoluted from the spectral slit function, and are converted to cross sections by normalization through thermal attachment-rate constants. Comparisons are made with attachment cross sections derived from several independent sets of swarm-measured rate constants, and with collisional ionization (high-Rydberg attachment) data.

Chutjian, A.↗

NASA NTRS1987

Designing transonic wind-tunnel test sections for flow diagnostics and laser velocimeter applications

The design, fabrication, and validation of the Basic Aerodynamic Facility (BARF), developed for the direct comparison of three-dimensional laser velocimetry (LV) and hot-wire techniques at transonic speeds, are discussed. To accommodate the installation of the three-dimensional orthogonal LV system in the BARF, the transonic slots were redesigned to house windows, and the test section mounting was redesigned to facilitate LV transversing. Two-dimensional and three-dimensional code validation tests of the LV test section showed uniform mean flow through the test section to sonic speeds, and fluctuating pressure measurements at subsonic speeds which are consistent with facilities with good flow quality.

Jones, G. S.↗

NASA NTRS1985

Turbine Engine Hot Section Technology, 1985

The Turbine Engine Section Technology (HOST) Project Office of the Lewis Research Center sponsored a workshop to discuss current research pertinent to turbine engine hot section durability problems. Presentations were made concerning hot section environment and the behavior of combustion liners, turbine blades, and turbine vanes.

Source record↗

NASA NTRS1988

Recent advances in high temperature instrumentation for hot section applications

Programs to develop research instrumentation for use in turbine engine hot sections are described. These programs were initiated to provide improved measurements capability as support for a multidisciplinary effort to establish technolgy leading to improved hot section durability. Specific measurement systems described here include heat flux sensors, a dynamic gas temperature measuring system, laser anemometry for hot section applications, an optical system for viewing the interior of a combustor during operation, thin film sensors for surface temperature and strain measurements, and high temperature strain measuring systems. The paper describes the state of the development of these sensors and measuring systems and, in some cases, will show examples of measurements made with this instrumentation.The paper covers work done at the NASA Lewis Research Center and at various contract and grant facilities.

Propulsion instrumentation↗

NASA NTRS1988

Structural Analysis Methods Development for Turbine Hot Section Components

This paper summarizes the structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine Hot Section Technology (HOST) program. The technologies synergistically developed and validated include: time-varying thermal/mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first time three-dimensional nonlinear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

High-temperature↗

NASA NTRS1987

Temperature dependence of the ozone absorption cross section at the 253.7-nm mercury line

The temperature dependence of the ozone absorption cross section at 253.7 nm has been measured between 195 and 351 K. The experimental technique employed circumvents the necessity to determine the absolute ozone concentration for each temperature measurement. Below 273 K the cross section increases approximately 0.6 percent, while toward higher temperatures the cross section decreases rapidly. In a comparison, good agreement with other recently made measurements is shown.

Barnes, J.↗

NASA NTRS1987

The Jamestown Ophiolite Complex, Barberton mountain belt - A section through 3.5 Ga oceanic crust

The Jamestown Ophiolite Complex of the Barberton greenstone belt, South Africa, is investigated, and the intrusive nature of mafic-ultramafic units from the Komati and Kromberg formations into overlying pillow lavas and sediments is documented. Evidence is presented for multiple intrusive events within the igneous sections, including crosscutting intrusives, multiple injection of magma in the Komati section, and sheeted intrusions in the Kromberg section. The thinness of the Jamestown complex suggests that, locally at least, the ca 3.5 Ga oceanic crust was also thin, consistent with the regionally extensive metasomatic alteration.

De Wit, Maarten J.↗

NASA NTRS1988

Absolute absorption cross-section measurements of ozone in the wavelength region 238-335 nm and the temperature dependence

The absolute absorption cross-section of ozone has been experimentally determined at the temperatures 195, 228, and 295 K at several discrete wavelengths in the 238-335-nm region. The present results for ozone at 295 K are found to be in agreement with those of Hearn (1961). Absolute cross-section measurements of ozone at 195 K have confirmed previous (Freeman et al., 1984) relative cross-section measurements throughout the 240-335-nm region.

Yoshino, K.↗

NASA NTRS1988

Vibrational-excitation cross sections of water molecules by electron impact

A crossed-beam technique was used to measure absolute differential cross sections for the vibrational excitation of water-vapor molecules. The energy and angular range were from 2.2 to 20 eV and from 30 to 150 deg. Vibrational-excitation cross sections were determined for the bending (010) and stretching (100 and 001) modes of the electronic ground state. It is shown that the integral cross sections are generally larger than those of Seng and Linder (1976) by 10-20 percent for both the bending and stretching modes. It is noted that the results obtained are of interest in connection with the theoretical modeling of cometary ionospheres.

Shyn, T. W.↗

NASA NTRS1988

Advanced high temperature instrumentation for hot section research applications

Programs to develop research instrumentation for use in turbine engine hot sections are described. These programs were initiated to provide improved measurements capability as support for a multidisciplinary effort to establish technology leading to improved hot section durability. Specific measurement systems described here include heat flux sensors, a dynamic gas temperature measuring system, laser anemometry for hot section applications, an optical system for viewing the interior of a combustor during operation, thin film sensors for surface temperature and strain measurements, and high temperature strain measuring systems. The paper will describe the state of development of these sensors and measuring systems and, in some cases, will show examples of measurements made with this instrumentation. The paper covers work done at the NASA Lewis Research Center and at various contract and grant facilities.

Englund, D. R.↗

NASA NTRS1988

Structural analysis methods development for turbine hot section components

The structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine Hot Section Technology (HOST) Program are summarized. The technologies synergistically developed and validated include: time-varying thermal/mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first-time 3-D nonlinear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

Thompson, R. L.↗

NASA NTRS1989

Advanced high temperature instrument for hot section research applications

Programs to develop research instrumentation for use in turbine engine hot sections are described. These programs were initiated to provide improved measurements capability as support for a multidisciplinary effort to establish technology leading to improved hot section durability. Specific measurement systems described here include heat flux sensors, a dynamic gas temperature measuring systems, laser anemometry for hot section applications, an optical system for viewing the interior of a combustor during operation. Thin film sensors for surface temperature and strain measurements, and high temperature strain measuring systems. The paper will describe the state of development of these sensors and measuring systems and, i n some cases, will show examples of measurements made with this instrumentation. The paper covers work done a t the NASA Lewis Research Center and at various contract and grant facilities.

D R Englund↗

NASA NTRS1989

Structural analysis methods development for turbine hot section components

This paper summarizes the structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine Hot Section Technology (HOST) program. The technologies synergistically developed and validated include: mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first-time three-dimensional non-linear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

R L Thompson↗

NASA NTRS1988

Mineralogy and phase-chemistry of the Cretaceous/Tertiary section in the Lattengebirge, Bavarian Alps

The Lattengebirge K/T section reveals three distinct Ir spikes. Two of them are contained in the K/T transition zone sensu-strictu termed clayey interval, with 4.4 ppb Ir at the actual K/T boundary, and 2.8 ppb Ir 10 cm above the boundary. The highest Ir enrichment of 9 ppb, however, was detected in semi-cleaned organic material from a thin sandstone layer of Upper Maastrichtian age at 16 cm below the boundary. In this layer various discernible phases are preserved, contrasting with the worldwide observed K/T transition zones which are generally entirely composed of diagenetically altered materials. Given that, important clues to understanding the Cretaceous terminal events may be provided. The phases of the Cretaceous Ir bearing layer at Lattengebirge consist of: sandstone fragmental minerals in a carbonate matrix, coal which is partly burnt, melt glasses presumably of combustion-metamorphic origin, and sulfides, mainly chalcopyrite, contained in the coal. Like many known K/T sections and the Lattengebirge boundary sensu-strictu, the Cretaceous horizon is enriched in Ir and chalcophile elements as well. Although the Lattengebirge section offers the freshest materials, including melt glasses, of all K/T localities investigated, no unequivocal evidence of formation by impact has been found there.

Graup, G.↗

NASA NTRS1988

Cross sections for the dissociative attachment of electrons to NO

Cross sections for the production of O(-) by electron attachment to NO are reported. It is found that the maximum value of the cross section is about 52 percent higher than the measurement of Rapp and Briglia (1965). Cross sections for the process of polar dissociation, e + NO yields N(+) + O(_), have also been measured, and the threshold energy for this process has been obtained.

Krishnakumar, E.↗

NASA NTRS1988

Total photoionization cross sections of atomic oxygen from threshold to 44.3 A

Synchrotron radiation was used to obtain the relative photoionization cross section of atomic oxygen for the production of singly charged ions over the 44.3-910.5-A wavelength range. Measurement of the contribution of multiple ionization to the cross sections has made possible the determination of total photoionization cross sections below 250 A. The series of autoionizing resonances leading to the 4P state of the oxygen ion has been observed using an ionization-type experimental procedure for the first time.

Angel, G. C.↗

NASA NTRS1988

Electron attachment lineshapes, cross sections and rate constants at ultra-low energies in several halomethyl and haloethyl molecules

Electron attachment lineshapes, cross sections and rate constants are reported for the molecules CH2Br2, CF2Br2, CF3Br, CBrCl3, BrCN, C2H2Br4, CH3l, C2H5l and 1,1,1,-C2Cl3F3. Use is made of the krypton photoionization method. In addition, the signal intercomparison technique is used to obtain individual channel cross sections and rate constants for Br(-) and CN(-) formation from BrCN, and for Br(-) and Br2(-) formation from CF2Br2. Present results in 1,1,1,-C2Cl3F3 using a new ion extraction grid geometry are compared with earlier results, and differences discussed in terms of the electric field equipotentials of two extraction systems used in the present work. Approximate potential energy curves for BrCN are presented, and the temperature dependence of the Br(-) channel cross section discussed.

Alajajian, S. H.↗