Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

High-Temperature Neutron Diffraction Study of Vanadium and Vanadium–Niobium Null-Matrix Alloy for Spectrum Normalization

This study systematically evaluates a vanadium–niobium (V 94.1 Nb 5.9 ) null-matrix alloy as a reference material for neutron spectrum normalization and compares its performance with that of pure vanadium under identical experimental conditions. Neutron diffraction experiments are conducted on the VULCAN Engineering Materials Diffractometer at the Spallation Neutron Source, Oak Ridge National Laboratory, over a temperature range from room temperature to 1200 °C under vacuum. Pure vanadium exhibited distinct Bragg peaks across all temperatures, with its diffraction behavior influenced by both sample orientation and temperature. As the temperature increased, the diffraction peaks shifted to larger d-spacings and decreased in intensity, while spectral deviation near d ≈ 2.8 Å exceeded 10% at 1200 °C. In contrast, the V–Nb alloy produced a nearly featureless spectrum over the full d-spacing range, confirming near-complete cancellation of coherent scattering over the wide temperature range. Its spectra were insensitive to sample orientation, temperature, and microstructural evolution, with spectral deviation around d ≈ 2.8 Å exceeded 5% at 1200 °C. In conclusion, these results demonstrate that the V–Nb null-matrix alloy provides a thermally stable, efficient, and reliable normalization standard for time-of-flight diffractometers or other instrument where it is needed, enabling reduced data acquisition time and improved data quality in high-temperature neutron diffraction experiments.

Alloys↗

Covariance Matrix of a Double-Differential Doppler-broadened Elastic Scattering Cross Section

Legendre moments of a double-differential Doppler-broadened elastic neutron scattering cross section on {sup 238}U are computed near the 6.67 eV resonance at temperature T = 10{sup 3} K up to angular order 14. A covariance matrix of these Legendre moments is computed as a functional of the covariance matrix of the elastic scattering cross section. A variance of double-differential Doppler-broadened elastic scattering cross section is computed from the covariance of Legendre moments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the S-Matrix of the Faddeev-Reshetikhin Model

The Faddeev-Reshetikhin model arises as a truncation of strings in AdS{sub 5}xS{sup 5}. Its two particle S-matrix should be obtained by diagonalizing its Hamiltonian. However this does not happen in a straightforward way. There is a Lorentz violating term in the Hamiltonian which prevents its plain diagonalization. We then find out the most general quartic Hamiltonian that can be diagonalized. It includes the bosonic Thirring model as well as another model which shares the same two particle S-matrix as the Faddeev-Reshetikhin model. We also find a one-parameter family of interactions which lead to non-hermitian Hamiltonians which have unitary S-matrices and are PT symmetric.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Matrix Characterization in Threat Material Detection Processes

Matrix characterization in the threat material detection is of utmost importance, it generates the background against which the threat material signal has to be identified. Threat materials (explosive, chemical warfare, ...) are usually contained within small volume inside large volumes of variable matrices. We have studied the influence of matrix materials on the capability of neutron systems to identify hidden threat material. Three specific scenarios are considered in some details: case 1--contraband material in the sea containers, case 2 - explosives in soil (landmines), case 3 - explosives and chemical warfare on the sea bottom. Effects of container cargo material on tagged neutron system are seen in the increase of gamma background and the decrease of neutron beam intensity. Detection of landmines is more complex because of variable soil properties. We have studied in detail space and time variations of soil elemental compositions and in particular hydrogen content (humidity). Of special interest are ammunitions and chemical warfare on the sea bottom, damping sites and leftovers from previous conflicts (WW-I, WW-II and local). In this case sea sediment is background source and its role is similar to the role of the soil in the landmine detection. In addition to geochemical cycling of chemical elements in semi-enclosed sea, like the Adriatic Sea, one has to consider also anthropogenic influence, especially when studying small scale variations in concentration levels. Some preliminary experimental results obtained with tagged neutron sensor inside an underwater vehicle are presented as well as data on sediment characterization by X-Ray Fluorescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

R-matrix calculations along sequences: photoionization and electron-impact excitation

As computer power continues to increase, so does our ability to carry out extensive, non-perturbative calculations of atomic processes. Much work has been done on increasing the target representation of complex systems in step with advances in computational power. However there is also a need for coverage in terms of atomic data used in astrophysical or fusion plasma modeling. In this talk, we discuss recent R-matrix calculations of electron-impact excitation and photoionization over iso-electronic sequences. While automation of R-matrix codes and data analysis are reviewed, the talk is focused on iso-electronic trends observed in the data. Specifically, we show the effect that resonant enhancement and level mixing can have on expected iso-electronic trends.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quadrupolar correlations and deformation effects on nuclear transition matrix elements of double-{beta} decay

The effect of quadrupolar correlations vis-a-vis deformation on the nuclear transition matrix elements of two neutrino and neutrinoless {beta}{beta} decay is studied in the PHFB model. It is observed that the deformation effects scale almost similarly for both the two neutrino and neutrinoless {beta}{beta} decay modes and the independent deformations of initial and final nuclei are important parameters to describe the nuclear transition matrix elements for different modes of {beta}{beta} decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Damping mechanisms in alumina borate whisker-reinforced-aluminum matrix composites with or without SnO{sub 2} coatings

SnO{sub 2} was successfully coated on the surface of alumina borate whiskers. The pure aluminum matrix composites reinforced with a SnO{sub 2}-coated alumina borate whisker were fabricated by squeeze casting. The effects of coating contents on the damping properties of the coated composites at various temperatures, frequencies, and strain amplitudes were examined. The microstructures of the coated composites were also investigated through transmission electron microscopy observations. These results indicate that the introduction of Sn at the interface between whisker and matrix in the coated composites during the squeeze casting process alters not only the interface structures but also the dislocation status of the matrices in the vicinity of the interface. The results of damping characterization indicate that the damping capacities of the coated composites strongly depend on the coating contents and strain amplitudes. A damping peak at low temperatures appeared not only in the coated composites but also in the noncoated one, which is related to dislocation motion and interfacial slip caused by Sn. A damping peak at high temperatures appeared only in the coated composites, and the damping mechanisms at high temperature change with the increase in strain amplitudes. Sn played an important role on the damping mechanisms of the coated composites all along.

36 MATERIALS SCIENCE↗

Novel formulations of CKM matrix renormalization

We review two recently proposed on-shell schemes for the renormalization of the Cabibbo-Kobayashi-Maskawa (CKM) quark mixing matrix in the Standard Model. One first constructs gauge-independent mass counterterm matrices for the up- and down-type quarks complying with the hermiticity of the complete mass matrices. Diagonalization of the latter then leads to explicit expressions for the CKM counterterm matrix, which are gauge independent, preserve unitarity, and lead to renormalized amplitudes that are non-singular in the limit in which any two quarks become mass degenerate. One of the schemes also automatically satisfies flavor democracy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of Binder in Iron Matrix Composites

The ability to use iron and its alloys as the matrix material in composite systems is of great importance because it is the most widely used metallic material with a variety of commercially available steel grades [1]. The aim of this study is to investigate the influence of binder in particulate iron based metal matrix composites. There are four types of binder that were used in this study; Stearic Acid, Gummi Arabisch, Polyvinyl alcohol 15000 MW and Polyvinyl alcohol 22000 MW. Six different weight percentage of each binder was prepared to produce the composite materials using powder metallurgy (P/M) route; consists of dry mixing, uniaxially compacting at 750 MPa and vacuum sintering at 1100 deg. C for two hours. Their characterization included a study of density, porosity, hardness and microstructure. Results indicate that MMC was affected by the binder and stearic acid as a binder produced better properties of the composite.

36 MATERIALS SCIENCE↗

Third generation biosensing matrix based on Fe-implanted ZnO thin film

Third generation biosensor based on Fe-implanted ZnO (Fe-ZnO) thin film has been demonstrated. Implantation of Fe in rf-sputtered ZnO thin film introduces redox center along with shallow donor level and thereby enhance its electron transfer property. Glucose oxidase (GOx), chosen as model enzyme, has been immobilized on the surface of the matrix. Cyclic voltammetry and photometric assay show that the prepared bioelectrode, GOx/Fe-ZnO/ITO/Glass is sensitive to the glucose concentration with enhanced response of 0.326 {mu}A mM{sup -1} cm{sup -2} and low Km of 2.76 mM. The results show promising application of Fe-implanted ZnO thin film as an attractive matrix for third generation biosensing.

36 MATERIALS SCIENCE↗

Formation of void lattice after annealing of Ge quantum dot lattice in alumina matrix

We report on the formation of a regularly ordered void lattice with a void size of about 4 nm in an alumina matrix. The voids were formed by thermal treatment of a well-ordered three-dimensional Ge quantum dot lattice formed earlier by self-assembled growth in an alumina matrix during magnetron sputtering codeposition of Ge+Al{sub 2}O{sub 3}. During the subsequent annealing the germanium atoms were lost from the film and so voids were produced. The positions of the voids are ordered in the same way as the Ge quantum dots that were present before annealing, while their sizes can be controlled by the deposition parameters.

36 MATERIALS SCIENCE↗

Quantum-statistical T-matrix approach to line broadening of hydrogen in dense plasmas

The electronic self-energy {Sigma}{sup e} is an important input in a quantum-statistical theory for spectral line profile calculations. It describes the influence of plasma electrons on bound state properties. In dense plasmas, the effect of strong, i.e. close, electron-emitter collisions can be considered by three-particle T-matrix diagrams. These digrams are approximated with the help of an effective two-particle T-matrix, which is obtained from convergent close-coupling calculations with Debye screening. A comparison with other theories is carried out for the 2p level of hydrogen at k{sub B}T = 1 eV and n{sub e} = 2{center_dot}10{sup 23} m{sup -3}, and results are given for n{sub e} = 1{center_dot}10{sup 25} m{sup -3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al

Although particle reinforced metal matrix composites possess excellent physical properties, its machining performance is rather bad because of its specific structure. It is difficult to obtain good cutting effect by traditional machining method. So machining has become the bottleneck which strictly restricts its industry application. This paper mainly focuses on both wear characteristics of different tool materials and material removal mechanism in ultrasonic milling high volume fraction particle reinforced metal matrix composites SiCp/Al. An acoustic device for ultrasonic vibration milling was developed to introduce the ultrasonic vibration into the traditional machining process. Through the contrast experiment of traditional milling and ultrasonic vibration milling SiCp/Al, the mechanism of tool wear and characteristics of surface topography were analyzed. The experimental results showed that the surface integrity and tool life in the ultrasonic vibration milling SiCp/Al were improved.

36 MATERIALS SCIENCE↗

Laplacians in polar matrix coordinates and radial fermionization in higher dimensions

We consider the quantum mechanical Hamiltonian of two, space indexed, Hermitian matrices. By introducing matrix valued polar coordinates, we obtain the form of the Laplacian acting on invariant states. For potentials depending only on the eigenvalues of the radial matrix, we establish that the radially invariant sector is equivalent to a system of noninteracting 2 + 1 dimensional fermions and obtain its density description. For a larger number of matrices, the presence of a repulsive radial intereigenvalue potential is identified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The uses of the refined matrix model recursion

We study matrix models in the {beta}-ensemble by building on the refined recursion relation proposed by Chekhov and Eynard. We present explicit results for the first {beta}-deformed corrections in the one-cut and the two-cut cases, as well as two applications to supersymmetric gauge theories: the calculation of superpotentials in N=1 gauge theories, and the calculation of vevs of surface operators in superconformal N=2 theories and their Liouville duals. Finally, we study the {beta}-deformation of the Chern-Simons matrix model. Our results indicate that this model does not provide an appropriate description of the {Omega}-deformed topological string on the resolved conifold, and therefore that the {beta}-deformation might provide a different generalization of topological string theory in toric Calabi-Yau backgrounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Electric Field Alignment of MWCNT in PMMA Matrix for Hydrogen Gas Purification

The composite membranes of multi-walled carbon nanotube (MWCNT) and polymethylmethacrylate (PMMA) were prepared by solution cast method. The MWCNT was dispersing a very low concentration (0.1 wt %) in PMMA matrix. Alignment of MWCNT in PMMA matrix has been performed by inducing a DC electric field at different voltage parameter varying from 350 V/cm to 1250 V/cm. The MWCNT/PMMA composites were characterized by gas permeation and electrical measurement before and after electric field alignment. The effect of electric field alignment has been studied on gas permeation measurements for gas purification applications. These measurements indicate the enhancement in gas permeability due to the aligned of MWCNT in PMMA matix as compare to randomly dispersed MWCNT. I-V characteristics measurement also indicates that aligned MWCNT/PMMA composite membrane exhibits electron tunneling conductivity.

36 MATERIALS SCIENCE↗

Matrix representation of the time operator

In quantum mechanics the time operator {Theta} satisfies the commutation relation [{Theta}, H]=i, and thus it may be thought of as being formally canonically conjugate to the Hamiltonian H. The time operator associated with a given Hamiltonian H is not unique because one can replace {Theta} by {Theta}+{Theta}{sub hom}, where {Theta}{sub hom} satisfies the homogeneous condition [{Theta}{sub hom}, H]= 0. To study this nonuniqueness the matrix elements of {Theta} for the harmonic-oscillator Hamiltonian are calculated in the eigenstate basis. This calculation requires the summation of divergent series, and the summation is accomplished by using zeta-summation techniques. It is shown that by including appropriate homogeneous contributions, the matrix elements of {Theta} simplify dramatically. However, it is still not clear whether there is an optimally simple representation of the time operator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical characterization of free electron concentration in heteroepitaxial InN layers using Fourier transform infrared spectroscopy and a 2 Multiplication-Sign 2 transfer-matrix algebra

Fourier Transform Infrared (FTIR) reflectance spectroscopy has been implemented as a non-destructive, non-invasive, tool for the optical characterization of a set of c-plane InN single heteroepitaxial layers spanning a wide range of thicknesses (30-2000 nm). The c-plane (0001) InN epilayers were grown by plasma-assisted molecular beam epitaxy (PAMBE) on GaN(0001) buffer layers which had been grown on Al{sub 2}O{sub 3}(0001) substrates. It is shown that for arbitrary multilayers with homogeneous anisotropic layers having their principal axes coincident with the laboratory coordinates, a 2 Multiplication-Sign 2 matrix algebra based on a general transfer-matrix method (GTMM) is adequate to interpret their optical response. Analysis of optical reflectance in the far and mid infrared spectral range has been found capable to discriminate between the bulk, the surface and interface contributions of free carriers in the InN epilayers revealing the existence of electron accumulation layers with carrier concentrations in mid 10{sup 19} cm{sup -3} at both the InN surface and the InN/GaN interface. The spectra could be fitted with a three-layer model, determining the different electron concentration and mobility values of the bulk and of the surface and the interface electron accumulation layers in the InN films. The variation of these values with increasing InN thickness could be also sensitively detected by the optical measurements. The comparison between the optically determined drift mobility and the Hall mobility of the thickest sample reveals a value of r{sub H} = 1.49 for the Hall factor of InN at a carrier concentration of 1.11 Multiplication-Sign 10{sup 19} cm{sup -3} at 300 Degree-Sign {Kappa}.

36 MATERIALS SCIENCE↗