Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Nanoscale TiO 2 coating improves water stability of Cs 2 SnCl 6

To improve the stability of Cs 2 SnCl 6 under aqueous/moisture environments, we applied a concept of artificial passivation by depositing a protective TiO 2 coating of 10 nm on the surface of Cs 2 SnCl 6 . Static leaching experiments results indicate that the initial release rates of Cs + and Cl - are decreased by 20–30 times with TiO 2 coating, suggesting its possibility to improve the short-term water/environmental stability of Cs 2 SnCl 6 . An amorphous-to-crystalline phase transition in TiO 2 film was observed, possibly resulting in degradation of Cs 2 SnCl 6 . However, the crystalline TiO 2 film still remains after 21 days water exposure and can still act as an effective passivation layer to reduce the release rates of Cs + and Cl - by as much as about 17 and 7 times, respectively, relative to static leaching without artificial coatings. Therefore, the water/environmental stability of metal halide perovskite Cs 2 SnCl 6 , which is a highly soluble molecular salt, can be enhanced by the nanoscale TiO 2 coating as an artificial passivation film.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Greigite (Fe 3 S 4 ) is thermodynamically stable: Implications for its terrestrial and planetary occurrence

Significance The new experimental thermodynamic studies of bulk, nanophase, and monoclinic high-pressure forms of greigite (Fe 3 S 4 ) confirm its stability in the Fe–S system and explain its common occurrence in sediments, magnetotactic bacteria, and other ambient temperature environments under anoxic conditions. The data disprove the commonly held hypothesis that greigite is a metastable phase. The low surface energy of greigite provides insight not only into the stability of greigite nanoparticles but also into their role in prebiotic, biological, and planetary processes. Our experimental data for the stability of the three forms of Fe 3 S 4 confirm that it could be stable on Mercury, thus contributing to Mercury’s weak magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Impact of Sintering Atmosphere and Temperature on the Phase Evolution of High Surface Area LSCF Prepared by In Situ Carbon Templating

The thermochemical stability of lanthanum strontium cobalt ferrite (LSCF) processed between 1000 °C–1200 °C via the in situ carbon templating method was studied. This method generates high surface area ceramics at traditional solid oxide fuel cell (SOFC) sintering temperatures by generating a carbon template in situ and subsequently removing the template by oxidation at 700 °C. Argon processed samples produced an amorphous carbon template, whereas nitrogen tended to form graphitic carbon. Prior to the oxidation step, nitrogen samples comprised larger La 2 O 3 crystallites (22–40 nm) compared to argon (9–17 nm). Upon oxidation, argon samples resulted in a pure LSCF phase with surface areas in the 21–29 m 2 ·g −1 range, whereas nitrogen samples contained significant impurities. This demonstrates that the size of La 2 O 3 crystallites formed during inert processing limited the ability to produce a pure LSCF phase. Symmetrical cells comprising nano-LSCF electrodes generated by the templating method were compared to cells sintered directly in air. Impedance results suggest that nano-LSCF cells and cells processed in air were dominated by interfacial charge transfer resistance and gas diffusion, respectively. The results map out conditions for preparing and integrating high surface area, nanostructured LSCF into SOFC electrodes at traditional sintering temperatures. Strategies for improving the interfacial resistance of nano-LSCF electrodes are discussed.

Muhoza, Sixbert P. (ORCID:0000000299864241)↗
DOE OSTI2025

Remote Influence of Andean Convection on Amazonian Rainfall and Its Mechanisms

Models from Coupled Model Intercomparison Project Phase 6 produce too much precipitation over the Andes but too little over the Amazon or the Wet Andes-Dry Amazon (WADA) bias pattern. Unlike the conventional view that convection parameterization and land model deficiencies can contribute to Amazonian rainfall biases, we approach this long-standing biased model behavior through the lens of Andean convection. Using Community Earth System Model v1.1 and focusing on the wet season, our mechanism-denial experiments demonstrate that Andean convection notably reduces precipitation over the Amazon during austral summer. The Andean forced Amazonian response operates on weather timescale. Furthermore, the reduction of Amazonian rainfall is detectable within a few hours after initial Andean forcing. The precipitation response is primarily driven by variations in the moisture budget and is moderated by changes in convective available potential energy over the Amazon. Changes in the total advection of moisture over the Amazon are dominated by the vertical advection term and can be attributed to discrepancies in the dynamic omega field. In the experiments, the Andean east flank region is scrutinized where the vertical velocity and moisture fields play an intermediary role for the Andean driven WADA connection. The Andean forcing induces descending anomalies on the Andean east flank. The disturbances of wind and geopotential fields over the Andean east flank propagate eastward via Kelvin waves. Over the Amazon, descending anomalies and advective drying lead to reduction of mid-to-high level cloud, increase of shortwave cloud forcing and surface net radiation, and enhancement of themodynamic stability and rainfall reduction.

58 GEOSCIENCES↗
DOE OSTI2020

Towards understanding and predicting the hydronium ion catalyzed dehydration of cyclic-primary, secondary and tertiary alcohols

The varying steric environment of zeolites subtly influences the rates of hydronium-ion-catalyzed dehydration of alcohols containing a cyclohexyl group in aqueous phase. Here, the investigated primary, secondary, and tertiary alcohols show an increasing stabilization of an ionic transition state in this sequence, i.e., an increasing tendency to move from a concerted (E2 mechanism) to a stepwise dehydration (E1 mechanism). Hydronium ions confined in the micropores of MFI and BEA zeolites induced much higher catalyzed rates than those in the aqueous phase. Independent of the reaction mechanism and the environment, however, all alcohols investigated follow one compensation correlation between activation enthalpy and entropy for primary, secondary, and tertiary alcohols, respectively. For a given transition enthalpy, the rate of dehydration is the higher the larger the reaction space (translated to the reaction entropy). Surprisingly, all compensation relations intersect in one point. These dependences for the different alcohols are also reflected in the turnover rates, for which all alcohols also intersect in a common point, which appears to mark the highest reaction rate for dehydration catalyzed by hydronium ions at the investigated temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural stability, dihydrogen bonding, and pressure-induced polymorphic transformations in hydrazine borane

Hydrazine borane (N 2 H 4 BH 3 ) has attracted considerable interest as a promising solid-state hydrogen storage material owing to its high hydrogen content and easy preparation. In this work, pressure-induced phase transitions of N 2 H 4 BH 3 were investigated using a combination of vibrational spectroscopy, X-ray diffraction, and density functional theory (DFT) up to 30 GPa. Our results showed that N 2 H 4 BH 3 exhibits remarkable structural stability in a very broad pressure region up to 15 GPa, and then two phase transitions were identified: the first one is from the ambient-pressure Pbcn phase to a Pbca phase near 15 GPa; the second is from the Pbca phase to a Pccn phase near 25 GPa. As revealed by DFT calculations, the unusual stability of N 2 H 4 BH 3 and the late phase transformations were attributed to the pressure-mediated evolutions of dihydrogen bonding frameworks, the compressibility and the enthalpies of the high-pressure polymorphs. In conclusion, our findings provide new insight into the structures and bonding properties of N 2 H 4 BH 3 that are important for hydrogen storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impedance Modeling and Stability Analysis for the PLL-less and Voltage Sensor-less Grid-tied Converters

The newly developed control methodology, which omits the phase-locked loop (PLL) and voltage sensor, has garnered considerable attention for its rapid dynamic response and reduced hardware expenses. Nonetheless, its stability concerns have not yet been thoroughly scrutinized. In this paper, the impedance modeling of the PLL-less and voltage sensorless control strategy has been established. The impedance model has been contrasted with the traditional PLL-based control scheme. Our findings demonstrate that the PLL-less and voltage sensorless control approach lacks the negative resistance behavior that is frequently observed in the traditional scheme, which results in unstable operations. Furthermore, the role of virtual resistance has been examined. To substantiate the aforementioned findings, simulation results are presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Direct Optical Lithography of Colloidal Metal Oxide Nanomaterials for Diffractive Optical Elements with 2π Phase Control

Spatially patterned dielectric materials are ubiquitous in electronic, photonic, and optoelectronic devices. These patterns are typically made by subtractive or additive approaches utilizing vapor-phase reagents. On the other hand, recent advances in solution-phase synthesis of oxide nanomaterials have unlocked a materials library with greater compositional, microstructural, and interfacial tunability. However, methods to pattern and integrate these nanomaterials in real-world devices are less established. In this work, we directly optically pattern oxide nanoparticles (NPs) by mixing them with photosensitive diazo-2-naphthol-4-sulfonic acid and irradiating with widely available 405 nm light. We demonstrate the direct optical lithography of ZrO 2 , TiO 2 , HfO 2 , and ITO NPs and investigate the chemical and physical changes responsible for this photoinduced decrease in solubility. Micron-thick layers of amorphous ZrO 2 NPs were patterned with micron resolution and shown to allow 2 pi phase control of visible light. We also show multilayer patterning and use it to fabricate features with different thicknesses and distinct structural colors. Upon annealing at 400 degrees C, the deposited ZrO 2 structures have excellent optical transparency across a wide wavelength range (0.3-10 mu m), a high refractive index (n = 1.84 at 633 nm), and are optically smooth. We then fabricate diffractive optical elements, such as binary phase diffraction gratings, that show efficient diffractive behavior and good thermal stability. Different oxide NPs can also be mixed prior to patterning, providing a high level of material tunability. This work demonstrates a general patterning approach that harnesses the processability and diversity of colloidal oxide nanomaterials for use in photonic applications.

2𝜋 phase shift↗
DOE OSTI2022

Influence of voids on the thermal and light stability of perovskite solar cells

The formation of voids in perovskite films close to the buried interface has been reported during film deposition. These voids are thought to limits the efficiency and stability of perovskite solar cells (PSCs). Here, we studied the voids formed during operation in perovskite films that were optimized during the solution deposition process to avoid voids. New voids formed during operation are found to assemble along grain boundaries at the bottom interface, caused by the loss of residual solvent and conversion of amorphous phase to crystalline phase. Unexpectedly, the formation of these voids did not negatively affect the stability of PSCs. Decreasing the amorphous region in perovskites by thermal annealing decreased the positive iodide interstitial density, and improved the light stability of PSCs. The annealed devices maintained 90% of their initial efficiency and light soaking for 1900 hours at open circuit condition under 1-sun illumination at 50°C.

14 SOLAR ENERGY↗
DOE OSTI2024

Reentrant polar phase induced by the ferroionic coupling in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles

Using the model of four sublattices, the Landau-Ginzburg-Devonshire-Kittel phenomenological approach and the Stephenson-Highland ionic adsorption model for the description of coupled polar and antipolar long-range orders in ferroics, we analytically calculated the phase diagrams and polar properties of B⁢i 1−𝑥 ⁢S⁢m 𝑥⁢ Fe⁢O 3 nanoparticles covered by surface ions with dependence on their size, surface ions density, samarium content 𝑥 , and temperature. The size effects and ferroionic coupling govern the appearance and stability conditions of the long-range ordered ferroelectric, reentrant ferrielectric, and antiferroelectric phases in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles. Calculated phase diagrams are in qualitative agreement with the x-ray diffraction phase analysis, electron paramagnetic resonance, infrared spectroscopy, and electrophysical measurements of B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanopowders sintered by the solution combustion method. The combined theoretical-experimental approach allows us to explain the influence of the ferroionic coupling and size effects in B⁢i 1−𝑥 ⁢S⁢m 𝑥 ⁢Fe⁢O 3 nanoparticles on their polar properties.

antiferroelectricity↗
DOE OSTI2021

Kinetically stabilized ferroelectricity in bulk single-crystalline HfO 2 :Y

HfO 2 , a simple binary oxide, exhibits ultra-scalable ferroelectricity integrable into silicon technology. This material has a polymorphic nature, with the polar orthorhombic (Pbc2 1 ) form in ultrathin films regarded as the plausible cause of ferroelectricity but thought not to be attainable in bulk crystals. In this work, using a state-of-the-art laser-diode-heated floating zone technique, we report the Pbc2 1 phase and ferroelectricity in bulk single-crystalline HfO 2 :Y as well as the presence of the antipolar Pbca phase at different Y concentrations. Neutron diffraction and atomic imaging demonstrate (anti)polar crystallographic signatures and abundant 90°/180° ferroelectric domains in addition to switchable polarization with negligible wake-up effects. Density-functional-theory calculations indicate that the yttrium doping and rapid cooling are the key factors for stabilization of the desired phase in bulk. Our observations provide insights into the polymorphic nature and phase control of HfO 2 , remove the upper size limit for ferroelectricity and suggest directions towards next-generation ferroelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Phase Diagram of a Deep Potential Water Model

Using the Deep Potential methodology, we construct a model that reproduces accurately the potential energy surface of the SCAN approximation of density functional theory for water, from low temperature and pressure to about 2400 K and 50 GPa, excluding the vapor stability region. The computational efficiency of the model makes it possible to predict its phase diagram using molecular dynamics. Satisfactory overall agreement with experimental results is obtained. Here, the fluid phases, molecular and ionic, and all the stable ice polymorphs, ordered and disordered, are predicted correctly, with the exception of ice III and XV that are stable in experiments, but metastable in the model. The evolution of the atomic dynamics upon heating, as ice VII transforms first into ice VII" and then into an ionic fluid, reveals that molecular dissociation and breaking of the ice rules coexist with strong covalent fluctuations, explaining why only partial ionization was inferred in experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Salt-Induced Polymorphs Observed in Colloidal Single Crystals

Polymorphs are solid materials with the same chemical composition but different crystallographic structures. A unique aspect of polymorphs is that they exhibit different physical properties, such as solubility, melting point, density, color, hardness, and bioavailability. Here, we synthesized polymorphs of colloidal crystals engineered with DNA by slow-cooling gold nanoparticle-core programmable atom equivalents (PAEs, particles with DNA sequences that control their bonding characteristics) under salt concentrations ranging from 0.5 to 4 M NaCl. This approach yielded a diverse set of single-crystalline phases with cubic, tetragonal, and hexagonal lattice symmetries. The structural transitions observed here arise solely from the modulation of interparticle repulsion via ionic strength and thermal processing. Notably, in certain cases, we observed diffusionless phase transformations, wherein the superlattices evolve from cubic to lower-symmetry tetragonal lattices. By tuning the thermal stability and salt concentration, we captured intermediate, metastable body-centered tetragonal structures during the slow-cool process, indicating that subtle changes in free energy can direct crystallization to low-symmetry phases. In conclusion, this study demonstrates that thermal and ionic parameters can be tuned to access and stabilize colloidal crystal polymorphs with emergent structures and interesting functional properties.

Colloidal crystallization↗
DOE OSTI2023

Theoretical understanding of stability of the oxygen electrode in a proton-conductor based solid oxide electrolysis cell

The oxygen electrode in a proton-conductor based solid oxide cells is often a triple-conducting material that enables the transport and exchange of electrons (e - ), oxygen ions (O 2- ), and protons (H + ), thus expanding active areas to enhance the oxygen electrode activity. In this work, a theoretical model was developed to understand stability of tri-conducting oxygen electrode by studying chemical potentials of neutral species (i.e., μ o 2 , μ H 2 , and μ H 2 O ) as functions of transport properties, operating parameters, and cell geometry. Our theoretical understanding shows that (1): In a conventional oxygen-ion based solid oxide cell, a high μ o 2 (thus high oxygen partial pressure) exists in the oxygen electrode during the electrolysis mode, which may lead to the formation of cracks at the electrode/electrolyte interface. Further, while in a proton-conductor based solid oxide cell, the μ o 2 is reduced significantly, suppressing the crack formation, and resulting in improved performance stability (2). In a typical proton-conductor based solid oxide electrolyzer, the dependence of μ o 2 on the Faradaic efficiency is negligible. Hence, approaches to block the electronic current can improve the electrolysis efficiency while achieving stability (3). The difference of the μ o 2 (thus p o 2 ) between the oxygen electrode and gas phase can be reduced by using higher ionic conducting components and improving electrode kinetics, which lead to further improvement of electrode stability.

08 HYDROGEN↗
DOE OSTI2024

Fast Oxygen Redox Kinetics Induced by CoO 6 Octahedron With π –Interaction in P2–Type Sodium Oxides

Enhancing the kinetics of lattice oxygen redox (LOR) in P2-type layered sodium oxide cathodes is crucial for the advancement of sodium-ion batteries (SIBs) with superior energy and power densities. Electronic structure regulation stands out as a highly effective approach to address the inherent limitations of P2-type layered oxides with LOR, including sluggish kinetics, phase transitions, voltage hysteresis, and local structural distortion. In this work, a strategy involving the introduction of CoO 6 octahedra with π-interaction into Na 0.6 Li 0.1 Fe 0.3–x Co x Mn 0.6 O 2 (x = 0, 0.15, 0.3) cathodes to facilitate Na-ion transport is proposed. Furthermore, the impact of FeO 6 octahedra with σ-interaction in P2-type cathodes on electrochemical performance is comprehensively investigated. Through multimodal in-situ and ex-situ characterization techniques, it is revealed that Co–O with π-interaction effectively mitigates P2-OP4 phase transitions by strengthening Na–O, reduces voltage hysteresis, and stabilizes the local structure. Consequently, Na 0.6 Li 0.1 Co 0.3 Mn 0.6 O 2 demonstrates enhanced Na-ion diffusion kinetics, leading to improved rate performance and a reversible capacity of 55 mAh g –1 at 10 C, significantly outperforming cathodes with Fe–O σ-interaction. Moreover, when coupled with hard carbon, the full cell achieves a remarkable energy density of 395 Wh kg –1 (on cathode) at 0.1 C, with a capacity retention of 75% over 100 cycles at 1 C.

25 ENERGY STORAGE↗
DOE OSTI2022

Gluon-mediated inclusive Deep Inelastic Scattering from Regge to Bjorken kinematics

We revisit high energy factorization for gluon mediated inclusive Deep Inelastic Scattering (DIS) for which we propose a new semi-classical approach that accounts systematically for the longitudinal extent of the target in contrast with the shockwave limit. In this framework, based on a partial twist expansion, we derive a factorization formula that involves a new gauge invariant unintegrated gluon distribution which depends explicitly on the Feynman x variable. It is shown that both the Regge and Bjorken limits are recovered in this approach. We reproduce in particular the full one loop inclusive DIS cross-section in the leading twist approximation and the all-twist dipole factorization formula in the strict x = 0 limit. Although quantum evolution is not discussed explicitly in this work, we argue that the proper treatment of the x dependence of the gluon distribution encompasses the kinematic constraint that must be imposed on the phase-space of gluon fluctuations in the target to ensure stability of small-x evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Vacancy-mediated complex phase selection in high entropy alloys

Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy x-ray diffraction, single-crystal x-ray diffraction, and KKR-CPA electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computationally assessed to ascertain the composition-dependent phase selection, as increased Al content often acts as a stabilizer of a body-centered-cubic structure. Equiatomic TiZrHfAl was especially interesting due to its observed bcc superstructure – a variant of γ-brass with 4 vacancies per cell (not 2 as in γ-brass). We highlight how vacancy ordering mediates selection of this variant of γ-brass, which is driven by vacancy-atom SRO that dramatically suppress all atomic SRO. As vacancies are inherent in processing refractory systems, we expect that similar discoveries await in other high entropy alloys or in revisiting older experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Carbon sequestration of steel slag and carbonation for activating RO phase

Carbonation of Ca/Mg minerals in industrial alkaline residues is a technology to sequester CO{sub 2} and reduce its emissions to the atmosphere. In this work, BSE-EDS were used to determine the mineral phase in steel slag; compositions of RO phase were identified and simulated. The carbon sequestration of steel slag was studied, and RO phase was activated by carbonation. Result shows that the amount of CO{sub 2} sequestered in steel slag and RO phase increases as carbonation time increases. Under autoclaving condition, the hydration ratio of MgO in RO phase was 20.10%. Through carbonation, up to 58.83% of MgO in RO phase can be converted into MgCO{sub 3}, and the activation of RO phase by carbonation was manifested. The mechanical properties and volume stability of carbonated steel slag were improved, proving that the positive effect of carbonation on steel slag when applied in cement and cementitious materials.

36 MATERIALS SCIENCE↗