Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “joining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Magnetic-film atom chip with 10 μm period lattices of microtraps for quantum information science with Rydberg atoms

We describe the fabrication and construction of a setup for creating lattices of magnetic microtraps for ultracold atoms on an atom chip. The lattice is defined by lithographic patterning of a permanent magnetic film. Patterned magnetic-film atom chips enable a large variety of trapping geometries over a wide range of length scales. We demonstrate an atom chip with a lattice constant of 10 μm, suitable for experiments in quantum information science employing the interaction between atoms in highly excited Rydberg energy levels. The active trapping region contains lattice regions with square and hexagonal symmetry, with the two regions joined at an interface. A structure of macroscopic wires, cutout of a silver foil, was mounted under the atom chip in order to load ultracold {sup 87}Rb atoms into the microtraps. We demonstrate loading of atoms into the square and hexagonal lattice sections simultaneously and show resolved imaging of individual lattice sites. Magnetic-film lattices on atom chips provide a versatile platform for experiments with ultracold atoms, in particular for quantum information science and quantum simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A normal metal tunnel-junction heat diode

We propose a low-temperature thermal rectifier consisting of a chain of three tunnel-coupled normal metal electrodes. We show that a large heat rectification is achievable if the thermal symmetry of the structure is broken and the central island can release energy to the phonon bath. The performance of the device is theoretically analyzed and, under the appropriate conditions, temperature differences up to ∼200 mK between the forward and reverse thermal bias configurations are obtained below 1 K, corresponding to a rectification ratio R∼2000. The simplicity intrinsic to its design joined with the insensitivity to magnetic fields make our device potentially attractive as a fundamental building block in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

36 MATERIALS SCIENCE↗

Threshold ionization, structural isomers, and electronic states of M{sub 2}O{sub 2} (M = Sc, Y, and La)

M{sub 2}O{sub 2} (M = Sc, Y, and La) were synthesized in a pulsed laser-vaporization molecular beam source and studied by mass-analyzed threshold ionization (MATI) spectroscopy and ab initio calculations. Adiabatic ionization energies (AIEs) and several vibrational frequencies were measured accurately for the first time from the MATI spectra. Six possible structural isomers of M{sub 2}O{sub 2} were considered in the calculations and the three converged structures were used in the spectral analysis. A planar cyclic structure in D{sub 2h} point group was predicted to be the most stable one by the theory and observed by the experiment. The cyclic structure is formed by joining two MO{sub 2} fragments together through two shared oxygen atoms. In forming the ground state clusters, each metal atom loses two (n − 1)d electrons and as a result, has only one ns electron in the metal-based valence orbital. The ground electronic state of Sc{sub 2}O{sub 2} is {sup 1}A{sub g}, and those of Y{sub 2}O{sub 2} and La{sub 2}O{sub 2} are {sup 3}B{sub 1u}. Ionization of both {sup 1}A{sub g} and {sup 3}B{sub 1u} neutral states yields the {sup 2}A{sub g} ion state by removing one of the two ns electrons, and the resultant ion has a similar geometry to the neutral cluster. The AIEs of the clusters are 5.5752 (6), 5.2639 (6), 4.5795 (6) eV for M = Sc, Y, and La, respectively. The vibrational frequencies of the observed modes, including O-M and M-M stretches, are in the range of 200–800 cm{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SNO+: Physics program and status update

Joining the current generation of neutrinoless double beta decay experiments, SNO+ is a kilotonne-scale liquid scintillator neutrino detector housed 2 km underground in Vale Canada Ltd’s Creighton Mine near Sudbury, Ontario, Canada. Through re-purposing existing hardware in place for the now decommissioned Sudbury Neutrino Observatory (SNO), and employing a rigourous materials purification and selection program, SNO+ will investigate neutrinoless double beta decay of {sup 130}Te. Owing to its size, SNO+ expects a sensitivity to the effective Majorana neutrino mass near 100 meV with a 0.3% loading of natural Te and several years of data collection. Designed as a general purpose detector, SNO+ also has a robust physics program that includes investigations of solar and supernova neutrinos, and reactor and geo anti-neutrinos. Construction of the detector is nearly complete, with the first water-fill commissioning phase set to begin at the end of this year and the neutrinoless double beta decay phase following in late 2014.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Scaling up the shape: A novel growth pattern of gallium clusters

Putative global minima for Ga{sub N}{sup +} clusters with size “N” ranging from 49 to 70 are found by employing the Kohn-Sham formulation of the density functional theory, and their evolution is described and discussed in detail. We have discovered a unique growth pattern in these clusters, all of which are hollow core-shell structures. They evolve with size from one spherical core-shell to the next spherical core-shell structure mediated by prolate geometries, with an increase in overall diameter of the core, as well as the shell, without putting on new layers of atoms. We also present a complete picture of bonding in gallium clusters by critically analyzing the molecular orbitals, the electron localization function, and Bader charges. Bonding in these clusters is a mixture of metallic and covalent type that leans towards covalency, accompanied by marginal charge transfer from the surface to the core. Most molecular orbitals of Ga clusters are non-jellium type. Covalency of bonding is supported by a wide localization window of electron localization function, and joining of its basins along the bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interrelationships between information and energy using knowledge management tools

Edward Fredkin was an enthusiastic advocate of information-based theoretical physics, who, in the early 1980s, proposed a new theory of physics based on the idea that the universe is ultimately composed of software. According to Fredkin, reality should be considered as being composed not of particles, matter and forces or energy but of bits of data or information modified according to computational rules. Fredkin went on to demonstrate that, while energy is necessary for storing and retrieving information, it can be arbitrarily reduced in order to carry out any particular instance of information processing, and this operation does not have a lower bound. This implies that it is information rather than matter or energy that should be considered at the ultimate fundamental constituent of reality. This possibility had already been suggested by other scientists. Norbert Wiener heralded a fundamental shift from energy to information and suggested that the universe was founded essentially on the transformation of information, not energy. However, Konrad Zuse was the first, back in 1967, to defend the idea that a digital computer is computing the universe. Richard P. Feynman showed this possibility in a similar light in his reflections on how information related to matter and energy. Other pioneering research on the theory of digital physics was published by Kantor in 1977 and more recently by Stephen Wolfram in 2002, who thereby joined the host of voices upholding that it is patterns of information, not matter and energy, that constitute the cornerstones of reality. In this paper, we introduce the use of knowledge management tools for the purpose of analysing this topic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Signal analysis of NEMS sensors at the output of a chromatography column

This article introduces a joined Bayesian estimation of gas samples issued from a gas chromatography column (GC) coupled with a NEMS sensor based on Giddings Eyring microscopic molecular stochastic model. The posterior distribution is sampled using a Monte Carlo Markov Chain and Gibbs sampling. Parameters are estimated using the posterior mean. This estimation scheme is finally applied on simulated and real datasets using this molecular stochastic forward model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lateral buckling and mechanical stretchability of fractal interconnects partially bonded onto an elastomeric substrate

Fractal-inspired designs for interconnects that join rigid, functional devices can ensure mechanical integrity in stretchable electronic systems under extreme deformations. The bonding configuration of such interconnects with the elastomer substrate is crucial to the resulting deformation modes, and therefore the stretchability of the entire system. In this study, both theoretical and experimental analyses are performed for postbuckling of fractal serpentine interconnects partially bonded to the substrate. The deformation behaviors and the elastic stretchability of such systems are systematically explored, and compared to counterparts that are not bonded at all to the substrate.

36 MATERIALS SCIENCE↗

Monitoring system for the quality assessment in additive manufacturing

Additive Manufacturing (AM) refers to a process by which a set of digital data -representing a certain complex 3dim design - is used to grow the respective 3dim real structure equal to the corresponding design. For the powder-based EOS manufacturing process a variety of plastic and metal materials can be used. Thereby, AM is in many aspects a very powerful tool as it can help to overcome particular limitations in conventional manufacturing. AM enables more freedom of design, complex, hollow and/or lightweight structures as well as product individualisation and functional integration. As such it is a promising approach with respect to the future design and manufacturing of complex 3dim structures. On the other hand, it certainly calls for new methods and standards in view of quality assessment. In particular, when utilizing AM for the design of complex parts used in aviation and aerospace technologies, appropriate monitoring systems are mandatory. In this respect, recently, sustainable progress has been accomplished by joining the common efforts and concerns of a manufacturer Additive Manufacturing systems and respective materials (EOS), along with those of an operator of such systems (MTU Aero Engines) and experienced application engineers (Carl Metrology), using decent know how in the field of optical and infrared methods regarding non-destructive-examination (NDE). The newly developed technology is best described by a high-resolution layer by layer inspection technique, which allows for a 3D tomography-analysis of the complex part at any time during the manufacturing process. Thereby, inspection costs are kept rather low by using smart image-processing methods as well as CMOS sensors instead of infrared detectors. Moreover, results from conventional physical metallurgy may easily be correlated with the predictive results of the monitoring system which not only allows for improvements of the AM monitoring system, but finally leads to an optimisation of the quality and insurance of material security of the complex structure being manufactured. Both, our poster and our oral presentation will explain the data flow between the above mentioned parties involved. A suitable monitoring system for Additive Manufacturing will be introduced, along with a presentation of the respective high resolution data acquisition, as well as the image processing and the data analysis allowing for a precise control of the 3dim growth-process.

36 MATERIALS SCIENCE↗

Compact silicon photonic wavelength-tunable laser diode with ultra-wide wavelength tuning range

We present a wavelength-tunable laser diode with a 99-nm-wide wavelength tuning range. It has a compact wavelength-tunable filter with high wavelength selectivity fabricated using silicon photonics technology. The silicon photonic wavelength-tunable filter with wide wavelength tuning range was realized using two ring resonators and an asymmetric Mach-Zehnder interferometer. The wavelength-tunable laser diode fabricated by butt-joining a silicon photonic filter and semiconductor optical amplifier shows stable single-mode operation over a wide wavelength range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The microstructure of aluminum A5083 butt joint by friction stir welding

This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coulomb excitations for a short linear chain of metallic shells

A self-consistent-field theory is given for the electronic collective modes of a chain containing a finite number, N, of Coulomb-coupled spherical two-dimensional electron gases arranged with their centers along a straight line, for simulating electromagnetic response of a narrow-ribbon of metallic shells. The separation between nearest-neighbor shells is arbitrary and because of the quantization of the electron energy levels due to their confinement to the spherical surface, all angular momenta L of the Coulomb excitations, as well as their projections M on the quantization axis, are coupled. However, for incoming light with a given polarization, only one angular momentum quantum number is usually required. Therefore, the electromagnetic response of the narrow-ribbon of metallic shells is expected to be controlled externally by selecting different polarizations for incident light. We show that, when N = 3, the next-nearest-neighbor Coulomb coupling is larger than its value if they are located at opposite ends of a right-angle triangle forming the triad. Additionally, the frequencies of the plasma excitations are found to depend on the orientation of the line joining them with respect to the axis of quantization since the magnetic field generated from the induced oscillating electric dipole moment on one sphere can couple to the induced magnetic dipole moment on another. Although the transverse inter-shell electromagnetic coupling can be modeled by an effective dynamic medium, the longitudinal inter-shell Coulomb coupling, on the other hand, can still significantly modify the electromagnetic property of this effective medium between shells.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self similar solution of superradiant amplification of ultrashort laser pulses in plasma

Based on the self-similar method, superradiant amplification of ultrashort laser pulses by the counterpropagating pump in a plasma is investigated. Here, we present a governing system of partial differential equations for the signal pulse and the motion of the electrons. These equations are transformed to ordinary differential equations by the self-similar method and numerically solved. It is found that the increase of the signal intensity is proportional to the square of the propagation distance and the signal frequency has a red shift. Also, depending on the pulse width, the signal breaks up into a train of short pulses or its duration decreases with the inverse square root of the distance. Moreover, we identified two distinct categories of the electrons by the phase space analysis. In the beginning, one of them is trapped in the ponderomotive potential well and oscillates while the other is untrapped. Over time, electrons of the second kind also join to the trapped electrons. In the potential well, the electrons are bunched to form an electron density grating which reflects the pump pulse into the signal pulse. It is shown that the backscattered intensity is enhanced with the increase of the electron bunching parameter which leads to the enhanced efficiency of superradiant amplification.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of oxygen diffusion kinetics during thin film ruthenium oxidation

In situ X-ray reflectivity was used to reveal oxygen diffusion kinetics for thermal oxidation of polycrystalline ruthenium thin films and accurate determination of activation energies for this process. Diffusion rates in nanometer thin RuO{sub 2} films were found to show Arrhenius behaviour. However, a gradual decrease in diffusion rates was observed with oxide growth, with the activation energy increasing from about 2.1 to 2.4 eV. Further exploration of the Arrhenius pre-exponential factor for diffusion process revealed that oxidation of polycrystalline ruthenium joins the class of materials that obey the Meyer-Neldel rule.

36 MATERIALS SCIENCE↗

Derivative discontinuity with localized Hartree-Fock potential

The localized Hartree-Fock potential has proven to be a computationally efficient alternative to the optimized effective potential, preserving the numerical accuracy of the latter and respecting the exact properties of being self-interaction free and having the correct −1/r asymptotics. In this paper we extend the localized Hartree-Fock potential to fractional particle numbers and observe that it yields derivative discontinuities in the energy as required by the exact theory. The discontinuities are numerically close to those of the computationally more demanding Hartree-Fock method. Our potential enjoys a “direct-energy” property, whereby the energy of the system is given by the sum of the single-particle eigenvalues multiplied by the corresponding occupation numbers. The discontinuities c{sub ↑} and c{sub ↓} of the spin-components of the potential at integer particle numbers N{sub ↑} and N{sub ↓} satisfy the condition c{sub ↑}N{sub ↑} + c{sub ↓}N{sub ↓} = 0. Thus, joining the family of effective potentials which support a derivative discontinuity, but being considerably easier to implement, the localized Hartree-Fock potential becomes a powerful tool in the broad area of applications in which the fundamental gap is an issue.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Valuation of Indonesian catastrophic earthquake bonds with generalized extreme value (GEV) distribution and Cox-Ingersoll-Ross (CIR) interest rate model

Indonesia is a country with high risk of earthquake, because of its position in the border of earth’s tectonic plate. An earthquake could raise very high amount of damage, loss, and other economic impacts. So, Indonesia needs a mechanism for transferring the risk of earthquake from the government or the (reinsurance) company, as it could collect enough money for implementing the rehabilitation and reconstruction program. One of the mechanisms is by issuing catastrophe bond, ‘act-of-God bond’, or simply CAT bond. A catastrophe bond issued by a special-purpose-vehicle (SPV) company, and then sold to the investor. The revenue from this transaction is joined with the money (premium) from the sponsor company and then invested in other product. If a catastrophe happened before the time-of-maturity, cash flow from the SPV to the investor will discounted or stopped, and the cash flow is paid to the sponsor company to compensate their loss because of this catastrophe event. When we consider the earthquake only, the amount of discounted cash flow could determine based on the earthquake’s magnitude. A case study with Indonesian earthquake magnitude data show that the probability of maximum magnitude can model by generalized extreme value (GEV) distribution. In pricing this catastrophe bond, we assumed stochastic interest rate that following the Cox-Ingersoll-Ross (CIR) interest rate model. We develop formulas for pricing three types of catastrophe bond, namely zero coupon bonds, ‘coupon only at risk’ bond, and ‘principal and coupon at risk’ bond. Relationship between price of the catastrophe bond and CIR model’s parameter, GEV’s parameter, percentage of coupon, and discounted cash flow rule then explained via Monte Carlo simulation.

58 GEOSCIENCES↗

Review on failure prediction techniques of composite single lap joint

Adhesive bonding is the most appropriate joining method in construction of composite structures. The use of reliable design and prediction technique will produce better performance of bonded joints. Several papers from recent papers and journals have been reviewed and synthesized to understand the current state of the art in this area. It is done by studying the most relevant analytical solutions for composite adherends with start of reviewing the most fundamental ones involving beam/plate theory. It is then extended to review single lap joint non linearity and failure prediction and finally on the failure prediction on composite single lap joint. The review also encompasses the finite element modelling part as tool to predict the elastic response of composite single lap joint and failure prediction numerically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stochastic behavior of nanoscale dielectric wall buckling

The random buckling patterns of nanoscale dielectric walls are analyzed using a nonlinear multi-scale stochastic method that combines experimental measurements with simulations. The dielectric walls, approximately 200 nm tall and 20 nm wide, consist of compliant, low dielectric constant (low-k) fins capped with stiff, compressively stressed TiN lines that provide the driving force for buckling. The deflections of the buckled lines exhibit sinusoidal pseudoperiodicity with amplitude fluctuation and phase decorrelation arising from stochastic variations in wall geometry, properties, and stress state at length scales shorter than the characteristic deflection wavelength of about 1000 nm. The buckling patterns are analyzed and modeled at two length scales: a longer scale (up to 5000 nm) that treats randomness as a longer-scale measurable quantity, and a shorter-scale (down to 20 nm) that treats buckling as a deterministic phenomenon. Statistical simulation is used to join the two length scales. Through this approach, the buckling model is validated and material properties and stress states are inferred. In particular, the stress state of TiN lines in three different systems is determined, along with the elastic moduli of low-k fins and the amplitudes of the small-scale random fluctuations in wall properties—all in the as-processed state. The important case of stochastic effects giving rise to buckling in a deterministically sub-critical buckling state is demonstrated. The nonlinear multiscale stochastic analysis provides guidance for design of low-k structures with acceptable buckling behavior and serves as a template for how randomness that is common to nanoscale phenomena might be measured and analyzed in other contexts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗