Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radiometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Analysis of the Vertical Temperature Profile Radiometer (VTPR) radiometric problem

Variations in bias radiation, on the detector as a function of scan mirror position, are reported for the VTPR instruments presently in orbit. Tests in the laboratory show that this bias radiation disappears when optical baffles are added. A detailed analysis explains quantitatively the observed bias variation which is due to the extraneous field-of-view of the detector, and the variation in magnitude of the far field-of-view solid angle as a function of mirror position.

Goldberg, I. L.↗

Sensitivity of Josephson-effect millimeter-wave radiometer

The noise temperature and the minimum detectable temperature of a Josephson junction in video detection of microwave and millimeter-wave radiation has been calculated. We use the well-known method based on a Fokker-Planck equation. The noise temperature can be very close to ambient temperature. Because its predetection bandwidth is very wide, a Josephson-effect radio telescope receiver can have a minimum detectable temperature better than that of a traveling-wave maser.

Ohta, H.↗

Preliminary results of the Apollo 17 infrared scanning radiometer

The thermal emission of the lunar surface has been mapped by an infrared scanner from lunar orbit. Samples from approximately 250,000 scans reveal the full range of lunar temperatures from 80 to 400 K. The temperature resolution was 1 K with about plus or minus 2 K absolute precision. Spatial resolution was approximately 2 km over most of the horizon-to-horizon scan. The total mapped area amounted to approximately 30% of the lunar surface. The data currently available confirms the large population of nighttime thermal anomalies in western Oceanus Procellarum predicted by earth-based observations. Most of these 'hot spots' are associated with fresh impact features or boulder fields. Also seen in the data are 'cold spots' where the local nighttime temperature is depressed relative to the general soil background. Such regions exhibiting low surface conductivity are inferred to be relatively young, nonimpact features.

Mendell, W. W.↗

Limb radiance inversion radiometer

Engineering and scientific objectives of the LRIR experiment are described along with system requirements, subassemblies, and experiment operation. The mechanical, electrical, and thermal interfaces between the LRIR experiment and the Nimbus F spacecraft are defined. The protoflight model qualification and acceptance test program is summarized. Test data is presented in tables to give an overall view of each test parameter and possible trends of the performance of the LRIR experiment. Conclusions and recommendations are included.

Drozewski, R. W.↗

The development of an L-band radiometer dual-mode horn

An antenna was developed for the remote microwave measurement of ocean surface temperature during a flight test in a C54 aircraft. The basic antenna is a conical dual-mode horn similar to the dual-mode horn described by Potter (1963). The pertinent internal dimensions of the horn are given. The measured E and H plane patterns for the linearly polarized horn for a range of frequencies are shown in a graph.

Bailey, M. C.↗

Self-calibrating radiometer

Instrument has differential thermocouples that measure temperature on two sides of receiver; one side is heated by absorbed radiation, the other by resistance heater. By measuring energy required to heat back surface, amount of energy absorbed on front may be determined.

Dimeff, J.↗

Temperature reference for microwave radiometer calibration

New temperature reference avoids need to physically remove antenna and replace it with calibrating termination. Device is piece of porous microwave absorber fitted with cap of nonporous plastic foam. Absorbent material is soaked with cryogen. Procedure ensures that temperature at which microwaves are absorbed is exactly that of cryogen.

Love, A. W.↗

Design data collection with Skylab microwave radiometer-scatterometer S-193, volume 2

The author has identified the following significant results. Skylab S-193 radiometer/scatterometer produced terrain responses with various polarizations and observation angles for cells of 100 to 400 sq km area. Classification of the observations into natural categories was achieved by K-means and spatial clustering algorithms. Microwave data acquired over the Great Salt Lake Desert area by sensors aboard Skylab and Nimbus 5 indicate that the microwave emission and backscatter were strongly influenced by contributions from subsurface layers of sediment saturated with brine. Correlations were noted between microwave backscatter response at approximately 33 deg from scatterometer (operating at 13.9 GHz) and the configuration of ground targets in Brazil as discerned from coarse scale maps. With limited, available ground truth, these correlations were sufficient to permit the production of image-like displays which bear a marked resemblance to known terrain features in several instances.

Moore, R. K.↗

The measurement of the winds near the ocean surface with a radiometer-scatterometer on Skylab

The author has identified the following significant results. There were a total of twenty-six passes in the ZLV mode that yielded useful data. Six were in the in-track noncontiguous mode; all others were in the cross-track noncontiguous mode. The wind speed and direction, as effectively determined in a neutral atmosphere at 19.5 m above the sea surface, were found for each cell scanned by S193. It is shown how the passive microwave measurements were used both to compute the attenuation of the radar beam and to determine those cells where the backscatter measurement was suspect. Given the direction of the wind from some independent source, with the typical accuracy of measurement by available meteorological methods, a backscatter measurement at a nadir angle of 50, 43, or 32 deg can be used to compute the speed of the wind averaged over the illuminated area.

Pierson, W. J.↗

Mariner 10 infrared radiometer results - Temperatures and thermal properties of the surface of Mercury

Mariner 10 infrared brightness temperatures of the surface of Mercury at 11 and 45 microns are presented. The data were obtained during the first flyby along a near-equatorial swath extending from 17 hours local time through local midnight to 9 hours local time. For an assumed emissivity of 0.9, derived surface thermal inertias are between 0.0015 and 0.0031 cal/sq cm/sq root sec/K and the implied minimum predawn surface kinetic temperature for the warm pole at longitude 270 deg is near 93 K. Several pronounced thermal inhomogeneities were seen, one of which appears to coincide with a region of high radar reflectivity. The derived thermal properties, the electrical skin depth, and loss tangent fall within the range of values found on the moon.

Chase, S. C., Jr.↗

Noise adding radiometer improvement

Simple computer software modification compensates for nonideal detector characteristics to provide improved system performance.

Gardner, R. A.↗

Null-balancing microwave radiometer

Device performs absolute temperature measurements over range of 0 to 300 degrees Kelvin. Stability of device approaches 0.1 degrees Kelvin. Potential uses include detecting oil slicks on water and determining cloud water content and water vapor content of atmosphere.

Hardy, W. N.↗

Support of the infrared radiometer on the ST

The aim was to obtain practical experience, including observational experience, with bolometers suitable for the long wave infrared and with the filters necessary to define the spectral regions of interest. The techniques used in fabricating and testing bolometers and filters are described, and the results which were obtained to date are discussed.

Neugebauer, G.↗

Techniques for obtaining regional radiation budgets from satellite radiometer observations, phase 4 and phase 5

A scheme was developed which divides the earth-atmosphere system into 2060 elemental areas. The regions previously described are defined in terms of these elemental areas which are fixed in size and position as the satellite moves. One method, termed the instantaneous technique, yields values of the radiant emittance (We) and the radiant reflectance (Wr) which the regions have during the time interval of a single satellite pass. The number of observations matches the number of regions under study and a unique solution is obtained using matrix inversion. The other method (termed the best fit technique), yields time averages of We and Wr for large time intervals (e.g., months, seasons). The number of observations in this technique is much greater than the number of regions considered, and an approximate solution is obtained by the method of least squares.

Pina, J. F.↗

Calibration target for temperature radiometer

Technique measures temperature/voltage drop characteristics of very thin filament. With constant current running through filament, voltage drop is recorded at various temperatures, as measured by calibrated thermocouple.

Edwards, S. F.↗