Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Atomic-scale friction control by vibration using friction force microscope

Manipulation of friction at the nanoscale has been traditionally approached by chemical means (lubrication). Recent friction force microscopy (FFM) experiments demonstrated that it can be done mechanically by applying vibration to accessible elements of the system. This paper provides analytic understanding on why vibration can reduce friction based on a 1D model imitating the FFM tip moving on a substrate. Open-loop stability is first studied, and a feedback vibration control is then designed using the accessible variable. Comparing to the open-loop system, friction force is significantly reduced in the closed-loop system. Numerical simulations show satisfactory performances.

Guo, Yi↗

The microscopic mechanisms of high temperature oxidation of Haynes 282

Nickel-based superalloy finds widespread applications in aerospace and extreme environments. They are known for their high temperature oxidation resistance under extended periods. However, the oxide formation and evolution which sets the stages for the later parabolic oxidation kinetics is not fully understood. This paper aims to provide new insights into the transient stage oxidation mechanism and kinetics of a typical Ni-based superalloy (Haynes 282). While tracking the chemical and microstructural evolution under micrometer scale at 800°C, we show that the oxide scale and its grain boundary species change significantly during the initial stages of oxidation and can have a profound impact on the oxidation kinetics. Cr 2 O 3 forms initially at the grain boundary along with minor amount of Al 2 O 3 . Then, the grain boundary region is enriched with copious amounts TiO 2 while Cr migrates away from the grain boundary. A noticeable change in the isothermal oxidation kinetics observed likely results from a mechanistic change from uniform surface oxidation to preferential outward diffusion of Ti 4+ ions through the grain boundary. Through first-principles calculations combined with energy dispersive spectroscopy, we confirmed the preferential outward diffusion of Ti 4+ ions as the diffusion barrier is lower for Ti than Cr along the grain boundaries. In conclusion, these findings highlight the critical role of early-stage grain boundary oxidation dynamics in dictating the long-term oxidation resistance of Ni-based superalloys and provide a foundation for future strategies to enhance their performance in extreme environments.

DFT↗

The Eukaryotic Replisome Goes Under the Microscope

The machinery at the eukaryotic replication fork has seen many new structural advances using EM and crystallography. Recent structures of eukaryotic replisome components include the Mcm2-7 complex, the CMG helicase, DNA polymerases, a Ctf4 trimer hub and the first look at a core replisome of 20 different proteins containing the helicase, primase, leading polymerase and a lagging strand polymerase. The eukaryotic core replisome shows an unanticipated architecture, with one polymerase sitting above the helicase and the other below. Additionally, structures of Mcm2 bound to an H3/H4 tetramer suggest a direct role of the replisome in handling nucleosomes, which are important to DNA organization and gene regulation. This review provides a summary of some of the many recent advances in the structure of the eukaryotic replisome.

59 BASIC BIOLOGICAL SCIENCES↗

From ammonium Hexahalorhenates(IV) to nanocrystalline rhenium metal: A combined thermal, diffraction and microscopic analysis

Rhenium metal powder is a material of industrial importance. Several industrial and laboratory methods have been developed for the preparation of ultrafine Re metal powder and nanoparticles. The present study provides a better understanding of the characteristic and formation of Re metal powder from the decomposition of (NH4)2ReX6 salt (X = F, Cl, Br, I) at high temperature in inert atmosphere. Such analysis resulted in the formation of nanocrystalline Re metal as characterized by powder XRD. Williamson-Hall, Scherrer, and Williamson-Smallman methods were employed to study the effect of crystallize size, lattice strain, and dislocation density as analyzed from powder XRD peak broadening. Here, the morphology and composition of the metal were analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy.

36 MATERIALS SCIENCE↗

Microscopic and Macroscopic Tumor and Parenchymal Effects of Liver Stereotactic Body Radiotherapy

Purpose: To describe the histologic and volumetric changes in normal liver tissue after stereotactic body radiotherapy (SBRT) for liver metastases. Methods and Materials: Pre- and post-SBRT imaging studies were analyzed to evaluate the effect of SBRT on normal liver volume (NLV) in 15 patients treated in a prospective clinical trial. Two other patients underwent exploratory surgery after SBRT and histologic analyses of the irradiated liver were performed to characterize the pathologic effects of SBRT. Results: In the 15 patients studied quantitatively, the total NLV had decreased transiently at 2-3 months after SBRT and then began to regenerate at 3-8 months after SBRT. The median NLV reduction at the maximal observed effect was 315 cm{sup 3} (range, 125-600) or 19% (range, 13-33%). Among the several dosimetric parameters evaluated, the strongest linear correlation was noted for the NLV percentage receiving 30 Gy as a predictor of maximal NLV reduction (r{sup 2} = 0.72). The histologic changes observed 2 and 8 months after SBRT demonstrated distinct zones of tissue injury consistent with localized veno-occlusive disease. Conclusion: The well-demarcated focal parenchymal changes after liver SBRT (demonstrated both radiographically and histologically) within the high-dose zone are consistent with a threshold dose-induced set of phenomena. In contrast, the more global effect of NLV reduction, which is roughly proportional to whole organ dose parameters, resembles more closely an effect determined from radiobiologically parallel architecture. These observations suggest that modeling of normal tissue effects after liver SBRT might require different governing equations for different classes of effects.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Removal of Arsenic from Water Using Granular Ferric Hydroxide: Macroscopic and Microscopic Studies

Removal of arsenate from water using granular ferric hydroxide (GFH) was investigated under different pH and As(V) loading conditions, using batch equilibrium adsorption, FTIR, and EXAFS methods. The arsenate adsorption envelopes on GFH exhibited broad adsorption maxima when the initial As(V) concentration was less than 500 mg/L at sorbent concentration of 10 g/L. As the initial As(V) concentration increased to 500, 1000 or 2000 mg/L for the same sorbent concentration, distinct adsorption maxima appeared and shifted to lower pH. Acidimetric-alkalimetric titration and arsenic adsorption isotherm data indicated that the surface of GFH is high heterogeneous. FTIR spectra revealed that complexes of two different structures, bidentate and monodentate, were formed upon the adsorption of arsenate on GFH, and bidentate complexes were only observed at pH values greater than 6. The EXAFS analyses confirmed that arsenate form bidentate binuclear complexes with GFH at pH 7.4 as evidenced by an average Fe-As(V) bond distance of 3.32 Angstroms.

54 ENVIRONMENTAL SCIENCES↗

Multistage bioassociation of uranium onto an extremely halophilic archaeon revealed by a unique combination of spectroscopic and microscopic techniques

The interactions of two extremely halophilic archaea with uranium were investigated in this paper at high ionic strength as a function of time, pH and uranium concentration. Halobacterium noricense DSM-15987 and Halobacterium sp. putatively noricense, isolated from the Waste Isolation Pilot Plant repository, were used for these investigations. The kinetics of U(VI) bioassociation with both strains showed an atypical multistage behavior, meaning that after an initial phase of U(VI) sorption, an unexpected interim period of U(VI) release was observed, followed by a slow reassociation of uranium with the cells. By applying in situ attenuated total reflection Fourier-transform infrared spectroscopy, the involvement of phosphoryl and carboxylate groups in U(VI) complexation during the first biosorption phase was shown. Differences in cell morphology and uranium localization become visible at different stages of the bioassociation process, as shown with scanning electron microscopy in combination with energy dispersive X-ray spectroscopy. Finally, our results demonstrate for the first time that association of uranium with the extremely halophilic archaeon is a multistage process, beginning with sorption and followed by another process, probably biomineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A microscopic and crystallographic study of proton irradiated alloy 718

Solution annealing and age hardening are important processes for achieving good engineering and chemical properties of alloy 718. The composition of alloy 718 also plays an important role as it can affect both mechanical (γ”- and γ’-phase formation) and irradiation behaviors. Therefore, in this study five different sets of alloy 718 samples with two different chemical compositions were fabricated using different processing conditions and irradiated up to 4 dpa. Based on the effects of irradiation on the microstructural data of γ”- and γ’-phases, irradiation-induced dislocation statistics, and crystallographic data, it can be inferred that the samples processed at high solution annealing temperature (1093°C) behave better under irradiation compared to the samples processed at low solution annealing temperatures (945 and 1065°C).

36 MATERIALS SCIENCE↗