Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “location map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Experimental investigation of the dependence of void nucleation and growth on initial microstructure in high-purity titanium under tension

An experimental investigation of failure mechanisms in relation to the initial microstructure in high-purity titanium samples is presented. The initial microstructure of the specimens was measured in 3D using diffraction-contrast tomography (DCT). Ex-situ X-ray computed tomography (XCT) was used to visualize voids in specimens at various levels of deformation attained by interrupted tensile testing. Electron backscatter diffraction (EBSD) mapping was used to characterize the deformed microstructures per specimen. The investigation showed that the location of failures was unrelated to the formation of the first voids, but rather the nucleation and growth of cracks were from heavily deformed surface regions. The areas surrounding the failure-causing cracks had the highest propensity for void development of any area in the specimen. This facilitated crack propagation through the specimen via “linking up”. The failure of the specimens by microvoid coalescence was bolstered by “dimpled” fracture surfaces. Paint composed of gallium embedded in rubber was used to track the displacement of points along the loading direction of the specimens, to relate the location of failure to the material's initial microstructure. However, the correlation proved difficult, due to complex microstructural evolution involving voids, grain fragmentations, and profuse twinning. Nevertheless, it was shown that necking occurred near the largest grain in the gauge section of the specimens. This is likely caused by the decrease in strength of larger grains, causing strain to concentrate in their vicinity. Here, a comprehensive picture of the failure processes in high-purity titanium under axial loading is presented and discussed in the paper.

36 MATERIALS SCIENCE↗

Data Management Architectures

Data management is the organization of information to support efficient access and analysis. For data intensive computing applications, the speed at which relevant data can be accessed is a limiting factor in terms of the size and complexity of computation that can be performed. Data access speed is impacted by the size of the relevant subset of the data, the complexity of the query used to define it, and the layout of the data relative to the query. As the underlying data sets become increasingly complex, the questions asked of it become more involved as well. For example, geospatial data associated with a city is no longer limited to the map data representing its streets, but now also includes layers identifying utility lines, key points, locations and types of businesses within the city limits, tax information for each land parcel, satellite imagery, and possibly even street-level views. As a result, queries have gone from simple questions, such as "how long is Main Street?", to much more complex questions such as "taking all other factors into consideration, are the property values of houses near parks higher than those under power lines, and if so, by what percentage". Answering these questions requires a coherent infrastructure, integrating the relevant data into a format optimized for the questions being asked.

Critchlow, Terence J.↗

The Arctic Plant Aboveground Biomass Synthesis Dataset

Plant biomass is a fundamental ecosystem attribute that is sensitive to rapid climatic changes occurring in the Arctic. Nevertheless, measuring plant biomass in the Arctic is logistically challenging and resource intensive. Lack of accessible field data hinders efforts to understand the amount, composition, distribution, and changes in plant biomass in these northern ecosystems. Here, we present The Arctic plant aboveground biomass synthesis dataset, which includes field measurements of lichen, bryophyte, herb, shrub, and/or tree aboveground biomass (g m -2 ) on 2,327 sample plots from 636 field sites in seven countries. We created the synthesis dataset by assembling and harmonizing 32 individual datasets. Aboveground biomass was primarily quantified by harvesting sample plots during mid- to late-summer, though tree and often tall shrub biomass were quantified using surveys and allometric models. Each biomass measurement is associated with metadata including sample date, location, method, data source, and other information. This unique dataset can be leveraged to monitor, map, and model plant biomass across the rapidly warming Arctic.

54 ENVIRONMENTAL SCIENCES↗

Distribution of bismuth atoms in epitaxial GaAsBi

The distribution of Bi atoms in epitaxial GaAs{sub (1-x)}Bi{sub x} is analyzed through aberration-corrected Z-contrast images. The relation between the atomic number and the intensity of the images allows quantifying the distribution of Bi atoms in this material. A bidimensional map of Bi atoms is extracted showing areas where nanoclustering is possible and evidencing the location of Bi at As-substitutional positions in the lattice. The distribution of Bi atoms differs from a random spatial pattern of Bi atoms in the material.

36 MATERIALS SCIENCE↗

Neutron activation diagnostics at the National Ignition Facility (invited)

Neutron yields are measured at the National Ignition Facility (NIF) by an extensive suite of neutron activation diagnostics. Neutrons interact with materials whose reaction cross sections threshold just below the fusion neutron production energy, providing an accurate measure of primary unscattered neutrons without contribution from lower-energy scattered neutrons. Indium samples are mounted on diagnostic instrument manipulators in the NIF target chamber, 25-50 cm from the source, to measure 2.45 MeV deuterium-deuterium fusion neutrons through the {sup 115}In(n,n'){sup 115m} In reaction. Outside the chamber, zirconium and copper are used to measure 14 MeV deuterium-tritium fusion neutrons via {sup 90}Zr(n,2n), {sup 63}Cu(n,2n), and {sup 65}Cu(n,2n) reactions. An array of 16 zirconium samples are located on port covers around the chamber to measure relative yield anisotropies, providing a global map of fuel areal density variation. Neutron yields are routinely measured with activation to an accuracy of 7% and are in excellent agreement both with each other and with neutron time-of-flight and magnetic recoil spectrometer measurements. Relative areal density anisotropies can be measured to a precision of less than 3%. These measurements reveal apparent bulk fuel velocities as high as 200 km/s in addition to large areal density variations between the pole and equator of the compressed fuel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

PROBING THE MASS-LOSS HISTORY OF THE YELLOW HYPERGIANT IRC+10420

We have used the submillimeter array to image the molecular envelope around the yellow hypergiant IRC+10420. Our observations reveal a large and clumpy expanding envelope around the star. The molecular envelope shows a clear asymmetry in {sup 12}CO J = 2-1 emission in the southwest direction. The elongation of the envelope is found even more pronounced in the emission of {sup 13}CO J = 2-1 and SO J {sub K} = 6{sub 5}-5{sub 4}. A small positional velocity gradient across velocity channels is seen in these lines, suggesting the presence of a weak bipolar outflow in the envelope of IRC+10420. In the higher resolution {sup 12}CO J = 2-1 map, we find that the envelope has two components: (1) an inner shell (shell I) located between radius of about 1'' and 2''; (2) an outer shell (shell II) located between 3'' and 6'' in radius. These shells represent two previous mass-loss episodes from IRC+10420. We attempt to derive in self-consistent manner the physical conditions inside the envelope by modeling the dust properties, and the heating and cooling of molecular gas. We estimate a mass-loss rate of {approx}9 x 10{sup -4} M {sub sun} yr{sup -1} for shell I and 7 x 10{sup -4} M {sub sun} yr{sup -1} for shell II. The gas temperature is found to be unusually high in IRC+10420 in comparison with other oxygen-rich envelopes. The elevated gas temperature is mainly due to higher heating rate, which results from the large luminosity of the central star. We also derive an isotopic ratio {sup 12}C/{sup 13}C = 6.

79 ASTRONOMY AND ASTROPHYSICS↗

Discovery of a very large structure at z = 3.78

We report the discovery of a large-scale structure containing multiple protoclusters at z = 3.78 in the Boötes field. The spectroscopic discovery of five galaxies at z = 3.783 ± 0.002 lying within 1 Mpc of one another led us to undertake a deep narrow- and broadband imaging survey of the surrounding field. Within a comoving volume of 72 × 72 × 25 Mpc{sup 3}, we have identified 65 Lyα emitter (LAE) candidates at z = 3.795 ± 0.015, and four additional galaxies at z {sub spec} = 3.730, 3.753, 3.780, 3.835. The galaxy distribution within the field is highly non-uniform, exhibiting three large (≈3-5 ×) overdensities separated by 8-14 Mpc (physical) and possibly connected by filamentary structures traced by LAEs. The observed number of LAEs in the entire field is nearly twice the average expected in field environments based on estimates of the Lyα luminosity function at these redshifts. We estimate that by z = 0 the largest overdensity will grow into a cluster of mass ≈10{sup 15} M {sub ☉}; the two smaller overdensities will grow into clusters of mass (2-6) × 10{sup 14} M {sub ☉}. The highest concentration of galaxies is located at the southern end of the image, suggesting that the current imaging may not map the true extent of the large-scale structure. Finding three large protocluster candidates within a single 0.3 deg{sup 2} field is highly unusual; expectations from theory suggest that such alignments should occur less than 2% of the time. Searching for and characterizing such structures and accurately measuring their volume space density can therefore place constraints on the theory of structure formation. Such regions can also serve as laboratories for the study of galaxy formation in dense environments.

79 ASTRONOMY AND ASTROPHYSICS↗

Genetic analysis in the Collaborative Cross breeding population

Genetic reference populations in model organisms are critical resources for systems genetic analysis of disease related phenotypes. The breeding history of these inbred panels may influence detectable allelic and phenotypic diversity. The existing panel of common inbred strains reflects historical selection biases, and existing recombinant inbred panels have low allelic diversity. All such populations may be subject to consequences of inbreeding depression. The Collaborative Cross (CC) is a mouse reference population with high allelic diversity that is being constructed using a randomized breeding design that systematically outcrosses eight founder strains, followed by inbreeding to obtain new recombinant inbred strains. Five of the eight founders are common laboratory strains, and three are wild-derived. Since its inception, the partially inbred CC has been characterized for physiological, morphological, and behavioral traits. The construction of this population provided a unique opportunity to observe phenotypic variation as new allelic combinations arose through intercrossing and inbreeding to create new stable genetic combinations. Processes including inbreeding depression and its impact on allelic and phenotypic diversity were assessed. Phenotypic variation in the CC breeding population exceeds that of existing mouse genetic reference populations due to both high founder genetic diversity and novel epistatic combinations. However, some focal evidence of allele purging was detected including a suggestive QTL for litter size in a location of changing allele frequency. Despite these inescapable pressures, high diversity and precision for genetic mapping remain. These results demonstrate the potential of the CC population once completed and highlight implications for development of related populations. Supplementary material consists of Supplementary Table 1 Phenotypic means, variances, ranges and heritabilities for all traits and generations, Supplementary Table 2, all phenotypic values, Supplementary Table 3, multiple QTL mapping.

59 BASIC BIOLOGICAL SCIENCES↗

Imprints of gravitational lensing in the Planck cosmic microwave background data at the location of W I S E × SCOS galaxies

We detect weak gravitational lensing of the cosmic microwave background at the location of the WISE × SuperCOSMOS (WISE × SCOS) galaxies using the publicly available Planck lensing convergence map. By stacking the lensing convergence map at the position of 12.4 million galaxies in the redshift range 0.1 ≤ $\mathscr{z}$ ≤ 0.345, we find the average mass of the galaxies to be $M_{200_{crit}}$ = 6.25 ± 0.6 × 10 12 M$_⊙$. The null hypothesis of no lensing is rejected at a significance of 17$σ$ . We split the galaxy sample into three redshift slices, each containing ~4.1 million objects, and obtain lensing masses in each slice of 4.18 ± 0.8, 6.93 ± 0.9, and 18.84 ± 1.2 × 10 12 M$_⊙$. Our results suggest a redshift evolution of the galaxy sample masses, but this apparent increase might be due to the preferential selection of intrinsically luminous sources at high redshifts. The recovered mass of the stacked sample is reduced by 28% when we remove the galaxies in the vicinity of galaxy clusters with mass $M_{200_{crit}}$ = 2 × 10 14 M ⊙ . We forecast that upcoming CMB surveys can achieve 5% galaxy mass constraints over sets of 12.4 million galaxies with $M_{200_{crit}}$ = 1 × 10 12 M ⊙ at $z$ = 1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nondestructive Evaluation of Stress Corrosion Cracking in a Welded Steel Plate Using Guided Ultrasonic Waves

Stress corrosion cracking (SCC) had occurred in early-generation high-level nuclear waste tanks constructed by welding carbon steel. This paper describes an ultrasonic inspection system and its fundamental ability to detect and quantify the length of SCC on thick welded steel plates. The finite element method (FEM) was applied to simulate the welding process to estimate the welding residual stress field. Growth of stress corrosion cracks is driven by crack stress intensities exceeding the subcritical cracking threshold intensity. The subject plate was experimentally inspected with ultrasonic nondestructive evaluation (NDE) techniques to characterize the extent of SCC. The NDE system uses a piezoelectric transducer to generate guided waves in the thick steel plate, and a scanning laser Doppler vibrometer (SLDV) to measure multidimensional time–space wavefield data over a user-defined scanning area in the plate surface. The measured wavefield data can show wave interactions in a localized area in the plate due to the presence of the discontinuities of the SCC. To generate an inspection image that can precisely show the crack’s location and/or the dimension, the wavefield data are further processed to generate inspection image that maps the entire sample plate so the crack can be clearly identified in the plate while its length can be readily estimated. In conclusion, the ultrasonic test results for crack length agree well with the visually estimated length and are close to that predicted by the FEM for cracks in the weld residual stress field.

36 MATERIALS SCIENCE↗

Efficient method for the measurement of lifetime optical damage performance of thin film coatings from laser damage size analysis

Here, a laser damage test method based on damage size analysis (DSA) is described that simplifies the derivation of the lifetime optical damage threshold of film materials critical in the design of devices used in high-repetition-rate, high-power laser systems. The DSA method presented here is solely based on imaging to measure the damage site size produced from exposure to a known Gaussian-shaped beam with a fixed, systematically selected fluence well above the ablation threshold. The method locates the damage boundary produced from repeated exposures, using images with a high contrast, and maps it to the beam profile to extract a lifetime laser damage fluence threshold value. We validate the DSA approach using a few relevant transparent film material systems and by comparing it to the standard S /1 laser damage test method. The DSA method can be more efficient and accelerate materials development and validation necessary to support the design of high-power repetition-rated lasers and optoelectronic devices.

36 MATERIALS SCIENCE↗

A robust aerosol impact on clouds along the subtropical to tropical transition

Marine clouds undergo a transition from subtropical stratocumulus (Sc) to shallow cumulus (Cu) and eventually to deep convective (DC) systems as air masses advect from the subtropics towards the deep tropics. How aerosols modulate this Lagrangian cloud evolution remains largely uncertain. Here we use both 5 years of satellite observations mapped along 8 d Lagrangian trajectories and complementary large-eddy simulations from 9 initiation locations across the Northeast Pacific, Southeast Pacific, and Southeast Atlantic. This Lagrangian framework allows us to quantify the aerosol effect and its co-variability with meteorological conditions on cloud microphysics, macrophysics, and top-of-atmosphere radiation through the full Sc-Cu-DC transition. We show that increasing aerosol concentrations leads to deeper and more reflective clouds throughout this cloud transition. Examining the thermodynamic evolution along the trajectory indicates a well-known trend: enhanced moistening near the boundary-layer top and lower free troposphere under polluted conditions, suggesting that part of the co-variability between aerosol and meteorological conditions may be internally driven. The agreement between model simulations and satellite data alongside the multi-basin coherence of the results indicates that aerosols systematically amplify cloud depth and reflectivity during the subtropical–to–tropical cloud transition.

54 ENVIRONMENTAL SCIENCES↗

Procedure Parsing: A Method for Parsing Handwritten Documents into Computer-Based Procedures

The nuclear industry is heavily procedure driven, where almost everything has a step-by-step instruction that is expected to be followed in detail. Historically, these procedures were printed on paper copies. Recently, the industry transitioned towards electronic copies (i.e., PDFs on tablets). One major drive for this transition is the introduction of human error and loss of situation awareness when using paper copies. However, electronic copies of documents inherently have the same error traps as their paper cousins. Therefore, there is an increased interest in a way to utilize the information in the step-by-step guidance, but to present it in a dynamic manner that guides the user and adapts to any encountered conditions. Researchers at Idaho National Laboratory propose a flexible, automated method based on document parsing and augmented by natural language processing (NLP) techniques, to address these shortcomings and capitalize on these recent advancements in machine learning. The proposed method provides a cost-effective solution for computer-assisted procedure parsing of hand-written control room procedures, originally authored in Word or PDF formats, into instructions that can be displayed as computer-based procedures (CBP) in a modern graphical user interface. The researchers devised, implemented and demonstrated the Operating Procedure Extender for Novel Systems (OPENS) method in 2020. The key to OPENS is to map the original procedure text into a context-free grammar, tying content to equipment, locations, and other steps, actions, etc. This formal grammar is then used to isolate and define keywords and actions verbs, such as “measure” or “evaluate” and tie them to specific equipment referenced within that step or located in other steps, substeps, actions, subactions and tables throughout the procedure. OPENS generates an abstract syntax tree from the document which it uses to store a copy of this information in the open-standard, machine-readable and human-readable file formats XML and JSON. The XML is useful to preserve the relational aspects of the procedure for referencing tables and branching information so the user can be directed to the next appropriate active step based on the values entered for that step and previous steps. The JSON is useful for storing and exchanging data objects used to track responses to previous steps and state changes in simulated environments. In future iterations, these formats can also be used for storing more detailed information about input during plant operation or simulation. The techniques the researcher developed could further be improved by integration of recent advancements in machine learning. NLP methods could standardize documents, correct for grammatical error, and provide automated semantic validation. The researcher expects that self-supervised techniques applied to collections of natural language instructions could strengthen the model with broader context. All these methods together give us a practical way to automatically extract protocols from documents and user interactions, empowering researchers, procedure writers and nuclear operators while moving the industry forward.

99 GENERAL AND MISCELLANEOUS↗

Skylab investigation of the upwelling off the Northwest coast of Africa

The upwelling off the NW coast of Africa in the vicinity of Cape Blanc was studied in February - March 1974 from aircraft and in September 1973 from Skylab. The aircraft study was designed to determine the effectiveness of a differential radiometer in quantifying surface chlorophyll concentrations. Photographic images of the S190A Multispectral Camera and the S190B Earth Terrain Camera from Skylab were used to study distributional patterns of suspended material and to locate ocean color boundaries. The thermal channel of the S192 Multispectral Scanner was used to map sea-surface temperature distributions offshore of Cape Blanc. Correlating ocean color changes with temperature gradients is an effective method of qualitatively estimating biological productivity in the upwelling region off Africa.

Szekielda, K. H.↗

Summary of space imagery studies in Utah and Nevada

The author has identified the following significant results. An enhanced enlargement of a S190B color image at a scale of 1/19,200 of the Bingham porphyry copper deposit has compared a geological map of the area with the space imagery map as fair for the intrusion boundaries and total lack of quality for mapping the sediments. Hydrothermal alteration is only slightly evident on space imagery at Bingham, but in the Tintic mining district and the volcanic piles of the Keg and Thomas ranges, Utah, hydrothermal alteration is readily mapped on color enlargements of S190B. Several sites of calderas were recognized and new ones located on space imagery. One of the tools developed is a mercury soil-gas analyzer that is becoming significant as an aid in locating hidden mineralized zones which were suggested from space imagery. In addition, this tool is a prime aid in locating and better delineating geothermal sites.

Jensen, M. L.↗

Application Explorer Mission-A heat capacity mapping mission

The author has identified the following significant results. Fine orogenic sediments, not detectable on the images recorded within the visible wavelength region, can be clearly recognized on all night IR-images. The area of glaciation in the northern foreland of the Alps can be partially identified on the basis of night-IR data. The terminal moraine of various glacierization phases can be mapped and the relative dry and unsorted moraine material consisting of crystalline components can be located through the vegetation cover. The eastern part of the glaciation area can be traced because of reverse temperature effect. In addition to the upper Bavarian lakes, the night-IR images clearly indicate the distribution of high soil moisture areas such as swamps and bogs. The geological border of the upper fresh water molasse in the northern part of the basin north of Munich is identifiable on night IR-imagery. Drift peat areas can be located on day-IR images of the dry season of the year.

Source record↗

Electrostatic ion-cyclotron waves in a nonuniform magnetic field

The properties of electrostatic ion-cyclotron waves excited in a single-ended cesium Q machine with a nonuniform magnetic field are described. The electrostatic ion-cyclotron waves are generated in the usual manner by drawing an electron current to a small exciter disk immersed in the plasma column. The parallel and perpendicular (to B) wavelengths and phase velocities are determined by mapping out two-dimensional wave phase contours. The wave frequency f depends on the location of the exciter disk in the nonuniform magnetic field, and propagating waves are only observed in the region where f is approximately greater than fci, where fci is the local ion-cyclotron frequency. The parallel phase velocity is in the direction of the electron drift. From measurements of the plasma properties along the axis, it is inferred that the electron drift velocity is not uniform along the entire current channel. The evidence suggests that the waves begin being excited at that axial position where the critical drift velocity is first exceeded, consistent with a current-driven excitation mechanism.

Cartier, S. L.↗

Jupiter - New estimates of the mean zonal flow at the cloud level

In order to reexamine the magnitude differences of the Jovian atmosphere's jets, as determined by Voyager 1 and 2 images, a novel approach is used to ascertain the zonal mean east-west component of motion. This technique is based on digital pattern matching, and is applied on pairs of mapped images to yield a profile of the mean zonal component that reproduces the exact locations of the easterly and westerly jets between + and - 60 deg latitude. Results have been obtained for all of the Voyager 1 and 2 cylindrical mosaics; the correlation coefficient between Voyagers 1 and 2 in mean zonal flow between + and - 60 deg latitude, determined from violet filter mosaics, is 0.998.

Limaye, S. S.↗