Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reference models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigations of LHW-plasma coupling and current drive at high density related to H-mode experiments in EAST

Two important issues in achieving lower hybrid current drive (LHCD) high confinement plasma in EAST are to improve lower hybrid wave (LHW)-plasma coupling and to drive the plasma current at a high density. Studies in different configurations with different directions of toroidal magnetic field (Bt) show that the density near the antenna is affected by both the radial electric field induced by plasma without a LHW (Er-plasma) in the scrape off layer (SOL), and the radial electric field induced by LHW power (Er-LH) near the grill. Investigations indicate that Er× Btin the SOL leads to a different effect of configuration on the LHW-plasma coupling and Er-LH× Btaccounts for the asymmetric density behaviour in the SOL observed in the experiments, where Eris the total radial electric field in the SOL. Modelling of parametric instability (PI), collisional absorption (CA) and scattering from density fluctuations (SDF) in the edge region, performed considering the parameters of high density LHCD experiments in EAST, has shown that these mechanisms could be responsible for the low current drive (CD) efficiency at high density. Radiofrequency probe spectra, useful for documenting PI occurrence, show sidebands whose amplitude in the case of the lithiated vacuum chamber is smaller than in the case of poor lithiation, consistently with growth rates from PI modeling of the respective reference discharges. Since strong lithiation is also expected to diminish the parasitic effect on the LHCD of the remaining possible mechanisms, this appears to be a useful method for improving LHCD efficiency at a high density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1963

LUNAR POINT-TO-POINT COMMUNICATION

Ground wave propagation over an atmosphereless, lunar surface model is studied, with reference to point-to-point communication systems on the moon

POINT-TO-POINT COMMUNICATION↗
NASA NTRS1974

GEOS observation systems intercomparison investigation results

The results of an investigation designed to determine the relative accuracy and precision of the different types of geodetic observation systems used by NASA is presented. A collocation technique was used to minimize the effects of uncertainties in the relative station locations and in the earth's gravity field model by installing accurate reference tracking systems close to the systems to be compared, and by precisely determining their relative survey. The Goddard laser and camera systems were shipped to selected sites, where they tracked the GEOS satellite simultaneously with other systems for an intercomparison observation.

Berbert, J. H.↗
NASA NTRS1974

Analysis of the interaction of a weak normal shock wave with a turbulent boundary layer

The method of matched asymptotic expansions is used to analyze the interaction of a normal shock wave with an unseparated turbulent boundary layer on a flat surface at transonic speeds. The theory leads to a three-layer description of the interaction in the double limit of Reynolds number approaching infinity and Mach number approaching unity. The interaction involves an outer, inviscid rotational layer, a constant shear-stress wall layer, and a blending region between them. The pressure distribution is obtained from a numerical solution of the outer-layer equations by a mixed-flow relaxation procedure. An analytic solution for the skin friction is determined from the inner-layer equations. The significance of the mathematical model is discussed with reference to existing experimental data.

Melnik, R. E.↗
NASA NTRS1975

The effect of intermediate-scale motions on line formation

The problem of LTE and non-LTE line formation in the presence of nonthermal velocity fields with geometric scales between the microscopic and macroscopic limits is investigated in the cases of periodic sinusoidal and sawtooth waves. For a fixed source function (the LTE case), it is shown that time-averaged line profiles progress smoothly from the microscopic to the macroscopic limits as the geometric scale of the motions increases, that the sinusoidal motions produce symmetric time-averaged profiles, and that the sawtooth motions cause a redshift. In several idealized non-LTE cases, it is found that intermediate-scale velocity fields can significantly increase the surface source functions and line-core intensities. Calculations are made for a two-level atom in an isothermal atmosphere for a range of velocity scales and non-LTE coupling parameters and also for a two-level atom and a four-level representation of Na I line formation in the Harvard-Smithsonian Reference Atmosphere (1971) solar model. It is found that intermediate-scale velocity fields in the solar atmosphere could explain the central intensities of the Na I D lines and other strong absorption lines without invoking previously suggested high electron densities.

Shine, R. A.↗
NASA NTRS1977

Proceedings of the Spacecraft Charging Technology Conference: Executive Summary

Aerospace environments are reviewed in reference to spacecraft charging. Modelling, a theoretical scheme which can be used to describe the structure of the sheath around the spacecraft and to calculate the charging currents within, is discussed. Materials characterization is considered for experimental determination of the behavior of typical spacecraft materials when exposed to simulated geomagnetic substorm conditions. Materials development is also examined for controlling and minimizing spacecraft charging or at least for distributing the charge in an equipotential manner, using electrical conductive surfaces for materials exposed to space environment.

Pike, C. P.↗
NASA NTRS1979

Large eddy simulation - A predictive approach to turbulent flow computation

The filtering approach (Leonard, 1974) to large eddy simulation is described. Large eddy simulation is then surveyed with reference to subgrid scale models, numerical methods, channel flow, and free shear flows. It is concluded that the premise of LES (i.e., that the small eddies are much easier to model than the large ones) seems to be borne out by computational experience to date. The greatest obstacle in LES at present is the lack of computer power which effectively denies the ability to simulate all the significant eddies in flows of interest.

Ferziger, J. H.↗
NASA NTRS1980

Evaluation of computing systems using functionals of a Stochastic process

An intermediate model was used to represent the probabilistic nature of a total system at a level which is higher than the base model and thus closer to the performance variable. A class of intermediate models, which are generally referred to as functionals of a Markov process, were considered. A closed form solution of performability for the case where performance is identified with the minimum value of a functional was developed.

Meyer, J. F.↗
NASA NTRS1982

Comparison of candidate IGRF models

Three candidate models for the International Geomagnetic Reference Field (IGRF) for the years 1965, 1970, 1975, and 1980 are evaluated using magnetic observatory and satellite data. The models were submitted by the USGS, the IGS, and NASA. Comparison based on annual means data shows the differences between models to be small, although the NASA model appears slightly more accurate in 1965 and 1975 and the IGS model in 1970. Evaluation with Magsat scalar and vector satellite data at 1980 shows the USGS and NASA models to be of comparable accuracy, while the IGS model displays larger residuals. The NASA model best represents the scalar POGO data at 1965 and 1970. Contoured differences between the models in components X, Y, Z, and F at the earth's surface at 1965, 1970, 1975 and 1980 are displayed and discussed.

Langel, R. A.↗
NASA NTRS1982

The containment set approach to digital system tolerance of lightning-induced transient faults

A fault model and a system model are necessary to assess the tolerance or resilience of a digital system to lightning-induced transients. It is noted that these models are usually developed separately. A new approach is outlined here for this assessment problem which combines the fault and system models into an overall model. With this approach, referred to as the containment set approach, an assessment of the effects of lightning-induced transients can be made in terms of a state transition matrix. This matrix can be generated by means of fault injection experiments. In addition, certain nonredundancy-oriented design alternatives to the achievement of lightning-induced transient tolerance in digital systems are indicated by the containment set approach.

Masson, G. M.↗
NASA NTRS1983

Further isotopic studies of heavy nuclei in the 9/23/78 solar flare

The isotopes considered range from He to Mg (Z from 2 to 12). A more accurate value of the Ne-22/Ne-20 ratio is obtained by extending the energy interval for isotope analysis. A significant difference persists between the Ne-22/Ne-20 ratio in this flare and that for the solar wind. How the sun can apparently emit two distinct isotopic components remains a question. Although relatively little is known about the solar wind isotopic composition, it does not appear that the solar wind isotopes have been altered by a simple mass-dependent fractionation process. Reference is made to models that have been proposed which might produce selective enhancements.

Mewaldt, R. A.↗
NASA NTRS1984

Experimental determination of the partitioning of gallium between solid iron metal and synthetic basaltic melt Electron and ion microprobe study

The distribution of Ga between solid Fe metal and synthetic basaltic melt is investigated experimentally at temperatures of 1190 and 1330 C, and over a narrow range of oxygen fugacities. Metal-silicate reversal experiments were conducted, indicating a close approach to equilibrium. The analysis of the partitioned products was performed using electron and ion microprobes. At one bar total pressure, the solid metal/silicate melt partition coefficient D(Ga) is used to evaluate metal-silicate fractionation processes in the earth, moon, and Eucrite Parent Body (EPB). It is found that the depletion of Ga abundances in the EPB is due to the extraction of Ga into a metallic core. Likewise, the depletion of Ga in the lunar mantle is consistent with the extraction of Ga into a smaller lunar core if Ga was originally present in a subchondritic concentration. The relatively high Ga abundances in the earth's mantle are discussed, with reference to several theoretical models.

Drake, M. J.↗
NASA NTRS1985

Static internal performance of a single-engine onaxisymmetric-nozzle vaned-thrust-reverser design with thrust modulation capabilities

An investigation has been conducted at wind-off conditions in the stati-test facility of the Langley 16-Foot Transonic Tunnel. The tests were conducted on a single-engine reverser configuration with partial and full reverse-thrust modulation capabilities. The reverser design had four ports with equal areas. These ports were angled outboard 30 deg from the vertical impart of a splay angle to the reverse exhaust flow. This splaying of reverser flow was intended to prevent impingement of exhaust flow on empennage surfaces and to help avoid inlet reingestion of exhaust gas when the reverser is integrated into an actual airplane configuration. External vane boxes were located directly over each of the four ports to provide variation of reverser efflux angle from 140 deg to 26 deg (measured forward from the horizontal reference axis). The reverser model was tested with both a butterfly-type inner door and an internal slider door to provide area control for each individual port. In addition, main nozzle throat area and vector angle were varied to examine various methods of modulating thrust levels. Other model variables included vane box configuration (four or six vanes per box), orientation of external vane boxes with respect to internal port walls (splay angle shims), and vane box sideplates. Nozzle pressure ratio was varied from 2.0 approximately 7.0.

Leavitt, L. D.↗
NASA NTRS1987

Aerofoil testing in a self-streamlining flexible walled wind tunnel

Two-dimensional self-streamlining flexible walled test sections eliminate, as far as experimentally possible, the top and bottom wall interference effects in transonic aerofoil testing. The test section sidewalls are rigid, while the impervious top and bottom walls are flexible and contoured to streamline shapes by a system of jacks, without reference to the aerofoil model. The concept of wall contouring to eliminate or minimise test section boundary interference in two-dimensional testing was first demonstrated by the National Physical Laboratory (NPL) in England during the early 1940's. The transonic streamlining strategy proposed, developed and used by NPL has been compared with several modern strategies. The NPL strategy has proved to be surprisingly good at providing a wall interference-free test environment, giving model performance indistinguishable from that obtained when using the modern strategies over a wide range of test conditions. In all previous investigations the achievement of wall streamlining in flexible walled test sections has been limited to test conditions up to those which result in the model's shock just extending to a streamlined wall. This work, however, has also successfully demonstrated the feasibility of two-dimensional wall streamlining at test conditions where both model shocks have reached and penetrated through their respective flexible walls. Appropriate streamlining procedures have been established and are uncomplicated, enabling flexible walled test sections to easily cope with these high transonic flows.

Mark Charles Lewis↗
NASA NTRS1988

The small molecular cloud toward HD 169454

Optical absorption line observations of the B1 supergiant HD 169454 reveal the presence of an intervening translucent interstellar cloud. Millimeter wavelength observations of CO emission show that the absorption lines can be attributed to a well-defined cloud approximately 18 by 22 min in extent at the same radial velocity as the C2 and CN absorption lines. The map of the CO emission shows three large condensations and evidence of unresolved structure on smaller scales. Various procedures for determining the cloud mass are compared. The estimated mass is 7-14 M solar masses if the cloud lies at the distance (D about 125 pc) of an extended atomic cloud at the same radial velocity, and is 250-500 M solar masses if the kinematic distance (D about 750 pc) is adopted. The dynamical state of the cloud is examined. The composition and structure of the cloud are discussed with reference to detailed theoretical models and the properties of other interstellar clouds.

Jannuzi, Buell T.↗
NASA NTRS1989

Interstellar C2, CH, and CN in translucent molecular clouds

Optical absorption-line techniques have been applied to the study of a number of translucent molecular clouds in which the total column densities are large enough that substantial molecular abundances can be maintained. Results are presented for a survey of absorption lines of interstellar C2, CH, and CN. Detections of CN through the A 2Pi-X 2Sigma(+) (1,O) and (2,O) bands of the red system are reported and compared with observations of the violet system for one line of sight. The population distributions in C2 provide diagnostic information on temperature and density. The measured column densities of the three species can be used to test details of the theory of molecule formation in clouds where photoprocesses still play a significant role. The C2 and CH column densities are strongly correlated with each other and probably also with the H2 column density. In contrast, the CN column densities are found to vary greatly from cloud to cloud. The observations are discussed with reference to detailed theoretical models.

Black, John H.↗
NASA NTRS1993

Theoretical studies in interstellar cloud chemistry

This final report represents the completion of the three tasks under the purchase order no. SCPDE5620,1,2F. Chemical composition of gravitationally contracting, but otherwise quiescent, interstellar clouds and of interstellar clouds traversed by high velocity shocks, were modeled in a comprehensive manner that represents a significant progress in modeling these objects. The evolutionary chemical modeling, done under this NASA contract, represents a notable advance over the 'classical' fixed condition equilibrium models because the evolutionary models consider not only the chemical processes but also the dynamical processes by which the dark interstellar clouds may have assumed their present state. The shock calculations, being reported here, are important because they extend the limited chemical composition derivable from dynamical calculations for the total density and temperature structures behind the shock front. In order to be tractable, the dynamical calculations must severely simplify the chemistry. The present shock calculations take the shock profiles from the dynamical calculations and derive chemical composition in a comprehensive manner. The results of the present modeling study are still to be analyzed with reference to astronomical observational data and other contemporary model predictions. As far as humanly possible, this analysis will be continued with CRE's (Creative Research Enterprises's) IR&D resources, until a sponsor is found.

Chiu, Y. T.↗