Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Local Electronic And Dielectric Properties at Nanosized Interfaces (Final Report)

The behavior of grain boundaries and interfaces has been a focus of fundamental research for decades because variations of structure and composition at interfaces dictate mechanical, electrical, optical and dielectric properties in solids. Similarly, the consequence of atomic and electronic structures of surfaces to chemical and physical interactions are critical due to their implications to catalysis and device fabrication. Increasing fundamental understanding of surfaces and interfaces has materially advanced technologies that directly bear on energy considerations. Currently, exciting developments in materials processing are enabling creative new electrical, optical and chemical device configurations. Controlled synthesis of nanoparticles, semiconducting nanowires and nanorods, optical quantum dots, etc. along with a range of strategies for assembling and patterning nanostructures portend the viability of new devices that have the potential to significantly impact the energy landscape. As devices become smaller the impact of interfaces and surfaces grows geometrically. As with other nanoscale phenomena, small interfaces do not exhibit the same properties as do large interfaces. The size dependence of interface properties had not been explored and understanding at the most fundamental level is necessary to the advancement of nanostructured devices. An equally important factor in the behavior of interfaces in devices is the ability to examine the interfaces under realistic conditions. For example, interfaces and boundaries dictate the behavior of oxide fuel cells which operate at extremely high temperatures in dynamic high pressure chemical environments. These conditions preclude the characterization of local properties during fuel cell operation. The objective of this research was to determine the size and interface atomic structure dependence of the electronic properties of metal/oxide interfaces using model materials systems of noble metals on SrTiO 3 surfaces; and to develop experimental techniques to probe spatially localized properties under extreme conditions. The outcomes of this research summarized in more detail below include; Discovery of the presence of multiple size dependent transport mechanisms at nanoscale interfaces and determination of the critical size parameter associated with a transition from one to another; Determination of the effect of interface atomic structure and electronic structure at nanoscale interfaces on electronic transport across the interfaces, in particular the role of states associated with under coordinated cations enabling resonant tunneling and/or band bending; Discovery and characterization of size dependent resistive switching at nanoscale interfaces; These advances required the development of a process to produce nanosized contacts with controlled interface orientation over sizes (diameters) ranging from 20-500nm and the determination of the mechanical and electrical parameters for robust and accurate measurement of frequency dependent properties of nanoscale interfaces; Invention of a chamber that enables in situ scanning probe microscopy and spectroscopy at high temperature and reactive gas environments; and First measurement of interface properties in an operating solid oxide fuel cell, quantifying the local electrical potentials and energies associated with two reaction mechanisms.

36 MATERIALS SCIENCE↗

Metastability in the MgAl 2 O 4 -Al 2 O 3 System

Aluminum oxide must take a spinel form ( γ-Al 2 O 3 ) at elevated temperatures in order for extensive solid solution to form between MgAl 2 O 4 and α-Al 2 O 3 . The solvus line between MgAl 2 O 4 and Al 2 O 3 has been defined at 79.6 wt% Al 2 O 3 at 1500°C, 83.0 wt% Al 2 O 3 at 1600°C, and 86.5 wt% Al 2 O 3 at 1700°C. A metastable region has been defined at temperatures up to 1700°C which could have significant implications for material processing and properties. Additionally, initial processing could have major implications on final chemistry. The spinel solid solution region has been extended to form an infinite solid solution with Al 2 O 3 at elevated temperatures. A minimum in melting at 1975°C and a chemistry of 96 wt% Al 2 O 3 rather than a eutectic is present, resulting in no eutectic crystal formation during solidification.

36 MATERIALS SCIENCE↗

AN INITIAL ASSESSMENT OF POTENTIAL PRODUCTION TECHNOLOGIES FOR EPSILON-METAL WASTE FORMS

This report examines and ranks a total of seven materials processing techniques that may be potentially utilized to consolidate the undissolved solids from nuclear fuel reprocessing into a low-surface area form. Commercial vendors of processing equipment were contacted and literature researched to gather information for this report. Typical equipment and their operation, corresponding to each of the seven techniques, are described in the report based upon the discussions and information provided by the vendors. Although the report does not purport to describe all the capabilities and issues of various consolidation techniques, it is anticipated that this report will serve as a guide by highlighting the key advantages and disadvantages of these techniques. The processing techniques described in this report were broadly classified into those that employed melting and solidification, and those in which the consolidation takes place in the solid-state. Four additional techniques were examined that were deemed impractical, but were included for completeness. The techniques were ranked based on criteria such as flexibility in accepting wide-variety of feed-stock (chemistry, form, and quantity), ease of long-term maintenance, hot cell space requirements, generation of additional waste streams, cost, and any special considerations. Based on the assumption of ~2.5 L of waste to be consolidated per day, sintering based techniques, namely, microwave sintering, spark plasma sintering and hot isostatic pressing, were ranked as the top-3 choices, respectively. Melting and solidification based techniques were ranked lower on account of generation of volatile phases and difficulties associated with reactivity and containment of the molten metal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Space Station Freedom pressurized element interior design process

The process used to develop the on-orbit working and living environment of the Space Station Freedom has some very unique constraints and conditions to satisfy. The goal is to provide maximum efficiency and utilization of the available space, in on-orbit, zero G conditions that establishes a comfortable, productive, and safe working environment for the crew. The Space Station Freedom on-orbit living and working space can be divided into support for three major functions: (1) operations, maintenance, and management of the station; (2) conduct of experiments, both directly in the laboratories and remotely for experiments outside the pressurized environment; and (3) crew related functions for food preparation, housekeeping, storage, personal hygiene, health maintenance, zero G environment conditioning, and individual privacy, and rest. The process used to implement these functions, the major requirements driving the design, unique considerations and constraints that influence the design, and summaries of the analysis performed to establish the current configurations are described. Sketches and pictures showing the layout and internal arrangement of the Nodes, U.S. Laboratory and Habitation modules identify the current design relationships of the common and unique station housekeeping subsystems. The crew facilities, work stations, food preparation and eating areas (galley and wardroom), and exercise/health maintenance configurations, waste management and personal hygiene area configuration are shown. U.S. Laboratory experiment facilities and maintenance work areas planned to support the wide variety and mixtures of life science and materials processing payloads are described.

Hopson, George D.↗

Space Station Freedom pressurized element interior design process

The process used to develop the on-orbit working and living environment of the Space Station Freedom has some very unique constraints and conditions to satisfy. The goal is to provide maximum efficiency and utilization of the available space, in on-orbit, zero G conditions that establishes a comfortable, productive, and safe working environment for the crew. The Space Station Freedom on-orbit living and working space can be divided into support for three major functions: (1) operations, maintenance, and management of the station; (2) conduct of experiments, both directly in the laboratories and remotely for experiments outside the pressurized environment; and (3) crew related functions for food preparation, housekeeping, storage, personal hygiene, health maintenance, zero G environment conditioning, and individual privacy, and rest. The process used to implement these functions, the major requirements driving the design, unique considerations and constraints that influence the design, and summaries of the analysis performed to establish the current configurations are described. Sketches and pictures showing the layout and internal arrangement of the Nodes, U.S. Laboratory and Habitation modules identify the current design relationships of the common and unique station housekeeping subsystems. The crew facilities, work stations, food preparation and eating areas (galley and wardroom), and exercise/health maintenance configurations, waste management and personal hygiene area configuration are shown. U.S. Laboratory experiment facilities and maintenance work areas planned to support the wide variety and mixtures of life science and materials processing payloads are described.

Hopson, George D.↗

Bubble explosion induced melt pool instabilities in electron beam melting of aluminum alloy

Electron beam melting (EBM) is an additive manufacturing technology that can process materials and manufacture components otherwise impossible or uneconomical. However, defects, including porosity and surface irregularities, are widely reported in EBM-built components, and their formation mechanisms are not fully understood. Here, using in-situ high-speed synchrotron X-ray imaging, we reveal that bubble explosions in Al6061 during EBM induce melt pool instabilities contributing to defect formation. The melt pool and keyhole evolve through three stages: (1) initial formation of a melt pool, (2) subsurface bubble formation and explosion, and (3) periodic keyhole oscillation. During scanning, periodic bubble explosions can eject molten liquid as spatters and disturb the vapor depression and melt pool, contributing to surface humping, that may trigger lack-of-fusion defects in subsequent layers. The physical insights we report could provide guidance for EBM machine development, process innovation, alloy design and model development.

36 MATERIALS SCIENCE↗

Coherent control of asymmetric spintronic terahertz emission from two-dimensional hybrid metal halides

Abstract Next-generation terahertz (THz) sources demand lightweight, low-cost, defect-tolerant, and robust components with synergistic, tunable capabilities. However, a paucity of materials systems simultaneously possessing these desirable attributes and functionalities has made device realization difficult. Here we report the observation of asymmetric spintronic-THz radiation in Two-Dimensional Hybrid Metal Halides (2D-HMH) interfaced with a ferromagnetic metal, produced by ultrafast spin current under femtosecond laser excitation. The generated THz radiation exhibits an asymmetric intensity toward forward and backward emission direction whose directionality can be mutually controlled by the direction of applied magnetic field and linear polarization of the laser pulse. Our work demonstrates the capability for the coherent control of THz emission from 2D-HMHs, enabling their promising applications on the ultrafast timescale as solution-processed material candidates for future THz emitters.

36 MATERIALS SCIENCE↗

Py MILab: Capturing, Analyzing and Storing Test Data

Integrated Computational Materials Engineering (ICME) has recently received widespread attention due to its promises in reducing dependence on physical testing for engineering design by relying on simulation, reducing both time and cost to market for various applications. ICME however requires validated multiscale material models, which is heavily dependent on available test data with full material and test pedigree, including material processing, test and measurement equipment, raw data collection, and analysis methodology and results. Populating searchable information management systems with such rich data sets is often burdensome for data producers, resulting in a lack of findable data for modelers to validate and verify their models. To overcome these cultural barriers to ICME, NASA has developed of various database-integration toolsets that perform both data management activities within the organization’s best practices with additional functionality that relieves the effort of the data producer and promotes adoption of information management system. One such tool currently under development is Py MILab, an automatic framework for automatic capturing, analysis, maintenance, and storage of material test data. Py MILab uses a modular approach for capturing raw data, analyzing the data, and storing the data in a database, interfaced by neutral file structures, to promote plug-and-play capabilities for various analysis types. TMAnalysis is a Python-based tool that performs automatic data reduction and analysis of uniaxial thermomechanical test data. The TMAnalysis toolset can be implemented within the Analysis module of Py MILab, and thus requires a populated neutral file form the Raw Data Module of Py MILab and outputs a Analysis neutral file compatible with the Database Module of Py MILab. TMAnalysis is able to perform automatic segmentation of multistage tests and perform data analysis and reduction, including determination of point-wise properties in tension, compression, and shear, analysis of stress relaxation tests, creep analysis and zone identification, and combination of these stage types for tests with complex loading histories. The TMAnalysis code is accompanied with a graphical user interface (GUI) that allows users to easily analyze test data in bulk, verify the automatic, consistent analysis performed by the backend code, and edit stage segmentation if necessary before producing the output neutral files, ensuring data is properly analyzed and maintained with full traceability.

Data management↗

Molecular mechanism of crystallization impacting calcium phosphate cements

In summary, SPM data has shown that (1) Mg inhibits growth on all steps but relatively high Mg/Ca ratios are needed. Extracting the mechanism of interaction requires more modeling of the kinetic data, but step morphology is consistent with incorporation. (2) Citrate has several effects depending on the citrate/Ca ratio. At the lowest concentrations, citrate increases the step free energy without altering the step kinetics; at higher concentrations, the polar step is slowed. (3) Oxalate also slows the polar step but additionally stabilizes a new facet, with a [100]{sub Cc} step. (4) Etidronate has the greatest kinetic impact of the molecules studied. At 7{micro}M concentrations, the polar step slows by 60% and a new polar step appears. However, at the same time the [10-1]{sub Cc} increases by 67%. It should be noted that all of these molecules complex calcium and can effect kinetics by altering the solution supersaturation or the Ca to HPO{sub 4}{sup 2-} ratio. For the SPM data shown, this effect was corrected for to distinguish the effect of the molecule at the crystal surface from the effect of the molecule on the solution speciation. The goal of this paper is to draw connections between fundamental studies of atomic step motion and potential strategies for materials processing. It is not our intent to promote the utility of SPM for investigating processes in cement dynamics. The conditions are spectacularly different in many ways. The data shown in this paper are fairly close to equilibrium (S=1.6) whereas the nucleation of cements is initiated at supersaturation ratios in the thousands to millions. Of course, after the initial nucleation phase, the growth will occur at more modest supersaturations and as the cement evolves towards equilibrium certainly some of the growth will occur in regimes such as shown here. In addition to the difference in supersaturation, cements tend to have lower additive to calcium ratios. As an example, the additive to Ca ratio is {approx}10{sup -3} to 10{sup -4} for a pyrophosphate based cement (Grover et al., 2006). Where the in situ SPM approach provides unique insights is in providing details of where and how molecules inhibit or accelerate kinetics. This has the potential to aid in designing molecules to target specific steps and to guide synergistic combinations of additives. For example, it is unlikely that bulk techniques could deduce the simultaneous acceleration and inhibition effects of etidronate; or that citrate reduced growth rate by altering step density rather than step speed. In addition, SPM data translates to tractable questions for modelers. The questions changes from 'How does etidronate inhibit brushite growth?' to 'Why does etidronate bind strongly to the [101]{sub Cc} step while it doesn't to the [10-1]{sub Cc} step?' This is still a challenging question but it is far better defined. Given that step chemistries are generally different, it seems reasonable to expect that the greatest inhibition will be achieved not with one, but with several synergistically chosen additives. For example, the most effective growth inhibitors for brushite would target the two fast steps, namely the non-polar, [10-1]{sub Cc} and the polar, [101]{sub Cc} steps. Several molecules have been shown to slow the polar step, with etidronate as the most dramatic example. By contrast, only Mg was observed to slow the [10-1]{sub Cc} step. Thus, a combination of high concentrations of Mg to target the [10-1]{sub Cc} step with low concentrations of etidronate to target the polar steps, should be a more effective combination than either alone. However Mg is not a particularly good inhibitor in the sense that high concentrations are needed, and it is not specific. More ideally, an inhibitor would be designed to interact specifically with the [10-1] step, which would allow the two steps to be independently modified. Again, this provides an opportunity for tighter coupling with theoretical modeling. The question changes from 'What types of molecules will inhibit brushite growth' to 'What type of molecule will interact with the [10-1]{sub Cc} step?' Similarly, to increase resorption rate, it would be most efficacious to target the slow moving [-100] step, perhaps by targeting the hydroxyl group which seem to stabilize this step compared to its otherwise similar mirror, [100]. In short, there are a number of opportunities where molecular scale imaging can provide new information that has the prospect to aid in optimizing calcium phosphate cements.

36 MATERIALS SCIENCE↗

In-Situ Resource Utilization for Space Exploration: Resource Processing, Mission-Enabling Technologies, and Lessons for Sustainability on Earth and Beyond

As humanity begins to reach out into the solar system, it has become apparent that supporting a human or robotic presence in transit and/or on station requires significant expendable resources including consumables (to support people), fuel, and convenient reliable power. Transporting all necessary expendables is inefficient, inconvenient, costly, and, in the final analysis, a complicating factor for mission planners and a significant source of potential failure modes. Over the past twenty-five years, beginning with the Space Exploration Initiative, researchers at the NASA Glenn Research Center (GRC), academic collaborators, and industrial partners have analyzed, researched, and developed successful solutions for the challenges posed by surviving and even thriving in the resource limited environment(s) presented by near-Earth space and non-terrestrial surface operations. In this retrospective paper, we highlight the efforts of the co-authors in resource simulation and utilization, materials processing and consumable(s) production, power systems and analysis, fuel storage and handling, propulsion systems, and mission operations. As we move forward in our quest to explore space using a resource-optimized approach, it is worthwhile to consider lessons learned relative to efficient utilization of the (comparatively) abundant natural resources and improving the sustainability (and environment) for life on Earth. We reconsider Lunar (and briefly Martian) resource utilization for potential colonization, and discuss next steps moving away from Earth.

Hepp, A. F.↗

In-Situ Resource Utilization for Space Exploration: Resource Processing, Mission-Enabling Technologies, and Lessons for Sustainability on Earth and Beyond

As humanity begins to reach out into the solar system, it has become apparent that supporting a human or robotic presence in transit andor on station requires significant expendable resources including consumables (to support people), fuel, and convenient reliable power. Transporting all necessary expendables is inefficient, inconvenient, costly, and, in the final analysis, a complicating factor for mission planners and a significant source of potential failure modes. Over the past twenty-five years, beginning with the Space Exploration Initiative, researchers at the NASA Glenn Research Center (GRC), academic collaborators, and industrial partners have analyzed, researched, and developed successful solutions for the challenges posed by surviving and even thriving in the resource limited environment(s) presented by near-Earth space and non-terrestrial surface operations. In this retrospective paper, we highlight the efforts of the co-authors in resource simulation and utilization, materials processing and consumable(s) production, power systems and analysis, fuel storage and handling, propulsion systems, and mission operations. As we move forward in our quest to explore space using a resource-optimized approach, it is worthwhile to consider lessons learned relative to efficient utilization of the (comparatively) abundant natural resources and improving the sustainability (and environment) for life on Earth. We reconsider Lunar (and briefly Martian) resource utilization for potential colonization, and discuss next steps moving away from Earth.

Specific impulse↗

Qualitative and Quantitative Assessment of Nuclear Materials Contained in High-Activity Waste Arising from the Operations at the 'SHELTER' Facility

As a result of the nuclear accident at the Chernobyl NPP in 1986, the explosion dispeesed nuclear materials contained in the nuclear fuel of the reactor core over the destroyed facilities at Unit No. 4 and over the territory immediately adjacent to the destroyed unit. The debris was buried under the Cascade Wall. Nuclear materials at the SHELTER can be characterized as spent nuclear fuel, fresh fuel assemblies (including fuel assemblies with damaged geometry and integrity, and individual fuel elements), core fragments of the Chernobyl NPP Unit No. 4, finely-dispersed fuel (powder/dust), uranium and plutonium compounds in water solutions, and lava-like nuclear fuel-containing masses. The new safe confinement (NSC) is a facility designed to enclose the Chernobyl NPP Unit No. 4 destroyed by the accident. Construction of the NSC involves excavating operations, which are continuously monitored including for the level of radiation. The findings of such monitoring at the SHELTER site will allow us to characterize the recovered radioactive waste. When a process material categorized as high activity waste (HAW) is detected the following HLW management operations should be involved: HLW collection; HLW fragmentation (if appropriate); loading HAW into the primary package KT-0.2; loading the primary package filled with HAW into the transportation cask KTZV-0.2; and storing the cask in temporary storage facilities for high-level solid waste. The CDAS system is a system of 3He tubes for neutron coincidence counting, and is designed to measure the percentage ratio of specific nuclear materials in a 200-liter drum containing nuclear material intermixed with a matrix. The CDAS consists of panels with helium counter tubes and a polyethylene moderator. The panels are configured to allow one to position a waste-containing drum and a drum manipulator. The system operates on the ‘add a source’ basis using a small Cf-252 source to identify irregularities in the matrix during an assay. The platform with the source is placed under the measurement chamber. The platform with the source material is moved under the measurement chamber. The design allows one to move the platform with the source in and out, thus moving the drum. The CDAS system and radioactive waste containers have been built. For each drum filled with waste two individual measurements (passive/active) will be made. This paper briefly describes the work carried out to assess qualitatively and quantitatively the nuclear materials contained in high-level waste at the SHELTER facility. These efforts substantially increased nuclear safety and security at the facility.

Cherkas, Dmytro↗

Staging of RF-accelerating Units in a MEMS-based Ion Accelerator

Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio- frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized with acceleration gap distances and beam aperture sizes of the order of centimeters. Through advances in Micro-Electro-Mechanical Systems (MEMS) fabrication, MEQALACs can now be scaled down to the sub-millimeter regime and batch processed on wafer substrates. In this paper we show first results from using three RF stages in a compact MEMS-based ion accelerator. The results presented show proof-of-concept with accelerator structures formed from printed circuit boards using a 3 × 3 beamlet arrangement and noble gas ions at 10 keV. We present a simple model to describe the measured results. We also discuss some of the scaling behaviour of a compact MEQALAC. The MEMS-based approach enables a low-cost, highly versatile accelerator covering a wide range of currents (10 μA to 100 mA) and beam energies (100 keV to several MeV). Applications include ion-beam analysis, mass spectrometry, materials processing, and at very high beam powers, plasma heating.

43 PARTICLE ACCELERATORS↗

Thermal processing of omicron-terphenyl - A Raman study

Raman spectra from omicron-terphenyl sealed in glass capillary tubes were acquired over temperatures ranging from 233 to 343 K. Over this temperature range, omicron-terphenyl can exist in the solid-crystalline, molten, supercooled-liquid, and amorphous-glassy states. Representative structure-sensitive spectra are presented along with a qualitative description. The lattice spectral feature occurring at a Raman shift of 123/cm displays abrupt changes in profile and intensity as melting and glass transition occur. The intensity ratio of the C-C stretching 996/cm line and C-H stretching line at 1008/cm displays a change related to the transformation of the ordered-crystalline phase to the disordered-liquid or glassy state. At a Raman shift of 1162/cm the solid-crystalline state shows a splitting due to the effect of the crystal field. The possibility of using these structure-sensitive Raman characteristics for in situ diagnostics during materials processing is discussed.

Biswas, A.↗

Microgravity Science in Space Flight Gloveboxes

Microgravity science studies the influences of gravity on phenomena in fluids, materials processes, combustion, and human cell growth in the low acceleration environment of space flight. During the last decade, the accomplishment of the flight research in the field has evolved into an effective cooperation between the flight crew in the Shuttle and the ground-based investigator using real-time communication via voice and video links. This team structure has led to interactive operations in which the crew performs the experimentation while guided, as necessary, by the science investigator who formulated the investigation and who will subsequently interpret and analyze the data. One of the primary challenges to implementing this interactive research has been the necessity of structuring a means of handling fluids, gases, and hazardous materials in a manned laboratory that exhibits the novelty of weightlessness. Developing clever means of designing experiments in closed vessels is part of the solution- but the space flight requirement for one and two failure-tolerant containment systems leads to serious complications in the physical handling of sample materials. In response to the conflict between the clear advantage of human operation and judgment, versus the necessity to isolate the experiment from the crewmember and the spacecraft environment, the Microgravity Research Program has initiated a series of Gloveboxes in the various manned experiment carriers. These units provide a sealed containment vessel whose interior is under a negative pressure with respect to the ambient environment but is accessible to a crewmember through the glove ports.

Baugher, Charles↗

Trapped rubber processing for advanced composites

Trapped rubber processing is a molding technique for composites in which precast silicone rubber is placed within a closed cavity where it thermally expands against the composite's surface supported by the vessel walls. The method has been applied by the Douglas Aircraft Company, under contract to NASA-Langley, to the design and fabrication of 10 DC-10 graphite/epoxy upper aft rudder assemblies. A three-bay development tool form mold die has been designed and manufactured, and tooling parameters have been established. Fabrication procedures include graphite layup, assembly of details in the tool, and a cure cycle. The technique has made it possible for the cocured fabrication of complex primary box structures otherwise impracticable via standard composite material processes.

Marra, P. J.↗

From classical thermodynamics to phase-field method

Phase-field method is a density-based computational method at the mesoscale for modeling and predicting the temporal microstructure and property evolution during materials processes. The focus of this article is on connecting the most common phase-field equations to the very basic first and second laws of classical thermodynamics through rudimentary irreversible thermodynamics. It briefly discusses the relations of the continuum phase-field equations to their counter parts at the microscopic and atomic levels. It attempts to clarify the contributions of long-range elastic, electrostatic, and magnetic interactions to domain structure evolution during structural, ferroelectric, and ferromagnetic phase transformations by separating order parameter changes due to the presence of quasi-static fields and those arising from phase transformations. A few examples are presented to demonstrate the possibility of employing the phase-field method to provide guidance to designing materials for optimum properties or discovering novel mesoscale phenomena or new materials functionalities. Here, the article ends with a brief perspective on a number of potential future directions on the development and applications of phase-field method beyond its traditional applications to structural alloys.

36 MATERIALS SCIENCE↗

Nanostructures for Electrical Energy Storage (NEES) (2020 Final Technical Report)

Nanostructures for Electrical Energy Storage (NEES, www.efrc.umd.edu) was an Energy Frontier Research Center supported by the DOE Office of Science, Basic Energy Sciences, from 8/1/2009 to 7/31/2020. Led by the University of Maryland, NEES enjoyed extensive collaborations with its funded partners, including two DOE Laboratories and six universities. The NEES vision has been to reveal a set of scientific insights and design principles that can underpin a next-generation electrical energy storage approach, building on advances in nanoscale science and technology to achieve simultaneous high power and high energy over extended charge/discharge cycling. The vision is motivated by the recognition that scaling into the nano regime opens the door to new physical phenomena and that the tools enlisted in nanoscale research provide major new opportunities for the synthesis not only of materials at molecular scale but for structures at nano scale and above. NEES has translated this vision into its research program based on two observations. First, while the behavior of ions and electrons in electrolytes and in electrode materials is crucial to electrical energy storage (or more appropriately electrochemical energy storage), it is the transport of ion and electron charge between different structural components of a storage device that ultimately determine its performance. With it well recognized that the choice of electrode materials typically constrain ion transport kinetics as well as maximum ion concentration, the search for better electrode materials has been a primary driver of battery research. At the same time the synthesis of electrodes is typically based on aggregation of particles with varying size, shape, and orientation in the electrode. Together with the presence of additional materials to impart electrical conductivity and cohesion to the composite electrode, change in electrode materials is necessarily accompanied by structural changes at the nano/micro scale that are difficult to categorize and manage. From the beginning, NEES’ vision has been to create and study simpler, highly controlled spatial arrangements of known materials as battery components (electrodes, current collectors, and electrolyte) and to understand how design and structure above the molecular scale determines the energy storage performance available from known materials. Second, advances in nanoscience dramatically expanded the portfolio of synthesis methods, structural motifs, and new phenomena available for research. Some of these gave rapid access to new building blocks at the deep nanoscale (e.g., carbon nanotubes grown by self-assembly, nanoscale arrays formed by electrochemical self-alignment, monolayer films controlled by self-limiting reaction). Such advances served as the enabler for the NEES vision to be pursued experimentally through study of 3D structures created and controlled at the nano, micro, and meso scales. Here, we use meso as in the BES MESO Report, implying not only intermediate or varying length scales, but very much the way behavior is influenced by other factors including aggregation of nanocomponents at different densities and spatial configurations, statistical variations in the aggregates, hierarchical architectures in which they can be assembled, or local 3D configurations that result from the architectures. Over its life cycle, NEES has pursued two overarching goals: (1) to understand the scientific fundamentals of electrochemical storage from the nanoscale to the mesoscale; and (2) to create and learn from innovative, controlled, heterogeneous nanostructures, where such nanostructures can enable the first goal and serve as models for future paradigms in energy storage. Specific goals have included: Synthesize heterogeneous nanostructures comprised of multiple materials arranged in controlled fashion and characterize their behavior; Demonstrate and elucidate design principles for achieving simultaneous high power and high energy; Develop materials processes which enable precision control of thin layers and 3D structures; Investigate the impact of artificial interphases on electrode stability during ion insertion/deinsertion; Create dense arrays of nanostructures to understand how the architecture of these assemblies, along with nanostructure design, influences energy storage behavior at the mesoscale; Identify and understand the consequences of nanoconfinement and local inhomogeneities in 3D mesoscale arrays; Develop and apply computational models to stimulate, guide and interpret experiments.

25 ENERGY STORAGE↗