Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “knowledge engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Grobman, J.↗
NASA NTRS1997

Bleed Hole Flow Phenomena Studied

Boundary-layer bleed is an invaluable tool for controlling the airflow in supersonic aircraft engine inlets. Incoming air is decelerated to subsonic speeds prior to entering the compressor via a series of oblique shocks. The low momentum flow in the boundary layer interacts with these shocks, growing in thickness and, under some conditions, leading to flow separation. To remedy this, bleed holes are strategically located to remove mass from the boundary layer, reducing its thickness and helping to maintain uniform flow to the compressor. The bleed requirements for any inlet design are unique and must be validated by extensive wind tunnel testing to optimize performance and efficiency. To accelerate this process and reduce cost, researchers at the NASA Lewis Research Center initiated an experimental program to study the flow phenomena associated with bleed holes. Knowledge of these flow properties will be incorporated into computational fluid dynamics (CFD) models that will aid engine inlet designers in optimizing bleed configurations before any hardware is fabricated. This ongoing investigation is currently examining two hole geometries, 90 and 20 (both with 5-mm diameters), and various flow features.

Source record↗
NASA NTRS1937

Energy Loss, Velocity Distribution, and Temperature Distribution for a Baffled Cylinder Model, Special Report

In the design of a cowling a certain pressure drop across the cylinders of a radial air-cooled engine is made available. Baffles are designed to make use of this available pressure drop for cooling. The problem of cooling an air-cooled engine cylinder has been treated, for the most part, from considerations of a large heat-transfer coefficient. The knowledge of the precise cylinder characteristics that give a maximum heat-transfer coefficient should be the first consideration. The next problem is to distribute this ability to cool so that the cylinder cools uniformly. This report takes up the problem of the design of a baffle for a model cylinder. A study has been made of the important principles involved in the operation of a baffle for an engine cylinder and shows that the cooling can be improved 20% by using a correctly designed baffle. Such a gain is as effective in cooling the cylinder with the improved baffle as a 65% increase in pressure drop across the standard baffle and fin tips.

Brevoort, Maurice J.↗
NASA NTRS1974

Jet engine exhaust emissions of high altitude commercial aircraft projected to 1990

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high-altitude cruise conditions are presented. The forecasts are based on:(1) current knowledge of emission characteristics of combustors and augmentors; (2) the status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft fueled by either JP fuel, liquefied natural gas, or hydrogen. Results are presented for cruise conditions in terms of both an emission index (g constituent/kg fuel) and an emission rate (g constituent/hr).

Grobman, J.↗
DOE OSTI2018

Photoexcited Phenyl Ring Twisting in Quinodimethane Dyes Enhances Photovoltaic Performance in Dye-Sensitized Solar Cells

Four metal-free organic quinodimethane-based dyes, which represent molecular building blocks for a new class of DSSC dyes, were studied here with the objective to improve their photovoltaic performance via molecular engineering strategies. Such strategies can only be systematic and successful if they are derived from knowledge-based paradigms that relate individual aspects of the molecular structure for a given class of dyes to their photovoltaic properties. The optical and electrochemical properties of these dyes were investigated experimentally by UV–vis absorption and emission spectroscopy, as well as cyclic voltammetry and electrochemical impedance spectroscopy. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations on these dyes complement these experiments. Among other results, this concerted experimental and computational study revealed that the dialkylaminophenyl moiety in these dyes exhibits a large twist as a result of its ground-to-excited-state optical transition. In particular, a near-perpendicular (88.98°) twist of the dimethylaminophenyl moiety relative to the π-bridging unit that connects the three aryl rings in 2 was observed upon formation of its photo-excited-state structure. Moreover, it was discovered that 2 affords the highest V OC and power-conversion efficiency (PCE) values among these dyes. The particularly high PCE for 2 was found to be due to this twisting of the phenyl ring, which blocks the pathway of electrons from TiO 2 to the donor, and hence suppresses undesirable electron recombination at the dye···TiO 2 interface. This diode-like effect minimizes undesirable electron-recombination effects and represents an unprecedented structure–property relationship that should be useful for the molecular engineering of larger chromophores in this class of dyes for DSSC applications.

14 SOLAR ENERGY↗
DOE OSTI2023

Status of Cable Aging Knowledge Gaps Identified in the Expanded Materials Degradation Assessment (EMDA)

This report summarizes research relevant to cable aging knowledge gaps identified in NUREG/CR-7153, “Expanded Materials Degradation Assessment (EMDA) Volume 5: Aging of Cables and Cable Systems” (EMDA Vol. 5), performed since the EMDA Vol. 5 was published in 2014. It begins with a discussion of the status of cables in long-term operation of U.S. nuclear power plants (NPPs) and the most common cables found in NPP containment. Next, the major polymer cable insulations, and the mechanisms of concern for degradation of those polymers in service are reviewed. A description of the environmental qualification (EQ) process historically used for safety-related cables is provided as is a review of the potential concerns with that process highlighted in the EMDA Vol. 5. Research addressing each of these is then reviewed. Finally, three potential strategies to support continued safe operation of aging cables are proposed: advanced condition-based verification, targeted material aging studies, and predictive simulation.

42 ENGINEERING↗
DOE OSTI2019

Production of clovamide and its analogues in Saccharomyces cerevisiae and Lactococcus lactis.

Clovamide and its analogues are N-hydroxycinnamoyl-L-amino acids (HAA) that exhibit antioxidant activities. For environmental and economic reasons, biological synthesis of these plant-derived metabolites has garnered interest. In this study, we exploited HDT1, a BAHD acyltransferase recently isolated from red clover, for the production of clovamide and derivatives in S. cerevisiae and L. lactis. HDT1 catalyses the transfer of hydroxycinnamoyl-coenzyme A (CoA) onto aromatic amino acids. Therefore, by heterologously co-expressing HDT1 with 4-coumarate:CoA ligase (4CL), we succeeded in the biological production of clovamide and more than 20 other HAA, including halogenated ones, upon feeding the engineered micro-organisms with various combinations of cinnamates and amino acids. To the best of our knowledge, this is the first report on the biological synthesis of HAA and, more generally, on the synthesis of plant-derived antioxidant phenolic compounds in L. lactis. The production of these health beneficial metabolites in Generally Recognized As Safe (GRAS) micro-organisms such as S. cerevisiae and L. lactis provides new options for their delivery as therapeutics. SIGNIFICANCE AND IMPACT OF THE STUDY: N-hydroxycinnamoyl-L-amino acids such as clovamide are bioactive plant-derived phenolic compounds with health beneficial effects. Relying on chemical synthesis or direct extraction from plant sources for the supply of these valuable molecules poses challenges to environmental sustainability. As an alternative route, this work demonstrates the potential for biological synthesis of N-hydroxycinnamoyl-L-amino acids using engineered microbial hosts such as Saccharomyces cerevisiae and Lactococcus lactis. Besides being more eco-friendly, this approach should also provide more structurally diverse compounds and offer new methods for their delivery to the human body.

Bouchez, P↗
DOE OSTI2019

Observation of 9-Fold Coordinated Amorphous TiO 2 at High Pressure

Knowledge of the structure in amorphous dioxides is important in many fields of science and engineering. In this paper, we report new experimental results of high-pressure polyamorphism in amorphous TiO 2 (a-TiO 2 ). Our data show that the Ti coordination number (CN) increases from 7.2 ± 0.3 at ~16 GPa to 8.8 ± 0.3 at ~70 GPa and finally reaches a plateau at 8.9 ± 0.3 at ≲86 GPa. The evolution of the structural changes under pressure is rationalized by the ratio ($γ$) of the ionic radius of Ti to that of O. It appears that the CN ≈ 9 plateau correlates with the two 9-fold coordinated polymorphs (cotunnite, Fe 2 P) with different $γ$ values. This CN-$γ$ relationship is compared with those of a-SiO 2 and a-GeO 2 , displaying remarkably consistent behavior between CN and $γ$. The unified CN-$γ$ relationship may be generally used to predict the compression behavior of amorphous AO 2 compounds under extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Real-time imaging of self-organization and mechanical competition in carbon nanotube forest growth [Real-time environmental TEM investigation of self-organization and mechanical competition in carbon nanotube forest growth]

Here, the properties of carbon nanotube (CNT) networks and analogous materials comprising filamentary nanostructures are governed by the intrinsic filament properties and their hierarchical organization and interconnection. As a result, direct knowledge of the collective dynamics of CNT synthesis and self-organization is essential to engineering improved CNT materials for applications such as membranes and thermal interfaces. Here, we use real-time environmental transmission electron microscopy (E-TEM) to observe nucleation and self-organization of CNTs into vertically aligned forests. Upon introduction of the carbon source, we observe a large scatter in the onset of nucleation of individual CNTs and the ensuing growth rates. Experiments performed at different temperatures and catalyst particle densities show the critical role of CNT density on the dynamics of self-organization; low-density CNT nucleation results in the CNTs becoming pinned to the substrate and forming random networks, whereas higher density CNT nucleation results in self-organization of the CNTs into bundles that are oriented perpendicular to the substrate. We also find that mechanical coupling between growing CNTs alters their growth trajectory and shape, causing significant deformations, buckling, and defects in the CNT walls. Therefore, it appears that CNT–CNT coupling not only is critical for self-organization but also directly influences CNT quality and likely the resulting properties of the forest. As a result, our findings show that control of the time-distributed kinetics of CNT nucleation and bundle formation are critical to manufacturing well-organized CNT assemblies and that E-TEM can be a powerful tool to investigate the mesoscale dynamics of CNT networks.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Do Research Software Engineers and Software Engineering Researchers Speak the Same Language?

Anecdotal evidence suggests that research software engineers (RSEs) and software engineering researchers (SERs) often use different terminologies for similar concepts, creating communication challenges. To better understand these divergences, we have started investigating how software engineering fundamentals from the SER community are interpreted within the RSE community, identifying aligned concepts, knowledge gaps, and areas for potential adaptation. In conclusion, our preliminary findings reveal opportunities for mutual learning and collaboration, and our systematic methodology for terminology mapping provides a foundation for a crowdsourced extension and validation in the future.

Kehrer, Timo [Univ. of Bern (Switzerland)] (ORCID:↗
DOE OSTI2022

A Hands-on Course on Intensified Membrane Processes for Sustainable Water Purification

The lack in process intensification (PI) training may be limiting processes to achieve sustainability goals. Furthermore, this project developed a hands-on course on intensified membrane processes to address knowledge gaps in PI. Bench-scale activities introduced concepts of membrane separation, operating engineering-scale modules provided a near-industrial experience, and simulation software allowed modeling and optimization of a process. Student evaluations showed that the combination of modeling, experimental, and peer-instruction work helped them understand the application of theoretical concepts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

CMI Report on Project 2.3.2 Activities – 09/2013 to 03/2014

The objective of this project is to develop and apply a Materials-Design Simulator (MDS) for predicting thermodynamic phase stability, structural and magnetic properties, and performance of complex REE-based materials. We seek to create a knowledge base for identifying alloys with desirable properties. The aim of this project is to develop an efficient infrastructure for creating a knowledge base for identifying new alloys with enhance performance and reduced REE-content, and for managing material data acquired within the Focus Area 2 and with input from Focus Area 4. This project integrates two approaches to alloy process modeling that so far have been developed largely independently: (1) electronic structure theory of alloys and (2) semi-empirical methods of computational thermodynamics and kinetics (such as CALPHAD). This project will greatly benefit from experimental data on phase characterization, heat of formation (from differential scanning calorimetry), and magnetism as a function of pressure to support the search for REE substitutes without compromising on target properties for applications. The MDS will be also greatly enhanced through the use of state-of-the-art methods of materials informatics and data mining. The MDS will facilitate examination of research results, discovery of trends, identification of knowledge gaps, and even possibly underlying scientific principles, MDS will be developed and assembled for gathering, accessing, and analyzing available material data generated externally and within CMI projects by experimentalists and modelers. The data in our knowledge base will be accessible to all hub participants via a web interface and underlying engine that will allow targeted searches through heterogeneous data on composition, property and structure spaces encompassing all contributed data.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Convex Relaxations in Power System Optimization, A Brief Introduction

Convex relaxations of the AC power ow equations have attracted signi cant interest in the power systems research community in recent years. The following collection of video lectures provides a brief introduction to the mathematics of AC power systems, continuous nonlinear optimization, and relaxations of the power ow equations. The aim of the videos is to provide the high level ideas of convex relaxations and their applications in power system optimization, and could be used as a starting point for researchers who want to study, use or develop new convex relaxations for use in their own research. The videos do not aim to provide an in-depth tutorial about speci c convex relaxations, but rather focus on ideas that are common to all convex relaxations of the AC optimal power ow problem. The videos assume minimal prerequisite knowledge and are designed to be accessible to a variety of disciplines (e.g. power system engineers, industrial engineers and computer scientists). They are designed to be modular, such that interested listeners can either watch the series as a whole, or choose only the subset that matches their interest. The following sections provide a brief overview of the topics and references covered in each video.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Capsule defects measurement [Slides]

Recent high yield shots a NIF showed that capsule defects are limiting shot performance. Voids in the capsule are not well understood in how they degrade yield performance. Recent simulations show that voids can reduce compressibility without any diagnostic signatures but reduced yield. In extreme cases loss of compression is expected. Up to 10,000 voids might be necessary to measure the different effects. Experiments using capsules with engineered defects can help guide simulations and improve our understanding of the physics involved. The knowledge gained can be applied to other problems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Database schema design: Energy Flexibility Environmental Tradeoffs Tool

The Energy Flexibility-Environment Tradeoff Toolset is designed using Streamlit framework, with Python as the programming language. Data storage is facilitated through the use of SQLite. Streamlit is an open-source Python framework for machine learning and data science teams, and SQLite is the most used database engine.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
NASA NTRS1987

An outlook on hypersonic flight

The NASA Langley Research Center has been active in hypersonic research since the 1950's. A central part of the research conducted since 1970 has focussed on high speed airbreathing propulsion - in particular on supersonic combustion ramjets or scramjets. Renewed interest in very high speed flight in the 1980's has led to some expansion and broadening of this activity with particular attention to extreme speeds approaching orbital velocity. The purpose of this paper is to review the impact of extreme speed on the potential of scramjet propulsion. The implications of system performance objectives on propulsion and vehicle requirements will be explored. Some pertinent results from past studies will be summarized along with examples of engineering design and detailed analysis methods applied to typical scramjet components. Critical areas where fundamental knowledge is lacking will be highlighted, and some proposed studies to deal with these uncertainties will be outlined.

Anderson, Griffin Y.↗
NASA NTRS1988

NESSUS (Numerical Evaluation of Stochastic Structures Under Stress)/EXPERT: Bridging the gap between artificial intelligence and FORTRAN

The development of a probabilistic structural analysis methodology (PSAM) is described. In the near-term, the methodology will be applied to designing critical components of the next generation space shuttle main engine. In the long-term, PSAM will be applied very broadly, providing designers with a new technology for more effective design of structures whose character and performance are significantly affected by random variables. The software under development to implement the ideas developed in PSAM resembles, in many ways, conventional deterministic structural analysis code. However, several additional capabilities regarding the probabilistic analysis makes the input data requirements and the resulting output even more complex. As a result, an intelligent front- and back-end to the code is being developed to assist the design engineer in providing the input data in a correct and appropriate manner. The type of knowledge that this entails is, in general, heuristically-based, allowing the fairly well-understood technology of production rules to apply with little difficulty. However, the PSAM code, called NESSUS, is written in FORTRAN-77 and runs on a DEC VAX. Thus, the associated expert system, called NESSUS/EXPERT, must run on a DEC VAX as well, and integrate effectively and efficiently with the existing FORTRAN code. This paper discusses the process undergone to select a suitable tool, identify an appropriate division between the functions that should be performed in FORTRAN and those that should be performed by production rules, and how integration of the conventional and AI technologies was achieved.

Fink, Pamela K.↗
NASA NTRS1992

Ramp Technology and Intelligent Processing in Small Manufacturing

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Rentz, Richard E.↗